arXiv subjects

Mohamed-Slim Alouini

Publications and source records attributed to Mohamed-Slim Alouini.

At least 289 records · Page 16Linked to original sources

arXiv2021

Artificial Intelligence for UAV-enabled Wireless Networks: A Survey

Unmanned aerial vehicles (UAVs) are considered as one of the promising technologies for the next-generation wireless communication networks. Their mobility and their ability to establish line of sight (LOS) links with the users made them key solutions for many potential applications. In the same vein, artificial intelligence (AI) is growing rapidly nowadays and has been very successful, particularly due to the massive amount of the available data. As a result, a significant part of the research community has started to integrate intelligence at the core of UAVs networks by applying AI algorithms in solving several problems in relation to drones. In this article, we provide a comprehensive overview of some potential applications of AI in UAV-based networks. We also highlight the limits of the existing works and outline some potential future applications of AI for UAV networks.

eess.SP↗

arXiv2021

On the Performance of Spectrum Sharing Backscatter Communication Systems

Spectrum sharing backscatter communication systems are among the most prominent technologies for ultralow power and spectrum efficient communications. In this paper, we propose an underlay spectrum sharing backscatter communication system, in which the secondary network is a backscatter communication system. We analyze the performance of the secondary network under a transmit power adaption strategy at the secondary transmitter, which guarantees that the interference caused by the secondary network to the primary receiver is below a predetermined threshold. We first derive a novel analytical expression for the cumulative distribution function (CDF) of the instantaneous signal-to-noise ratio of the secondary network. Capitalizing on the obtained CDF, we derive novel accurate approximate expressions for the ergodic capacity, effective capacity, and average bit error rate. We further validate our theoretical analysis using extensive Monte Carlo simulations.

cs.IT↗

arXiv2021

Artificial Intelligence for Satellite Communication: A Review

Satellite communication offers the prospect of service continuity over uncovered and under-covered areas, service ubiquity, and service scalability. However, several challenges must first be addressed to realize these benefits, as the resource management, network control, network security, spectrum management, and energy usage of satellite networks are more challenging than that of terrestrial networks. Meanwhile, artificial intelligence (AI), including machine learning, deep learning, and reinforcement learning, has been steadily growing as a research field and has shown successful results in diverse applications, including wireless communication. In particular, the application of AI to a wide variety of satellite communication aspects have demonstrated excellent potential, including beam-hopping, anti-jamming, network traffic forecasting, channel modeling, telemetry mining, ionospheric scintillation detecting, interference managing, remote sensing, behavior modeling, space-air-ground integrating, and energy managing. This work thus provides a general overview of AI, its diverse sub-fields, and its state-of-the-art algorithms. Several challenges facing diverse aspects of satellite communication systems are then discussed, and their proposed and potential AI-based solutions are presented. Finally, an outlook of field is drawn, and future steps are suggested.

eess.SP↗

arXiv2021

Smart Buildings Enabled by 6G Communications

Smart building (SB), a promising solution to fast-paced and continuous urbanization around the world, includes the integration of a wide range of systems and services and involves the construction of multiple layers. SB is capable of sensing, acquiring, and processing a very large amount of data as well as performing appropriate actions and adaptation. Rapid increases in the number of connected nodes and thereby the data transmission demand of SB have led to conventional transmission and processing techniques becoming insufficient to provide satisfactory services. In order to enhance the intelligence of SBs and achieve efficient monitoring and control, sixth generation (6G) communication technologies, particularly indoor visible light communications (VLC) and machine learning (ML), are required to be incorporated in SBs. Herein, we envision a novel SB framework featuring a reliable data transmission network, powerful data processing, and reasoning abilities, all of which are enabled by 6G communications. Primary simulation results support the promising visions of the proposed SB framework.

cs.NI↗

arXiv2021

Wireless Power Transfer for Future Networks: Signal Processing, Machine Learning, Computing, and Sensing

Wireless power transfer (WPT) is an emerging paradigm that will enable using wireless to its full potential in future networks, not only to convey information but also to deliver energy. Such networks will enable trillions of future low-power devices to sense, compute, connect, and energize anywhere, anytime, and on the move. The design of such future networks brings new challenges and opportunities for signal processing, machine learning, sensing, and computing so as to make the best use of the RF radiations, spectrum, and network infrastructure in providing cost-effective and real-time power supplies to wireless devices and enable wireless-powered applications. In this paper, we first review recent signal processing techniques to make WPT and wireless information and power transfer as efficient as possible. Topics include power amplifier and energy harvester nonlinearities, active and passive beamforming, intelligent reflecting surfaces, receive combining with multi-antenna harvester, modulation, coding, waveform, massive MIMO, channel acquisition, transmit diversity, multi-user power region characterization, coordinated multipoint, and distributed antenna systems. Then, we overview two different design methodologies: the model and optimize approach relying on analytical system models, modern convex optimization, and communication theory, and the learning approach based on data-driven end-to-end learning and physics-based learning. We discuss the pros and cons of each approach, especially when accounting for various nonlinearities in wireless-powered networks, and identify interesting emerging opportunities for the approaches to complement each other. Finally, we identify new emerging wireless technologies where WPT may play a key role -- wireless-powered mobile edge computing and wireless-powered sensing -- arguing WPT, communication, computation, and sensing must be jointly designed.

cs.IT↗

arXiv2020

Point-to-Point Communication in Integrated Satellite-Aerial Networks: State-of-the-art and Future Challenges

This paper overviews point-to-point (P2P) links for integrated satellite-aerial networks, which are envisioned to be among the key enablers of the sixth-generation (6G) of wireless networks vision. The paper first outlines the unique characteristics of such integrated large-scale complex networks, often denoted by spatial networks, and focuses on two particular space-air infrastructures, namely, satellites networks and high-altitude platforms (HAPs). The paper then classifies the connecting P2P communications links as satellite-to-satellite links at the same layer (SSLL), satellite-to-satellite links at different layers (SSLD), and HAP-to-HAP links (HHL). The paper overviews each layer of such spatial networks separately, and highlights the possible natures of the connecting links (i.e., radio-frequency or free-space optics) with a dedicated overview to the existing link-budget results. The paper, afterwards, presents the prospective merit of realizing such an integrated satellite-HAP network towards providing broadband services in under-served and remote areas. Finally, the paper sheds light on several future research directions in the context of spatial networks, namely large-scale network optimization, intelligent offloading, smart platforms, energy efficiency, multiple access schemes, and distributed spatial networks.

eess.SP↗

arXiv2020

On Delay-limited Average Rate of HARQ-based Predictor Antenna Systems

Predictor antenna (PA) system is referred to as a system with two sets of antennas on the roof of a vehicle, where the PAs positioned in the front of the vehicle are used to predict the channel state observed by the receive antennas (RAs) that are aligned behind the PAs. In this work, we study the effect of spatial mismatch on the accuracy of channel state information estimation, and analyze the delay-constrained average rate of hybrid automatic repeat request (HARQ)-based PA systems. We consider variable-length incremental redundancy (INR) HARQ protocol, and derive a closed-form expression for the maximum average rate subject to a maximum delay constraint. Moreover, we study the effect of different parameters such as the vehicle speed, the antenna distance and the rate allocation on the system performance. The results indicate that, compared to the open-loop case, the delay-limited average rate is considerably improved with our proposed PA-HARQ scheme.

cs.IT↗

arXiv2020

A Semi-Linear Approximation of the First-Order Marcum $Q$-function with Application to Predictor Antenna Systems

First-order Marcum $Q$-function is observed in various problem formulations. However, it is not an easy-to-handle function. For this reason, in this paper, we first present a semi-linear approximation of the Marcum $Q$-function. Our proposed approximation is useful because it simplifies, e.g., various integral calculations including Marcum $Q$-function as well as different operations such as parameter optimization. Then, as an example of interest, we apply our proposed approximation approach to the performance analysis of predictor antenna (PA) systems. Here, the PA system is referred to as a system with two sets of antennas on the roof of a vehicle. Then, the PA positioned in the front of the vehicle can be used to improve the channel state estimation for data transmission of the receive antenna that is aligned behind the PA. Considering spatial mismatch due to the mobility, we derive closed-form expressions for the instantaneous and average throughput as well as the throughput-optimized rate allocation. As we show, our proposed approximation scheme enables us to analyze PA systems with high accuracy. Moreover, our results show that rate adaptation can improve the performance of PA systems with different levels of spatial mismatch.

cs.IT↗

arXiv2020

Applying Deep-Learning-Based Computer Vision to Wireless Communications: Methodologies, Opportunities, and Challenges

Deep learning (DL) has seen great success in the computer vision (CV) field, and related techniques have been used in security, healthcare, remote sensing, and many other fields. As a parallel development, visual data has become universal in daily life, easily generated by ubiquitous low-cost cameras. Therefore, exploring DL-based CV may yield useful information about objects, such as their number, locations, distribution, motion, etc. Intuitively, DL-based CV can also facilitate and improve the designs of wireless communications, especially in dynamic network scenarios. However, so far, such work is rare in the literature. The primary purpose of this article, then, is to introduce ideas about applying DL-based CV in wireless communications to bring some novel degrees of freedom to both theoretical research and engineering applications. To illustrate how DL-based CV can be applied in wireless communications, an example of using a DL-based CV with a millimeter-wave (mmWave) system is given to realize optimal mmWave multiple-input and multiple-output (MIMO) beamforming in mobile scenarios. In this example, we propose a framework to predict future beam indices from previously observed beam indices and images of street views using ResNet, 3-dimensional ResNext, and a long short-term memory network. The experimental results show that our frameworks achieve much higher accuracy than the baseline method, and that visual data can significantly improve the performance of the MIMO beamforming system. Finally, we discuss the opportunities and challenges of applying DL-based CV in wireless communications.

eess.SP↗

arXiv2020

Adaptive Coded Modulation for IM/DD Free-Space Optical Backhauling: A Probabilistic Shaping Approach

In this paper, we propose a practical adaptive coding modulation scheme to approach the capacity of free-space optical (FSO) channels with intensity modulation/direct detection based on probabilistic shaping. The encoder efficiently adapts the transmission rate to the signal-to-noise ratio, accounting for the fading induced by the atmospheric turbulence. The transponder can support an arbitrarily large number of transmission modes using a low complexity channel encoder with a small set of supported rates. Hence, it can provide a solution for FSO backhauling in terrestrial and satellite communication systems to achieve higher spectral efficiency. We propose two algorithms to determine the capacity and capacity-achieving distribution of the scheme with unipolar M-ary pulse amplitude modulation (M-PAM) signaling. Then, the signal constellation is probabilistically shaped according to the optimal distribution, and the shaped signal is channel encoded by an efficient binary forward error correction scheme. Extensive numerical results and simulations are provided to evaluate the performance. The proposed scheme yields a rate close to the tightest lower bound on the capacity of FSO channels. For instance, the coded modulator operates within 0.2 dB from the M-PAM capacity, and it outperforms uniform signaling with more than 1.7 dB, at a transmission rate of 3 bits per channel use.

cs.IT↗

arXiv2020

Free-Space Optical Communication Using Non-mode-Selective Photonic Lantern Based Coherent Receiver

A free-space optical communication system using non-mode-selective photonic lantern (PL) based coherent receiver is studied. Based on the simulation of photon distribution, the power distribution at the single-mode fiber end of the PL is quantitatively described as a truncated Gaussian distribution over a simplex. The signal-to-noise ratios (SNRs) for the communication system using PL based receiver are analyzed using different combining techniques, including selection combining (SC), equal-gain combining (EGC), and maximal-ratio combining (MRC). The integral solution, series lower bound solution and asymptotic solution are presented for bit-error rate (BER) of PL based receiver, single-mode fiber receiver and multimode fiber receiver over the Gamma-Gamma atmosphere turbulence channels. We demonstrate that the power distribution of the PL has no effect on the SNR and BER performance of the PL based receiver when MRC is used; and it only has limited influence when EGC is used. However, the power distribution of the PL can greatly affect the BER performance when SC is used. Besides, the SNR gains of the PL based receiver using EGC over single-mode fiber receiver and multimode fiber receiver are numerically studied under different imperfect device parameters; and the scope of application of the communication system is further provided.

eess.SP↗

arXiv2020

Performance Analysis of Dual-Hop Mixed PLC/RF Communication Systems

In this paper, we study a dual-hop mixed power line communication and radio-frequency communication (PLC/RF) system, where the connection between the PLC link and the RF link is made by a decode-and-forward (DF) or amplify-and-forward (AF) relay. Assume that the PLC channel is affected by both additive background noise and impulsive noise suffers from Log-normal fading, while the RF link undergoes Rician fading. Based on this model, analytical expressions of the outage probability (OP), average bit error rate (BER), and the average channel capacity (ACC) are derived. Furthermore, an asymptotic analysis for the OP and average BER, as well as an upper bound expression for the ACC are presented. At last, numerical results are developed to validate our analytical results, and in-depth discussions are conducted.

cs.IT↗

arXiv2020

On the Performance of RIS-Assisted Dual-Hop Mixed RF-UWOC Systems

In this paper, we investigate the performance of a reconfigurable intelligent surface (RIS)-assisted dual-hop mixed radio-frequency underwater wireless optical communication (RF-UWOC) system. An RIS is an emerging and low-cost technology that aims to enhance the strength of the received signal, thus improving the system performance. In the considered system setup, a ground source does not have a reliable direct link to a given marine buoy and communicates with it through an RIS installed on a building. In particular, the buoy acts as a relay that sends the signal to an underwater destination. In this context, analytical expressions for the outage probability (OP), average bit error rate (ABER), and average channel capacity (ACC) are derived assuming fixed-gain amplify-and-forward (AF) and decode-and-forward (DF) relaying protocols at the marine buoy. Moreover, asymptotic analyses of the OP and ABER are carried out in order to gain further insights from the analytical frameworks. In particular, the system diversity order is derived and it is shown to depend on the RF link parameters and on the detection schemes of the UWOC link. Finally, it is demonstrated that RIS-assisted systems can effectively improve the performance of mixed dual-hop RF-UWOC systems.

cs.IT↗

arXiv2020

Free-Space Optical Communication With Reconfigurable Intelligent Surfaces

Despite the promising gains, free-space optical (FSO) communication is severely influenced by atmospheric turbulence and pointing error issues, which make its practical design a bit challenging. In this paper, with the aim to increase the communication coverage and improve the system performance, reconfigurable intelligent surfaces (RISs) are considered in an FSO communication setup, in which both atmospheric turbulence and pointing errors are considered. Closed-form expressions for the outage probability, average bit error rate, and channel capacity are derived assuming large number of reflecting elements at the RIS. Specifically, according to central limit theorem (CLT), while assuming multiple reflecting elements approximate expressions are proposed. It is shown that the respective accuracies increase as the number of elements at the RIS increases. Illustrative numerical examples are shown along with insightful discussions. Finally, Monte Carlo simulations are presented to verify the correctness of the analytical results.

cs.IT↗

arXiv2020

Optimal Deployment of Tethered Drones for Maximum Cellular Coverage in User Clusters

Unmanned aerial vehicle (UAV) assisted cellular communication is gaining significant interest recently. Although it offers several advantages over terrestrial communication, UAV communication suffers from two main shortcomings. The typical untethered UAV (uUAV) has a limited battery power supply and therefore limited flying time, and it needs an extra wireless backhaul link to connect users to the core network. In this paper, we propose the utilization of the tethered UAV (tUAV) to assist the cellular network, where the tether provides power supply and connects the tUAV to the core network through high capacity link. The tUAV however has a limited mobility due to the limited tether length. A stochastic geometry-based analysis is provided for the coverage probability of an UAV-assisted cellular network where the mobile users located within a circular hot-spot. For that setup, we analyze and compare two scenarios: (i) utilizing uUAV and (ii) utilizing tUAV, for offloading the terrestrial base station (TBS). We capture the aforementioned limitations of each of the uUAV and the tUAV in our analysis. A novel user association analysis is provided given the TBS and the UAV locations. Next, we study the optimal locations of the uUAV and the tUAV to maximize the coverage probability. Multiple useful insights are revealed. For instance, numerical results show that tUAVs outperform uUAVs when the tether length is above 75 m, given that the uUAV is available for 80% of the time due to its battery limitations.

cs.NI↗

arXiv2020

Grant-Free Opportunistic Uplink Transmission in Wireless-powered IoT: A Spatio-temporal Model

Ambient radio frequency (RF) energy harvesting is widely promoted as an enabler for wireless-power Internet of Things (IoT) networks. This paper jointly characterizes energy harvesting and packet transmissions in grant-free opportunistic uplink IoT networks energized via harvesting downlink energy. To do that, a joint queuing theory and stochastic geometry model is utilized to develop a spatio-temporal analytical model. Particularly, the harvested energy and packet transmission success probability are characterized using tools from stochastic geometry. {Moreover, each device is modeled using a two-dimensional discrete-time Markov chain (DTMC). Such two dimensions are utilized to jointly track the scavenged/depleted energy to/from the batteries along with the arrival/departure of packets to/from devices buffers over time. Consequently, the adopted queuing model represents the devices as spatially interacting queues. To that end, the network performance is assessed in light of the packet throughput, the average delay, and the average buffer size. The effect of base stations (BSs) densification is discussed and several design insights are provided. The results show that the parameters for uplink power control and opportunistic channel access should be jointly optimized to maximize average network packet throughput, and hence, minimize delay.

cs.IT↗

arXiv2020

Impact of RF I/Q Imbalance on Interference-Limited Mixed RF/FSO TWR Systems with Non-Zero Boresight Error

In this letter, we investigate a generic model assessing the effect of in-phase/quadrature-phase imbalance (IQI) on an asymmetric dual hop radio frequency/free space optical (RF/FSO) two-way relay (TWR) system in the presence of multiple co-channel interferers (CCIs) at the relay. The fading on the RF and FSO links have been modeled using K-distribution and double generalized Gamma (D-GG) turbulence model, respectively. The impact of non-zero boresight pointing error and type of optical demodulation schemes have been considered on the FSO link. To this end, a closed-form probability density function (PDF) has been derived for the FSO link undergoing D-GG irradiance with non-zero boresight pointing error. Furthermore, the exact and high signal-to-noise (SNR) asymptotic expression for outage probability have been presented. To gain insights into the throughput of the system, approximate and asymptotic expressions for the achievable sum rate (ASR) have been derived. The results show dependency of reliability and throughput offered on IQI at the RF front-end and strength of interference for the considered TWR system.

cs.IT↗

arXiv2020

Differential Reflecting Modulation for Reconfigurable Intelligent Surface Based Communications

Reconfigurable intelligent surface (RIS) based communications have emerged as a new paradigm. This letter proposes a differential reflecting modulation (DRM) scheme for RIS based communication systems. In DRM, information bits are jointly carried by the activation permutations of the reflecting patterns and the phases of the transmitted signals, leading to that DRM can work without any channel state information (CSI) at the transmitter, RIS or receiver. In other words, DRM can release the intricate and resource-consuming channel estimation in the transmission process. Simulation results show that the proposed DRM pays an acceptable SNR penalty compared to non-differential modulation with coherent detection.

eess.SP↗