arXiv Science⌕ Search

arXiv subjects

Ning Lu

Publications and source records attributed to Ning Lu.

At least 73 records · Page 4Linked to original sources

Load Profile Inpainting for Missing Load Data Restoration and Baseline Estimation

This paper introduces a Generative Adversarial Nets (GAN) based, Load Profile Inpainting Network (Load-PIN) for restoring missing load data segments and estimating the baseline for a demand response event. The inputs are time series load data before and after the inpainting period together with explanatory variables (e.g., weather data). We propose a Generator structure consisting of a coarse network and a fine-tuning network. The coarse network provides an initial estimation of the data segment in the inpainting period. The fine-tuning network consists of self-attention blocks and gated convolution layers for adjusting the initial estimations. Loss functions are specially designed for the fine-tuning and the discriminator networks to enhance both the point-to-point accuracy and realisticness of the results. We test the Load-PIN on three real-world data sets for two applications: patching missing data and deriving baselines of conservation voltage reduction (CVR) events. We benchmark the performance of Load-PIN with five existing deep-learning methods. Our simulation results show that, compared with the state-of-the-art methods, Load-PIN can handle varying-length missing data events and achieve 15-30% accuracy improvement.

eess.SP↗

SigT: An Efficient End-to-End MIMO-OFDM Receiver Framework Based on Transformer

Multiple-input multiple-output and orthogonal frequency-division multiplexing (MIMO-OFDM) are the key technologies in 4G and subsequent wireless communication systems. Conventionally, the MIMO-OFDM receiver is performed by multiple cascaded blocks with different functions and the algorithm in each block is designed based on ideal assumptions of wireless channel distributions. However, these assumptions may fail in practical complex wireless environments. The deep learning (DL) method has the ability to capture key features from complex and huge data. In this paper, a novel end-to-end MIMO-OFDM receiver framework based on \textit{transformer}, named SigT, is proposed. By regarding the signal received from each antenna as a token of the transformer, the spatial correlation of different antennas can be learned and the critical zero-shot problem can be mitigated. Furthermore, the proposed SigT framework can work well without the inserted pilots, which improves the useful data transmission efficiency. Experiment results show that SigT achieves much higher performance in terms of signal recovery accuracy than benchmark methods, even in a low SNR environment or with a small number of training samples. Code is available at https://github.com/SigTransformer/SigT.

cs.NI↗

An ICA-Based HVAC Load Disaggregation Method Using Smart Meter Data

This paper presents an independent component analysis (ICA) based unsupervised-learning method for heat, ventilation, and air-conditioning (HVAC) load disaggregation using low-resolution (e.g., 15 minutes) smart meter data. We first demonstrate that electricity consumption profiles on mild-temperature days can be used to estimate the non-HVAC base load on hot days. A residual load profile can then be calculated by subtracting the mild-day load profile from the hot-day load profile. The residual load profiles are processed using ICA for HVAC load extraction. An optimization-based algorithm is proposed for post-adjustment of the ICA results, considering two bounding factors for enhancing the robustness of the ICA algorithm. First, we use the hourly HVAC energy bounds computed based on the relationship between HVAC load and temperature to remove unrealistic HVAC load spikes. Second, we exploit the dependency between the daily nocturnal and diurnal loads extracted from historical meter data to smooth the base load profile. Pecan Street data with sub-metered HVAC data were used to test and validate the proposed methods.Simulation results demonstrated that the proposed method is computationally efficient and robust across multiple customers.

eess.SY↗

Feeder Microgrid Management on an Active Distribution System during a Severe Outage

Forming a microgrid on a distribution system with large scale outage after a severe weather event is emerging as a viable solution to improve resiliency at the distribution level. This option becomes more attractive when the distribution system has high levels of distributed PV. The management of such feeder-level microgrid has however many challenges, such as limited resources that can be deployed on the feeder quickly, and the limited real-time monitoring and control on the distribution system. Effective use of the distributed PV is also challenging as they are not monitored and controlled. To handle these challenges, the paper proposes a 2-stage hierarchical energy management scheme to securely operate these feeder level micorgrids. The first stage of the scheme solves a sequential rolling optimization problem to optimally schedule the main resources (such as a mobile diesel generator and battery storage unit). The second stage adopts a dispatching scheme for the main resources to adjust the stage-1 set-points closer to real- time. The proposed scheme has unique features to assure that the scheme is robust under highly varying operating conditions with limited system observability: (i) an innovative PV forecast error adjustment and a dynamic reserve adjustment scheme to handle the extreme uncertainty on PV power output, and (ii) an intelligent fuel management scheme to assure that the resources are utilized optimally over the multiple days of the restoration period. The proposed algorithm is tested on sample system with real-time data. The results show that the proposed scheme performs well in maximizing service to loads by effective use of all the resources and by properly taking into account the challenging operating conditions.

eess.SY↗

A TCN-based Hybrid Forecasting Framework for Hours-ahead Utility-scale PV Forecasting

This paper presents a Temporal Convolutional Network (TCN) based hybrid PV forecasting framework for enhancing hours-ahead utility-scale PV forecasting. The hybrid framework consists of two forecasting models: a physics-based trend forecasting (TF) model and a data-driven cloud-event forecasting (CF) model. Three TCNs are integrated in the framework for: i) blending the inputs from different Numerical Weather Prediction sources for the TF model to achieve superior performance on forecasting hourly PV profiles, ii) capturing spatial-temporal correlations between detector sites and the target site in the CF model to achieve more accurate forecast of intra-hour PV power drops, and iii) reconciling TF and CF results to obtain coherent hours-ahead PV forecast with both hourly trends and intra-hour fluctuations well preserved. To automatically identify the most contributive neighboring sites for forming a detector network, a scenario-based correlation analysis method is developed, which significantly improves the capability of the CF model on capturing large power fluctuations caused by cloud movements. The framework is developed, tested, and validated using actual PV data collected from 95 PV farms in North Carolina. Simulation results show that the performance of 6 hours ahead PV power forecasting is improved by approximately 20% compared with state-of-the-art methods.

eess.SP↗

On-Demand Resource Management for 6G Wireless Networks Using Knowledge-Assisted Dynamic Neural Networks

On-demand service provisioning is a critical yet challenging issue in 6G wireless communication networks, since emerging services have significantly diverse requirements and the network resources become increasingly heterogeneous and dynamic. In this paper, we study the on-demand wireless resource orchestration problem with the focus on the computing delay in orchestration decision-making process. Specifically, we take the decision-making delay into the optimization problem. Then, a dynamic neural network (DyNN)-based method is proposed, where the model complexity can be adjusted according to the service requirements. We further build a knowledge base representing the relationship among the service requirements, available computing resources, and the resource allocation performance. By exploiting the knowledge, the width of DyNN can be selected in a timely manner, further improving the performance of orchestration. Simulation results show that the proposed scheme significantly outperforms the traditional static neural network, and also shows sufficient flexibility in on-demand service provisioning.

eess.SY↗

Training Quantized Deep Neural Networks via Cooperative Coevolution

This work considers a challenging Deep Neural Network(DNN) quantization task that seeks to train quantized DNNs without involving any full-precision operations. Most previous quantization approaches are not applicable to this task since they rely on full-precision gradients to update network weights. To fill this gap, in this work we advocate using Evolutionary Algorithms (EAs) to search for the optimal low-bits weights of DNNs. To efficiently solve the induced large-scale discrete problem, we propose a novel EA based on cooperative coevolution that repeatedly groups the network weights based on the confidence in their values and focuses on optimizing the ones with the least confidence. To the best of our knowledge, this is the first work that applies EAs to train quantized DNNs. Experiments show that our approach surpasses previous quantization approaches and can train a 4-bit ResNet-20 on the Cifar-10 dataset with the same test accuracy as its full-precision counterpart.

cs.NE↗

Ultra-High Lithium Storage Capacity of Al2C Monolayer under Restricted Multilayered Growth Mechanism

Designing anode materials with high lithium specific capacity is crucial to the development of high energy-density lithium ion batteries. Herein, a distinctive lithium growth mechanism, namely, the restricted multilayered growth for lithium, and a strategy for lithium storage are proposed to achieve the balance between the ultra-high specific capacity and the need to avert uncontrolled dendritic growth of lithium. In particular, based on first-principles computation, we show that the Al2C monolayer with planar tetracoordinate carbon structure can be an ideal platform for realizing the restricted multilayered growth mechanism as a 2D anode material. Furthermore, the Al2C monolayer exhibits ultra-high specific capacity of lithium of 4059 mAh/g, yet with a low dif-fusion barrier of 0.039-0.17 eV as well as low open circuit voltage in the range of 0.002-0.34 V. These novel properties endow the Al2C monolayer a promising anode material for future lithium ion batteries. Our study offers a new way to design promising 2D anode materials with high specific capacity, fast lithium-ion diffusion, and safe lithium storage mechanism.

cond-mat.mtrl-sci↗

Anisotropic Electrene T'-Ca2P with Electron Gas Magnetic Coupling as Anode Material for Na/K Ion Batteries

There is an urgently need for the high-performance rechargeable electrical storage devices as supplement or substitutions of lithium ion batteries due to the shortage of lithium in nature. Herein we propose a stable 2D electrene T'-Ca2P as anode material for Na/K ion batteries by first-principle calculations. Our calculated results show that T'-Ca2P monolayer is an antiferromagnetic semiconducting electrene with spin-polarized electron gas. It exhibits suitable adsorption for both Na and K atoms, and its anisotropic migration energy barriers are 0.050/0.101 eV and 0.037/0.091 eV in b/a direction, respectively. The theoretical capacities for Na and K are both 482 mAh/g, while the average working voltage platforms are 0.171-0.226 V and 0.013-0.267 V, respectively. All the results reveal that the T'-Ca2P monolayer has promised application prospects as anode materials for Na/K ion batteries.

cond-mat.mtrl-sci↗

SA-HMTS: A Secure and Adaptive Hierarchical Multi-timescale Framework for Resilient Load Restoration Using A Community Microgrid

Distribution system integrated community microgrids (CMGs) can partake in restoring loads during extended duration outages. At such times, the CMG is challenged with limited resource availability, absence of robust grid support, and heightened demand-supply uncertainty. This paper proposes a secure and adaptive three-stage hierarchical multi-timescale framework for scheduling and real-time (RT) dispatch of CMGs with hybrid PV systems to address these challenges. The framework enables the CMG to dynamically expand its boundary to support the neighboring grid sections and is adaptive to the changing forecast error impacts. The first stage solves a stochastic extended duration scheduling (EDS) problem to obtain referral plans for optimal resource rationing. The intermediate near-real-time (NRT) scheduling stage updates the EDS schedule closer to the dispatch time using newly obtained forecasts, followed by the RT dispatch stage. To make the dispatch decisions more secure and robust against forecast errors, a novel concept called delayed recourse is proposed. The methodology is evaluated via numerical simulations on a modified IEEE 123-bus system and validated using OpenDSS/hardware-in-loop simulations. The results show superior performance in maximizing load supply and continuous secure CMG operation under numerous operating scenarios.

eess.SY↗

ProfileSR-GAN: A GAN based Super-Resolution Method for Generating High-Resolution Load Profiles

It is a common practice for utilities to down-sample smart meter measurements from high resolution (e.g. 1-min or 1-sec) to low resolution (e.g. 15-, 30- or 60-min) to lower the data transmission and storage cost. However, down-sampling can remove high-frequency components from time-series load profiles, making them unsuitable for in-depth studies such as quasi-static power flow analysis or non-intrusive load monitoring (NILM). Thus, in this paper, we propose ProfileSR-GAN: a Generative Adversarial Network (GAN) based load profile super-resolution (LPSR) framework for restoring high-frequency components lost through the smoothing effect of the down-sampling process. The LPSR problem is formulated as a Maximum-a-Prior problem. When training the ProfileSR-GAN generator network, to make the generated profiles more realistic, we introduce two new shape-related losses in addition to conventionally used content loss: adversarial loss and feature-matching loss. Moreover, a new set of shape-based evaluation metrics are proposed to evaluate the realisticness of the generated profiles. Simulation results show that ProfileSR-GAN outperforms Mean-Square Loss based methods in all shape-based metrics. The successful application in NILM further demonstrates that ProfileSR-GAN is effective in recovering high-resolution realistic waveforms.

eess.SP↗

The Regulated NiCu Cycles with the new $^{57}$Cu(p,$γ$)$^{58}$Zn reaction rate and the Influence on Type-I X-Ray Bursts: GS 1826$-$24 Clocked Burster

During the X-ray bursts of GS 1826$-$24, "clocked burster", the nuclear reaction flow that surges through the rapid-proton capture process path has to pass through the NiCu cycles before reaching the ZnGa cycles that moderate the further extent of hydrogen burning in the region above germanium and selenium isotopes. The $^{57}$Cu(p,$γ$)$^{58}$Zn reaction located in the NiCu cycles plays an important role in influencing the burst light curves as found by Cyburt et al. (2016). We deduce the $^{57}$Cu(p,$γ$)$^{58}$Zn reaction rate based on the experimentally determined important nuclear structure information, isobaric-multiplet-mass equation, and large-scale shell model calculations. Based on the isobaric-multiplet-mass equation, we propose a possible order of $1^+_1$ and $2^+_3$ dominant resonance states and constrain the resonance energy of the $1^+_2$ state. The latter reduces the contribution of the $1^+_2$ dominant resonance state. The new reaction rate is up to a factor of four lower than the Forstner et al. (2001) rate recommended by JINA REACLIB v2.2 at the temperature regime sensitive to clocked bursts of GS 1826$-$24. Using the simulation from the one-dimensional implicit hydrodynamic code, KEPLER, to model the thermonuclear X-ray bursts of GS 1826$-$24 clocked burster, we find that the new $^{57}$Cu(p,$γ$)$^{58}$Zn coupled with the latest $^{56}$Ni(p,$γ$)$^{57}$Cu and $^{55}$Ni(p,$γ$)$^{56}$Cu reaction rates redistributes the reaction flow in the NiCu cycles and strongly influences the burst ash composition, whereas the $^{59}$Cu(p,$α$)$^{56}$Ni and $^{59}$Cu(p,$γ$)$^{60}$Zn reactions suppress the influence of the $^{57}$Cu(p,$γ$)$^{58}$Zn reaction and diminish the impact of nuclear reaction flow that by-passes the important $^{56}$Ni waiting point induced by the $^{55}$Ni(p,$γ$)$^{56}$Cu reaction on burst light curve.

astro-ph.HE↗

The Impact of the New $^{65\!}$As(p,$γ$)$^{66\!}$Se Reaction Rate on the Two-Proton Sequential Capture of $^{64}\!$Ge, Weak GeAs Cycles, and Type-I X-Ray Bursts such as the Clocked Burster GS 1826$-$24

We re-assess $^{65}$As(p,$γ$)$^{66}$Se reaction rates based on a set of proton thresholds of $^{66}$Se, $S_\mathrm{p}$($^{66}$Se), estimated from the experimental mirror nuclear masses, theoretical mirror displacement energies, and full $pf$-model space shell-model calculation. The self-consistent relativistic Hartree-Bogoliubov theory is employed to obtain the mirror displacement energies with much reduced uncertainty, and thus reducing the proton-threshold uncertainty up to 161 keV compared to the AME2020 evaluation. Using the simulation instantiated by the one-dimensional multi-zone hydrodynamic code, KEPLER, that closely reproduces the observed GS 1826$-$24 clocked bursts, the present forward and reverse $^{65}$As(p,$γ$)$^{66}$Se reaction rates based on a selected $S_\mathrm{p}$($^{66}$Se) = 2.469$\pm$0.054 MeV, and the latest $^{22}$Mg($α$,p)$^{25}$Al, $^{56}$Ni(p,$γ$)$^{57}$Cu(p,$γ$)$^{58}$Zn, $^{55}$Ni(p,$γ$)$^{56}$Cu, and $^{64}$Ge(p,$γ$)$^{65}$As reaction rates, we find that though the GeAs cycles is weakly established in the rapid-proton capture process path, the $^{65}$As(p,$γ$)$^{66}$Se reaction still strongly characterizes the burst tail end due to the two-proton sequential capture on $^{64}$Ge, not found by Cyburt et al. (2016) sensitivity study. The $^{65}$As(p,$γ$)$^{66}$Se reaction influences the abundances of nuclei $A$ = 64, 68, 72, 76, and 80 up to a factor of 1.4. The new $S_\mathrm{p}$($^{66}$Se) and the inclusion of the updated $^{22}$Mg($α$,p)$^{25}$Al reaction rate increases the production of $^{12}$C up to a factor of $4.5$ that is not observable and could be the main fuel for superburst. The waiting point status of and two-proton sequential capture on $^{64}$Ge, weak-cycle feature of GeAs at region heavier than $^{64}$Ge, and impact of other possible $S_\mathrm{p}$($^{66}$Se) are also discussed.

astro-ph.HE↗

Reinforcement Learning for Volt-Var Control: A Novel Two-stage Progressive Training Strategy

This paper develops a reinforcement learning (RL)approach to solve a cooperative, multi-agent Volt-Var Control (VVC) problem for high solar penetration distribution systems. The ingenuity of our RL method lies in a novel two-stage progressive training strategy that can effectively improve training speed and convergence of the machine learning algorithm. In Stage 1(individual training), while holding all the other agents inactive, we separately train each agent to obtain its own optimal VVC actions in the action space: {consume, generate, do-nothing}. In Stage 2 (cooperative training), all agents are trained again coordinatively to share VVC responsibility. Rewards and costs in our RL scheme include (i) a system-level reward (for taking an action), (ii) an agent-level reward (for doing-nothing), and(iii) an agent-level action cost function. This new framework allows rewards to be dynamically allocated to each agent based on their contribution while accounting for the trade-off between control effectiveness and action cost. The proposed methodology is tested and validated in a modified IEEE 123-bus system using realistic PV and load profiles. Simulation results confirm that the proposed approach is robust and computationally efficient; and it achieves desirable volt-var control performance under a wide range of operation conditions.

eess.SY↗

Efficient Combinatorial Optimization for Word-level Adversarial Textual Attack

Over the past few years, various word-level textual attack approaches have been proposed to reveal the vulnerability of deep neural networks used in natural language processing. Typically, these approaches involve an important optimization step to determine which substitute to be used for each word in the original input. However, current research on this step is still rather limited, from the perspectives of both problem-understanding and problem-solving. In this paper, we address these issues by uncovering the theoretical properties of the problem and proposing an efficient local search algorithm (LS) to solve it. We establish the first provable approximation guarantee on solving the problem in general cases.Extensive experiments involving 5 NLP tasks, 8 datasets and 26 NLP models show that LS can largely reduce the number of queries usually by an order of magnitude to achieve high attack success rates. Further experiments show that the adversarial examples crafted by LS usually have higher quality, exhibit better transferability, and can bring more robustness improvement to victim models by adversarial training.

cs.CL↗

A Novel Grid-forming Voltage Control Strategy for Supplying Unbalanced Microgrid Loads Using Inverter-based Resources

This paper presents a novel grid-forming voltage control strategy for a battery energy storage system to maintain balanced three-phase output voltages when serving unbalanced loads. A stationary reference frame ($αβ$) based control scheme is proposed to regulate positive-sequence and negative-sequence voltages. Compared with the conventional rotating reference frame ($dq$) based control scheme, the proposed scheme shows better dynamic performance. Then, we analyze the system zero-sequence network and propose adding a grounding transformer to the Y/Yg connected output transformer to further reduce the voltage unbalance at the point of common coupling. The simulation results demonstrate the effective performance of the proposed voltage control scheme. Based on the results, the power-voltage unbalance curve is derived for different output transformer configurations to establish the relationship between the power unbalance limit and the voltage unbalance limit for microgrid power scheduling.

eess.SY↗

A Novel Data Segmentation Method for Data-driven Phase Identification

This paper presents a smart meter phase identification algorithm for two cases: meter-phase-label-known and meter-phase-label-unknown. To improve the identification accuracy, a data segmentation method is proposed to exclude data segments that are collected when the voltage correlation between smart meters on the same phase are weakened. Then, using the selected data segments, a hierarchical clustering method is used to calculate the correlation distances and cluster the smart meters. If the phase labels are unknown, a Connected-Triple-based Similarity (CTS) method is adapted to further improve the phase identification accuracy of the ensemble clustering method. The methods are developed and tested on both synthetic and real feeder data sets. Simulation results show that the proposed phase identification algorithm outperforms the state-of-the-art methods in both accuracy and robustness.

eess.SY↗

Novel Real-Time EMT-TS Modeling Architecture for Feeder Blackstart Simulations

This paper presents the development and benchmarking of a novel real-time electromagnetic-transient and transient-stability (EMT-TS) modeling architecture for distribution feeder restoration studies. The work presents for the first time in the literature a real-time EMT-TS testbed in which the grid-forming unit is simulated in EMT domain, operating as the slack bus of the phasor domain while including unbalanced voltage conditions. To evaluate the performance and limitations of the proposed model, an equivalent EMT testbed is developed to serve as a benchmark. First, the co-simulation framework and the domain coupling methodology are introduced. Next, the steady-state operation of the EMT-TS and EMT models are matched. Then, tests are conducted to analyze the transient performance of the proposed EMT-TS model when compared to its EMT benchmark. Results reveal that when utilizing a battery energy storage system (BESS) as the grid-forming unit, the EMT-TS testbed can maintain high accuracy for typical load steps.

eess.SY↗