arXiv subjects

Mohamed-Slim Alouini

Publications and source records attributed to Mohamed-Slim Alouini.

At least 181 records · Page 10Linked to original sources

arXiv2023

Harnessing the Potential of Optical Communications for the Metaverse

The Metaverse is a digital world that offers an immersive virtual experience. However, the Metaverse applications are bandwidth-hungry and delay-sensitive that require ultrahigh data rates, ultra-low latency, and hyper-intensive computation. To cater for these requirements, optical communication arises as a key pillar in bringing this paradigm into reality. We highlight in this paper the potential of optical communications in the Metaverse. First, we set forth Metaverse requirements in terms of capacity and latency; then, we introduce ultra-high data rates requirements for various Metaverse experiences. Then, we put forward the potential of optical communications to achieve these data rate requirements in backbone, backhaul, fronthaul, and access segments. Both optical fiber and optical wireless communication (OWC) technologies, as well as their current and future expected data rates, are detailed. In addition, we propose a comprehensive set of configurations, connectivity, and equipment necessary for an immersive Metaverse experience. Finally, we identify a set of key enablers and research directions such as analog neuromorphic optical computing, optical intelligent reflective surfaces (IRS), hollow core fiber (HCF), and terahertz (THz).

eess.SP↗

arXiv2023

Multi-band Wireless Networks: Architectures, Challenges, and Comparative Analysis

This paper presents the vision of multi-band communication networks (MBN) in 6G, where optical and TeraHertz (THz) transmissions will coexist with the conventional radio frequency (RF) spectrum. This paper will first pin-point the fundamental challenges in MBN architectures at the PHYsical (PHY) and Medium Access (MAC) layer, such as unique channel propagation and estimation issues, user offloading and resource allocation, multi-band transceiver design and antenna systems, mobility and handoff management, backhauling, etc. We then perform a quantitative performance assessment of the two fundamental MBN architectures, i.e., {stand-alone MBN} and {integrated MBN} considering critical factors like achievable rate, and capital/operational deployment cost. {Our results show that stand-alone deployment is prone to higher capital and operational expenses for a predefined data rate requirement. Stand-alone deployment, however, offers flexibility and enables controlling the number of access points in different transmission bands.} In addition, we propose a molecular absorption-aware user offloading metric for MBNs and demonstrate its performance gains over conventional user offloading schemes. Finally, open research directions are presented.

cs.IT↗

arXiv2023

LoRa Backscatter Communications: Temporal, Spectral, and Error Performance Analysis

LoRa backscatter (LB) communication systems can be considered as a potential candidate for ultra low power wide area networks (LPWAN) because of their low cost and low power consumption. In this paper, we comprehensively analyze LB modulation from various aspects, i.e., temporal, spectral, and error performance characteristics. First, we propose a signal model for LB signals that accounts for the limited number of loads in the tag. Then, we investigate the spectral properties of LB signals, obtaining a closed-form expression for the power spectrum. Finally, we derived the symbol error rate (SER) of LB with two decoders, i.e., the maximum likelihood (ML) and fast Fourier transform (FFT) decoders, in both additive white Gaussian noise (AWGN) and double Nakagami-m fading channels. The spectral analysis shows that out-of-band emissions for LB satisfy the European Telecommunications Standards Institute (ETSI) regulation only when considering a relatively large number of loads. For the error performance, unlike conventional LoRa, the FFT decoder is not optimal. Nevertheless, the ML decoder can achieve a performance similar to conventional LoRa with a moderate number of loads.

cs.IT↗

arXiv2023

Machine Learning-Based Automatic Cardiovascular Disease Diagnosis Using Two ECG Leads

The state-of-the-art cardiovascular disease diagnosis techniques use machine-learning algorithms based on feature extraction and classification. In this work, in contrast to a conventional single Electrocardiogram (ECG) lead, two leads are used, and autoregressive (AR) coefficients and statistical parameters are extracted to be used as features. Four machine-learning classifiers support-vector-machine (SVM), K-nearest neighbors (KNN), multi-layer perceptron (MLP), and Naive Bayes are applied on these features to test the accuracy of each classifier. For simulation, data is collected from the MIT-BIH and Shaoxing Peoples Hospital China (SPHC) database. To test the generalization ability of our proposed methodology machine-learning model is built on the SPHC database and tested on the MIT-BIH database and self-collected datasets. In the single-database simulation, the MLP performs better than the other three classifiers. While in the cross-database simulation, the SVM-based model trained by the SPHC database shows superiority. For normal and LBBB heartbeats, the predicted recall respectively reaches 100% and 98.4%. Simulation results show that the performance of our proposed methodology is better than the state-of-the-art techniques for the same database. While for cross-database simulation, the results are promising too. Finally, in the demonstration of our realized system, all heartbeats collected from healthy people are classified as normal beats.

eess.SP↗

arXiv2023

eVTOL Communications and Networking in UAM: Requirements, Key Enablers, and Challenges

Electric vertical takeoff and landing (eVTOL) aircraft have attracted great attention during the last years as the long-awaited enabler of urban air mobility (UAM), allowing a more sustainable method of transportation and accelerating the development of smart cities. The operation of eVTOLs over urban areas introduces safety hazards for passengers, pedestrians, and buildings, which prioritises safety considerations. Ensuring the safe operation of eVTOLs requires studying their communication, networking, computing requirements. In this paper, we showcase eVTOL requirements in UAM in terms of coverage, data rate, latency, spectrum efficiency, networking, and computing. Then, we identify potential key technological enablers to address these requirements and their challenges. Finally, we carry out a comparative case study between the terrestrial and aerial communication infrastructures to serve eVTOLs in UAM.

eess.SP↗

arXiv2023

A Survey on Scalable LoRaWAN for Massive IoT: Recent Advances, Potentials, and Challenges

Long-range (LoRa) technology is most widely used for enabling low-power wide area networks (WANs) on unlicensed frequency bands. Despite its modest data rates, it provides extensive coverage for low-power devices, making it an ideal communication system for many internet of things (IoT) applications. In general, LoRa is considered as the physical layer, whereas LoRaWAN is the medium access control (MAC) layer of the LoRa stack that adopts a star topology to enable communication between multiple end devices (EDs) and the network gateway. The chirp spread spectrum modulation deals with LoRa signal interference and ensures long-range communication. At the same time, the adaptive data rate mechanism allows EDs to dynamically alter some LoRa features, such as the spreading factor (SF), code rate, and carrier frequency to address the time variance of communication conditions in dense networks. Despite the high LoRa connectivity demand, LoRa signals interference and concurrent transmission collisions are major limitations. Therefore, to enhance LoRaWAN capacity, the LoRa Alliance released many LoRaWAN versions, and the research community has provided numerous solutions to develop scalable LoRaWAN technology. Hence, we thoroughly examine LoRaWAN scalability challenges and state-of-the-art solutions in both the physical and MAC layers. These solutions primarily rely on SF, logical, and frequency channel assignment, whereas others propose new network topologies or implement signal processing schemes to cancel the interference and allow LoRaWAN to connect more EDs efficiently. A summary of the existing solutions in the literature is provided at the end of the paper, describing the advantages and disadvantages of each solution and suggesting possible enhancements as future research directions.

cs.NI↗

arXiv2023

Coverage analysis of Tethered UAV-assisted Large Scale Cellular Networks

One of the major challenges slowing down the use of unmanned aerial vehicles (UAVs) as aerial base stations (ABSs) is the limited on-board power supply which reduces the UAV's flight time. Using a tether to provide UAVs with power can be considered a reasonable compromise that will enhance the flight time while limiting the UAV's mobility. In this work, we propose a system where ABSs are deployed at the centers of user hotspots to offload the traffic and assist terrestrial base stations (TBSs). Firstly, given the location of the ground station in the user hotspot (user cluster) and the users spatial distribution, we compute the optimal inclination angle and length of the tether. Using these results, we compute the densities of the tethered UAVs deployed at different altitudes, which enables tractable analysis of the interference in the considered setup. Next, using tools from stochastic geometry and an approach of dividing user clusters into finite frames, we analyze the coverage probability as a function of the maximum tether length, the density of accessible rooftops for UAV ground station deployment, and the density of clusters. We verify our findings using Monte-Carlo simulations and draw multiple useful insights. For instance, we show that it is actually better to deploy UAVs at a fraction of the clusters, not all of them as it is usually assumed in literature.

eess.SY↗

arXiv2023

Lidar-Assisted Acquisition of Mobile Airborne FSO Terminals in a GPS-Denied Environment

For acquisition of narrow-beam free-space optical (FSO) terminals, a Global Positioning System (GPS) is typically required for coarse localization of the terminal. However, the GPS signal may be shadowed, or may not be present at all, especially in rough or unnameable terrains. In this study, we propose a lidar-assisted acquisition of an unmanned aerial vehicle (UAV) for FSO communications in a poor GPS environment. Such an acquisition system consists of a lidar subsystem and an FSO acquisition subsystem: The lidar subsystem is used for coarse acquisition of the UAV, whereas, the FSO subsystem is utilized for fine acquisition to obtain the UAV's accurate position. This study investigates the optimal allocation of energy between the lidar and FSO subsystems to minimize the acquisition time. Here, we minimize the average acquisition time, and maximize the cumulative distribution function of acquisition time for a fixed threshold. We learn that an optimal value of the energy allocation factor exists that provides the best performance for the proposed acquisition system.

eess.SP↗

arXiv2023

Coverage Analysis and Trajectory Optimization for Aerial Users with Dedicated Cellular Infrastructure

In this paper, we consider a novel cellular network for aerial users, which is composed of dedicated base stations (BSs), whose antennas are directed towards aerial users, and traditional terrestrial BSs (TBSs). Besides, the dedicated BSs are deployed on roadside furniture, such as lampposts and traffic lights, to achieve multiple features while occupying less space. Therefore, the locations of dedicated BSs and TBSs are modeled by a Poisson-line-Cox-process (PLCP) and Poisson point process (PPP), respectively. For the proposed network, we first compute the aerial coverage probability and show that the deployment of dedicated BSs improves the coverage probability in both high dense areas and rural areas. We then consider a cellular-connected UAV that has a flying mission and optimize its trajectory to maximize the minimal achievable signal-to-interference-plus-noise ratio (SINR) (Max-Min SINR). To obtain the Max-Min SINR and minimal time trajectory that satisfies the Max-Min SINR, we proposed two algorithms that are practical in large-scale networks. Finally, our results show that the optimal density of dedicated BSs which maximizes Max-Min SINR decreases with the increase of the road densities.

eess.SY↗

arXiv2023

Coverage Analysis of Hybrid RF/THz Networks With Best Relay Selection

Utilizing terahertz (THz) transmission to enhance coverage has proven various benefits compared to traditional radio frequency (RF) counterparts. This letter proposes a dual-hop decode-and-forward (DF) routing protocol in a hybrid RF and THz relay network named hybrid relay selection (HRS). The coverage probability of the HRS protocol is derived. The HRS protocol prioritizes THz relays for higher data rates or short source-destination distances; and RF relays for lower data rates or large source-destination distances. The proposed HRS protocol offers nearly the same performance as the optimal selection protocol, which requires complete instantaneous channel state information (CSI) of all the nodes.

cs.IT↗

arXiv2023

Performance Analysis of Passive Retro-Reflector Based Tracking in Free-Space Optical Communications with Pointing Errors

In this correspondence, we propose a diversity-achieving retroreflector-based fine tracking system for free-space optical (FSO) communications. We show that multiple retroreflectors deployed around the communication telescope at the aerial vehicle save the payload capacity and enhance the outage performance of the fine tracking system. Through the analysis of the joint-pointing loss of the multiple retroreflectors, we derive the ordered moments of the received power. Our analysis can be further utilized for studies on multiple input multiple output (MIMO)-FSO. After the moment-based estimation of the received power distribution, we numerically analyze the outage performance. The greatest challenge of retroreflector-based FSO communication is a significant decrease in power. Still, our selected numerical results show that, from an outage perspective, the proposed method can surpass conventional methods.

cs.IT↗

arXiv2023

An Interdisciplinary Approach to Optimal Communication and Flight Operation of High-Altitude Long-Endurance Platforms

Aerial communication platforms, stratospheric high-altitude platform stations (HAPS), have the potential to provide/catalyze advanced mobile wireless communication services with its ubiquitous connectivity and ultra-wide coverage radius. Recently, HAPS has gained immense popularity - achieved primarily through self-sufficient energy systems - to render long-endurance characteristics. The photo-voltaic cells mounted on the aircraft harvest solar energy during the day, which can be partially used for communication and station-keeping, whereas, the excess is stored in the rechargeable batteries for the night time sustenance. We carry out an adroit power budgeting to ascertain if the available solar power can simultaneously and efficiently self-sustain the requisite propulsion and communication power expense. We further propose an energy optimum trajectory for station-keeping flight and non-orthogonal multiple access (NOMA) for multi-cell users, which are served by the directional beams from HAPS communication systems. We design optimal power allocation for downlink (DL) NOMA users along with the ideal position and speed of flight with the aim to maximize sum data rate during the day and minimize power expenditure during the night, while ensuring quality of service. Our findings reveal the significance of joint design of communication and aerodynamics parameters for optimum energy utilization and resource allocation.

eess.SP↗

arXiv2023

Reliability Analysis of Multi-hop Routing in Multi-tier LEO Satellite Networks

This article studies the reliability of multi-hop routing in a multi-tier hybrid satellite-terrestrial relay network (HSTRN). We evaluate the reliability of multi-hop routing by introducing interruption probability, which is the probability that no relay device (ground gateway or satellite) is available during a hop. The single-hop interruption probability is derived and extended to the multi-hop interruption probability using a stochastic geometry-based approach. Since the interruption probability in HSTRN highly depends on the priority of selecting communication devices at different tiers, we propose three priority strategies: (i) stationary optimal priority strategy, (ii) single-hop interruption probability inspired strategy, and (iii) density inspired strategy. Among them, the interruption probability under the stationary optimal priority strategy can approach the ideal lower bound. However, when analyzing an HSTRN with a large number of tiers, the stationary optimal priority strategy is computationally expensive. The single-hop interruption probability inspired strategy is expected to be a low-complexity but less reliable alternative to the stationary optimal priority strategy. In numerical results, we study the complementarity between terrestrial devices and satellites. Furthermore, analytical results for reliability are also applicable to the analysis of satellite availability, coverage probability, and ultra-reliable and low latency communications (URLLC) rate. Finally, we extend our original routing strategy into a multi-flow one with dynamic priority strategy.

cs.NI↗

arXiv2023

Dominance of Smartphone Exposure in 5G Mobile Networks

The deployment of 5G networks is sometimes questioned due to the impact of ElectroMagnetic Field (EMF) generated by Radio Base Station (RBS) on users. The goal of this work is to analyze such issue from a novel perspective, by comparing RBS EMF against exposure generated by 5G smartphones in commercial deployments. The measurement of exposure from 5G is hampered by several implementation aspects, such as dual connectivity between 4G and 5G, spectrum fragmentation, and carrier aggregation. To face such issues, we deploy a novel framework, called 5G-EA, tailored to the assessment of smartphone and RBS exposure through an innovative measurement algorithm, able to remotely control a programmable spectrum analyzer. Results, obtained in both outdoor and indoor locations, reveal that smartphone exposure (upon generation of uplink traffic) dominates over the RBS one. Moreover, Line-of-Sight locations experience a reduction of around one order of magnitude on the overall exposure compared to Non-Line-of-Sight ones. In addition, 5G exposure always represents a small share (up to 38%) compared to the total one radiated by the smartphone.

cs.NI↗

arXiv2023

Joint Uplink and Downlink EMF Exposure: Performance Analysis and Design Insights

Installing more base stations (BSs) into the existing cellular infrastructure is an essential way to provide greater network capacity and higher data rate in the 5th-generation cellular networks (5G). However, a non-negligible amount of population is concerned that such network densification will generate a notable increase in exposure to electric and magnetic fields (EMF) over the territory. In this paper, we analyze the downlink, uplink, and joint downlink&uplink exposure induced by the radiation from BSs and personal user equipment (UE), respectively, in terms of the received power density and exposure index. In our analysis, we consider the EMF restrictions set by the regulatory authorities such as the minimum distance between restricted areas (e.g., schools and hospitals) and BSs, and the maximum permitted exposure. Exploiting tools from stochastic geometry, mathematical expressions for the coverage probability and statistical EMF exposure are derived and validated. Tuning the system parameters such as the BS density and the minimum distance from a BS to restricted areas, we show a trade-off between reducing the population's exposure to EMF and enhancing the network coverage performance. Then, we formulate optimization problems to maximize the performance of the EMF-aware cellular network while ensuring that the EMF exposure complies with the standard regulation limits with high probability. For instance, the exposure from BSs is two orders of magnitude less than the maximum permissible level when the density of BSs is less than 20 BSs/km2.

eess.SP↗

arXiv2023

UAV-Aided Post-Disaster Cellular Networks: A Novel Stochastic Geometry Approach

Motivated by the need for ubiquitous and reliable communications in post-disaster emergency management systems (EMSs), we hereby present a novel and efficient stochastic geometry (SG) framework. This mathematical model is specifically designed to evaluate the quality of service (QoS) experienced by a typical ground user equipment (UE) residing either inside or outside a generic area affected by a calamity. In particular, we model the functioning terrestrial base stations (TBSs) as an inhomogeneous Poisson point process (IPPP), and assume that a given number of uniformly distributed unmanned aerial vehicles (UAVs) equipped with cellular transceivers is deployed in order to compensate for the damage suffered by some of the existing TBSs. The downlink (DL) coverage probability is then derived based on the maximum average received power association policy and the assumption of Nakagami-m fading conditions for all wireless links. The proposed numerical results show insightful trends in terms of coverage probability, depending on: distance of the UE from the disaster epicenter, disaster radius, quality of resilience (QoR) of the terrestrial network, and fleet of deployed ad-hoc aerial base stations (ABSs). The aim of this paper is therefore to prove the effectiveness of vertical heterogeneous networks (VHetNets) in emergency scenarios, which can both stimulate the involved authorities for their implementation and inspire researchers to further investigate related problems.

eess.SY↗

arXiv2023

System-Level Metrics for Non-Terrestrial Networks Under Stochastic Geometry Framework

Non-terrestrial networks (NTNs) are considered one of the key enablers in sixth-generation (6G) wireless networks; and with their rapid growth, system-level metrics analysis adds crucial understanding into NTN system performance. Applying stochastic geometry (SG) as a system-level analysis tool in the context of NTN offers novel insights into the network tradeoffs. In this paper, we study and highlight NTN common system-level metrics from three perspectives: NTN platform types, typical communication issues, and application scenarios. In addition to summarizing existing research, we study the best-suited SG models for different platforms and system-level metrics which have not been well studied in the literature. In addition, we showcase NTN-dominated prospective application scenarios. Finally, we carry out a performance analysis of system-level metrics for these applications based on SG models.

cs.NI↗

arXiv2023

A Dominant Interferer plus Mean Field-based Approximation for SINR Meta Distribution in Wireless Networks

This paper proposes a novel approach for computing the meta distribution of the signal-to-interference-plus-noise ratio (SINR) for the downlink transmission in a wireless network with Rayleigh fading. The novel approach relies on an approximation mix of exact and mean-field analysis of interference (dominant interferer-based approximation) to reduce the complexity of analysis and enhance tractability. In particular, the proposed approximation omits the need to compute the first or the second moment of the SINR that is used in the beta approximation typically adopted in the literature but requires of computing the joint distance distributions. We first derive the proposed approximation based on a Poisson point process (PPP) network with a standard path-loss and Rayleigh fading and then illustrate its accuracy and operability in another four widely used point processes: Poisson bipolar network, Matérn cluster process (MCP), $K$-tier PPP and Poisson line Cox process (PLCP). Specifically, we obtain the SINR meta distribution for PLCP networks for the first time. Even though the proposed approximation looks simple but it shows good matching in comparison to the popular beta approximation as well as the Monte-Carlo simulations, which opens the door to adopting this approximation in more advanced network architectures.

cs.IT↗