arXiv subjects

Nathan Johnson

Publications and source records attributed to Nathan Johnson.

12 recordsLinked to original sources

arXiv2026

Hamiltonian Learning at Scale

Learning a quantum system's Hamiltonian is crucial for understanding and controlling its dynamics and has recently become a topic of widespread interest. To understand the learning protocol's error tolerances, i.e. its stability in the presence of inevitable errors, this work utilizes tensor network techniques to emulate Hamiltonian learning workflows at scale and with noise. Specifically, we employed a Hamiltonian learning technique based on approximate stationary states which are constructed using matrix product tools. We provide analytic bounds on the Hamiltonian learning estimation errors and perform numerical simulations that highlight learning error's stability under two families of errors. Using our workflow, we are able to scale up the protocol and learn mixed-field Ising model Hamiltonians of an $N=300$ site spin chain. By simulating the protocol at large scale, and empirically studying its practical limitations, our analysis of how errors affect the Hamiltonian learning process provides valuable lessons for future experiments. We conclude by discussing the avenues our work opens as well as future work that can support Hamiltonian learning experiments.

quant-ph↗

arXiv2026

A current source with metrological precision made on a 300mm silicon MOS process

Although the measurement of current is now defined with respect to the electronic charge, producing a current standard based on a single-electron source remains challenging. The error rate of a source must be below 0.01 ppm, and many such sources must be operated in parallel to provide practically useful values of current in the nanoampere range. Achieving a single electron source using an industrial grade 300 mm wafer silicon metal oxide semiconductor (MOS) process could offer a powerful route for scaling, combined with the ability for integration with control and measurement electronics. Here, we present measurements of such a single-electron source indicating an error rate of 0.008 ppm, below the error threshold to satisfy the SI Ampere, and one of the lowest error rates reported, implemented using a gate-defined quantum dot device fabricated on an industry-grade silicon MOS process. Further evidence supporting the accuracy of the device is obtained by comparing the device performance to established models of quantum tunnelling, which reveal the mechanism of operation of our source at the single particle level. The low error rate observed in this device motivates the development of scaled arrays of parallel sources utilising Si MOS devices to realise a new generation of metrologically accurate current standards.

cond-mat.mes-hall↗

arXiv2024

High frequency breakdown in quantum dots

Dynamic quantum dots are known to generate very accurate currents and can be used as a source of single electron wavepackets for use in quantum metrology, sensing or information processing. To realise their full technological potential, it is desirable to maximise the frequency of operation to increase the current. However, it has been observed that the mechanism of electron transfer across the quantum dot consistently breaks down for GHz frequencies, and this remains unexplained. Here, we present a novel analysis technique, combined with detailed modelling, to present a mechanism of high frequency breakdown in quantum dots as a rapidly-imparted momentum impulse. Such understanding aids future design and operation protocols, allowing their use in high frequency and real time quantum measurements and technologies.

cond-mat.mes-hall↗

arXiv2024

Radiofrequency cascade readout of coupled spin qubits

Silicon spin qubits based on metal-oxide-semiconductor (MOS) technology are compatible with semiconductor manufacturing and offer a route to scalable quantum processing. However, spin readout typically relies on proximal charge sensors, which add architectural complexity and limit qubit connectivity. In situ dispersive readout techniques are more compact, which can alleviate these constraints, but exhibit limited sensitivity. Here we report a radiofrequency electron-cascade readout method that enhances the dispersive signal through alternating-current electron co-tunnelling. With this approach, we achieve an enhancement in signal-to-noise ratio of more than $35~$dB, leading to a minimum integration time of $7.6 \pm 0.2~\mu$s. We demonstrate singlet-triplet readout of two-electron spins in a natural silicon planar MOS quantum dot array, and coherent spin control using the exchange interaction, which forms the basis for entangling gates. We find dephasing times of up to $500~$ns and a gate quality factor that exceeds 10.

cond-mat.mes-hall↗

arXiv2024

Active Learning for Rapid Targeted Synthesis of Compositionally Complex Alloys

The next generation of advanced materials is tending toward increasingly complex compositions. Synthesizing precise composition is time-consuming and becomes exponentially demanding with increasing compositional complexity. An experienced human operator does significantly better than a beginner but still struggles to consistently achieve precision when synthesis parameters are coupled. The time to optimize synthesis becomes a barrier to exploring scientifically and technologically exciting compositionally complex materials. This investigation demonstrates an Active Learning (AL) approach for optimizing physical vapor deposition synthesis of thin-film alloys with up to five principal elements. We compared AL based on Gaussian Process (GP) and Random Forest (RF) models. The best performing models were able to discover synthesis parameters for a target quinary alloy in 14 iterations. We also demonstrate the capability of these models to be used in transfer learning tasks. RF and GP models trained on lower dimensional systems (i.e. ternary, quarternary) show an immediate improvement in prediction accuracy compared to models trained only on quinary samples. Furthermore, samples that only share a few elements in common with the target composition can be used for model pre-training. We believe that such AL approaches can be widely adapted to significantly accelerate the exploration of compositionally complex materials.

cond-mat.mtrl-sci↗

arXiv2023

Coulomb collisions of hot and cold single electrons in series-coupled silicon single-electron pumps

Control of the Coulomb interaction between single electrons is vital for realizing quantum information processing using flying electrons and, particularly, for the realization of deterministic two-qubit operations. Since the strength of the Coulomb interaction increases with decreasing distance, a collision experiment of single electrons would be an ideal way to investigate it. Moreover, it would be useful to study such a Coulomb collision in silicon system, which has been extensively studied for qubit applications but so far has not been used for making Coulomb collisions at the single-electron level. Here, we made two series-coupled tunable-barrier single-electron pumps in silicon and used one to inject a hot single electron into the other pump in each pumping cycle. The hot single electron collides with a cold single electron confined in the other single-electron pump. We observed a current flow due to ejection not only of the hot single electron but also of the confined cold single electron. The latter leads to an excess current at a current plateau at a certain voltage range. We also found that increasing the number of cold electrons from one to two increased the cold-electron current by at least twofold. These results can be explained by a charging effect due to the Coulomb interaction. This observation is an important step toward quantum manipulation of flying single electrons in silicon.

cond-mat.mes-hall↗

arXiv2022

Muscle Vision: Real Time Keypoint Based Pose Classification of Physical Exercises

Recent advances in machine learning technology have enabled highly portable and performant models for many common tasks, especially in image recognition. One emerging field, 3D human pose recognition extrapolated from video, has now advanced to the point of enabling real-time software applications with robust enough output to support downstream machine learning tasks. In this work we propose a new machine learning pipeline and web interface that performs human pose recognition on a live video feed to detect when common exercises are performed and classify them accordingly. We present a model interface capable of webcam input with live display of classification results. Our main contributions include a keypoint and time series based lightweight approach for classifying a selected set of fitness exercises and a web-based software application for obtaining and visualizing the results in real time.

cs.AI↗

arXiv2022

Adaptive Control of Distributed Energy Resources for Distribution Grid Voltage Stability

Volt-VAR and Volt-Watt functionality in photovoltaic (PV) smart inverters provide mechanisms to ensure system voltage magnitudes and power factors remain within acceptable limits. However, these control functions can become unstable, introducing oscillations in system voltages when not appropriately configured or maliciously altered during a cyberattack. In the event that Volt-VAR and Volt-Watt control functions in a portion of PV smart inverters in a distribution grid are unstable, the proposed adaptation scheme utilizes the remaining and stably-behaving PV smart inverters and other Distributed Energy Resources to mitigate the effect of the instability. The adaptation mechanism is entirely decentralized, model-free, communication-free, and requires virtually no external configuration. We provide a derivation of the adaptive control approach and validate the algorithm in experiments on the IEEE 37 and 8500 node test feeders.

eess.SY↗

arXiv2020

Deep Reinforcement Learning for DER Cyber-Attack Mitigation

The increasing penetration of DER with smart-inverter functionality is set to transform the electrical distribution network from a passive system, with fixed injection/consumption, to an active network with hundreds of distributed controllers dynamically modulating their operating setpoints as a function of system conditions. This transition is being achieved through standardization of functionality through grid codes and/or international standards. DER, however, are unique in that they are typically neither owned nor operated by distribution utilities and, therefore, represent a new emerging attack vector for cyber-physical attacks. Within this work we consider deep reinforcement learning as a tool to learn the optimal parameters for the control logic of a set of uncompromised DER units to actively mitigate the effects of a cyber-attack on a subset of network DER.

eess.SY↗

arXiv2019

Derivation of potential profile of a dynamic quantum dot

We report a method to derive the potential barrier profile shape in a dynamic quantum dot and show the loading statistics, and hence accuracy of electron transfer, depend significantly on the shape of the barrier. This method takes a further step towards tunable barrier shapes, which would greatly increase the accuracy of single electron sources, allowing the single electron current to be useful for quantum sensing, quantum information and metrology. We apply our method to the case of a tunable-barrier single-electron pump, an exemplary device that shows promise as a source of hot single electron wavepackets.

cond-mat.mes-hall↗

arXiv2019

Picosecond coherent electron motion in a silicon single-electron source

Understanding ultrafast coherent electron dynamics is necessary for application of a single-electron source to metrological standards, quantum information processing, including electron quantum optics, and quantum sensing. While the dynamics of an electron emitted from the source has been extensively studied, there is as yet no study of the dynamics inside the source. This is because the speed of the internal dynamics is typically higher than 100 GHz, beyond state-of-the-art experimental bandwidth. Here, we theoretically and experimentally demonstrate that the internal dynamics in a silicon singleelectron source comprising a dynamic quantum dot can be detected, utilising a resonant level with which the dynamics is read out as gate-dependent current oscillations. Our experimental observation and simulation with realistic parameters show that an electron wave packet spatially oscillates quantum-coherently at $\sim$ 200 GHz inside the source. Our results will lead to a protocol for detecting such fast dynamics in a cavity and offer a means of engineering electron wave packets. This could allow high-accuracy current sources, high-resolution and high-speed electromagnetic-field sensing, and high-fidelity initialisation of flying qubits.

cond-mat.mes-hall↗

arXiv2018

Energy relaxation in hot electron quantum optics via acoustic and optical phonon emission

We study theoretically the relaxation of hot quantum-Hall edge-channel electrons under the emission of both acoustic and optical phonons. Aiming to model recent experiments with single-electron sources, we describe simulations that provide the distribution of electron energies and arrival times at a detector a fixed distance from the source. From these simulations we extract an effective rate of emission of optical phonons that contains contributions from both a direct emission process as well as one involving inter-edge-channel transitions that are driven by the sequential emission of first an acoustic -- and then an optical -- phonon. Furthermore, we consider the mean energy loss due to acoustic phonon emission and resultant broadening of the electron energy distribution and derive an effective drift-diffusion model for this process.

cond-mat.mes-hall↗