arXiv subjects

Muhammad Khalil

Publications and source records attributed to Muhammad Khalil.

6 recordsLinked to original sources

arXiv2026

Blockage-Aware and Shadowing Aware RIS Assisted Joint Communication and Positioning for Urban Non Terrestrial Networks

Reconfigurable intelligent surfaces (RISs) have recently attracted interest for non-terrestrial networks (NTNs), especially for improving satellite communication performance. However, RIS-assisted urban NTN designs that jointly support reliable communication and user positioning under blockage, while maintaining low online complexity, remain limited. This paper proposes a blockage-aware and shadowing-aware RIS-assisted framework for joint communication and positioning in an urban low-Earth-orbit (LEO) satellite downlink. A terrestrial RIS is used both to reinforce the blockage-sensitive satellite--user link and to create an additional reflected path that enhances delay-domain positioning observability. We develop a reduced two-dimensional positioning model based on the direct-path delay and the RIS-assisted excess delay, and combine the resulting position error bound (PEB) with the received signal-to-noise ratio (SNR) into a unified utility. A blockage-aware three-mode policy then adapts RIS operation among communication-oriented, balanced, and positioning-oriented modes according to the direct-link condition. To improve robustness, spatially correlated RIS--user shadowing is tracked across coherence blocks using a state-space model and a scalar Kalman filter, and the filtered estimate is used in a robust codebook-based RIS selection strategy with low online complexity. Numerical results show that the proposed framework provides a controllable SNR--PEB tradeoff, improves positioning accuracy while maintaining competitive SNR, stabilizes codeword selection under shadowing uncertainty, and increases joint success probability with RIS size and phase resolution, with diminishing returns at high hardware complexity.

eess.SP↗

arXiv2026

Stochastic Design of Active RIS-Assisted Satellite Downlinks under Interference, Folded Noise, and EIRP Constraints

Active reconfigurable intelligent surfaces (RISs) can mitigate the double-fading loss of passive reflection in satellite downlinks. However, their gains are limited by random co-channel interference, gain-dependent amplifier noise, and regulatory emission constraints. This paper develops a stochastic reliability framework for active RIS-assisted satellite downlinks by modeling the desired and interfering channels, receiver noise, and RIS amplifier noise as random variables. The resulting instantaneous signal-to-interference-plus-noise ratio (SINR) model explicitly captures folded cascaded amplifier noise and reveals a finite high-gain SINR ceiling. To guarantee a target outage level, we formulate a chance-constrained max-SINR design that jointly optimizes the binary RIS configuration and a common amplification gain. The chance constraint is handled using a sample-average approximation (SAA) with a violation budget. The resulting feasibility problem is solved as a mixed-integer second-order cone program (MISOCP) within a bisection search over the SINR threshold. Practical implementation is enforced by restricting the gain to an admissible range determined by small-signal stability and effective isotropic radiated power (EIRP) limits. We also derive realization-wise SINR envelopes based on eigenvalue and l1-norm bounds, which provide interpretable performance limits and fast diagnostics. Monte Carlo results show that these envelopes tightly bound the simulated SINR, reproduce the predicted saturation behavior, and quantify performance degradation as interference increases. Overall, the paper provides a solver-ready, reliability-targeting design methodology whose achieved reliability is validated through out-of-sample Monte Carlo testing under realistic randomness and hardware constraints.

eess.SP↗

arXiv2025

Adaptive Channel Estimation and Quantized Feedback for RIS Assisted Optical Wireless Communication Systems

This paper presents a unified modeling, estimation, and feedback framework for reconfigurable intelligent surface RIS-assisted optical wireless links. The key modeling element is a long-exposure pixel gain that extends the classical diffraction-limited response by statistically averaging angular jitter and mispointing; it admits an exact real-integral form and captures boresight attenuation and progressive sidelobe filling. The end-to-end system couples free-space path loss, Beer--Lambert atmospheric extinction, pixel-level diffraction, and optical efficiency with a unitary-pilot least-squares channel estimator and quantized phase feedback. Analysis closely matches Monte Carlo simulations and yields concrete design rules: with a surface of N=64 pixels, pilot length $M=2N$, and pilot SNR=20 dB, the normalized mean-squared error is0.005, implying an effective-SNR loss of about 0.5 and a capacity penalty of 0.007bits-s. Six-bit phase quantization introduces no measurable additional penalty at these operating points, setting a practical benchmark for feedback resolution. Training overhead scales strongly with pixel geometry: halving pixel width (quartering pixel area) increases the pilot length required to maintain the same NMSE by roughly fourfold. The framework reconciles physical-optics modeling with estimation-and-feedback design and provides a principled basis for scalable link budgeting in RIS-assisted optical networks.

eess.SP↗

arXiv2025

Performance Evaluation of High Power Microwave Systems Against UAVs A Probabilistic Antenna Propagation Framework with Sensitivity Analysis

We present an uncertainty-aware probabilistic framework for high-power microwave (HPM) counter-UAV performance under stochastic target motion, beam-pointing uncertainty, atmospheric propagation, and uncertain target susceptibility. It couples stochastic UAV kinematics, a jitter-to-gain model, free-space spreading, gaseous absorption, and rain attenuation, and a logistic energy--response model to derive closed-form statistics of received pulse energy and per-pulse and cumulative effectiveness probabilities. Slant-range variability arises from integrated acceleration noise. Received pulse energy is treated as a target-level exposure metric rather than the exact energy absorbed by an internal component. Closed-form moments and a log-normal approximation yield the mean per-pulse probability through Gaussian--Hermite quadrature and a dwell-time expression under an independent-pulse assumption. Analytical predictions closely match Monte Carlo results under matched assumptions. For a vulnerable-target threshold of $E_{\mathrm{th}}=10^{-2}\,\mathrm{J}$, the model predicts $\bar{P}_{\mathrm{kill}}\gtrsim0.4$ per pulse and $P_{\mathrm{kill,tot}}>99\%$ within about $0.1\,\mathrm{s}$ at kilohertz PRF. For a hardened target with $E_{\mathrm{th}}=10^{-1}\,\mathrm{J}$, it predicts $\bar{P}_{\mathrm{kill}}\approx2.2\times10^{-4}$ ($\approx0.02\%$) and $P_{\mathrm{kill,tot}}\approx20\%$ after $1\,\mathrm{s}$ at $1\,\mathrm{kHz}$ under the i.i.d. pulse assumption. Elasticity analysis identifies slant range as dominant ($S_{\bar{R}}\approx-2$), followed by aperture diameter and transmit power; pointing jitter and atmospheric variability are less influential in the evaluated regimes. Within its assumptions, the framework supports system sizing, trade-off analysis, and risk-aware mission planning.

eess.SP↗

arXiv2025

Enhancing Satellite Quantum Key Distribution with Dual Band Reconfigurable Intelligent Surfaces

This paper presents a novel system architecture for hybrid satellite communications, integrating quantum key distribution (QKD) and classical radio frequency (RF) data transmission using a dual-band reconfigurable intelligent surface (RIS). The motivation is to address the growing need for global, secure, and reliable communications by leveraging the security of quantum optical links and the robustness of classical RF channels within a unified framework. By employing a frequency-selective RIS, the system independently optimizes both quantum (850 nm) and classical (S-band) channels in real time, dynamically adapting to environmental fluctuations such as atmospheric turbulence and rain attenuation. The joint optimization of the quantum bit error rate (QBER) and the classical signal-to noise ratio (SNR) is formulated as a quadratic unconstrained binary optimization (QUBO) problem, enabling efficient adaptive phase control utilizing both quantum and classical computational methods. Comprehensive theoretical modeling and simulations, benchmarked against experimental data from the Micius satellite, demonstrate substantial performance gains. Notably, the RIS assisted system reduces QBER from approximately 2.5% to 0.7%, increases the secure key rate (SKR) to over 30,000 bits per second, and enhances classical RF SNR by about 3 dB at high elevation angles. These results illustrate the practical potential of hybrid RIS-assisted satellite links to deliver robust, efficient, and secure global communications.

eess.SP↗

arXiv2022

Balanced Performance Between Energy-Delay and Bit Error Rate in UAV Relay Networks

This paper presents a new strategy for simultaneously reducing energy consumption, transmission delays, and bit error rate in Unmanned Aerial Vehicle UAV networks. A UAV is fitted with a wireless Bidirectional Relay BR to enable coverage network extension and increase transmission throughput. The downside of the BR advantages is the delay in data transmission caused by the UAV movement. A consequence of this delay is increased total energy consumption, causing further degradation in bit error rate performance, especially at high SNR levels. In wireless communication, the trade-off between delay and energy consumption is, fortunately, possible to improve performance. Therefore, this study aims to enhance UAV network performance by reducing energy consumption, data transmission delay, and bit error rate. A multi-objective algorithm is employed to generate an adaptive optimal energy allocation strategy based on the balance between energy consumption and transmission delays. The results of theoretical analysis are illustrated with several examples. As herein demonstrated, the proposed solution effectively balances delay and energy efficiency in a customised system design and improves the bit error rate in UAV networks

eess.SP↗