arXiv subjects

Mohammad Shojaeifard

Publications and source records attributed to Mohammad Shojaeifard.

4 recordsLinked to original sources

arXiv2026

Deep Indentation of Soft Solids: A Limit State

Indentation is a practical technique for probing the mechanical properties of soft materials such as elastomers and gels when standard tests are difficult, destructive, or simply cannot be performed in situ. Here, deep indentation of a half space made from an isotropic, incompressible one term Ogden hyperelastic solid is analysed for an indenter in the form of a rigid circular rod of radius R and that is either flat-bottomed or has a hemispherical tip. Numerical simulations reveal that a limit state is achieved when the indent depth D much exceeds the radius R of the rod and the indentation force F scales as F = \b{eta} E D^2, where \b{eta} is a dimensionless coefficient and E is the Young s modulus of the solid. The magnitude of \b{eta} increases with the degree of strain stiffening of the hyperelastic solid but is almost insensitive to the headshape of the rod and to the level of Coulomb friction at the interface with the solid. A high level of strain stiffening of the Ogden solid at finite strain implies that the level of strain at the indenter tip is small up to a large value of D/R, thereby protecting the solid from failure and penetration. Directly ahead of the indenter tip the contours of strain energy density are approximately spheroidal in shape and far ahead the Boussinesq solution is recovered. The limit state of deep indentation is compared to that of cavity expansion; whilst several qualitative features are shared, the two limit states differ in their kinematic fields and in their sensitivity to the degree of strain stiffening in the Ogden solid.

cond-mat.soft↗

arXiv2025

Hyperelastic characterization via deep indentation

Hyperelastic material characterization is crucial for understanding the behavior of soft materials -- such as tissues, rubbers, hydrogels, and polymers -- under quasi-static loading before failure. Traditional methods typically rely on uniaxial tensile tests, which require the cumbersome preparation of dumbbell-shaped samples for clamping in a uniaxial testing machine. In contrast, indentation-based methods, which can be conducted \textit{in-situ} without sample preparation, have been underexplored. To characterize the hyperelastic behavior of soft materials, deep indentation is required, where the material response extends beyond linear elasticity. In this study, we perform finite element analysis to link the force ($F$) versus indentation depth ($D$) curve with the hyperelastic behavior of a soft incompressible material, using a one-term Ogden model for simplicity. We identify three indentation regimes based on the ratio between indentation depth and the radius ($R$) of the spherical-tipped cylindrical indenter: the Hertzian regime ($D < 0.1R$), where $F = \frac{16}{9} E R^{0.5} D^{1.5}$; the parabolic regime ($D > 10R$), where $F = E D^2 β$ and the indenter radius becomes irrelevant; and an intermediate regime ($0.1R < D < 10R$) bridging the two extremes. We find that the Ogden strain-stiffening coefficient ($α$) increases the parabolic indentation coefficient ($β$), allowing for the estimation of $α$ from $β$. Furthermore, we observe that Coulomb friction increases $β$, potentially masking the effect of strain-stiffening for small $α$. However, for $α> 3$, friction has a negligible effect. Finally, our results show good agreement with experimental data, demonstrating that deep indentation can be an effective method for extracting hyperelastic properties from soft materials through \textit{in-situ} testing.

cond-mat.soft↗

arXiv2024

Machine Learning Based Optimal Design of Fibrillar Adhesives

Fibrillar adhesion, observed in animals like beetles, spiders, and geckos, relies on nanoscopic or microscopic fibrils to enhance surface adhesion via 'contact splitting.' This concept has inspired engineering applications across robotics, transportation, and medicine. Recent studies suggest that functional grading of fibril properties can improve adhesion, but this is a complex design challenge that has only been explored in simplified geometries. While machine learning (ML) has gained traction in adhesive design, no previous attempts have targeted fibril-array scale optimization. In this study, we propose an ML-based tool that optimizes the distribution of fibril compliance to maximize adhesive strength. Our tool, featuring two deep neural networks (DNNs), recovers previous design results for simple geometries and introduces novel solutions for complex configurations. The Predictor DNN estimates adhesive strength based on random compliance distributions, while the Designer DNN optimizes compliance for maximum strength using gradient-based optimization. Our method significantly reduces test error and accelerates the optimization process, offering a high-performance solution for designing fibrillar adhesives and micro-architected materials aimed at fracture resistance by achieving equal load sharing (ELS).

cs.LG↗

arXiv2023

A model for the contraction kinetics of cytoskeletal gel slabs

Cytoskeletal gels are engineered prototypes that mimic the contractile behavior of a cell in-vitro. They are composed of an active polymer matrix and a liquid solvent. Their contraction kinetics is governed by two dynamic phenomena: mechanotransduction (molecular motor activation), and solvent diffusion. In this paper, we solve the transient problem for the simple case of a thin gel slab in uniaxial contraction under two extreme conditions: motor-limited or slow motor activation (SM) regime, and diffusion-limited or fast motor activation (FM) regime. The former occurs when diffusion is much faster than mechanotransduction, while the latter occurs in the opposite case. We observe that in the SM regime, the contraction time scales as t/t_0 ~ (l/l_0)^(-3), with t_0 the nominal contraction time, and l and l_0 are the final and initial stretches of the slab. t_0 is proportional to 1/w, where w is the average mechanical power generated by the molecular motors per unit reference (dry polymer) volume. In the FM regime, the contraction time scales as t/t_1 ~ (1-l/l_0)^2, with t_1 the nominal contraction time, here proportional to the ratio L^2/D, where L is the reference (dry polymer) thickness, and D is the diffusivity of the solvent in the gel. The transition between the SM and FM regimes is defined by a characteristic power density w^*, where w << w^* gives the SM regime and w >> w^* gives the FM regime. Intuitively, w^* is proportional to D/L^2, where, at a given power density w, a thinner gel slab (smaller L) or including smaller solvent molecules (higher D) is more likely to be in the SM regime given that solvent diffusion will occur faster than motor activation.

cond-mat.soft↗