arXiv subjects

Muyuan Ma

Publications and source records attributed to Muyuan Ma.

10 recordsLinked to original sources

arXiv2026

GeoTrussRover: Morphological Computation with Contact-Semantic Control Primitives

Reconfigurable robots can change their contact geometry when a fixed body cannot negotiate an obstacle. A variable-geometry truss (VGT) distributes this shape change through a load-bearing structure, but coupling it to a mobile base creates a high-dimensional coordination problem. GeoTrussRover combines an electrically actuated VGT, a wheeled base, and contact-semantic morphology planning and control. We solve one source traversal and extract four contact-semantic primitives that describe coordination among 21 members. Physics-constrained projection adapts them to unseen step heights with the same contact topology. When every phase remains feasible, adaptation does not recompute the complete motion. If one phase violates the new physical constraints, only that phase is recomputed. A full-space QP then tracks the adapted motion and corrects member and wheel errors. For transfer from 0.10m to 0.075m, the method reduces objective-function evaluations by 63.7% relative to full recomputation. Contact-phase feasibility analysis covers step heights from 0.10 to 0.46m, or 1.08 to 4.97 wheel radii, with the upper value near the theoretical feasible boundary. The electric prototype traverses 2.11 wheel radii. The resulting low-dimensional representation stores task coordination in a hyper-redundant, load-bearing morphology and reuses it during locomotion.

cs.RO↗

arXiv2026

MuJoCable: Reduced-Order Surface-Routed Cable Transmission for Tendon-Driven Robots

Tendon transmissions reduce distal inertia and add compliance, yet routing, slack, and friction govern motion and force transfer. Mainstream rigid-body robotics simulators such as MuJoCo do not jointly resolve moving noncircular contact, unilateral tension, and segment friction. We present MuJoCable, which adds a reduced-order, configuration-dependent cable transmission to MuJoCo. Its routing algorithm jointly optimizes an ordered path across moving analytic and mesh surfaces. A unilateral axial law, directional Capstan propagation, and nodal virtual work map this path to segment tensions and body forces. The warm-started engine plugin applies these forces during simulation and exposes route and load states for design. Pulley benchmarks recover analytical transmission relations with a Capstan-ratio error below 0.5%. On the underactuated 18-joint SpiRobs, MuJoCable reveals friction-driven load growth and proximal redistribution of joint rotation that the native tendon does not represent. Hardware tests on SpiRobs and a tendon-route-coupled finger reproduce observed motion sequences. By making physical threading executable, MuJoCable brings transmission sources of the simulation-to-reality gap into route, cable, and actuator design before fabrication.

cs.RO↗

arXiv2026

EAGG: Embodiment-Aligned Grasp Generation via Geometry-Aware Graph Conditioning

Cross-end-effector grasp generation seeks a unified model that generalizes across objects and across embodiments ranging from parallel grippers to dexterous end effectors. Existing grasp generators are typically designed for a fixed embodiment or encode embodiment identity with a static descriptor, which weakens transfer when topology, actuation coupling, and contact geometry differ substantially. We present EAGG, an embodiment-aligned grasp generator that represents each embodiment with a topology-aware end-effector graph and an embodiment-specific low-dimensional end-effector control space. A frozen end-effector-cognition backbone converts the current articulated state into geometry-aware tokens that act as a reusable morphology prior, and iterative geometry injection refreshes these tokens throughout sampling so that conditioning remains synchronized with the evolving end-effector geometry. On the MultiGripperGrasp benchmark, EAGG reaches 56.17% average success across six training end effectors, remaining within 1.10 percentage points of specialized training while preserving transfer to finetuning and zero-shot end effectors. Iterative geometry injection further reduces the pooled median contact distance from 0.239 cm to 0.189 cm. These results show that cross-end-effector grasp generation is strengthened by aligning embodiment structure inside a shared generator rather than suppressing embodiment differences. Code is available at https://github.com/wanhaoniu/EAGG.

cs.RO↗

arXiv2026

Ensuring Interaction Safety in Multitask Exoskeleton Control: A Simulation-Trained Variable Impedance Framework

Wearable exoskeletons can augment human phys ical capabilities during complex activities. However, ensuring adaptation across diverse tasks while guaranteeing interaction safety remains a critical challenge. To address this, a simulation trained variable impedance control approach with stability guarantees is proposed. First, a simulation-based human exoskeleton motion data generation pipeline is established, utilizing Proximal Policy Optimization (PPO) to synthesize human muscle activations while the exoskeleton provides direct compensation for human biological joint torques. Subsequently, the generated dataset is used to train a dual modality policy that fuses semantic instructions with proprioceptive history, enabling the prediction of reference trajectories and variable impedance gains for nine different motion tasks. To guarantee safety, the network outputs are constrained by a stability criterion derived from Lyapunov stability theory, which bounds stiffness variations to ensure the asymptotic stability of the coupled system. Experimental results indicate that the proposed framework reduces metabolic cost in real-world scenarios com pared with standard baseline methods. These findings suggest the feasibility of the proposed framework for safe, multitask exoskeleton control.

cs.RO↗

arXiv2026

From Reach to Insert: Tactile-Augmented Precision Assembly under Sub-Millimeter Tolerances

High-precision assembly frequently involves tight-tolerance insertions, where even slight pose errors can cause jamming or excessive interaction forces, making robust and safe insertion policies difficult to obtain. This paper proposes a tactile-augmented two-stage method that combines Imitation Learning (IL) and Reinforcement Learning (RL) for precision insertion tasks. In the first stage, IL learns a reaching policy with position generalization that grasps the peg and brings it to the vicinity of the target region. In the second stage, RL executes the insertion and enables recovery from failures during contact-rich interactions. To better exploit tactile feedback, we introduce tactile group sampling to increase coverage of critical contact segments during training, and design a tactile critic to more accurately evaluate policy values, improving insertion performance while maintaining low contact forces. We conduct systematic experiments across five hole geometries and three clearance settings. Results show that our method substantially improves insertion performance across all settings; under the most challenging 0.05\,mm clearance, it achieves a 67\% success rate while keeping contact forces low, reducing the maximum interaction force by 60\% and torque by 44\%, thereby validating both effectiveness and safety for precision assembly.

cs.RO↗

arXiv2025

Motion Adaptation Across Users and Tasks for Exoskeletons via Meta-Learning

Wearable exoskeletons can augment human strength and reduce muscle fatigue during specific tasks. However, developing personalized and task-generalizable assistance algorithms remains a critical challenge. To address this, a meta-imitation learning approach is proposed. This approach leverages a task-specific neural network to predict human elbow joint movements, enabling effective assistance while enhancing generalization to new scenarios. To accelerate data collection, full-body keypoint motions are extracted from publicly available RGB video and motion-capture datasets across multiple tasks, and subsequently retargeted in simulation. Elbow flexion trajectories generated in simulation are then used to train the task-specific neural network within the model-agnostic meta-learning (MAML) framework, which allows the network to rapidly adapt to novel tasks and unseen users with only a few gradient updates. The adapted network outputs personalized references tracked by a gravity-compensated PD controller to ensure stable assistance. Experimental results demonstrate that the exoskeleton significantly reduces both muscle activation and metabolic cost for new users performing untrained tasks, compared to performing without exoskeleton assistance. These findings suggest that the proposed framework effectively improves task generalization and user adaptability for wearable exoskeleton systems.

cs.RO↗

arXiv2024

Locate Anything on Earth: Advancing Open-Vocabulary Object Detection for Remote Sensing Community

Object detection, particularly open-vocabulary object detection, plays a crucial role in Earth sciences, such as environmental monitoring, natural disaster assessment, and land-use planning. However, existing open-vocabulary detectors, primarily trained on natural-world images, struggle to generalize to remote sensing images due to a significant data domain gap. Thus, this paper aims to advance the development of open-vocabulary object detection in remote sensing community. To achieve this, we first reformulate the task as Locate Anything on Earth (LAE) with the goal of detecting any novel concepts on Earth. We then developed the LAE-Label Engine which collects, auto-annotates, and unifies up to 10 remote sensing datasets creating the LAE-1M - the first large-scale remote sensing object detection dataset with broad category coverage. Using the LAE-1M, we further propose and train the novel LAE-DINO Model, the first open-vocabulary foundation object detector for the LAE task, featuring Dynamic Vocabulary Construction (DVC) and Visual-Guided Text Prompt Learning (VisGT) modules. DVC dynamically constructs vocabulary for each training batch, while VisGT maps visual features to semantic space, enhancing text features. We comprehensively conduct experiments on established remote sensing benchmark DIOR, DOTAv2.0, as well as our newly introduced 80-class LAE-80C benchmark. Results demonstrate the advantages of the LAE-1M dataset and the effectiveness of the LAE-DINO method.

cs.CV↗

arXiv2024

PriorCLIP: Visual Prior Guided Vision-Language Model for Remote Sensing Image-Text Retrieval

Remote sensing image-text retrieval plays a crucial role in remote sensing interpretation, yet remains challenging under both closed-domain and open-domain scenarios due to semantic noise and domain shifts. To address these issues, we propose a visual prior-guided vision-language model, PriorCLIP, which leverages visual priors for unbiased representation learning and adaptive vision-language alignment. In the closed-domain setting, PriorCLIP introduces two Progressive Attention Encoder (PAE) structures: Spatial-PAE constructs a belief matrix with instruction embeddings to filter key features and mitigate semantic bias. At the same time, Temporal-PAE exploits cyclic activation across time steps to enhance text representation. For the open-domain setting, we design a two-stage prior representation learning strategy, consisting of large-scale pre-training on coarse-grained image-text pairs, followed by fine-tuning on fine-grained pairs using vision-instruction, which enables robust retrieval across long-tail concepts and vocabulary shifts. Furthermore, a cluster-based symmetric contrastive Attribution Loss is proposed to constrain inter-class relations and alleviate semantic confusion in the shared embedding space. Extensive experiments on RSICD and RSITMD benchmarks demonstrate that PriorCLIP achieves substantial improvements, outperforming existing methods by 4.9% and 4.0% in closed-domain retrieval, and by 7.3% and 9.4% in open-domain retrieval, respectively.

cs.CV↗

arXiv2023

AI-GOMS: Large AI-Driven Global Ocean Modeling System

Ocean modeling is a powerful tool for simulating the physical, chemical, and biological processes of the ocean, which is the foundation for marine science research and operational oceanography. Modern numerical ocean modeling mainly consists of governing equations and numerical algorithms. Nonlinear instability, computational expense, low reusability efficiency and high coupling costs have gradually become the main bottlenecks for the further development of numerical ocean modeling. Recently, artificial intelligence-based modeling in scientific computing has shown revolutionary potential for digital twins and scientific simulations, but the bottlenecks of numerical ocean modeling have not been further solved. Here, we present AI-GOMS, a large AI-driven global ocean modeling system, for accurate and efficient global ocean daily prediction. AI-GOMS consists of a backbone model with the Fourier-based Masked Autoencoder structure for basic ocean variable prediction and lightweight fine-tuning models incorporating regional downscaling, wave decoding, and biochemistry coupling modules. AI-GOMS has achieved the best performance in 30 days of prediction for the global ocean basic variables with 15 depth layers at 1/4{\deg} spatial resolution. Beyond the good performance in statistical metrics, AI-GOMS realizes the simulation of mesoscale eddies in the Kuroshio region at 1/12{\deg} spatial resolution and ocean stratification in the tropical Pacific Ocean. AI-GOMS provides a new backbone-downstream paradigm for Earth system modeling, which makes the system transferable, scalable and reusable.

physics.ao-ph↗

arXiv2023

KoopmanLab: machine learning for solving complex physics equations

Numerous physics theories are rooted in partial differential equations (PDEs). However, the increasingly intricate physics equations, especially those that lack analytic solutions or closed forms, have impeded the further development of physics. Computationally solving PDEs by classic numerical approaches suffers from the trade-off between accuracy and efficiency and is not applicable to the empirical data generated by unknown latent PDEs. To overcome this challenge, we present KoopmanLab, an efficient module of the Koopman neural operator family, for learning PDEs without analytic solutions or closed forms. Our module consists of multiple variants of the Koopman neural operator (KNO), a kind of mesh-independent neural-network-based PDE solvers developed following dynamic system theory. The compact variants of KNO can accurately solve PDEs with small model sizes while the large variants of KNO are more competitive in predicting highly complicated dynamic systems govern by unknown, high-dimensional, and non-linear PDEs. All variants are validated by mesh-independent and long-term prediction experiments implemented on representative PDEs (e.g., the Navier-Stokes equation and the Bateman-Burgers equation in fluid mechanics) and ERA5 (i.e., one of the largest high-resolution global-scale climate data sets in earth physics). These demonstrations suggest the potential of KoopmanLab to be a fundamental tool in diverse physics studies related to equations or dynamic systems.

cs.LG↗