arXiv subjects

O. Ficker

Publications and source records attributed to O. Ficker.

5 recordsLinked to original sources

arXiv2026

Evolution of SPI-induced disruptions in ASDEX Upgrade

Disruptions are a major concern for future fusion reactors based on the tokamak principle. To ensure machine protection, the thermal loads and vessel forces that arise during disruptions have to be mitigated reliably. For the ITER disruption mitigation system (DMS), the shattered pellet injection (SPI) technology has been selected. It can provide a prompt delivery of the injection material into the plasma core, with the mitigation efficiency depending on fragment size and velocity. A highly flexible SPI system was built and installed at the tokamak ASDEX Upgrade (AUG) to aid the finalization process of the ITER DMS and provide crucial input for modeling. The SPI-induced disruptions in the 2022 AUG experiments follow a typical chain of events, which are discussed in this paper: The first light, main fragment arrival, plasma movement event, MARFE, thermal quench/plasma current spike, current quench, and vertical displacement event phase. Depending on the injection parameters, these phases may vary significantly or some might not be present at all. In this paper, we will focus on the characterization of these disruption phases and figures of merit for the mitigation efficiency, depending on the SPI configuration. With increasing amount of assimilated neon in the plasma - primarily influenced by the neon content in the pellet but also the shattering parameters - the disruptions exhibit different behaviors. This disruption evolution seems to be a continuous process, with the most prominent feature being the changing disruption time scales and plasma current time trace shape during the CQ from convex (poorly or unmitigated) $\rightarrow$ concave (well mitigated/radiation dominated). Depending on the injection, pre-TQ durations between 15 - 0.5 ms and early CQ durations ($\Delta \textrm{t}_\textrm{CQ}^{100 \rightarrow 80}$) between 13.3 - 8.2 ms had been achieved at AUG.

physics.plasm-ph↗

arXiv2026

Quantitative 3D non-linear simulations of shattered pellet injection in ASDEX Upgrade using JOREK

Shattered pellet injection (SPI) as primary mitigation method for major disruptions in ITER has a large parameter space available for optimization including the total amount of injected material, the size of the individual pellet fragments, the material composition, and the timing of multiple injections. This flexibility needs to be exploited to simultaneously minimize thermal heat loads, electromagnetic vessel forces, and formation of relativistic electrons and their impacts on plasma facing components. In this article, we apply 3D non-linear magnetohydrodynamic modelling to SPI experiments in the ASDEX Upgrade tokamak, going beyond our previous work [Tang et al Nucl. Fusion 65 116003 (2025)] by resolving some discrepancies between simulations and experiment and thus opening the path to quantitative model validation and experiment interpretation. The key element that enables the transition from merely qualitative comparisons to quantitatively reliable predictions of the thermal quench duration and the radiation fraction is the incorporation of a simplified treatment of parallel heat-flux limiting. The work increases the confidence of matching the key processes of disruption mitigation with this high fidelity modelling in view of predictive studies for ITER.

physics.plasm-ph↗

arXiv2026

Variability of MHD Instabilities in Benign Termination of High-Current Runaway Electron Beams in the JET and DIII-D Tokamaks

Benign termination, in which magnetohydrodynamic (MHD) instabilities deconfine runaway electrons (REs) following hydrogenic injections, is a promising strategy for mitigating dangerous RE loads after disruptions. Recent experiments on the Joint European Torus (JET) have explored this scenario at higher pre-disruptive plasma currents than are achievable on other devices, revealing challenges in obtaining benign terminations at $I_p \geq 2.5$ MA. This work analyzes the evolution of these high-current RE beams and their terminating MHD events using fast magnetic sensor measurements and EFIT equilibrium reconstructions for approximately $40$ JET and $20$ DIII-D tokamak discharges. On JET, unsuccessful non-benign terminations occur at low edge safety factor ($q_{\text{edge}} \approx 2$), and are preceded by intermittent, non-terminating MHD events at higher rational $q_{\text{edge}}$. Trends in the internal inductance $l_i$ indicate more peaked RE current profiles in the high-$I_p$ non-benign population, which may hinder successful recombination through re-ionization. In contrast, benign terminations on JET typically occur at higher $q_{\text{edge}} \geq 3$ and exhibit less peaked RE current profiles. DIII-D displays a range of terminating edge safety factors, correlated with the measured $l_i$ values. Across both tokamaks, the RE current peaking is therefore found to determine which MHD instability boundary is encountered, confirmed by linear resistive MHD modeling with the CASTOR3D code. Measured growth rates are similar for benign and non-benign cases, indicating that ideal MHD timescales at low density after hydrogenic injection do not alone explain efficient RE deconfinement. Instead, non-benign cases are characterized by their lower MHD perturbation amplitudes $\delta B$. These observations suggest that the interplay between ideal and resistive dynamics governs the termination process.

physics.plasm-ph↗

arXiv2025

Runaway electron-induced plasma facing component damage in tokamaks

This Roadmap article addresses the critical and multifaceted challenge of plasma-facing component (PFC) damage caused by runaway electrons (REs) in tokamaks, a phenomenon that poses a significant threat to the viability and longevity of future fusion reactors such as ITER and DEMO. The dramatically increased RE production expected in future high-current tokamaks makes it difficult to avoid or mitigate REs when a plasma discharge terminates abnormally. Preventing damage from the intense localised heat loads REs can cause requires a holistic approach that considers plasma, REs and PFC damage. Despite decades of progress in understanding the physics of REs and the thermomechanical response of PFCs, their complex interplay remains poorly understood. This document aims to initiate a coordinated, interdisciplinary approach to bridge this gap by reviewing experimental evidence, advancing diagnostic capabilities, and improving modelling tools across different scales, dimensionalities and fidelities. Key topics include RE beam formation and transport, damage mechanisms in brittle and metallic PFCs, and observations in major facilities such as JET, DIII-D, WEST and EAST. The Roadmap emphasises the urgency of predictive, high-fidelity modelling validated against well-diagnosed controlled experiments, particularly in the light of recent changes in ITER's wall material strategy and the growing importance of private sector initiatives. Each section of the article is written to provide a concise overview of one area of this multidisciplinary subject, with an assessment of the status, a look at current and future challenges, and a brief summary. The ultimate goal of this initiative is to guide future mitigation strategies and design resilient components that can withstand the loads imposed by REs, thus ensuring the safe and sustainable operation of the next generation of fusion power plants.

physics.plasm-ph↗

arXiv2024

Expulsion of runaway electrons using ECRH in the TCV tokamak

Runaway electrons (REs) are a concern for tokamak fusion reactors from discharge startup to termination. A sudden localized loss of a multi-megaampere RE beam can inflict severe damage to the first wall. Should a disruption occur, the existence of a RE seed may play a significant role in the formation of a RE beam and the magnitude of its current. The application of central electron cyclotron resonance heating (ECRH) in the Tokamak \`a Configuration Variable (TCV) reduces an existing RE seed population by up to three orders of magnitude within only a few hundred milliseconds. Applying ECRH before a disruption can also prevent the formation of a post-disruption RE beam in TCV where it would otherwise be expected. The RE expulsion rate and consequent RE current reduction are found to increase with applied ECRH power. Whereas central ECRH is effective in expelling REs, off-axis ECRH has a comparatively limited effect. A simple 0-D model for the evolution of the RE population is presented that explains the effective ECRH-induced RE expulsion results from the combined effects of increased electron temperature and enhanced RE transport.

physics.plasm-ph↗