arXiv subjects

Ming Yang

Publications and source records attributed to Ming Yang.

At least 271 records · Page 15Linked to original sources

arXiv2021

BOSS: A Blockchain Off-State Sharing System

Blockchain has been applied to data sharing to ensure the integrity of data and chain of custody. Sharing big data such as large biomedical data files is a challenge to blockchain systems since the ledger is not designed to maintain big files, access control is an issue, and users may be dishonest. We call big data such as big files stored outside of a ledger that includes the blockchain and world state at a blockchain node as "off-state" and propose an off-state sharing protocol for a blockchain system to share big data between pairs of nodes. In our protocol, only encrypted files are transferred. The cryptographic key is stored in the world state in a secure way and can be accessed only by authorized parties. A receiver has to request the corresponding cryptographic key from the sender to decrypt such encrypted files. All requests are run through transactions to establish reliable chain of custody. We design and implement a prototypical blockchain off-state sharing system, BOSS, with Hyperledger Fabric. Extensive experiments were performed to validate the feasibility and performance of BOSS.

cs.CR↗

arXiv2021

The Measurement of Dynamic Tidal Contribution to Apsidal Motion in Heartbeat Star KIC 4544587

Apsidal motion is a gradual shift in the position of periastron. The impact of dynamic tides on apsidal motion has long been debated, because the contribution could not be quantified due to the lack of high quality observations. KIC 4544587 with tidally excited oscillations has been observed by \textit{Kepler} high-precision photometric data based on long time baseline and short-cadence schema. In this paper, we compute the rate of apsidal motion that arises from the dynamic tides as $19.05\pm 1.70$ mrad yr$^{-1}$ via tracking the orbital phase shifts of tidally excited oscillations. We also calculate the procession rate of the orbit due to the Newtonian and general relativistic contribution as $21.49 \pm 2.8$ and $2.4 \pm 0.06$ mrad yr$^{-1}$, respectively. The sum of these three factors is in excellent agreement with the total observational rate of apsidal motion $42.97 \pm 0.18$ mrad yr$^{-1}$ measured by eclipse timing variations. The tidal effect accounts for about 44\% of the overall observed apsidal motion and is comparable to that of the Newtonian term. Dynamic tides have a significant contribution to the apsidal motion. The analysis method mentioned in this paper presents an alternative approach to measuring the contribution of the dynamic tides quantitatively.

astro-ph.SR↗

arXiv2021

Structure dependent and strain tunable magnetic ordering in ultrathin chromium telluride

Two-dimensional (2D) chromium tellurides have attracted considerable research interest for their high Curie temperatures. Their magnetic properties have been found diverse in various experiments, the understanding of which however remains limited. In this work, we report that the magnetic ordering of ultrathin chromium tellurides is structure dependent and can be tuned by external strain. Based on first-principles calculations and Monte Carlo simulations, we show long-range stable magnetism with high and low Curie temperature, and short-range magnetism in 2D Cr5Te8, CrTe2, and Cr2Te3 layers, respectively. We further find that ferromagnetic-to-antiferromagnetic transition can be realized by 2% compressive strain for CrTe2 and 2% tensile strain for Cr2Te3, and their magnetic easy axis is tuned from out-of-plane to in-plane by the medium tensile and compressive strain. This strain dependent magnetic coupling is found to be related to Cr-Cr direct exchange and the change of magnetic anisotropy is understood by the atom and orbital resolved magnetic anisotropy energy and second order perturbation theory. Our results reveal the important roles of the structure and strain in determining the magnetic ordering in 2D chromium telluride, shedding light on understanding of the diverse magnetic properties observed in experiments.

cond-mat.mtrl-sci↗

arXiv2021

Few-shot Unsupervised Domain Adaptation with Image-to-class Sparse Similarity Encoding

This paper investigates a valuable setting called few-shot unsupervised domain adaptation (FS-UDA), which has not been sufficiently studied in the literature. In this setting, the source domain data are labelled, but with few-shot per category, while the target domain data are unlabelled. To address the FS-UDA setting, we develop a general UDA model to solve the following two key issues: the few-shot labeled data per category and the domain adaptation between support and query sets. Our model is general in that once trained it will be able to be applied to various FS-UDA tasks from the same source and target domains. Inspired by the recent local descriptor based few-shot learning (FSL), our general UDA model is fully built upon local descriptors (LDs) for image classification and domain adaptation. By proposing a novel concept called similarity patterns (SPs), our model not only effectively considers the spatial relationship of LDs that was ignored in previous FSL methods, but also makes the learned image similarity better serve the required domain alignment. Specifically, we propose a novel IMage-to-class sparse Similarity Encoding (IMSE) method. It learns SPs to extract the local discriminative information for classification and meanwhile aligns the covariance matrix of the SPs for domain adaptation. Also, domain adversarial training and multi-scale local feature matching are performed upon LDs. Extensive experiments conducted on a multi-domain benchmark dataset DomainNet demonstrates the state-of-the-art performance of our IMSE for the novel setting of FS-UDA. In addition, for FSL, our IMSE can also show better performance than most of recent FSL methods on miniImageNet.

cs.CV↗

arXiv2021

Searching Water Megamasers By Using Mid-infrared Spectroscopy (I): Possible Mid-infrared Indicators

Water megamasers at 22 GHz with a gas disk configuration in galaxies provide the most precise measurements of supermassive black hole masses, as well as independent constraints on the Hubble constant in the nearby universe. The existence of other maser types, such as jet or outflow masers, represents another tracer for AGN science. However, the detection rate of water megamasers in galaxies is extremely low. Over 40 years, only $\sim$ 160 galaxies are found to harbour maser emission, and $\sim$ 30\% of them show features in their maser emission that indicate a disk-like geometry. Therefore, increasing the detection rate of masers is a crucial task to allow expanding on maser studies. We present a comparison of mid-infrared spectroscopic data between a maser galaxy sample and a Seyfert 2 control sample. We find that maser galaxies show significant peculiarities in their mid-infrared spectra: (1) Maser galaxies tend to present stronger silicate absorption at $τ$ 9.7 $μ$m than the control sample, (2) PAH 11.3 $μ$m emission in maser galaxies is much weaker than in the control sample, (3) spectral indices at 20-30 $μ$m are steeper in maser galaxies than in the control sample and tend to be mid-infrared enhanced population. We conclude that there may be good indicators in mid-infrared and far-infrared which could differentiate maser and non-maser Seyfert 2 galaxies. Upcoming infrared facilities, such as the James Webb Space Telescope, may be able to exploit these and other useful criteria and tracers for water megamaser observations.

astro-ph.GA↗

arXiv2021

Magnetic-field-induced robust zero Hall plateau state in MnBi$_2$Te$_4$ Chern insulator

The intrinsic antiferromagnetic topological insulator MnBi2Te4 provides an ideal platform for exploring exotic topological quantum phenomena. Recently, the Chern insulator and axion insulator phases have been realized in few-layer MnBi2Te4 devices at low magnetic field regime. However, the fate of MnBi2Te4 in high magnetic field has never been explored in experiment. In this work, we report transport studies of exfoliated MnBi2Te4 flakes in pulsed magnetic fields up to 61.5 T. In the high-field limit, the Chern insulator phase with Chern number C = -1 evolves into a robust zero Hall resistance plateau state. Nonlocal transport measurements and theoretical calculations demonstrate that the charge transport in the zero Hall plateau state is conducted by two counter-propagating edge states that arise from the combined effects of Landau levels and large Zeeman effect in strong magnetic fields. Our result demonstrates the intricate interplay among intrinsic magnetic order, external magnetic field, and nontrivial band topology in MnBi2Te4.

cond-mat.mes-hall↗

arXiv2021

Superconductivity in Layered van der Waals Hydrogenated Germanene at High Pressure

Structural and superconducting transitions of layered van der Waals (vdW) hydrogenated germanene (GeH) were observed under high-pressure compression and decompression processes. GeH possesses a superconducting transition at critical temperature (Tc) of 5.41 K at 8.39 GPa. A crystalline to amorphous transition occurs at 16.80 GPa while superconductivity remains. An abnormally increased Tc up to 6.1 K has been observed in the decompression process while the GeH remained amorphous. Thorough in-situ high-pressure synchrotron X-ray diffraction and in-situ high-pressure Raman spectroscopy with the density functional theory simulations suggest that the superconductivity of GeH should be attributed to the increased density of states at the Fermi level as well as the enhanced electron-phonon coupling effect under high pressure. The decompression-driven superconductivity enhancement arises from pressure-induced phonon softening related to an in-plane Ge-Ge phonon mode. As an amorphous metal hydride superconductor, GeH provides a platform to study amorphous hydride superconductivity in layered vdW materials.

cond-mat.supr-con↗

arXiv2021

Hidden Frustration in Double-Perovskite CaFeTi$_2$O$_6$

We study the magnetic properties of CaFeTi$_2$O$_6$ (CFTO) by high-field magnetization and specific heat measurements. While the magnetic susceptibility data yield a vanishingly small Curie-Weiss temperature, the magnetic moments are not fully polarized in magnetic field up to 60 T, which reveals a large spin exchange energy scale. Yet, the system shows no long range magnetic order but a spin-glass-like state below 5.5 K in zero field, indicating strong magnetic frustration in this system. Applying magnetic field gradually suppresses the spin-glass-like state and gives rise to a potential quantum spin liquid state whose low-temperature specific heat exhibits a $T^{1.6}$ power-law. Crucially, conventional mechanisms for frustration do not apply to this system as it possesses neither apparent geometrical frustration nor exchange frustration. We suggest that the orbital modulation of exchange interaction is likely the source of hidden frustration in CFTO, and its full characterization may open a new route in the quest for quantum spin liquids.

cond-mat.str-el↗

arXiv2021

Back-tracing Representative Points for Voting-based 3D Object Detection in Point Clouds

3D object detection in point clouds is a challenging vision task that benefits various applications for understanding the 3D visual world. Lots of recent research focuses on how to exploit end-to-end trainable Hough voting for generating object proposals. However, the current voting strategy can only receive partial votes from the surfaces of potential objects together with severe outlier votes from the cluttered backgrounds, which hampers full utilization of the information from the input point clouds. Inspired by the back-tracing strategy in the conventional Hough voting methods, in this work, we introduce a new 3D object detection method, named as Back-tracing Representative Points Network (BRNet), which generatively back-traces the representative points from the vote centers and also revisits complementary seed points around these generated points, so as to better capture the fine local structural features surrounding the potential objects from the raw point clouds. Therefore, this bottom-up and then top-down strategy in our BRNet enforces mutual consistency between the predicted vote centers and the raw surface points and thus achieves more reliable and flexible object localization and class prediction results. Our BRNet is simple but effective, which significantly outperforms the state-of-the-art methods on two large-scale point cloud datasets, ScanNet V2 (+7.5% in terms of mAP@0.50) and SUN RGB-D (+4.7% in terms of mAP@0.50), while it is still lightweight and efficient. Code will be available at https://github.com/cheng052/BRNet.

cs.CV↗

arXiv2021

Track to Detect and Segment: An Online Multi-Object Tracker

Most online multi-object trackers perform object detection stand-alone in a neural net without any input from tracking. In this paper, we present a new online joint detection and tracking model, TraDeS (TRAck to DEtect and Segment), exploiting tracking clues to assist detection end-to-end. TraDeS infers object tracking offset by a cost volume, which is used to propagate previous object features for improving current object detection and segmentation. Effectiveness and superiority of TraDeS are shown on 4 datasets, including MOT (2D tracking), nuScenes (3D tracking), MOTS and Youtube-VIS (instance segmentation tracking). Project page: https://jialianwu.com/projects/TraDeS.html.

cs.CV↗

arXiv2021

Enhancement of Superconductivity Linked with Linear-in-Temperature/Field Resistivity in Ion-Gated FeSe Films

Iron selenide (FeSe) - the structurally simplest iron-based superconductor, has attracted tremendous interest in the past years. While the transition temperature (Tc) of bulk FeSe is $\sim$ 8 K, it can be significantly enhanced to 40 - 50 K by various ways of electron doping. However, the underlying physics for such great enhancement of Tc and so the Cooper pairing mechanism still remain puzzles. Here, we report a systematic study of the superconducting- and normal-state properties of FeSe films via ionic liquid gating. With fine tuning, Tc evolves continuously from below 10 K to above 40 K; in situ two-coil mutual inductance measurements unambiguously confirm the gating is a uniform bulk effect. Close to Tc, the normal-state resistivity shows a linear dependence on temperature and the linearity extends to lower temperatures with the superconductivity suppressed by high magnetic fields. At high fields, the normal-state magnetoresistance exhibits a linear-in-field dependence and obeys a simple scaling relation between applied field and temperature. Consistent behaviors are observed for different-Tc states throughout the gating process, suggesting the pairing mechanism very likely remains the same from low- to high-Tc state. Importantly, the coefficient of the linear-in-temperature resistivity is positively correlated with Tc, similarly to the observations in cuprates, Bechgaard salts and iron pnictide superconductors. Our study points to a short-range antiferromagnetic exchange interaction mediated pairing mechanism in FeSe.

cond-mat.supr-con↗

arXiv2021

Resolving the Intrinsic Bandgap and Edge Effect of BiI3 Film Epitaxially Grown on Graphene

Two-dimensional materials with layered structures, appropriate bandgap, and high carrier mobilities have gathered tremendous interests due to their potential applications in optoelectronic and photovoltaic devices. Here, we report the growth of BiI3 thin film with controllable atomic thickness on graphene-terminated 6H-SiC(0001) substrate by molecular beam epitaxy (MBE) method. The growth kinetic processes and crystalline properties of the BiI3 film are studied by scanning tunneling microscopy (STM). The scanning tunneling spectroscopy (STS) reveals a bandgap of 2.8 eV for monolayer BiI3 with a weak dependence on film thickness for few-layer BiI3, which greatly exceeds the previous reported values identified by macroscopic optical measurements. This discrepancy originates from the edge effect of BiI3 that renders the bandgap downshift to 1.5 - 1.6 eV, as identified by the STS curves and the further confirmed by density functional theory (DFT) calculations. Our work provides a method to fabricate high-quality monolayer BiI3 film and resolves its intrinsic bandgap as well as the edge effect on reduction of bandgap, benefitting not only to fundamental researches but also to nanoelectronic and optoelectronic applications.

cond-mat.mtrl-sci↗

arXiv2021

Epitaxial Growth of Quasi-One-Dimensional Bismuth-Halide Chains with Topological Non-Trivial Edge States

Quantum spin Hall insulators have one-dimensional (1D) spin-momentum locked topological edge states (ES) inside the bulk band gap, which can serve as dissipationless channels for the practical applications in low consumption electronics and high performance spintronics. However, the clean and atomically sharp ES serving as ideal 1D conducting channels are still lack. Here, we report the formation of the quasi-1D Bi4I4 nanoribbons on the surface of Bi(111) with the support of the graphene-terminated 6H-SiC(0001) and the direct observations of the topological ES at the step edge by scanning tunneling microscopy and spectroscopic-imaging results. The ES reside surround the edge of Bi4I4 nanoribbons and exhibits remarkable robustness against non time reversal symmetry perturbations. The theoretical simulations verify the topological non-trivial character of 1D ES, which is retained after considering the presence of the underlying Bi(111). Our study supports the existence of topological ES in Bi4I4 nanoribbons, paving the way to engineer the novel topological features by using the nanoribbons as the 1D building block.

cond-mat.mtrl-sci↗

arXiv2021

Red supergiants in M31 and M33 II. The Mass Loss Rate

Mass loss is an important activity for red supergiants (RSGs) which can influence their evolution and final fate. Previous estimations of mass loss rates (MLRs) of RSGs exhibit significant dispersion due to the difference in method and the incompleteness of sample. With the improved quality and depth of the surveys including the UKIRT/WFCAM observation in near infrared, LGGS and PS1 in optical, a rather complete sample of RSGs is identified in M31 and M33 according to their brightness and colors. For about 2000 objects in either galaxy from this ever largest sample, the MLR is derived by fitting the observational optical-to-mid infrared spectral energy distribution (SED) with the DUSTY code of a 1-D dust radiative transfer model. The average MLR of RSGs is found to be around $2.0\times10^{-5}{\text{M}_\odot}/\text{yr}$ with a gas-to-dust ratio of 100, which yields a total contribution to the interstellar dust by RSGs of about $1.1\times10^{-3}{\text{M}_\odot}/\text{yr}$ in M31 and $6.0 \times10^{-4}{\text{M}_\odot}/\text{yr}$ in M33, a non-negligible source in comparison with evolved low-mass stars. The MLRs are divided into three types by the dust properties, i.e. amorphous silicate, amorphous carbon and optically thin, and the relations of MLR with stellar parameters, infrared flux and colors are discussed and compared with previous works for the silicate and carbon dust group respectively.

astro-ph.SR↗

arXiv2021

Room temperature ferromagnetism of monolayer chromium telluride with perpendicular magnetic anisotropy

The realization of long-range magnetic ordering in two-dimensional (2D) systems can potentially revolutionize next-generation information technology. Here, we report the successful fabrication of crystalline Cr3Te4 monolayers with room temperature ferromagnetism. Using molecular beam epitaxy, the growth of 2D Cr3Te4 films with monolayer thickness is demonstrated at low substrate temperatures (~100C), compatible with Si CMOS technology. X-ray magnetic circular dichroism measurements reveal a Curie temperature (Tc) of ~344 K for the Cr3Te4 monolayer with an out-of-plane magnetic easy axis, which decreases to ~240 K for the thicker film (~ 7 nm) with an in-plane easy axis. The enhancement of ferromagnetic coupling and the magnetic anisotropy transition is ascribed to interfacial effects, in particular the orbital overlap at the monolayer Cr3Te4/graphite interface, supported by density-functional theory calculations. This work sheds light on the low-temperature scalable growth of 2D nonlayered materials with room temperature ferromagnetism for new magnetic and spintronic devices.

cond-mat.mtrl-sci↗

arXiv2021

Superflares, chromospheric activities and photometric variabilities of solar-type stars from the second-year observation of TESS and spectra of LAMOST

In this work, 1272 superflares on 311 stars are collected from 22,539 solar-type stars from the second-year observation of Transiting Exoplanet Survey Satellite (TESS), which almost covered the northern hemisphere of the sky. Three superflare stars contain hot Jupiter candidates or ultrashort-period planet candidates. We obtain $γ= -1.76\pm 0.11$ of the correlation between flare frequency and flare energy ($dN/dE\propto E^{-γ}$) for all superflares and get $β=0.42\pm0.01$ of the correlation between superflare duration and energy ($T_{\text {duration }} \propto E^β$), which supports that a similar mechanism is shared by stellar superflares and solar flares. Stellar photometric variability ($R_{\rm var}$) is estimated for all solar-type stars, and the relation of $E\propto {R_{\rm var}}^{3/2}$ is included. An indicator of chromospheric activity ($S$-index) is obtained by using data from the Large Sky Area Multi-Object Fiber Spectroscopic Telescope (LAMOST) for 7454 solar-type stars. Distributions of these two properties indicate that the Sun is generally less active than superflare stars. We find that saturation-like feature of $R_{\rm var}\sim 0.1$ may be the reason for superflare energy saturating around $10^{36}$ erg. Object TIC 93277807 was captured by the TESS first-year mission and generated the most energetic superflare. This superflare is valuable and unique that can be treated as an extreme event, which may be generated by different mechanisms rather than other superflares.

astro-ph.SR↗

arXiv2021

Evolved Massive Stars at Low-metallicity IV. Using 1.6 $μ$m "H-bump" to identify red supergiant stars: a case study of NGC 6822

We present a case study of using a novel method to identify red supergiant (RSG) candidates in NGC 6822, based on their 1.6 $μ$m "H-bump". We collected 32 bands of photometric data for NGC 6822 ranging from optical to MIR. By using the theoretical spectra from MARCS, we demonstrate that there is a prominent difference around 1.6 $μ$m ("H-bump") between low-surface-gravity (LSG) and high-surface-gravity (HSG) targets. Taking advantage of this feature, we identify efficient color-color diagrams (CCDs) of rzH and rzK to separate HSG and LSG targets from crossmatching of optical and NIR data. Moreover, synthetic photometry from ATLAS9 also give similar results. Further separating RSG candidates from the rest of the LSG candidates is done by using semi-empirical criteria on NIR CMDs and resulted in 323 RSG candidates. Meanwhile, the simulation of foreground stars from Besançon models also indicates that our selection criteria is largely free from the contamination of Galactic giants. In addition to the "H-bump" method, we also use the traditional BVR method as a comparison and/or supplement, by applying a slightly aggressive cut to select as much as possible RSG candidates (358 targets). Furthermore, the Gaia astrometric solution is used to constrain the sample, where 181 and 193 targets were selected from the "H-bump" and BVR method, respectively. The percentages of selected targets in both methods are similar as $\sim$60\%, indicating the comparable accuracy of the two methods. In total, there are 234 RSG candidates after combining targets from both methods with 140 ($\sim$60\%) of them in common. The final RSG candidates are in the expected locations on the MIR CMDs, while the spatial distribution is also coincident with the FUV-selected star formation regions, suggesting the selection is reasonable and reliable.

astro-ph.SR↗

arXiv2021

Deep View Synthesis via Self-Consistent Generative Network

View synthesis aims to produce unseen views from a set of views captured by two or more cameras at different positions. This task is non-trivial since it is hard to conduct pixel-level matching among different views. To address this issue, most existing methods seek to exploit the geometric information to match pixels. However, when the distinct cameras have a large baseline (i.e., far away from each other), severe geometry distortion issues would occur and the geometric information may fail to provide useful guidance, resulting in very blurry synthesized images. To address the above issues, in this paper, we propose a novel deep generative model, called Self-Consistent Generative Network (SCGN), which synthesizes novel views from the given input views without explicitly exploiting the geometric information. The proposed SCGN model consists of two main components, i.e., a View Synthesis Network (VSN) and a View Decomposition Network (VDN), both employing an Encoder-Decoder structure. Here, the VDN seeks to reconstruct input views from the synthesized novel view to preserve the consistency of view synthesis. Thanks to VDN, SCGN is able to synthesize novel views without using any geometric rectification before encoding, making it easier for both training and applications. Finally, adversarial loss is introduced to improve the photo-realism of novel views. Both qualitative and quantitative comparisons against several state-of-the-art methods on two benchmark tasks demonstrated the superiority of our approach.

cs.CV↗