arXiv subjects

Ming Teng

Publications and source records attributed to Ming Teng.

6 recordsLinked to original sources

arXiv2026

Impact of Wind Direction on Flow and Turbulent Statistics Over a Realistic Urban Area: A Large-Eddy Simulation Study

Effects of wind direction in realistic urban canopies remain difficult to characterize systematically because local flow patterns, building-height variability, and turbulent statistics within a realistic urban canopy may respond differently to changes in the approaching wind. To investigate these multi-scale directional impacts, we conducted high-resolution large-eddy simulations of the atmospheric boundary layer over the Zona Universitaria Pedralbes district in Barcelona. The computational meshes employ fourth-order spectral elements, yielding pedestrian-level resolutions below 1 m and resulting in approximately 5.0e8 degrees of freedom. Sixteen wind directions uniformly distributed over 360deg are simulated to capture the full directional response of the urban fabric.

physics.flu-dyn↗

arXiv2025

Impact of Wind Direction on Flow Over a Realistic Urban Area: A Large-Eddy Simulation Study

We conducted high-resolution large-eddy simulations over a real urban district in Barcelona to examine the impact of wind direction on near-ground flow. The computational mesh resolves over 500 million degrees of freedom, with a spatial resolution on the order of 1 m at pedestrian level. This allows a detailed analysis of mean velocity and turbulence patterns within the canopy layer. Although instantaneous flow fields differ significantly between cases, double-averaged profiles of velocity and turbulence intensity remain remarkably consistent across all wind directions. The results reveal a shear-driven mixing layer below the average building height and turbulence maxima near the tallest buildings, highlighting the influence of urban morphology on the development of flow and turbulence.

physics.flu-dyn↗

arXiv2025

Atmospheric boundary layer over urban roughness: validation of large-eddy simulation

The study presents wall-modeled large-eddy simulations (LES) characterizing the flow features of a neutral atmospheric boundary layer over two urban-like roughness geometries: an array of three-dimensional square prisms and the 'Michel-Stadt' geometry model. The former is an arrangement of idealized building blocks. The latter mimics a typical central European urban geometry. In both cases, the incident wind angle is $0^\circ$. The Reynolds number for each case are $Re_H = 5.0 \times 10^6$ and $8.0 \times 10^6$, respectively ($Re_H = U_{ref} H/\nu$ with $U_{ref}$ and $H$ denoting the reference velocity and building height, respectively, and $\nu$ the kinematic viscosity). The LES employs a high-order, low-dissipation numerical scheme with a spatial resolution of 0.75m within the urban canopy. An online precursor simulation ensures realistic turbulent inflow conditions. The simulations performed successfully captures mean-velocity profiles, wake regions, and rooftop acceleration, with excellent agreement in the streamwise velocity component. While turbulent kinetic energy is well predicted at most locations, minor discrepancies are observed near the ground. The analysis of scatter plots and validation metrics (FAC2 and hit rate) shows that LES predictions outperform the standard criteria commonly used in urban flow simulations, while spectral analysis verifies that LES accurately resolves the turbulent energy cascade over approximately two frequency decades. The Kolmogorov -2/3 slope in the pre-multiplied spectra has been well reproduced below and above the urban canopy. These findings reinforce the importance of spectral analysis in LES validation and highlight the potential of high-order methods for LES of urban flows.

physics.flu-dyn↗

arXiv2018

Time Series Analysis of fMRI Data: Spatial Modelling and Bayesian Computation

Time series analysis of fMRI data is an important area of medical statistics for neuroimaging data. The neuroimaging community has embraced mean-field variational Bayes (VB) approximations, which are implemented in Statistical Parametric Mapping (SPM) software. While computationally efficient, the quality of VB approximations remains unclear even though they are commonly used in the analysis of neuroimaging data. For reliable statistical inference, it is important that these approximations be accurate and that users understand the scenarios under which they may not be accurate. We consider this issue for a particular model that includes spatially-varying coefficients. To examine the accuracy of the VB approximation we derive Hamiltonian Monte Carlo (HMC) for this model and conduct simulation studies to compare its performance with VB. As expected we find that the computation time required for VB is considerably less than that for HMC. In settings involving a high or moderate signal-to-noise ratio (SNR) we find that the two approaches produce very similar results suggesting that the VB approximation is useful in this setting. On the other hand, when one considers a low SNR, substantial differences are found, suggesting that the approximation may not be accurate in such cases and we demonstrate that VB produces Bayes estimators with larger mean squared error (MSE). A real application related to face perception is also carried out. Overall, our work clarifies the usefulness of VB for the spatiotemporal analysis of fMRI data, while also pointing out the limitation of VB when the SNR is low and the utility of HMC in this case.

stat.CO↗

arXiv2017

Bayesian Analysis of fMRI data with Spatially-Varying Autoregressive Orders

Statistical modeling of fMRI data is challenging as the data are both spatially and temporally correlated. Spatially, measurements are taken at thousands of contiguous regions, called voxels, and temporally measurements are taken at hundreds of time points at each voxel. Recent advances in Bayesian hierarchical modeling have addressed the challenges of spatiotemproal structure in fMRI data with models incorporating both spatial and temporal priors for signal and noise. While there has been extensive research on modeling the fMRI signal (i.e., the covolution of the experimental design with the functional choice for the hemodynamic response function) and its spatial variability, less attention has been paid to realistic modeling of the temporal dependence that typically exists within the fMRI noise, where a low order autoregressive process is typically adopted. Furthermore, the AR order is held constant across voxels (e.g. AR(1) at each voxel). Motivated by an event-related fMRI experiment, we propose a novel hierarchical Bayesian model with automatic selection of the autoregressive orders of the noise process that vary spatially over the brain. With simulation studies we show that our model has improved accuracy and apply it to our motivating example.

stat.CO↗

arXiv2017

Bayesian Computation for Log-Gaussian Cox Processes--A Comparative Analysis of Methods

The Log-Gaussian Cox Process is a commonly used model for the analysis of spatial point patterns. Fitting this model is difficult because of its doubly-stochastic property, i.e., it is an hierarchical combination of a Poisson process at the first level and a Gaussian Process at the second level. Different methods have been proposed to estimate such a process, including traditional likelihood-based approaches as well as Bayesian methods. We focus here on Bayesian methods and several approaches that have been considered for model fitting within this framework, including Hamiltonian Monte Carlo, the Integrated nested Laplace approximation, and Variational Bayes. We consider these approaches and make comparisons with respect to statistical and computational efficiency. These comparisons are made through several simulations studies as well as through applications examining both ecological data and neuroimaging data.

stat.CO↗