arXiv subjects

Mingda Han

Publications and source records attributed to Mingda Han.

6 recordsLinked to original sources

arXiv2026

VoxAnchor: Grounding Speech Authenticity in Throat Vibration via mmWave Radar

Rapid advances in speech synthesis and audio editing have made realistic forgeries increasingly accessible, yet existing detection methods remain vulnerable to tampering or depend on visual/wearable sensors. In this paper, we present VoxAnchor, a system that physically grounds audio authentication in vocal dynamics by leveraging the inherent coherence between speech acoustics and radar-sensed throat vibrations. VoxAnchor uses contactless millimeter-wave radar to capture fine-grained throat vibrations that are tightly coupled with human speech production, establishing a hard-to-forge anchor rooted in human physiology. The design comprises three main components: (1) a cross-modal frame-work that uses modality-specific encoders and contrastive learning to detect subtle mismatches at word granularity; (2) a phase-aware pipeline that extracts physically consistent, temporally faithful throat vibrations; and (3) a dual-stage strategy that combines signal-level onset detection and semantic-level coherence to align asynchronous radar and audio streams. Unlike liveness detection, which only confirms whether speech occurred, VoxAnchor verifies what was spoken through word-level content consistency, exposing localized edits that preserve identity and global authenticity cues. Extensive evaluations show that VoxAnchor achieves robust, fine-grained detection across diverse forgeries (editing, splicing, replay, deepfake) and conditions, with an overall EER of 0.017, low latency, and modest computational cost.

cs.HC↗

arXiv2026

RAGent: Physics-Aware Agentic Reasoning for Training-Free mmWave Human Activity Recognition

Millimeter-wave (mmWave) radar enables privacy-preserving human activity recognition (HAR), yet real-world deployment remains hindered by costly annotation and poor transferability under domain shift. Although prior efforts partially alleviate these challenges, most still require retraining or adaptation for each new deployment setting. This keeps mmWave HAR in a repeated collect-tune-redeploy cycle, making scalable real-world deployment difficult. In this paper, we present RAGent, a deployment-time training-free framework for mmWave HAR that reformulates recognition as evidence-grounded inference over reusable radar knowledge rather than deployment-specific model optimization. Offline, RAGent constructs a reusable radar knowledge base through constrained cross-modal supervision, where a Vision-Language Model (VLM) transfers activity semantics from synchronized videos to paired radar segments without manual radar annotation. At deployment time, RAGent recognizes activities from radar alone by retrieving physically comparable precedents in an explicit kinematic space and resolving the final label through structured multi-role reasoning. The reasoning protocol is further refined offline through zero-gradient self-evolution. Extensive experiments on a self-collected dataset show that RAGent achieves 93.39% accuracy without per-domain retraining or target-domain adaptation, while generalizing robustly across domains.

cs.HC↗

arXiv2025

RF Sensing Security and Malicious Exploitation: A Comprehensive Survey

Radio Frequency (RF) sensing technologies have experienced significant growth due to the widespread adoption of RF devices and the Internet of Things (IoT). These technologies enable numerous applications across healthcare, smart homes, industrial automation, and human-computer interaction. However, the non-intrusive and ubiquitous nature of RF sensing - combined with its environmental sensitivity and data dependency - makes these systems inherently vulnerable not only as attack targets, but also as powerful attack vectors. This survey presents a comprehensive analysis of RF sensing security, covering both system-level vulnerabilities - such as signal spoofing, adversarial perturbations, and model poisoning - and the misuse of sensing capabilities for attacks like cross-boundary surveillance, side-channel inference, and semantic privacy breaches. We propose unified threat models to structure these attack vectors and further conduct task-specific vulnerability assessments across key RF sensing applications, identifying their unique attack surfaces and risk profiles. In addition, we systematically review defense strategies across system layers and threat-specific scenarios, incorporating both active and passive paradigms to provide a structured and practical view of protection mechanisms. Compared to prior surveys, our work distinguishes itself by offering a multi-dimensional classification framework based on task type, threat vector, and sensing modality, and by providing fine-grained, scenario-driven analysis that bridges theoretical models and real-world implications. This survey aims to serve as a comprehensive reference for researchers and practitioners seeking to understand, evaluate, and secure the evolving landscape of RF sensing technologies.

cs.HC↗

arXiv2024

iRadar: Synthesizing Millimeter-Waves from Wearable Inertial Inputs for Human Gesture Sensing

Millimeter-wave (mmWave) radar-based gesture recognition is gaining attention as a key technology to enable intuitive human-machine interaction. Nevertheless, the significant challenge lies in obtaining large-scale, high-quality mmWave gesture datasets. To tackle this problem, we present iRadar, a novel cross-modal gesture recognition framework that employs Inertial Measurement Unit (IMU) data to synthesize the radar signals generated by the corresponding gestures. The key idea is to exploit the IMU signals, which are commonly available in contemporary wearable devices, to synthesize the radar signals that would be produced if the same gesture was performed in front of a mmWave radar. However, several technical obstacles must be overcome due to the differences between mmWave and IMU signals, the noisy gesture sensing of mmWave radar, and the dynamics of human gestures. Firstly, we develop a method for processing IMU and mmWave data to extract critical gesture features. Secondly, we propose a diffusion-based IMU-to-radar translation model that accurately transforms IMU data into mmWave data. Lastly, we devise a novel transformer model to enhance gesture recognition performance. We thoroughly evaluate iRadar, involving 18 gestures and 30 subjects in three scenarios, using five wearable devices. Experimental results demonstrate that iRadar consistently achieves 99.82% Top-3 accuracy across diverse scenarios.

cs.HC↗

arXiv2024

EmbedGenius: Towards Automated Software Development for Generic Embedded IoT Systems

Embedded IoT system development is crucial for enabling seamless connectivity and functionality across a wide range of applications. However, such a complex process requires cross-domain knowledge of hardware and software and hence often necessitates direct developer involvement, making it labor-intensive, time-consuming, and error-prone. To address this challenge, this paper introduces EmbedGenius, the first fully automated software development platform for general-purpose embedded IoT systems. The key idea is to leverage the reasoning ability of Large Language Models (LLMs) and embedded system expertise to automate the hardware-in-the-loop development process. The main methods include a component-aware library resolution method for addressing hardware dependencies, a library knowledge generation method that injects utility domain knowledge into LLMs, and an auto-programming method that ensures successful deployment. We evaluate EmbedGenius's performance across 71 modules and four mainstream embedded development platforms with over 350 IoT tasks. Experimental results show that EmbedGenius can generate codes with an accuracy of 95.7% and complete tasks with a success rate of 86.5%, surpassing human-in-the-loop baselines by 15.6%--37.7% and 25.5%--53.4%, respectively. We also show EmbedGenius's potential through case studies in environmental monitoring and remote control systems development.

cs.SE↗

arXiv2024

Towards Battery-Free Wireless Sensing via Radio-Frequency Energy Harvesting

Diverse Wi-Fi-based wireless applications have been proposed, ranging from daily activity recognition to vital sign monitoring. Despite their remarkable sensing accuracy, the high energy consumption and the requirement for customized hardware modification hinder the wide deployment of the existing sensing solutions. In this paper, we propose REHSense, an energy-efficient wireless sensing solution based on Radio-Frequency (RF) energy harvesting. Instead of relying on a power-hungry Wi-Fi receiver, REHSense leverages an RF energy harvester as the sensor and utilizes the voltage signals harvested from the ambient Wi-Fi signals to enable simultaneous context sensing and energy harvesting. We design and implement REHSense using a commercial-off-the-shelf (COTS) RF energy harvester. Extensive evaluation of three fine-grained wireless sensing tasks (i.e., respiration monitoring, human activity, and hand gesture recognition) shows that REHSense can achieve comparable sensing accuracy with conventional Wi-Fi-based solutions while adapting to different sensing environments, reducing the power consumption by 98.7% and harvesting up to 4.5mW of power from RF energy.

cs.NI↗