arXiv subjects

Nima Fazeli

Publications and source records attributed to Nima Fazeli.

At least 19 recordsLinked to original sources

arXiv2026

Exploring Proximity and Tactile Sensing for Robotic Manipulation

Pre-touch sensing, or sensing information about an object before contact, is an attractive modality for robot hands as it can allow a robot to anticipate and respond to a contact before it happens. In this work, we introduce ToFTouch, a multimodal tactile sensor combining three multizone (4$\times$4 resolution) time-of-flight sensors with an optics-based pressure sensing array. We mount this sensor on a parallel jaw gripper and demonstrate its utility on three distinct tasks: (i) pre-grasp adjustment, (ii) item extraction from clutter, and (iii) item insertion into tight spaces. For pre-grasp adjustment, ToF feedback reduced cycle time by 7.4$\%$ by enabling anticipatory gripper closure during approach. For extraction, ToF sensing enabled successful retrieval across all tested depth offsets ($\pm$2 cm) deviating from the nominal pick point, including conditions where baseline approaches failed, with standard deviations below 0.4 cm. For insertion into dense clutter, we explore the proximity and tactile information provided from ToFTouch during an insertion trajectory. The results demonstrate the utility of multizone ToF sensing in a manipulation environment.

cs.RO↗

arXiv2026

GelSlim 5.0: Unifying Vision and Touch with a Single Fingertip Camera

Vision and touch provide complementary cues for object pose and local contact geometry, but external cameras are often occluded at the contact site. We present GelSlim 5.0, a fingertip sensor that acquires visual and tactile observations with one fixed camera and a continuous UV-responsive contact layer. By switching illumination, the camera sequentially acquires through-membrane visual images and contact-sensitive tactile images from a shared viewpoint, avoiding inter-camera extrinsic calibration. To combine these observations, we introduce VisTacFusion, a multimodal transformer with separate prediction paths for planar object pose and contact geometry. Asymmetric bottleneck fusion incorporates visual context while preserving tactile spatial features for depth and surface-normal estimation. Modality dropout enables inference with paired inputs or either modality alone. On real validation data from 12 known objects, paired inputs reduce depth MSE, angular error, and translation $L_1$ by 61.2%, 72.3%, and 61.3%, respectively, relative to tactile-only inference with the same model. Relative to visual-only inference, the corresponding reductions are 93.7%, 6.1%, and 8.6%.

cs.RO↗

arXiv2026

PhysiCalWorld: In-Context Physics Calibration for World Models

Existing world models typically perceive a scene through current visual frame or a narrow history window. However, these observations may not reveal the physics properties that determine transition dynamics, such as an object's mass distribution, joint damping, or surface friction. Without calibrating these physics factors for world models, predictions tend to regress toward an empirical prior and induce severe drift in novel test scenes. To this end, we propose PhysiCalWorld, which calibrates action-conditioned world models to the instance-specific dynamics via in-context prompting, without fine-tuning or analytical physics modeling. Our method encodes an exploratory interaction clip collected within the test scene into a compact physics descriptor token, which grounds subsequent predictions in the scene's actual physical behavior. PhysiCalWorld is trained end-to-end with the latent prediction loss alone, without physics labels. At inference time, the descriptor token is extracted once and can be reused across rollouts with negligible compute overhead. We evaluate PhysiCalWorld across four environments covering diverse physics variations and show that it substantially improves rollout prediction accuracy and visual planning success rate. The learned descriptors also form a physically structured latent space and generalize beyond the physics ranges seen during training.

cs.RO↗

arXiv2026

HydroShear: Hydroelastic Shear Simulation for Tactile Sim-to-Real Reinforcement Learning

In this paper, we address the problem of tactile sim-to-real policy transfer for contact-rich tasks. Existing methods primarily focus on vision-based sensors and emphasize image rendering quality while providing overly simplistic models of force and shear. Consequently, these models exhibit a large sim-to-real gap for many dexterous tasks. Here, we present HydroShear, a non-holonomic hydroelastic tactile simulator that advances the state-of-the-art by modeling: a) stick-slip transitions, b) path-dependent force and shear build up, and c) full SE(3) object-sensor interactions. HydroShear extends hydroelastic contact models using Signed Distance Functions (SDFs) to track the displacements of the on-surface points of an indenter during physical interaction with the sensor membrane. Our approach generates physics-based, computationally efficient force fields from arbitrary watertight geometries while remaining agnostic to the underlying physics engine. In experiments with GelSight Minis, HydroShear more faithfully reproduces real tactile shear compared to existing methods. This fidelity enables zero-shot sim-to-real transfer of reinforcement learning policies across four tasks: peg insertion, bin packing, book shelving for insertion, and drawer pulling for fine gripper control under slip. Our method achieves a 93% average success rate, outperforming policies trained on tactile images (34%) and alternative shear simulation methods (58%-61%).

cs.RO↗

arXiv2026

ADEPT: Accelerating Dexterity via Pre-Training and Post-Training using Reinforcement Learning

We introduce Accelerating Dexterity via Pre-Training (ADEPT), a large-scale reinforcement learning (RL) framework for learning sim-to-real transferable dexterity across high degree-of-freedom (DoF) robot embodiments that can solve long-horizon tasks directly from raw visuo-tactile perception. ADEPT pretrains a dexterous policy on a generic object reposing task, then post-trains downstream policies with this pretrained behavior as a prior. ADEPT enables learning new behaviors that are otherwise difficult to discover from scratch on multi-fingered robots and avoids learning the same set of skills over again for every new downstream task. The pretrained policy zero-shots the reposing phase of downstream tasks, but naïve RL fine-tuning rapidly degrades this capability during transfer. We address this with a stable post-training recipe combining behavior-cloning distillation, critic warm-up, and conservative on-policy updates. To safely exploit the full kinematic dexterity, we introduce a joint-space Geometric Fabric that mediates between the RL policy and the robot. We distill post-trained teachers into perceptive students that zero-shot sim-to-real transfer on two embodiments: a 23 DoF Kuka-Allegro with two RGB cameras, and a 29 DoF Flexiv-Sharpa with two RGB cameras and five vision-based tactile sensors, and can solve long-horizon tasks from challenging initial states with dexterity at human-level speed.

cs.RO↗

arXiv2026

Whole-Body Dexterity

Current humanoid dexterous manipulation remains largely confined to end-effectors and simple grasps, falling short of humans' ability to engage the entire body by bracing and sliding bulky objects against the arms and torso. We introduce Whole-Body Dexterity (WBD), a general framework that uses the robot's body and appendages as contact surfaces to grasp and manipulate objects. Our sim-to-real pipeline first generates a dataset of feasible whole-body grasps, then trains reinforcement-learning experts on a general any-to-any repositioning objective by sampling initial and goal grasps from the dataset, and distills these experts into a single policy that uses proprioception and object geometry. We show that the distilled policy transfers zero-shot to a real Unitree G1, where it repositions a basketball and a cardboard box to regions around the torso and completes a long-horizon task that stows a box under one arm, carries it from a shelf to a table, and places it. The controller operates interactively, steered by coarse motion references from a human teleoperator. Across real-world whole-body manipulation tasks, the distilled controller completes 90% of trials, compared with 18% for direct retargeting and 4% for a generalist whole-body controller.

cs.RO↗

arXiv2026

Tactile-Guided Robot Learning: From Representation Learning to Foundation Models

Tactile sensing is becoming central to robust, adaptive, and dexterous robotic manipulation. Beyond its traditional role in contact detection and reactive control, touch is increasingly used to learn transferable representations, condition manipulation policies, and support embodied physical reasoning. Yet existing surveys largely emphasize tactile hardware and perception, leaving the rapid shift toward learning-based tactile manipulation insufficiently synthesized. This paper reviews tactile-guided skill learning from a learning-centric perspective, organized by the functional role of touch across the learning and control pipeline. We examine tactile representation and policy learning, tactile foundation models, predictive and adaptive control, and generalization across objects, tasks, sensors, embodiments, and simulation-to-real transfer. Across these directions, we identify common design principles and remaining challenges in learning transferable physical representations, integrating semantic reasoning with contact-level control, and scaling tactile learning across heterogeneous data and hardware. Finally, we outline emerging directions toward tactile foundation and world models that can predict, reason about, and adapt physical interactions. Together, this review characterizes the transition of touch from a task-specific feedback signal toward a core modality for general-purpose embodied intelligence. An accompanying database of the reviewed literature and associated resources is available at https://sites.google.com/view/touch-in-robot-learning-review.

cs.RO↗

arXiv2026

Tactile Sim2Real without Tactile Simulation via Bottlenecked Latent Reconstruction

Robot sensor designs, particularly tactile sensors, are highly diverse and evolve rapidly. Modeling each sensor in simulation demands substantial domain expertise and computational approximations can degrade the fidelity of the simulated signals. We propose Sim2Real via Bottlenecked Latent Reconstruction (SBLR), a framework that avoids sensor-specific simulation entirely by (1) training policies on a simulator-native oracle sensor that is easy to construct without modeling any particular sensor (e.g. we use a point-cloud and finger-tip forces as a tactile oracle), and (2) aligning real sensor latent embeddings to those of the oracle sensor at inference time. Policy training proceeds in two-stage: the policy first learns from the oracle sensor latents, then a bottlenecked latent reconstruction adapts it to the information loss expected when using the real sensor instead of the oracle. The alignment between oracle and real sensor is learned from unpaired random-play data collected in both simulation and the real world, using rectified-flow-based transformation networks trained on nearest-neighbor pseudo-pairs. Simulation experiments on three contact-rich tasks show that SBLR matches or approaches the performance of an oracle with direct access to tactile simulation. Hardware experiments on Peg Insertion and Gear Meshing with GelSight Mini and DIGIT sensors demonstrate 85-97.5% zero-shot success without requiring any sensor-specific modeling or calibration, outperforming a physics-based tactile simulation baseline by 7.5-15%.

cs.RO↗

arXiv2026

HULK: Learning Whole-Body Forceful Loco-Manipulation for Humanoids

Humanoid loco-manipulation of large, heavy objects demands forceful interaction across the entire body. However, such payloads shift a humanoid's center of mass and impose sustained loads across the upper body, challenging balance and command tracking. We present HULK, a whole-body control framework for forceful loco-manipulation. Using model predictive control (MPC) to guide reinforcement learning with predictions of the loaded dynamics, we train two teachers: one tracks arm motions under wrist forces, and the other locomotes while holding large objects against the body. A capture-point control barrier function augments the wrist-force teacher during training to improve balance under load. We distill both teachers into a single policy. Evaluation spans simulation and the Unitree G1. In simulation, the teacher with the barrier function achieves the lowest forward and lateral velocity tracking errors at 10 kg per arm among evaluated controllers and reduces aggregate divergent component of motion (DCM) excursion magnitude by 35.7% relative to MPC-guided reinforcement learning alone. Our wrist-force teacher withstands torso push disturbances of up to 130 N.

cs.RO↗

arXiv2026

ReDex: Repairing Sim-to-Real Dexterous Policies by Finger-Level Compliant Interaction

Dexterous manipulation policies trained in simulation often fail to transfer to the real world because of errors in contact timing and force regulation. Yet these policies can retain useful multi-finger coordination for task progression. We propose ReDex, a framework for adapting a simulation-trained base policy to the real world by correcting local contact failures and incorporating tactile feedback. Starting from a proprioception-only base policy, ReDex allows a human operator to physically correct contact failures at selected fingers under compliant control during real-world rollouts, while the frozen base policy continues to control the remaining fingers. These rollouts combine base policy execution, human-corrected finger motion, and fingertip force observations. We reconstruct force-informed targets from these rollouts to train a standalone force-conditioned policy via behavior cloning. This design reduces human correction effort, enables learning of contact regulation from real-world interaction, and introduces force feedback into a proprioception-only policy without tactile simulation or complex full-hand teleoperation. We evaluate ReDex on two challenging, contact-rich dexterous manipulation tasks on real hardware. Compared with sim-to-real transferred base policies, ReDex increases Object Flipping success rate from 14\% to 86\% across two objects and average Screwdriver Rotation progress from 26.0% to 95.3% across three objects.

cs.RO↗

arXiv2026

Learning Diffusion Policies for Robotic Manipulation of Timber Joinery under Fabrication Uncertainty

Fabrication uncertainty arising from tolerance accumulation, material imperfection, and positioning errors remains a critical barrier to automated robotic assembly in construction, particularly for contact-rich manipulation tasks under minimal geometric clearance. This paper investigates the deployment of diffusion policy learning on construction-scale industrial robots to enable robust, high-precision assembly under such uncertainty, using tight-clearance mortise and tenon timber joinery as a representative case study. Sensory-motor diffusion policies are trained using teleoperated demonstrations collected from an industrial robotic workcell equipped with force/torque sensing. A two-phase experimental study evaluates baseline performance and robustness under randomized positional perturbations up to 10 mm, far exceeding the joint clearance. The best-performing policy achieved 100% success under nominal conditions and 75% average success under uncertainty. These results suggest that diffusion policies can improve robustness to fabrication-induced misalignment, representing a step toward reliable robotic assembly in construction under tight tolerances.

cs.RO↗

arXiv2026

Scalable Open-Source Visuotactile Sensor for 6-Axis Contact Wrench Estimation in Tensegrity Robots

This paper presents a scalable, open-source visuotactile sensing system for tensegrity robots that enables six-axis wrench estimation and contact detection. The proposed endcap sensor integrates an elastomeric shell, a 3D-printed thermoplastic polyurethane (TPU) interface, and a rigid base housing an embedded camera and LED illumination ring. A novel gyroid-infill bonding technique is introduced to form a durable elastomer-TPU interface without adhesives, yielding a lightweight and modular design compatible with large-scale tensegrity structures. A tactile-to-wrench neural network maps shear vector fields to six-dimensional force and torque measurements. Experimental results demonstrate accurate and stable wrench estimation with a mean squared error (MSE) of 0.1531 on static validation data and out-of-domain generalization under dynamic motion. Furthermore, full-system integration on a 12 kg tensegrity robot confirms the sensor's ability to reliably identify ground contacts. The system substantially improves the practicality of tactile feedback for tensegrity robots, offering a low-cost, reproducible, and physically interpretable pathway toward contact-aware proprioception and state estimation. Open source files are available at \href{https://github.com/Jonathan-Twz/tensegrity-gelfoot}{github.com/Jonathan-Twz/tensegrity-gelfoot}

cs.RO↗

arXiv2026

TAP-VLA: Tactile Annotation Prompting for Vision Language Action Models

Vision-Language-Action (VLA) models demonstrate impressive reasoning over visual, semantic, and spatial task variations by leveraging large-scale vision and language pre-training. They remain, however, largely blind to contact forces, which seldom manifest clearly in visual feedback but are central to contact-rich manipulation. Tactile sensing measures these forces directly, but integrating it into VLAs is difficult: tactile data is absent from the large-scale corpora used to pre-train VLAs, so adding it as a new input modality induces a distribution shift that erodes the very pre-training that makes VLAs effective. We propose Tactile Annotation Prompting for Vision-Language-Action models (TAP-VLA), a simple framework that supplies tactile feedback through visual augmentation rather than architectural change. TAP-VLA extracts shear fields from visuo-tactile sensors and overlays them as spatially-grounded vectors onto the multi-view RGB images the policy already consumes, yielding a clear, interpretable tactile cue in the VLA's native observation space. Because the architecture is untouched, the approach requires no tactile pre-training, adds negligible compute, and stays close to the pre-training distribution. Across four contact-rich tasks, TAP-VLA succeeds on 78% of trials, compared to under 50% for vision-only fine-tuning and alternative tactile-fusion baselines -- including tasks where the baselines perform no better than chance.

cs.RO↗

arXiv2026

RoboMME: Benchmarking and Understanding Memory for Robotic Generalist Policies

Memory is critical for long-horizon and history-dependent robotic manipulation. Such tasks often involve counting repeated actions or manipulating objects that become temporarily occluded. Recent vision-language-action (VLA) models have begun to incorporate memory mechanisms; however, their evaluations remain confined to narrow, non-standardized settings. This limits systematic understanding, comparison, and progress measurement. To address these challenges, we introduce RoboMME: a large-scale standardized benchmark for evaluating and advancing VLA models in long-horizon, history-dependent scenarios. Our benchmark comprises 16 manipulation tasks constructed under a carefully designed taxonomy that evaluates temporal, spatial, object, and procedural memory. We further develop a suite of 14 memory-augmented VLA variants built on the π0.5 backbone to systematically explore different memory representations across multiple integration strategies. Experimental results show that the effectiveness of memory representations is highly task-dependent, with each design offering distinct advantages and limitations across different tasks. Videos and code can be found at our website https://robomme.github.io.

cs.RO↗

arXiv2026

Sound of Touch: Active Acoustic Tactile Sensing via String Vibrations

Distributed tactile sensing remains difficult to scale over large areas: dense sensor arrays increase wiring, cost, and fragility, while many alternatives provide limited coverage or miss fast interaction dynamics. We present Sound of Touch, an active acoustic tactile-sensing methodology that uses vibrating tensioned strings as sensing elements. The string is continuously excited electromagnetically, and a small number of pickups (contact microphones) observe spectral changes induced by contact. From short-duration audio signals, our system estimates contact location and normal force, and detects slip. To guide design and interpret the sensing mechanism, we derive a physics-based string-vibration simulator that predicts how contact position and force shift vibration modes. Experiments demonstrate millimeter-scale localization, reliable force estimation, and real-time slip detection. Our contributions are: (i) a lightweight, scalable string-based tactile sensing hardware concept for instrumenting extended robot surfaces; (ii) a physics-grounded simulation and analysis tool for contact-induced spectral shifts; and (iii) a real-time inference pipeline that maps vibration measurements to contact state.

cs.RO↗

arXiv2026

TactAlign: Human-to-Robot Policy Transfer via Tactile Alignment

Human demonstrations collected by wearable devices (e.g., tactile gloves) provide fast and dexterous supervision for policy learning, and are guided by rich, natural tactile feedback. However, a key challenge is how to transfer human-collected tactile signals to robots despite the differences in sensing modalities and embodiment. Existing human-to-robot (H2R) approaches that incorporate touch often assume identical tactile sensors, require paired data, and involve little to no embodiment gap between human demonstrator and the robots, limiting scalability and generality. We propose TactAlign, a cross-embodiment tactile alignment method that transfers human-collected tactile signals to a robot with different embodiment. TactAlign transforms human and robot tactile observations into a shared latent representation using a rectified flow, without paired datasets, manual labels, or privileged information. Our method enables low-cost latent transport guided by hand-object interaction-derived pseudo-pairs. We demonstrate that TactAlign improves H2R policy transfer across multiple contact-rich tasks (pivoting, insertion, lid closing), generalizes to unseen objects and tasks with human data (less than 5 minutes), and enables zero-shot H2R transfer on a highly dexterous tasks (light bulb screwing).

cs.RO↗

arXiv2025

GrOMP: Grasped Object Manifold Projection for Multimodal Imitation Learning of Manipulation

Imitation Learning (IL) holds great potential for learning repetitive manipulation tasks, such as those in industrial assembly. However, its effectiveness is often limited by insufficient trajectory precision due to compounding errors. In this paper, we introduce Grasped Object Manifold Projection (GrOMP), an interactive method that mitigates these errors by constraining a non-rigidly grasped object to a lower-dimensional manifold. GrOMP assumes a precise task in which a manipulator holds an object that may shift within the grasp in an observable manner and must be mated with a grounded part. Crucially, all GrOMP enhancements are learned from the same expert dataset used to train the base IL policy, and are adjusted with an n-arm bandit-based interactive component. We propose a theoretical basis for GrOMP's improvement upon the well-known compounding error bound in IL literature. We demonstrate the framework on four precise assembly tasks using tactile feedback, and note that the approach remains modality-agnostic. Data and videos are available at williamvdb.github.io/GrOMPsite.

cs.RO↗

arXiv2025

Simultaneous Extrinsic Contact and In-Hand Pose Estimation via Distributed Tactile Sensing

Prehensile autonomous manipulation, such as peg insertion, tool use, or assembly, require precise in-hand understanding of the object pose and the extrinsic contacts made during interactions. Providing accurate estimation of pose and contacts is challenging. Tactile sensors can provide local geometry at the sensor and force information about the grasp, but the locality of sensing means resolving poses and contacts from tactile alone is often an ill-posed problem, as multiple configurations can be consistent with the observations. Adding visual feedback can help resolve ambiguities, but can suffer from noise and occlusions. In this work, we propose a method that pairs local observations from sensing with the physical constraints of contact. We propose a set of factors that ensure local consistency with tactile observations as well as enforcing physical plausibility, namely, that the estimated pose and contacts must respect the kinematic and force constraints of quasi-static rigid body interactions. We formalize our problem as a factor graph, allowing for efficient estimation. In our experiments, we demonstrate that our method outperforms existing geometric and contact-informed estimation pipelines, especially when only tactile information is available. Video results can be found at https://tacgraph.github.io/.

cs.RO↗