arXiv subjects

Noah Schnitzer

Publications and source records attributed to Noah Schnitzer.

At least 19 recordsLinked to original sources

arXiv2026

Breaking symmetry to create a parallel-plate varactor dielectric with unparalleled microwave performance

Voltage-tunable capacitors (varactors) are key to microwave circuits. Tunable dielectric varactors outperform competing technologies in almost every relevant metric but usually suffer from high dielectric loss. In contrast, Ruddlesden-Popper (RPs) dielectric thin films have remarkably low microwave loss. Unfortunately, their crystallographic symmetry has until recently dictated an in-plane device structure, precluding the favorable out-of-plane parallel-plate varactor design for minimized size and maximized electric field in the tunable dielectric. Guided by theory, we report RPs akin to the widely studied tunable microwave dielectric BaxSr1-xTiO3. Assembling these same atoms into the first RP phase with broken out-of-plane symmetry, we achieve a low-loss, out-of-plane tunable dielectric thin film. The highest performing film, (ATiO3)nAO film with A = Ba0.45Sr0.55 and n = 8, unlocks a tenfold improvement in the figure of merit for out-of-plane tunable dielectrics at 10 GHz, paving the way for a new generation of tunable monolithic microwave integrated circuits.

cond-mat.mtrl-sci↗

arXiv2026

Crystallography of periodic nanotextures in a strained Mott insulator

Here we investigate stripes of alternating structural phases spontaneously forming in epitaxially strained $Ca_2RuO_4$ thin films below the metal-insulator transition. Using large-volume X-ray reciprocal-space mapping, we show that satellite-pattern intensities across 24 symmetry-inequivalent Bragg reflections collapse onto a single parameter-free curve. The collapse identifies a coherent martensitic laminate of few-nm-wide domains separated by ${012}$ interfaces, with displacements along $\left\langle01\bar{2}\right\rangle$. Satellite-extinction analysis demonstrates that both coexisting phases retain the bulk orthorhombic space group despite the pseudocubic $LaAlO_3$ substrate, biaxial epitaxial strain, and intrinsic strain at the interfaces. Classical invariant-plane-strain crystallography thus governs the nanoscale domain geometry of a Mott insulator with intertwined magnetic, electronic, and lattice order.

cond-mat.mtrl-sci↗

arXiv2026

Polar Topologies in a Ferroelastic Metal Membrane

Polar metals, materials in which electric polarisation and metallicity coexist, are exceptionally rare because itinerant electrons screen long-range dipoles and favour centrosymmetric structures. Engineering polar textures in a conducting magnet holds promise for reconfigurable spin orbit coupling and magnetoelectric functionality. Here we show that releasing epitaxial SrRuO3 films from their substrates drives a hierarchy of ferroelastic domain refinement from micrometre to nanometre length scales, and that this structural reorganisation spontaneously generates two distinct classes of emergent polar texture that are ubiquitous across the freestanding membrane. Using correlative microscopy from mesoscale electron channelling contrast imaging (ECCI) to atomic resolution scanning transmission electron microscopy (STEM), we demonstrate that electric polarisation emerges selectively at translation-inequivalent antiphase boundaries (APBs). At these boundaries multicomponent aac tilt field undergoes Neel-like interpolation that preserves the in-phase tilt component and amplifies roto flexoelectric coupling, while translation-equivalent boundaries remain nonpolar. The Neel like interpolation at hard APBs and Ising like collapse of all tilt components at easy APBs is corroborated with ab initio calculations. While embedded 90 ferroelastic walls provide an additional mechanistically distinct source of electric polarisation resulting in polar nanoclusters (4 nm). These distinct nanotextures at 90 walls from via elastic accommodation of strain mismatch between variants and rotostriction as the tilt field interpolates across the boundaries. These findings show that, in a membrane form, metal oxides provide a robust platform for hosting nanoscale ferroelastic domains that generate polar textures.

cond-mat.mtrl-sci↗

arXiv2026

Coherent spin waves in a maximal entropy phase

In solids, disorder is conventionally regarded as detrimental to coherence. It typically localizes and dampens collective excitations, as exemplified by Anderson localization or the broadening of magnetic modes in systems lacking long-range order. While high-entropy materials are specifically designed to harness disorder and stabilize homogeneous mixed-phase structures that can display unique properties, this same disorder is nonetheless expected to preclude the formation of coherent magnetic excitations. To test the limits of this picture, we selected the antiferromagnetic system YBaCuFeO5, as it features two distinct transition metal atoms with significantly different magnetic moments, rendering its spin dynamics exceptionally sensitive to local atomic ordering. Combining resonant inelastic x-ray scattering and linear spin wave theory, we reveal a surprising paradox: YBaCuFeO5 exhibits an unexpected, entropy-driven mixed phase, in which disorder, rather than reducing the lifetime of the collective excitations, favors coherence. In this mixed phase, the spin waves remain dispersive, markedly distinct from those expected for an ordered ground state, and exhibit well-defined acoustic and optical branches separated by a large optical gap. These results demonstrate that in entropy-stabilized magnets, disorder can favor coherent collective modes previously thought to be exclusive to low-entropy systems.

cond-mat.str-el↗

arXiv2026

Helium-Cooled Cryogenic STEM Imaging and Ptychography for Atomic-Scale Study of Low-Temperature Phases

Much of the exotic functionality of prime interest in quantum materials emerges from structural and electronic ground states that can only be accessed at cryogenic temperatures. Understanding device operation therefore requires structural characterization under the same low-temperature conditions at which these functional phases exist, as room-temperature measurements often probe a different structural state. Achieving atomic-resolution in scanning transmission electron microscopy imaging and particularly 4D-STEM electron ptychography at liquid helium temperature has remained extremely challenging because even small amounts of drift, vibration, and thermal instability associated with the cryogen can disrupt the stringent stability requirements of atomic-resolution STEM. In this work we demonstrate atomic-resolution STEM and multislice electron ptychography at temperatures as low as 20 K using a commercial helium cooled holder. We find that rapid scans and a multi-stage registration workflow are critical to reducing artifacts associated with cryogenic instability for atomic-resolution imaging, while for ptychography scan position correction including compensation for coupling between probe aberrations and position refinement is necessary for successful reconstructions. Together these results establish a pathway for reliable atomic-resolution STEM and ptychography at low temperature, enabling direct visualization of structural ground states relevant to quantum technology.

cond-mat.mtrl-sci↗

arXiv2026

Synthesis of epitaxial TaO$_2$ thin films on Al$_2$O$_3$ by suboxide molecular-beam epitaxy and thermal laser epitaxy

Tantalum dioxide (TaO2) is a metastable tantalum compound. Here, we report the epitaxial stabilization of TaO2 on Al2O3 (1-102) (r-plane sapphire) substrates using suboxide molecular-beam epitaxy (MBE) and thermal laser epitaxy (TLE), demonstrating single-oriented, monodomain growth of anisotropically strained thin films. Microstructural investigation is performed using synchrotron X-ray diffraction and scanning transmission electron microscopy. The tetravalent oxidation state of tantalum is confirmed using X-ray absorption and photoemission spectroscopy as well as electron energy-loss spectroscopy. Optical properties are investigated via spectroscopic ellipsometry and reveal a 0.3 eV Mott gap of the tantalum 5d electrons. Density-functional theory and group theoretical arguments are used to evaluate the limited stability of the rutile phase and reveal the potential to unlock a hidden metal-insulator transition concomitant with a structural phase transition to a distorted rutile phase, akin to NbO2. Our work expands the understanding of tantalum oxides and paves the way for their integration into next-generation electronic and photonic devices.

cond-mat.mtrl-sci↗

arXiv2025

What causes the variation in superconducting properties of UTe$_{2}$?

Reaching a consensus on the superconducting order parameter of unconventional superconductors remains a central challenge in the field of magnetically-mediated superconductivity. Though UTe$_{2}$ is largely accepted as a rare example of an odd-parity superconductor, its precise order parameter remains highly debated, even at ambient conditions. A key underlying issue is the large sample-to-sample variation in superconducting properties at zero applied pressure and magnetic field. Here, we investigate the origin of the observed variation by means of single crystal x-ray diffraction (SC-XRD) and scanning transmission electron microscopy (STEM) measurements. Our results reveal highly ordered crystalline lattices, in agreement with the expected $Immm$ structure, and no signs of uranium vacancies. Tiny amounts of interstitial defects, however, are observed on the Te2 layers that host Te chains along the b axis. We argue that these defects give rise to slightly enhanced atomic displacement parameters observed in SC-XRD data and are enough to disrupt the unconventional superconducting state in UTe$_{2}$. Our findings highlight the need to focus future order parameter determination efforts on single crystals of UTe$_{2}$ with minimal amounts of structural disorder.

cond-mat.supr-con↗

arXiv2025

Melting point depression of charge density wave in 1T-TiSe$_2$ due to size effects

Classical nucleation theory predicts size-dependent nucleation and melting due to surface and confinement effects at the nanoscale. In correlated electronic states, observation of size-dependent nucleation and melting is rarely reported, likely due to the extremely small length scales necessary to observe such effects for electronic states. Here, using 1T-TiSe$_2$ nanoflakes as a prototypical two-dimensional (2D) charge density wave (CDW) system, we perform in-situ cryogenic electron microscopy with temperature down to 20 K and observe size-dependent nucleation and melting of CDWs. Specifically, we observe a melting point depression of CDW for 1T-TiSe$_2$ flakes with lateral sizes less than 100 nm. By fitting experimental data to a Ginzburg-Landau model, we estimate a zero-temperature correlation length of 10--50 nm, which matches the reported CDW domain size for 1T-TiSe$_2$. As the flake size approaches the correlation length, the divergence of the CDW correlation length near the transition is cut off by the finite flake size, limiting long-range order and thereby lowering the transition temperature. For very small flakes whose size is close to the correlation length, we also observe absence of CDWs, as predicted by the model. We thus show that an electronic phase transition follows classical nucleation theory.

cond-mat.mtrl-sci↗

arXiv2025

Unconventional superlattice ordering in intercalated transition metal dichalcogenide V$_{1/3}$NbS$_2$

The interplay between symmetry and topology in magnetic materials makes it possible to engineer exotic phases and technologically useful properties. A key requirement for these pursuits is achieving control over local crystallographic and magnetic structure, usually through sample morphology (such as synthesis of bulk crystals versus thin-films) and application of magnetic or electric fields. Here we show that V$_{1/3}$NbS$_2$ can be crystallized in two ordered superlattices, distinguished by the periodicity of out-of-plane magnetic intercalants. Whereas one of these structures is metallic and displays the hallmarks of altermagnetism, the other superlattice, which has not been isolated before in this family of intercalation compounds, is a semimetallic noncollinear antiferromagnet that may enable access to topologically nontrivial properties. This observation of an unconventional superlattice structure establishes a powerful route for tailoring the tremendous array of magnetic and electronic behaviors hosted in related materials.

cond-mat.mtrl-sci↗

arXiv2025

Putative excitonic insulating state in narrow-gap semiconductor La$_3$Cd$_2$As$_6$

Excitonic insulators are electronically-driven phases of matter characterized by the spontaneous condensation of electron-hole pairs. Here we show that La$_3$Cd$_2$As$_6$ undergoes a transition at $T_{0}=278$ K to a highly insulating state with no accompanying structural transition. We observe quasi-two-dimensional electrical transport and charge fluctuations consistent with an electronic transition enabled by enhanced Coulomb interactions. Density functional theory calculations are unable to replicate the insulating ground state. Our results support the opening of a gap by excitonic effects at $T_{0}$, placing La$_3$Cd$_2$As$_6$ as a rare example of a bulk excitonic insulator.

cond-mat.str-el↗

arXiv2025

Quantitative approaches for multi-scale structural analysis with atomic resolution electron microscopy

Atomic-resolution imaging with scanning transmission electron microscopy is a powerful tool for characterizing the nanoscale structure of materials, in particular features such as defects, local strains, and symmetry-breaking distortions. In addition to advanced instrumentation, the effectiveness of the technique depends on computational image analysis to extract meaningful features from complex datasets recorded in experiments, which can be complicated by the presence of noise and artifacts, small or overlapping features, and the need to scale analysis over large representative areas. Here, we present image analysis approaches which synergize real and reciprocal space information to efficiently and reliably obtain meaningful structural information with picometer scale precision across hundreds of nanometers of material from atomic-resolution electron microscope images. Damping superstructure peaks in reciprocal space allows symmetry-breaking structural distortions to be disentangled from other sources of inhomogeneity and measured with high precision. Real space fitting of the wave-like signals resulting from Fourier filtering enables absolute quantification of lattice parameter variations and strain, as well as the uncertainty associated with these measurements. Implementations of these algorithms are made available as an open source Python package.

cond-mat.mtrl-sci↗

arXiv2025

Resolving Structural Origins for Superconductivity in Strain-Engineered La$_3$Ni$_2$O$_7$ Thin Films

The discovery of high-temperature superconductivity in bulk La$_3$Ni$_2$O$_7$ under high hydrostatic pressure and, more recently, biaxial compression in epitaxial thin films has ignited significant interest in understanding the interplay between atomic and electronic structure in these compounds. Subtle changes in the nickel-oxygen bonding environment are thought to be key drivers for stabilizing superconductivity, but specific details of which bonds and which modifications are most relevant remains so far unresolved. While direct, atomic-scale structural characterization under hydrostatic pressure is beyond current experimental capabilities, static stabilization of strained La$_3$Ni$_2$O$_7$ films provides a platform well-suited to investigation with new picometer-resolution electron microscopy methods. Here, we use multislice electron ptychography to directly measure the atomic-scale structural evolution of La$_3$Ni$_2$O$_7$ thin films across a wide range of biaxial strains tuned via substrate. By resolving both the cation and oxygen sublattices, we study strain-dependent evolution of atomic bonds, providing the opportunity to isolate and disentangle the effects of specific structural motifs for stabilizing superconductivity. We identify the lifting of crystalline symmetry through modification of the nickel-oxygen octahedral distortions under compressive strain as a key structural ingredient for superconductivity. Rather than previously supposed $c$-axis compression, our results highlight the importance of in-plane biaxial compression in superconducting thin films, which suggests an alternative -- possibly cuprate-like -- understanding of the electronic structure. Identifying local regions of inhomogeneous oxygen stoichiometry and high internal strain near crystalline defects, we suggest potential pathways for improving the sharpness and temperature of the superconducting transition.

cond-mat.supr-con↗

arXiv2024

Atomic-scale tracking of topological defect motion and incommensurate charge order melting

Charge order pervades the phase diagrams of quantum materials where it competes with superconducting and magnetic phases, hosts electronic phase transitions and topological defects, and couples to the lattice generating intricate structural distortions. Incommensurate charge order is readily stabilized in manganese oxides where it is associated with anomalous electronic and magnetic properties, but its nanoscale structural inhomogeneity complicates precise characterization and understanding of its relationship with competing phases. Leveraging atomic-resolution variable temperature cryogenic scanning transmission electron microscopy, we characterize the thermal evolution of charge order as it transforms from its ground state in a model manganite system. We find that mobile networks of discommensurations and dislocations generate phase inhomogeneity and induce global incommensurability in an otherwise lattice-locked modulation. Driving the order to melt at high temperatures, the discommensuration density grows and regions of order locally decouple from the lattice periodicity.

cond-mat.str-el↗

arXiv2023

In operando cryo-STEM of pulse-induced charge density wave switching in TaS$_2$

The charge density wave (CDW) material 1T-TaS$_2$ exhibits a pulse-induced insulator-to-metal transition, which shows promise for next-generation electronics such as memristive memory and neuromorphic hardware. However, the rational design of TaS$_2$ devices is hindered by a poor understanding of the switching mechanism, the pulse-induced phase, and the influence of material defects. Here, we operate a 2-terminal TaS$_2$ device within a scanning transmission electron microscope (STEM) at cryogenic temperature, and directly visualize the changing CDW structure with nanoscale spatial resolution and down to 300 {\mu}s temporal resolution. We show that the pulse-induced transition is driven by Joule heating, and that the pulse-induced state corresponds to nearly commensurate and incommensurate CDW phases, depending on the applied voltage amplitude. With our in operando cryo-STEM experiments, we directly correlate the CDW structure with the device resistance, and show that dislocations significantly impact device performance. This work resolves fundamental questions of resistive switching in TaS$_2$ devices critical for engineering reliable and scalable TaS$_2$ electronics.

cond-mat.mtrl-sci↗

arXiv2023

Endotaxial Stabilization of 2D Charge Density Waves with Long-range Order

Charge density waves are emergent quantum states that spontaneously reduce crystal symmetry, drive metal-insulator transitions, and precede superconductivity. In low-dimensions, distinct quantum states arise, however, thermal fluctuations and external disorder destroy long-range order. Here we stabilize ordered two-dimensional (2D) charge density waves through endotaxial synthesis of confined monolayers of 1T-TaS$_2$. Specifically, an ordered incommensurate charge density wave (oIC-CDW) is realized in 2D with dramatically enhanced amplitude and resistivity. By enhancing CDW order, the hexatic nature of charge density waves becomes observable. Upon heating via in-situ TEM, the CDW continuously melts in a reversible hexatic process wherein topological defects form in the charge density wave. From these results, new regimes of the CDW phase diagram for 1T-TaS$_2$ are derived and consistent with the predicted emergence of vestigial quantum order.

cond-mat.mtrl-sci↗

arXiv2022

Real-space imaging of polar and elastic nano-textures in thin films via inversion of diffraction data

Exploiting the emerging nanoscale periodicities in epitaxial, single-crystal thin films is an exciting direction in quantum materials science: confinement and periodic distortions induce novel properties. The structural motifs of interest are ferroelastic, ferroelectric, multiferroic, and, more recently, topologically protected magnetization and polarization textures. A critical step towards heterostructure engineering is understanding their nanoscale structure, best achieved through real-space imaging. X-ray Bragg coherent diffractive imaging visualizes sub-picometer crystalline displacements with tens of nanometers spatial resolution. Yet, it is limited to objects spatially confined in all three dimensions and requires highly coherent, laser-like x-rays. Here we lift the confinement restriction by developing real-space imaging of periodic lattice distortions: we combine an iterative phase retrieval algorithm with unsupervised machine learning to invert the diffuse scattering in conventional x-ray reciprocal-space mapping into real-space images of polar and elastic textures in thin epitaxial films. We first demonstrate our imaging in PbTiO3/SrTiO3 superlattices to be consistent with published phase-field model calculations. We then visualize strain-induced ferroelastic domains emerging during the metal-insulator transition in Ca2RuO4 thin films. Instead of homogeneously transforming into a low-temperature structure (like in bulk), the strained Mott insulator splits into nanodomains with alternating lattice constants, as confirmed by cryogenic scanning transmission electron microscopy. Our study reveals the type, size, orientation, and crystal displacement field of the nano-textures. The non-destructive imaging of textures promises to improve models for their dynamics and enable advances in quantum materials and microelectronics.

cond-mat.mtrl-sci↗

arXiv2022

Ronchigram Simulation and Training through Ronchigram.com

This article introduces a training simulator for electron beam alignment using Ronchigrams. The interactive web application, www.ronchigram.com, is an advanced educational tool aimed at making scanning transmission electron microscopy (STEM) more accessible and open. For experienced microscopists, the tool offers on-hand quantification of simulated Ronchigrams and their resolution limits.

physics.ins-det↗

arXiv2021

Ultrafast Modulations And Detection of a Ferro-rotational Charge Density Wave Using Time-resolved Electric Quadrupole Second Harmonic Generation

We show the ferro-rotational nature of the commensurate charge density wave (CCDW) in $1T$-$\mathrm{TaS}_2$ and track its dynamic modulations by temperature-dependent and time-resolved electric quadrupole rotation anisotropy-second harmonic generation (EQ RA-SHG), respectively. The ultrafast modulations manifest as the breathing and the rotation of the EQ RA-SHG patterns at three frequencies around the reported single CCDW amplitude mode frequency. A sudden shift of the triplet frequencies and a dramatic increase in the breathing and rotation magnitude further reveal a photo-induced transient CDW phase across a critical pump fluence of ~ 0.5 mJ/cm$^2$.

cond-mat.mtrl-sci↗