arXiv subjects

Norbert Stoop

Publications and source records attributed to Norbert Stoop.

14 recordsLinked to original sources

arXiv2018

Inverse Design of Discrete Mechanical Metamaterials

Mechanical and phononic metamaterials exhibiting negative elastic moduli, gapped vibrational spectra, or topologically protected modes enable precise control of structural and acoustic functionalities. While much progress has been made in their experimental and theoretical characterization, the inverse design of mechanical metamaterials with arbitrarily programmable spectral properties and mode localization remains an unsolved problem. Here, we present a flexible computational inverse-design framework that allows the efficient tuning of one or more gaps at nearly arbitrary positions in the spectrum of discrete phononic metamaterial structures. The underlying algorithm optimizes the linear response of elastic networks directly, is applicable to ordered and disordered structures, scales efficiently in 2D and 3D, and can be combined with a wide range of numerical optimization schemes. We illustrate the broad practical potential of this approach by designing mechanical bandgap switches that open and close pre-programmed spectral gaps in response to an externally applied stimulus such as shear or compression. We further show that the designed structures can host topologically protected edge modes, and validate the numerical predictions through explicit 3D finite element simulations of continuum elastica with experimentally relevant material parameters. Generally, this network-based inverse design paradigm offers a direct pathway towards manufacturing phononic metamaterials, DNA origami structures and topolectric circuits that can realize a wide range of static and dynamic target functionalities.

cond-mat.mtrl-sci↗

arXiv2018

Controlling fracture cascades through twisting and quenching

Fracture limits the structural stability of macroscopic and microscopic materials, from beams and bones to microtubules and nanotubes. Despite recent progress, fracture control continues to present profound practical and theoretical challenges. A famous longstanding problem posed by Feynman asks why brittle elastic rods appear almost always to fragment into at least three pieces when placed under large bending stresses. Feynman's observation raises fundamental questions about the existence of protocols that can robustly induce binary fracture in brittle materials. Using experiments, simulations and analytical scaling arguments, we demonstrate controlled binary fracture of brittle elastic rods for two distinct protocols based on twisting and nonadiabatic quenching. Our experimental data for twist-controlled fracture agree quantitatively with a theoretically predicted phase diagram. Furthermore, we establish novel asymptotic scaling relations for quenched fracture. Due to their general character, these results are expected to apply to torsional and kinetic fracture processes in a wide range of systems.

cond-mat.soft↗

arXiv2017

Geometry of wave propagation on active deformable surfaces

Fundamental biological and biomimetic processes, from tissue morphogenesis to soft robotics, rely on the propagation of chemical and mechanical surface waves to signal and coordinate active force generation. The complex interplay between surface geometry and contraction wave dynamics remains poorly understood, but will be essential for the future design of chemically-driven soft robots and active materials. Here, we couple prototypical chemical wave and reaction-diffusion models to non-Euclidean shell mechanics to identify and characterize generic features of chemo-mechanical wave propagation on active deformable surfaces. Our theoretical framework is validated against recent data from contractile wave measurements on ascidian and starfish oocytes, producing good quantitative agreement in both cases. The theory is then applied to illustrate how geometry and preexisting discrete symmetries can be utilized to focus active elastic surface waves. We highlight the practical potential of chemo-mechanical coupling by demonstrating spontaneous wave-induced locomotion of elastic shells of various geometries. Altogether, our results show how geometry, elasticity and chemical signaling can be harnessed to construct dynamically adaptable, autonomously moving mechanical surface wave guides.

cond-mat.soft↗

arXiv2017

Curvature-Induced Instabilities of Shells

Induced by proteins within the cell membrane or by differential growth, heating, or swelling, spontaneous curvatures can drastically affect the morphology of thin bodies and induce mechanical instabilities. Yet, the interaction of spontaneous curvature and geometric frustration in curved shells remains still poorly understood. Via a combination of precision experiments on elastomeric spherical bilayer shells, simulations, and theory, we show a spontaneous curvature-induced rotational symmetry-breaking as well as a snapping instability reminiscent of the Venus fly trap closure mechanism. The instabilities and their dependence on geometry are rationalized by reducing the spontaneous curvature to an effective mechanical load. This formulation reveals a combined pressurelike bulk term and a torquelike boundary term, allowing scaling predictions for the instabilities in excellent agreement with experiments and simulations. Moreover, the effective pressure analogy suggests a curvature-induced buckling in closed shells. We determine the critical buckling curvature via a linear stability analysis that accounts for the combination of residual membrane and bending stresses. The prominent role of geometry in our findings suggests the applicability of the results over a wide range of scales.

cond-mat.soft↗

arXiv2017

Kibble-Zurek mechanism in curved elastic surface crystals

Topological defects shape the material and transport properties of physical systems. Examples range from vortex lines in quantum superfluids, defect-mediated buckling of graphene, and grain boundaries in ferromagnets and colloidal crystals, to domain structures formed in the early universe. The Kibble-Zurek (KZ) mechanism describes the topological defect formation in continuous non-equilibrium phase transitions with a constant finite quench rate. Universal KZ scaling laws have been verified experimentally and numerically for second-order transitions in planar Euclidean geometries, but their validity for discontinuous first-order transitions in curved and topologically nontrivial systems still poses an open question. Here, we use recent experimentally confirmed theory to investigate topological defect formation in curved elastic surface crystals formed by stress-quenching a bilayer material. Studying both spherical and toroidal crystals, we find that the defect densities follow KZ-type power laws independent of surface geometry and topology. Moreover, the nucleation sequences agree with recent experimental observations for spherical colloidal crystals. These results suggest that KZ scaling laws hold for a much broader class of dynamical phase transitions than previously thought, including non-thermal first-order transitions in non-planar geometries.

cond-mat.soft↗

arXiv2016

Curvature-Driven Morphing of Non-Euclidean Shells

We investigate how thin structures change their shape in response to non-mechanical stimuli that can be interpreted as variations in the structure's natural curvature. Starting from the theory of non-Euclidean plates and shells, we derive an effective model that reduces a three-dimensional stimulus to the natural fundamental forms of the mid-surface of the structure, incorporating expansion, or growth, in the thickness. Then, we apply the model to a variety of thin bodies, from flat plates to spherical shells, obtaining excellent agreement between theory and numerics. We show how cylinders and cones can either bend more or unroll, and eventually snap and rotate. We also study the nearly-isometric deformations of a spherical shell and describe how this shape change is ruled by the geometry of a spindle. As the derived results stem from a purely geometrical model, they are general and scalable.

cond-mat.soft↗

arXiv2015

Curvature-controlled defect localization in crystalline wrinkling patterns

We investigate the influence of curvature and topology on crystalline wrinkling patterns in generic elastic bilayers. Our numerical analysis predicts that the total number of defects created by adiabatic compression exhibits universal quadratic scaling for spherical, ellipsoidal and toroidal surfaces over a wide range of system sizes. However, both the localization of individual defects and the orientation of defect chains depend strongly on the local Gaussian curvature and its gradients across a surface. Our results imply that curvature and topology can be utilized to pattern defects in elastic materials, thus promising improved control over hierarchical bending, buckling or folding processes. Generally, this study suggests that bilayer systems provide an inexpensive yet valuable experimental test-bed for exploring the effects of geometrically induced forces on assemblies of topological charges.

cond-mat.soft↗

arXiv2015

Simulating Thin Sheets: Buckling, Wrinkling, Folding and Growth

Numerical simulations of thin sheets undergoing large deformations are computationally challenging. Depending on the scenario, they may spontaneously buckle, wrinkle, fold, or crumple. Nature's thin tissues often experience significant anisotropic growth, which can act as the driving force for such instabilities. We use a recently developed finite element model to simulate the rich variety of nonlinear responses of Kirchhoff-Love sheets. The model uses subdivision surface shape functions in order to guarantee convergence of the method, and to allow a finite element description of anisotropically growing sheets in the classical Rayleigh-Ritz formalism. We illustrate the great potential in this approach by simulating the inflation of airbags, the buckling of a stretched cylinder, as well as the formation and scaling of wrinkles at free boundaries of growing sheets. Finally, we compare the folding of spatially confined sheets subject to growth and shrinking confinement to find that the two processes are equivalent.

cond-mat.soft↗

arXiv2015

Nonlinear buckling and symmetry breaking of a soft elastic sheet sliding on a cylindrical substrate

We consider the axial compression of a thin sheet wrapped around a rigid cylindrical substrate. In contrast to the wrinkling-to-fold transitions exhibited in similar systems, we find that the sheet always buckles into a single symmetric fold, while periodic solutions are unstable. Upon further compression, the solution breaks symmetry and stabilizes into a recumbent fold. Using linear analysis and numerics, we theoretically predict the buckling force and energy as a function of the compressive displacement. We compare our theory to experiments employing cylindrical neoprene sheets and find remarkably good agreement.

cond-mat.soft↗

arXiv2012

Subdivision Shell Elements with Anisotropic Growth

A thin shell finite element approach based on Loop's subdivision surfaces is proposed, capable of dealing with large deformations and anisotropic growth. To this end, the Kirchhoff-Love theory of thin shells is derived and extended to allow for arbitrary in-plane growth. The simplicity and computational efficiency of the subdivision thin shell elements is outstanding, which is demonstrated on a few standard loading benchmarks. With this powerful tool at hand, we demonstrate the broad range of possible applications by numerical solution of several growth scenarios, ranging from the uniform growth of a sphere, to boundary instabilities induced by large anisotropic growth. Finally, it is shown that the problem of a slowly and uniformly growing sheet confined in a fixed hollow sphere is equivalent to the inverse process where a sheet of fixed size is slowly crumpled in a shrinking hollow sphere in the frictionless, quasi-static, elastic limit.

math.NA↗

arXiv2012

Morphogenesis of membrane invaginations in spherical confinement

We study the morphology of a fluid membrane in spherical confinement. When the area of the membrane is slightly larger than the area of the outer container, a single axisymmetric invagination is observed. For higher area, self-contact occurs: the invagination breaks symmetry and deforms into an ellipsoid-like shape connected to its outer part via a small slit. For even higher areas, a second invagination forms inside the original invagination. The folding patterns observed could constitute basic building blocks in the morphogenesis of biological tissues and organelles.

physics.bio-ph↗

arXiv2011

Finite Element Simulation of Dense Wire Packings

A finite element program is presented to simulate the process of packing and coiling elastic wires in two- and three-dimensional confining cavities. The wire is represented by third order beam elements and embedded into a corotational formulation to capture the geometric nonlinearity resulting from large rotations and deformations. The hyperbolic equations of motion are integrated in time using two different integration methods from the Newmark family: an implicit iterative Newton-Raphson line search solver, and an explicit predictor-corrector scheme, both with adaptive time stepping. These two approaches reveal fundamentally different suitability for the problem of strongly self-interacting bodies found in densely packed cavities. Generalizing the spherical confinement symmetry investigated in recent studies, the packing of a wire in hard ellipsoidal cavities is simulated in the frictionless elastic limit. Evidence is given that packings in oblate spheroids and scalene ellipsoids are energetically preferred to spheres.

cond-mat.soft↗

arXiv2010

Self-contact and instabilities in the anisotropic growth of elastic membranes

We investigate the morphology of thin discs and rings growing in the circumferential direction. Recent analytical results suggest that this growth produces symmetric excess cones (e-cones). We study the stability of such solutions considering self-contact and bending stress. We show that, contrary to what was assumed in previous analytical solutions, beyond a critical growth factor, no symmetric \textit{e}-cone solution is energetically minimal any more. Instead, we obtain skewed e-cone solutions having lower energy, characterized by a skewness angle and repetitive spiral winding with increasing growth. These results are generalized to discs with varying thickness and rings with holes of different radii.

physics.bio-ph↗

arXiv2007

Optimized Broad-Histogram Ensembles for the Simulation of Quantum Systems

The efficiency of statistical sampling in broad-histogram Monte Carlo simulations can be considerably improved by optimizing the simulated extended ensemble for fastest equilibration. Here we describe how a recently developed feedback algorithm can be generalized to find optimized sampling distributions for the simulation of quantum systems in the context of the stochastic series expansion (SSE) when defining an extended ensemble in the expansion order. If the chosen update method is efficient, such as non-local updates for systems undergoing a second-order phase transition, the optimized ensemble is characterized by a flat histogram in the expansion order if a variable-length formulation of the SSE is used. Whenever the update method suffers from slowdown, such as at a first-order phase transition, the feedback algorithm shifts weight towards the expansion orders in the transition region, resulting in a non-uniform histogram.

cond-mat.stat-mech↗