arXiv subjects

Nikhil Kumar

Publications and source records attributed to Nikhil Kumar.

At least 19 recordsLinked to original sources

arXiv2026

Nanoscale Inclined Four-electrode Ion Traps: Finite-Element Modelling, Floquet Stability, and Surface-Potential Response

Developing miniaturised trapped-ion systems requires electrode architectures that provide controlled radio-frequency (RF) confinement while accounting for nanoscale features and surface-induced perturbations. Here, we present a finite-element investigation of an inclined four-blade RF ion-trap architecture for 171Yb+, combining pseudopotential characterisation, matrix Mathieu analysis, Floquet stability assessment, and localised surface-potential modelling. The architecture incorporates exposed electrode-face features of approximately 99-150 nm within an opposing-electrode separation of 20 um. At an electrode inclination of 6 degrees, an RF amplitude of 150 V, and a drive frequency of 15 MHz, the calculated pseudopotential exhibits directional in-plane barriers of 3.430 and 3.389 meV along the principal diagonal paths. The full RF-potential Hessian, including off-diagonal coupling terms, is used to construct the matrix Mathieu equation. Numerical propagation over one RF period identifies two dominant motional branches with secular-frequency estimates of 1.8137 and 1.8181 MHz. A third, predominantly axial branch exhibits a nominal frequency near 7.90 kHz, although its quantitative resolution is limited by the residual Hessian trace and phase-return drift. Additionally, a four-source electrostatic model is developed to investigate the effects of localised surface potentials on modal electric-field responses. Parametric analysis reveals correlation-dependent suppression and enhancement of normalised response coefficients, with multipliers ranging from approximately 0.5 to 1.5. This study establishes a computational framework for investigating nanoscale inclined blade-electrode architectures, their motional characteristics, and surface-potential responses, while highlighting numerical convergence requirements for reliable three-dimensional trap characterisation.

cond-mat.other↗

arXiv2026

Magnonic cavity-enhanced quantum magnetometry with nitrogen-vacancy centre ensembles

Nitrogen-vacancy (NV) centre ensembles are leading room-temperature magnetometers, but their sensitivity is usually extracted from a single resonance and relies on external microwave and bias-field hardware. This work proposes a chip-scale NV magnetometer built around a one-dimensional YIG/CoFeB magnonic crystal, in which a single structural defect forms a passive magnonic cavity and integrated permanent magnets supply the bias field. Micromagnetic simulations show a defect-localised spin-wave mode at 2.910 GHz inside the 2.5-3.0 GHz magnonic band gap, 40 MHz from the NV zero-field splitting, with a band structure that matches an independent plane-wave calculation. A Tavis-Cummings/Lindblad model in which the microwave reaches the NV ensemble through this mode predicts a hyperfine-resolved optically detected magnetic resonance spectrum that is strong only within the mode linewidth, and a dispersive homodyne response with one steep edge per $^{14}$N hyperfine line. The master-equation solutions agree with the closed-form homodyne steady state ($R^2 > 0.9999$) and with an approximate analytic ODMR theory (peak positions within 0.012 MHz). For a critically coupled readout with room-temperature electronics, combining the three edges gives a projected sensitivity of 93 pT/$\sqrt{\rm Hz}$, a $\sqrt{3}$-fold gain over the best single edge. Mapping the sensitivity against the NV-magnon coupling reveals an optimum near $g_{\rm ens}/2π\approx 0.2$-$0.4$ MHz, where it reaches 72 pT/$\sqrt{\rm Hz}$ for a 0.64 MHz spin linewidth and 19 pT/$\sqrt{\rm Hz}$ for 0.17 MHz, with thermal limits of 6.6 and 1.7 pT/$\sqrt{\rm Hz}$. The antenna-mode coupling, the NV-magnon coupling and the spin linewidth are therefore the main design levers.

cond-mat.mes-hall↗

arXiv2026

Design and Finite-Element Analysis of a New Inclined Blade-Electrode Architecture for Trapped-Ion Quantum Information Processing

The development of scalable quantum technologies requires ion-trap architectures that provide strong and stable confinement while minimizing motional heating caused by electric-field noise. Trapped-ion systems offer long coherence times and high-fidelity quantum control; however, anomalous motional heating from electrode surfaces can limit their performance. This study presents a finite-element analysis of a novel inclined ion-trap architecture, focusing on the effects of electrode geometry and blade separation on confinement strength, secular frequencies, motional heating, thermal response, and RF stability. Five trap inclinations were investigated using three-dimensional electrostatic simulations for blade separations of 5 to 35 um. The RF electric-field distribution was used to determine the effective pseudopotential, trap depth, secular frequencies, and normal modes. An empirical electric-field-noise model was then used to estimate the motional heating rate for frequency-noise exponents alpha = 3, 3.5, and 4. The results reveal a trade-off between confinement strength and ion-electrode distance. Blade separations of approximately 25 to 35 um provide a favorable design regime. At 25 um, the predicted heating rate is approximately 127 to 135 quanta per second for alpha = 3, but the RF stability margin is lower (qmax approximately 1.9). At 35 um, the stability is substantially improved (qmax approximately 0.52), while the heating rate increases to approximately 1570 to 1820 quanta per second. These results provide design guidelines for optimizing inclined ion traps for future trapped-ion quantum-information architectures.

quant-ph↗

arXiv2026

Spin torque driven mode hybridization and band engineering in nanopatterned magnonic crystals

Spin wave propagation and dynamic control are essential for reconfigurable magnonic and spintronic devices. Here, tunable mode coupling and band hybridisation are demonstrated in a nanopatterned bicomponent magnonic crystal consisting of a Permalloy/heavy metal bilayer patterned with a two dimensional array of Co nanodots. Using the plane wave method and the linearised Landau Lifshitz equation with a field like torque term, we show that inhomogeneous current induced spin torque produces periodic modulation of the magnonic frequency, enabling dynamic control of spin-wave dispersion. A pronounced avoided crossing between localised and propagating Damon Eshbach modes is observed, leading to tunable hybridisation gaps, band deformation, and enhanced mode mixing. The spin torque induced modulation enables controlled mode conversion and reconfigurable hybrid magnonic states, demonstrating efficient electrical tuning of nanoscale spin-wave dynamics.

cond-mat.mes-hall↗

arXiv2026

RoboKA: KAN Informed Multimodal Learning for RoboCall Surveillance System

Wide exploration on robocall surveillance research is hindered due to limited access to public datasets, due to privacy concerns. In this work, we first curate Robo-SAr, a synthetic robocall dataset designed for robocall surveillance research. Robo-SAr comprises of ~200 unwanted and ~1200 legitimate synthetic robocall samples across three realistic adversarial axes: psycholinguistics-manipulated transcripts, emotion-eliciting speech, and cloned voices. We further propose RoboKA, a Kolmogorov-Arnold Network (KAN)-based multimodal fusion framework designed to model structured nonlinear interactions between acoustic and linguistic cues that characterize diverse adversarial robocall strategies. RoboKA first leverages cross-modal contrastive learning to align latent modality representations and feeds the resulting embeddings to a KAN-projection head for final classification. We benchmark RoboKA against strong unimodal and multimodal baselines in both in-domain and out-of-domain setups, finding RoboKA to surpass all baselines in terms of recall and F1-score.

cs.MM↗

arXiv2026

Field Free Novel Architecture for Spintronic Flash Analog to Digital Converter

A 3 bit Analog to Digital Converter (ADC) is designed using perpendicular Spin Orbit Torque Magnetic Tunnel Junction (SOT MTJ). A sampled analog input signal is transmitted as a spin orbit torque current (Iin) to a perpendicular SOT MTJ, and deterministic switching is supported by the Voltage Controlled Magnetic Anisotropy (VCMA) and Spin Transfer Torque (STT) switching methods. Analog to digital conversion is done by comparing input signal with varied critical current of SOT MTJs. The critical current of each is SOT MTJ governed by varying widths of Heavy Metal (HM). In the 3 bit ADC, there are two sets of 7 SOT MTJs for quantizing input value, a conversion set and dummy set for comparing the change in resistance state. As input signal passed through conversion set SOT MTJs switches from Parallel (P) to AntiParallel (AP) state if the input signal exceeds its critical current. The conversion set change in state is converted to thermometer codes by StrongARM latch comparator by comparing the resistance with dummy set SOT MTJs, where all the in P state or low resistance. A novel architecture is proposed for increasing speed of throughput, by utilizing the dummy set of as a conversion set and conversion set as dummy set, thus eliminating the reset step from analog to digital conversion. And by improving SOT-MTJ and timing blocks a field free spin flash ADC has a power consumption of 476 uW with a conversion rate of 304.1 MHz is produced.

eess.SY↗

arXiv2025

Almost Tight Additive Guarantees for $k$-Edge-Connectivity

We consider the \emph{$k$-edge connected spanning subgraph} (kECSS) problem, where we are given an undirected graph $G = (V, E)$ with nonnegative edge costs $\{c_e\}_{e\in E}$, and we seek a minimum-cost \emph{$k$-edge connected} subgraph $H$ of $G$. For even $k$, we present a polytime algorithm that computes a $(k-2)$-edge connected subgraph of cost at most the optimal value $LP^*$ of the natural LP-relaxation for kECSS; for odd $k$, we obtain a $(k-3)$-edge connected subgraph of cost at most $LP^*$. Since kECSS is APX-hard for all $k\geq 2$, our results are nearly optimal. They also significantly improve upon the recent work of Hershkowitz et al., both in terms of solution quality and the simplicity of algorithm and its analysis. Our techniques also yield an alternate guarantee, where we obtain a $(k-1)$-edge connected subgraph of cost at most $1.5\cdot LP^*$; with unit edge costs, the cost guarantee improves to $(1+\frac{4}{3k})\cdot LP^*$, which improves upon the state-of-the-art approximation for unit edge costs, but with a unit loss in edge connectivity. Our kECSS-result also yields results for the \emph{$k$-edge connected spanning multigraph} (kECSM) problem, where multiple copies of an edge can be selected: we obtain a $(1+2/k)$-approximation algorithm for even $k$, and a $(1+3/k)$-approximation algorithm for odd $k$. Our techniques extend to the degree-bounded versions of kECSS and kECSM, wherein we also impose degree lower- and upper- bounds on the nodes. We obtain the same cost and connectivity guarantees for these degree-bounded versions with an additive violation of (roughly) $2$ for the degree bounds. These are the first results for degree-bounded \{kECSS,kECSM\} of the form where the cost of the solution obtained is at most the optimum, and the connectivity constraints are violated by an additive constant.

cs.DS↗

arXiv2025

Pricing AI Model Accuracy

This paper examines the market for AI models in which firms compete to provide accurate model predictions and consumers exhibit heterogeneous preferences for model accuracy. We develop a consumer-firm duopoly model to analyze how competition affects firms' incentives to improve model accuracy. Each firm aims to minimize its model's error, but this choice can often be suboptimal. Counterintuitively, we find that in a competitive market, firms that improve overall accuracy do not necessarily improve their profits. Rather, each firm's optimal decision is to invest further on the error dimension where it has a competitive advantage. By decomposing model errors into false positive and false negative rates, firms can reduce errors in each dimension through investments. Firms are strictly better off investing on their superior dimension and strictly worse off with investments on their inferior dimension. Profitable investments adversely affect consumers but increase overall welfare.

econ.TH↗

arXiv2025

Endogenous Network Structures with Precision and Dimension Choices

This paper presents a social learning model where the network structure is endogenously determined by signal precision and dimension choices. Agents not only choose the precision of their signals and what dimension of the state to learn about, but these decisions directly determine the underlying network structure on which social learning occurs. We show that under a fixed network structure, the optimal precision choice is sublinear in the agent's stationary influence in the network, and this individually optimal choice is worse than the socially optimal choice by a factor of $n^{1/3}$. Under a dynamic network structure, we specify the network by defining a kernel distance between agents, which then determines how much weight agents place on one another. Agents choose dimensions to learn about such that their choice minimizes the squared sum of influences of all agents: a network with equally distributed influence across agents is ideal.

econ.TH↗

arXiv2025

Ultra High Sensitivity Soil Moisture Detection Using Photonic Crystal Cavity with SIW Technology

Soil nutrients and water content are two crucial factors that significantly affect agricultural production yields. Hence, monitoring and measuring the water content and soil type are critical requirements. This study proposes a two-dimensional structure of photonic crystals centered around a symmetrical cross-shaped slot. The cross-slots act as resonators, and the photonic crystals surrounding the slots tune the resonance frequency of the resonators to enhance mode confinement within the resonator. The various resonant modes are located in the 2.1 GHz, 5.2 GHz, and 8.1 GHz bands, which correspond to the S band, C band, and X band, respectively. These bands are used to compare the absorption, whereas the upper resonant mode is of the order of 20 GHz. Band structure analysis was performed using the Plane Wave Method (PWM). The resonant frequency is computed using a 3D electromagnetic (EM) simulation software that utilizes the Finite Element Method (FEM) and lies in the radiation mode region of the band structure of the photonic crystal. Varying the incident angle had a negligible effect on the absorption characteristics of the sensor, allowing it to produce accurate sensing results regardless of the incident angle. The sensor's sensitivity is maximized using this design, which results in a sensitivity of 85.4 % in the 2.1 GHz resonant frequency, which is much higher than that of a single column of photonic crystal-based SIW, resulting in 50.6 % of sensitivity at 2.1 GHz, at which there is a frequency shift of the order of GHz. In contrast, in the proposed design, the frequency shift is on the order of MHz, resulting in ultra-high sensitivity.

physics.optics↗

arXiv2025

Optimal Padded Decomposition For Bounded Treewidth Graphs

A $(β,δ,Δ)$-padded decomposition of an edge-weighted graph $G = (V,E,w)$ is a stochastic decomposition into clusters of diameter at most $Δ$ such that for every vertex $v\in V$, the probability that $\rm{ball}_G(v,γΔ)$ is entirely contained in the cluster containing $v$ is at least $e^{-βγ}$ for every $γ\in [0,δ]$. Padded decompositions have been studied for decades and have found numerous applications, including metric embedding, multicommodity flow-cut gap, multicut, and zero extension problems, to name a few. In these applications, parameter $β$, called the padding parameter, is the most important parameter since it decides either the distortion or the approximation ratios. For general graphs with $n$ vertices, $β= Θ(\log n)$. Klein, Plotkin, and Rao showed that $K_r$-minor-free graphs have padding parameter $β= O(r^3)$, which is a significant improvement over general graphs when $r$ is a constant. A long-standing conjecture is to construct a padded decomposition for $K_r$-minor-free graphs with padding parameter $β= O(\log r)$. Despite decades of research, the best-known result is $β= O(r)$, even for graphs with treewidth at most $r$. In this work, we make significant progress toward the aforementioned conjecture by showing that graphs with treewidth $\rm{tw}$ admit a padded decomposition with padding parameter $O(\log \rm{tw})$, which is tight. As corollaries, we obtain an exponential improvement in dependency on treewidth in a host of algorithmic applications: $O(\sqrt{ \log n \cdot \log(\rm{tw})})$ flow-cut gap, max flow-min multicut ratio of $O(\log(\rm{tw}))$, an $O(\log(\rm{tw}))$ approximation for the 0-extension problem, an $\ell^{O(\log n)}_\infty$ embedding with distortion $O(\log \rm{tw})$, and an $O(\log \rm{tw})$ bound for integrality gap for the uniform sparsest cut.

cs.DS↗

arXiv2025

Improved Lower Bounds on Multiflow-Multicut Gaps

Given a set of source-sink pairs, the maximum multiflow problem asks for the maximum total amount of flow that can be feasibly routed between them. The minimum multicut, a dual problem to multiflow, seeks the minimum-cost set of edges whose removal disconnects all the source-sink pairs. It is easy to see that the value of the minimum multicut is at least that of the maximum multiflow, and their ratio is called the multiflow-multicut gap. The classical max-flow min-cut theorem states that when there is only one source-sink pair, the gap is exactly one. However, in general, it is well known that this gap can be arbitrarily large. In this paper, we study this gap for classes of planar graphs and establish improved lower bound results. In particular, we show that this gap is at least $\frac{16}{7}$ for the class of planar graphs, improving upon the decades-old lower bound of 2. More importantly, we develop new techniques for proving such a lower bound, which may be useful in other settings as well.

cs.DM↗

arXiv2025

Tight Guarantees for Cut-Relative Survivable Network Design via a Decomposition Technique

In the classical \emph{survivable-network-design problem} (SNDP), we are given an undirected graph $G = (V, E)$, non-negative edge costs, and some $(s_i,t_i,r_i)$ tuples, where $s_i,t_i\in V$ and $r_i\in\mathbb{Z}_+$. We seek a minimum-cost subset $H \subseteq E$ such that each $s_i$-$t_i$ pair remains connected even if any $r_i-1$ edges fail. It is well-known that SNDP can be equivalently modeled using a weakly-supermodular \emph{cut-requirement function} $f$, where we seek a minimum-cost edge-set containing at least $f(S)$ edges across every cut $S \subseteq V$. Recently, Dinitz et al. proposed a variant of SNDP that enforces a \emph{relative} level of fault tolerance with respect to $G$, where the goal is to find a solution $H$ that is at least as fault-tolerant as $G$ itself. They formalize this in terms of paths and fault-sets, which gives rise to \emph{path-relative SNDP}. Along these lines, we introduce a new model of relative network design, called \emph{cut-relative SNDP} (CR-SNDP), where the goal is to select a minimum-cost subset of edges that satisfies the given (weakly-supermodular) cut-requirement function to the maximum extent possible, i.e., by picking $\min\{f(S),|δ_G(S)|\}$ edges across every cut $S\subseteq V$. Unlike SNDP, the cut-relative and path-relative versions of SNDP are not equivalent. The resulting cut-requirement function for CR-SNDP (as also path-relative SNDP) is not weakly supermodular, and extreme-point solutions to the natural LP-relaxation need not correspond to a laminar family of tight cut constraints. Consequently, standard techniques cannot be used directly to design approximation algorithms for this problem. We develop a \emph{novel decomposition technique} to circumvent this difficulty and use it to give a \emph{tight $2$-approximation algorithm for CR-SNDP}. We also show new hardness results for these relative-SNDP problems.

cs.DS↗

arXiv2025

Dual Thinking and Logical Processing -- Are Multi-modal Large Language Models Closing the Gap with Human Vision ?

The dual thinking framework considers fast, intuitive, and slower logical processing. The perception of dual thinking in vision requires images where inferences from intuitive and logical processing differ, and the latter is under-explored in current studies. We introduce a novel adversarial dataset to provide evidence for the dual thinking framework in human vision, which also facilitates the study of the qualitative behavior of deep learning models. Our psychophysical studies show the presence of multiple inferences in rapid succession, and analysis of errors shows that the early stopping of visual processing can result in missing relevant information. MLLMs (Multi-modal Large Language Models) and VLMs (Vision Language Models) have made significant progress in correcting errors in intuitive processing in human vision and showed enhanced performance on images requiring logical processing. However, their improvements in logical processing have not kept pace with their advancements in intuitive processing. In contrast, segmentation models exhibit errors similar to those seen in intuitive human processing and lack understanding of sub-structures, as indicated by errors related to sub-components in identified instances. As AI (Artificial Intelligence)-based systems find increasing applications in safety-critical domains like autonomous driving, the integration of logical processing capabilities becomes essential. This not only enhances performance but also addresses the limitations of scaling-based approaches while ensuring robustness and reliability in real-world environments.

cs.CV↗

arXiv2025

Unsplittable Multicommodity Flows in Outerplanar Graphs

We consider the problem of multicommodity flows in outerplanar graphs. Okamura and Seymour showed that the cut-condition is sufficient for routing demands in outerplanar graphs. We consider the unsplittable version of the problem and prove that if the cut-condition is satisfied, then we can route each demand along a single path by exceeding the capacity of an edge by no more than $\frac{18}{5} \cdot d_{max}$, where $d_{max}$ is the value of the maximum demand.

cs.DS↗

arXiv2025

Quasi Crystal based Circular Patch Antenna with Artificial Magnetic Conductor for Breast Cancer Detection

Design and simulation of Quasi Crystal based Artificial Magnetic Conductor (AMC) Circular Microstrip Patch Antenna for tumor detection is discussed. Initially, a Circular Microstrip patch antenna is designed with a resonant frequency of $2.45 \, \text{GHz}$. The performance of the designed antenna can be improved by incorporating AMC in order to avoid surface waves. In this paper, we propose a novel technique for detecting malignant tissues in a more focusing manner using a Penrose patterned Quasi crystal. Quasi crystals act as a focusing device as it can transmit electromagnetic waves in a narrow direction. The tumor of size $3 \, \text{mm}$ is placed at a particular location specifically at $(0,0,10)$ in the breast phantom model. Our aim is the proposed model could identify the exact tumor location or the nearest co-ordinates of the actual location. Scattering parameters $S_{11}$ and $S_{22}$ obtained at $-10.30 \, \text{dB}$ and $-9.15 \, \text{dB}$ respectively at the tumor location $(0,-4,30)$ without the presence of Quasi crystal. Results were compared in each stage with and without Penrose Quasi crystal based patch antenna. The Quasi crystal based model was simulated and the results $S_{11}$ and $S_{22}$ parameters got improved at $-10.02 \, \text{dB}$ and $-9.37 \, \text{dB}$ respectively at the tumor location $(-1, -1, 13)$. The total specific absorption rate (SAR) of the proposed model is $0.139 \, \text{W/kg}$. Hence the proposed model is highly bio-compatible and safely applicable for human body.

physics.ins-det↗

arXiv2025

An Approximate Generalization of the Okamura-Seymour Theorem

We consider the problem of multicommodity flows in planar graphs. Okamura and Seymour showed that if all the demands are incident on one face, then the cut-condition is sufficient for routing demands. We consider the following generalization of this setting and prove an approximate max flow-min cut theorem: for every demand edge, there exists a face containing both its end points. We show that the cut-condition is sufficient for routing $Ω(1)$-fraction of all the demands. To prove this, we give a $L_1$-embedding of the planar metric which approximately preserves distance between all pair of points on the same face.

cs.DM↗

arXiv2024

Dynamics of jet breakup and the resultant drop size distribution: effect of nozzle size and impingement velocity

We conduct systematic experiments to investigate the dynamics of liquid jet breakup and the resulting droplet size distribution, emphasizing the influence of liquid jet velocity and needle exit diameter. We precisely control jet formation using a pressurized water tank equipped with needles of different sizes. Our study quantifies breakup dynamics through dimensionless parameters such as the liquid Weber number and the needle exit area ratio. Our key findings identify three distinct breakup regimes, such as dripping, Rayleigh, and wind-induced, each dictated by the interplay of surface tension and aerodynamic forces for various combinations of liquid jet velocity and needle exit diameter. We construct a regime map to delineate different breakup behaviours in the We - Ar space. It is observed that lower jet velocities produce narrow probability density functions for jet breakup length due to stable jets, whereas higher velocities result in broader distributions. Increasing jet velocity extends breakup lengths for moderate flow rates due to enhanced stability in the Rayleigh regime, but higher velocities induce instability, leading to shorter breakup lengths. Additionally, we analyze the effects of the needle exit area ratio and liquid Weber number on droplet size distribution, highlighting the transition from mono-modal to bi-modal distribution under varying conditions.

physics.flu-dyn↗