arXiv subjects

Nathan Scott

Publications and source records attributed to Nathan Scott.

3 recordsLinked to original sources

arXiv2026

Calibration of MEMS DM actuator gains using a Zernike wavefront sensor on the HiCAT testbed and implications for Habitable Worlds Observatory operations

Deformable mirrors (DMs) are a key component of coronagraph instruments performing adaptive optics on the ground, and for future space observatories such as HWO and Roman CGI. Here, they will be used as part of the wavefront sensing and control system to "dig a dark zone'' - remove residual stellar light to create a high-contrast region in the focal plane where faint companions can be detected. To reach the deep contrasts needed to directly image cool or reflected light planets (<1e-8) accurate calibration of the DM actuator gain is essential as picometer differences between the expected and realized DM surface can significantly degrade dark zone (DZ) digging efficiency. This increases the overheads needed to achieve a DZ and critically places more stringent requirements on observatory stability. Furthermore, DM gain varies with actuator stroke, necessitating rapid, in situ gain map recalculations to maintain DZ digging efficiency over time. Zernike wavefront sensors (ZWFS) are well-suited for this task as they efficiently provide picometer-level sensitivity and will likely already be included on board as part of a low order wavefront sensor for HWO. Here we present results from the HiCAT testbed at STScI where we calibrated gain maps for our Boston Micromachines 952-actuator micro electromechanical (MEMS) DMs using both a Fizeau interferometer and a ZWFS to compare performance. With the ZWFS we compute a gain map using both local linear fits around a given DM solution, and present a formalism for deriving more complex quadratic solutions which are more computationally intensive, but accurate over most of the dynamic range of each actuator. We then use these techniques to calibrate the DMs on the HiCAT testbed and show increased DZ digging efficiency with the new gain map and better contrast performance moving from 14 to 16 bit control electronics as enabled by these calibrations.

astro-ph.IM↗

arXiv2024

High-contrast imager for complex aperture telescopes (HiCAT): 8. Dark zone demonstration with simultaneous closed-loop low-order wavefront sensing and control

We present recent laboratory results demonstrating high-contrast coronagraphy for the future space-based large IR/Optical/Ultraviolet telescope recommended by the Decadal Survey. The High-contrast Imager for Complex Aperture Telescopes (HiCAT) testbed aims to implement a system-level hardware demonstration for segmented aperture coronagraphs with wavefront control. The telescope hardware simulator employs a segmented deformable mirror with 37 hexagonal segments that can be controlled in piston, tip, and tilt. In addition, two continuous deformable mirrors are used for high-order wavefront sensing and control. The low-order sensing subsystem includes a dedicated tip-tilt stage, a coronagraphic target acquisition camera, and a Zernike wavefront sensor that is used to measure and correct low-order aberration drifts. We explore the performance of a segmented aperture coronagraph both in static operations (limited by natural drifts and instabilities) and in dynamic operations (in the presence of artificial wavefront drifts added to the deformable mirrors), and discuss the estimation and control strategies used to reach and maintain the dark-zone contrast using our low-order wavefront sensing and control. We summarize experimental results that quantify the performance of the testbed in terms of contrast, inner/outer working angle and bandpass, and analyze limiting factors.

astro-ph.IM↗

arXiv2023

Multi-Contact Force-Sensing Guitar for Training and Therapy

Hand injuries from repetitive high-strain and physical overload can hamper or even end a musician's career. To help musicians develop safer playing habits, we developed a multiplecontact force-sensing array that can substitute as a guitar fretboard. The system consists of 72 individual force sensing modules, each containing a flexure and a photointerrupter that measures the corresponding deflection when forces are applied. The system is capable of measuring forces between 0-25 N applied anywhere within the first 12 frets at a rate of 20 Hz with an average accuracy of 0.4 N and a resolution of 0.1 N. Accompanied with a GUI, the resulting prototype was received positively as a useful tool for learning and injury prevention by novice and expert musicians.

eess.SP↗