arXiv ScienceSearch

arXiv subjects

Ming Luo

Publications and source records attributed to Ming Luo.

12 recordsLinked to original sources

Westlake Scholar: AI-Enhanced Scholarly Discovery over an Institutional Repository

Institutional repositories (IRs) provide mature infrastructure for preserving and disseminating research outputs, but conventional record- and document-centric interfaces provide limited support for connecting deposited papers to related research and people. We present Westlake Scholar, an open-source, institution-grounded platform that adds four complementary artificial intelligence (AI) services to repository infrastructure: contextual paper reading, research-direction-guided paper discovery, publication-grounded expert discovery, and AI-generated research chronologies for scholars. The services draw on a shared institutional knowledge layer connecting approved publication records, paper content, and scholar--publication relationships. This allows the same paper to support contextual reading, cross-paper discovery, expert matching, and longitudinal views of scholarly work. Westlake Scholar provides an open and governable implementation of an institution-controlled AI layer that connects repository content, scholarly discovery, and researcher relationships while preserving provenance, human review, and institutional governance. A deployment at Westlake University, in operation since April 2026, demonstrates that the integrated system can operate in a live institutional setting.

cs.DL

How Task Structure Limits Multi-Agent Success: An Information-Theoretic Analysis

Multi-agent systems (MAS) were expected to overcome the limitation of single-agent systems (SAS) through collaboration. However, under typicality conditions on the task's constraint graph and bounded inter-agent communication, we prove that the success probability of a MAS is closely tied to the connectivity of task constraints, where each agent has limited information-processing capacity. Specifically, the success probability decays exponentially with an information bottleneck that emerges from partitioning the task's constraint graph among agents. We define this quantity as the \emph{minimum cut cost} $C_{\min}$ of the potential constraint graph of each task. This information-theoretic bound applies to both open systems with external feedback and closed systems without. We validate our theory on both synthetic experiments and real-world empirical data from SWE-bench submissions. From our framework, effective MAS design should incorporate task-inherent constraints alongside engineering optimization, and when $\Cmin$ is high, practitioners should restructure tasks rather than simply scaling agents or communication.

cs.IT

Versatile silicon integrated photonic processor: a reconfigurable solution for next-generation AI clusters

The Artificial Intelligence models pose serious challenges in intensive computing and high-bandwidth communication for conventional electronic circuit-based computing clusters. Silicon photonic technologies, owing to their high speed, low latency, large bandwidth, and complementary metal-oxide-semiconductor compatibility, have been widely implemented for data transfer and actively explored as photonic neural networks in AI clusters. However, current silicon photonic integrated chips lack adaptability for multifuncional use and hardware-software systematic coordination. Here, we develop a reconfigurable silicon photonic processor with $40$ programmable unit cells integrating over $160$ component, which, to the best of our knowledge, is the first to realize diverse functions with a chip for AI clusters, from computing acceleration and signal processing to network swtiching and secure encryption. Through a self-developed automated testing, compilation, and tuning framework to the processor without in-network monitoring photodetectors, we implement $4\times4$ dual-direction unitary and $3\times3$ uni-direction non-unitary matrix multiplications, neural networks for image recognition, micro-ring modulator wavelength locking, $4\times4$ photonic channel switching , and silicon photonic physical unclonable functions. This optoelectronic processing system, incorporating the photonic processor and its software stack, paves the way for both advanced photonic system-on-chip design and the construction of photo-electronic AI clusters.

physics.optics

A Novel Nonlinear Nonparametric Correlation Measurement With A Case Study on Surface Roughness in Finish Turning

Estimating the correlation coefficient has been a daunting work with the increasing complexity of dataset's pattern. One of the problems in manufacturing applications consists of the estimation of a critical process variable during a machining operation from directly measurable process variables. For example, the prediction of surface roughness of a workpiece during finish turning processes. In this paper, we did exhaustive study on the existing popular correlation coefficients: Pearson correlation coefficient, Spearman's rank correlation coefficient, Kendall's Tau correlation coefficient, Fechner correlation coefficient, and Nonlinear correlation coefficient. However, no one of them can capture all the nonlinear and linear correlations. So, we represent a universal non-linear non-parametric correlation measurement, g-correlation coefficient. Unlike other correlation measurements, g-correlation doesn't require assumptions and pick the dominating patterns of the dataset after examining all the major patterns no matter it is linear or nonlinear. Results of testing on both linearly correlated and non-linearly correlated dataset and comparison with the introduced correlation coefficients in literature show that g-correlation is robust on all the linearly correlated dataset and outperforms for some non-linearly correlated dataset. Results of the application of different correlation concepts to surface roughness assessment show that g-correlation has a central role among all standard concepts of correlation.

stat.ME

Design, Modeling, and Control of a Low-Cost and Rapid Response Soft-Growing Manipulator for Orchard Operations

Tree fruit growers around the world are facing labor shortages for critical operations, including harvest and pruning. There is a great interest in developing robotic solutions for these labor-intensive tasks, but current efforts have been prohibitively costly, slow, or require a reconfiguration of the orchard in order to function. In this paper, we introduce an alternative approach to robotics using a novel and low-cost soft-growing robotic platform. Our platform features the ability to extend up to 1.2 m linearly at a maximum speed of 0.27 m/s. The soft-growing robotic arm can operate with a terminal payload of up to 1.4 kg (4.4 N), more than sufficient for carrying an apple. This platform decouples linear and steering motions to simplify path planning and the controller design for targeting. We anticipate our platform being relatively simple to maintain compared to rigid robotic arms. Herein we also describe and experimentally verify the platform's kinematic model, including the prediction of the relationship between the steering angle and the angular positions of the three steering motors. Information from the model enables the position controller to guide the end effector to the targeted positions faster and with higher stability than without this information. Overall, our research show promise for using soft-growing robotic platforms in orchard operations.

cs.RO

Exploring the Potential of Integrated Optical Sensing and Communication (IOSAC) Systems with Si Waveguides for Future Networks

Advanced silicon photonic technologies enable integrated optical sensing and communication (IOSAC) in real time for the emerging application requirements of simultaneous sensing and communication for next-generation networks. Here, we propose and demonstrate the IOSAC system on the silicon nitride (SiN) photonics platform. The IOSAC devices based on microring resonators are capable of monitoring the variation of analytes, transmitting the information to the terminal along with the modulated optical signal in real-time, and replacing bulk optics in high-precision and high-speed applications. By directly integrating SiN ring resonators with optical communication networks, simultaneous sensing and optical communication are demonstrated by an optical signal transmission experimental system using especially filtering amplified spontaneous emission spectra. The refractive index (RI) sensing ring with a sensitivity of 172 nm/RIU, a figure of merit (FOM) of 1220, and a detection limit (DL) of 8.2*10-6 RIU is demonstrated. Simultaneously, the 1.25 Gbps optical on-off-keying (OOK) signal is transmitted at the concentration of different NaCl solutions, which indicates the bit-error-ratio (BER) decreases with the increase in concentration. The novel IOSAC technology shows the potential to realize high-performance simultaneous biosensing and communication in real time and further accelerate the development of IoT and 6G networks.

eess.SP

A Tip Mount for Transporting Sensors and Tools using Soft Growing Robots

Pneumatically operated soft growing robots that extend via tip eversion are well-suited for navigation in confined spaces. Adding the ability to interact with the environment using sensors and tools attached to the robot tip would greatly enhance the usefulness of these robots for exploration in the field. However, because the material at the tip of the robot body continually changes as the robot grows and retracts, it is challenging to keep sensors and tools attached to the robot tip during actuation and environment interaction. In this paper, we analyze previous designs for mounting to the tip of soft growing robots, and we present a novel device that successfully remains attached to the robot tip while providing a mounting point for sensors and tools. Our tip mount incorporates and builds on our previous work on a device to retract the robot without undesired buckling of its body. Using our tip mount, we demonstrate two new soft growing robot capabilities: (1) pulling on the environment while retracting, and (2) retrieving and delivering objects. Finally, we discuss the limitations of our design and opportunities for improvement in future soft growing robot tip mounts.

cs.RO

Human Interface for Teleoperated Object Manipulation with a Soft Growing Robot

Soft growing robots are proposed for use in applications such as complex manipulation tasks or navigation in disaster scenarios. Safe interaction and ease of production promote the usage of this technology, but soft robots can be challenging to teleoperate due to their unique degrees of freedom. In this paper, we propose a human-centered interface that allows users to teleoperate a soft growing robot for manipulation tasks using arm movements. A study was conducted to assess the intuitiveness of the interface and the performance of our soft robot, involving a pick-and-place manipulation task. The results show that users completed the task with a success rate of 97%, achieving placement errors below 2 cm on average. These results demonstrate that our body-movement-based interface is an effective method for control of a soft growing robot manipulator.

cs.RO

Human-centered Control of a Growing Soft Robot for Object Manipulation

We present a user-friendly interface to teleoperate a soft robot manipulator in a complex environment. Key components of the system include a manipulator with a grasping end-effector that grows via tip eversion, gesture-based control, and haptic display to the operator for feedback and guidance. In the initial work, the operator uses the soft robot to build a tower of blocks, and future works will extend this to shared autonomy scenarios in which the human operator and robot intelligence are both necessary for task completion.

cs.RO

Digital Domain Power Division Multiplexed Dual Polarization Coherent Optical OFDM Transmission

Capacity is the eternal pursuit for communication systems due to the overwhelming demand of bandwidth hungry applications. As the backbone infrastructure of modern communication networks, the optical fiber transmission system undergoes a significant capacity growth over decades by exploiting available physical dimensions (time, frequency, quadrature, polarization and space) of the optical carrier for multiplexing. For each dimension, stringent orthogonality must be guaranteed for perfect separation of independent multiplexed signals. To catch up with the ever-increasing capacity requirement, it is therefore interesting and important to develop new multiplexing methodologies relaxing the orthogonal constraint thus achieving better spectral efficiency and more flexibility of frequency reuse. Inspired by the idea of non-orthogonal multiple access (NOMA) scheme, here we propose a digital domain power division multiplexed (PDM) transmission technology which is fully compatible with current dual polarization (DP) coherent optical communication system. The coherent optical orthogonal frequency division multiplexing (CO-OFDM) modulation has been employed owing to its great superiority on high spectral efficiency, flexible coding, ease of channel estimation and robustness against fiber dispersion. And a PDM-DP-CO-OFDM has been theoretically and experimentally demonstrated with 100Gb/s wavelength division multiplexing (WDM) transmission over 1440km standard single mode fibers (SSMFs). Two baseband quadrature phase shift keying (QPSK) OFDM signals are overlaid together with different power levels. After IQ modulation, polarization multiplexing and long distance fiber transmission, the PDM-DP-CO-OFDM signal has been successfully recovered in the typical polarization diversity coherent receiver by successive interference cancellation (SIC) algorithm.

cs.IT

Feedback Induced Death in Coupled Oscillators

We investigate oscillation death in systems of coupled nonlinear oscillators with feedback loop. We find that feedback results in oscillation death both in small sets or large ensembles. More importantly, the death zone in parameter space is significantly enlarged and oscillation death could occur even in coupled identical oscillators in the presence of feedback. We find that there are two different ways to oscillation death, namely desynchronization and completely synchronization induced oscillation death. Feedback induced oscillation death may be used to suppress unexpected oscillations, e.g., in chaotic laser arrays.

nlin.AO

A top-down approach for desynchronization in an ensemble of coupled oscillators

A universal approach is proposed for suppression of collective synchrony in a large population of interacting rhythmic units. We demonstrate that provided that the internal coupling is weak, stabilization of overall oscillations with vanishing stimulation leads to desynchronization in a large ensemble of coupled oscillators, without altering significantly the essential nature of each constituent oscillator. We expect our findings to be a starting point for the issue of destroying undesired synchronization, e. g. desynchronization techniques for deep brain stimulation for neurological diseases characterized by pathological neural synchronization.

nlin.AO