arXiv Science⌕ Search

arXiv subjects

Minchen Li

Publications and source records attributed to Minchen Li.

At least 19 recordsLinked to original sources

Physics-Driven Extraction of Dynamic Fluid Asset from Monocular Video with Generative 3DGS

Existing methods for dynamic 3D scene synthesis from video rely on per-frame deformation fields optimized through pixel-level reconstruction losses. While effective for closed systems such as elastic solids, these approaches face challenges with open systems like fluids where material continuously enters and exits the scene, topology changes freely, and no stable point correspondence exists across frames. We propose a simulation-driven alternative that optimizes the parameters of a fluid simulator to reproduce dynamics observed in a single-view video, rather than fitting per-point deformation to pixel values. Our framework leverages generative 3D Gaussian Splatting (3DGS) models to obtain initial fluid geometry including unseen surfaces, estimates a physically grounded velocity field from surface motions with a physics-constraint correction algorithm, and converts it into a divergence-free, grid-based representation. A differentiable Affine Particle-In-Cell (APIC) simulation then optimizes effective simulation parameters, such as viscosity, boundary conditions, and inflow/outflow velocities, to match the observed dynamics. Because the dynamics are governed by forward simulation, the output assets are inherently editable, interactive, and temporally extendable, which reconstruction-based approaches cannot readily provide. Stage-wise ablations confirm that each stage is necessary, and hyperparameter sweeps show the pipeline to be robust without sensitive per-scene tuning. Our method handles various liquid fluids, including inviscid and viscous types, demonstrating the potential for automatically creating simulation-ready 3D fluid assets from readily available internet videos.

cs.GR↗

Same Physics, Different Gradients: A State-of-the-Art Report on Differentiable Physics Simulation

Differentiable simulation propagates derivatives through a physics simulator, turning animation, system identification, control, and computational design into gradient-based optimization. Engines differ in the physics they model and, less visibly, in which mathematical object they differentiate. We separate two questions the literature conflates. The referent is which object the returned derivative belongs to: the finite computation that executed, the converged equation it approximates, or the continuous dynamics. The realization describes the organization of the backward pass: automatically generated differentiation, an equation-level adjoint solve, or a custom adjoint. The referent defines the target against which exactness is assessed; the implementation determines how accurately that target is approximated. Cost depends on the realization together with how the states needed by the backward pass are retained or recovered. Crossing the axes places every method and engine we classify in a cell, separates claims the literature merges, and shows that the apparent trade-off between exactness and memory follows from how methods have been built rather than from a constraint. A second, orthogonal taxonomy covers contact, where the map is non-smooth. We then ask whether a correct gradient helps. Four mechanisms by which useful gradients are lost are cataloged and measured on one testbed, where the advantage of the exact derivative over the equation-level adjoint depends on where the fitting target comes from as much as on the solver budget, and we review the evidence that zeroth-order methods can outperform simulator gradients in the regimes where those mechanisms act. The model classes, systems techniques and applications are surveyed through this lens, and we close with a reporting checklist, a released diagnostic that computes it, and a research agenda.

cs.GR↗

DiffGIPC: Differentiable Mixed-Coordinate Contact Mechanics on GPU

Contact-rich inverse problems require efficient gradients and reliable enforcement of non-penetration. Existing differentiable methods provide fast simulation and rigid-deformable coupling, but contact treatments based on penalties or velocity-level constraints can permit penetration or positional drift. Incremental Potential Contact (IPC) maintains non-penetration through geometric barriers and {continuous collision detection (CCD)}. However, repeated forward and backward evaluations remain costly in full-space finite-element (FEM) implementations, particularly when nearly rigid components retain many vertex {degrees of freedom (DoFs)}. We present DiffGIPC, a GPU-accelerated differentiable IPC framework for optimizing interacting deformable and nearly rigid bodies. Our affine-body derivatives enable {rest-shape} design, initial-state optimization, and articulated control while retaining only twelve motion DoFs per affine body. These gradients account for how changes in geometry, placement, and actuation affect other objects through collision and friction. We preserve these interactions in one coupled FEM-affine adjoint system per frame, reducing the backward-system size without discarding the dependencies that drive the inverse problem. GPU-optimized backward computation further reduces the cost of repeated gradient evaluations. A reusable PyTorch interface connects supported physical parameters to user-defined parameter maps and losses across design, identification, motion, placement, and articulated control. Experiments demonstrate peak speedups over DiffIPC of approximately 150.0x with full-space FEM and 4133.3x with affine bodies for combined forward simulation and backward differentiation.

cs.GR↗

CoDimRecon: Agentic Reconstruction of Sim-Ready 3D Scenes with Deformable Curves, Surfaces, and Volumes

Reconstructing simulation-ready 3D scenes from real-world observations enables robotics, gaming, and immersive applications, yet existing methods largely assume rigid objects. This leaves an important gap for deformables, whose simulation-ready geometry depends on dimensionality (curves, surfaces, or volumes) and whose behavior may require models beyond elasticity. We present CoDimRecon, an agentic framework that reconstructs editable scenes containing rigid, articulated, and deformable objects from multi-view RGB observations. Scene-level geometric priors ground scale and layout, while object-level generated meshes guide the agent toward detailed, compact geometry; articulated rigid objects are decomposed into movable parts with explicit joints. For deformables, category-wise agent sessions reconstruct curves as centerlines with radii, surfaces as manifold shells with thickness, and volumes as watertight solids for volumetric meshing. Reusable simulator skills initialize compatible physical models and parameters, while agent-guided behavioral tests expose mismatches and trigger targeted revisions of motion, geometry, numerics, or material modeling. On evaluated Replica and ScanNet++ scenes, CoDimRecon achieves competitive compositional reconstruction accuracy while additionally producing deformable assets for rod, shell, and solid simulation. We further demonstrate robot interactions across all three representations, including a controlled paper-folding case in which behavioral testing motivates plastic bending.

cs.CV↗

Text2Sim: Agentic Physics-Based Simulation Generation with Distilled Expertise

Creating diverse physical simulations remains labor-intensive because assets, layout, physical parameters, motion, control, and rendering must be designed and debugged jointly. We present Text2Sim, a simulation-specialized agentic pipeline that converts a text-only request into an executable, editable dynamic case. Built on Genesis, Text2Sim uses a hierarchical agentic structure that combines a Planner with specialized Writers, asset-generation tools, and an independent Critic. Compact skills (Debug Cards) distilled from graphics demonstrations provide role-specific physical guidance for execution-based repair. We evaluate physical quality, visual quality, and human preference on 42 held-out prompts spanning rigid, articulated, deformable, and cloth phenomena, with a paper-level split between experience construction and evaluation. We design automatic physical and visual scorers to evaluate the quality of the results, and Text2Sim achieves higher scores than all four state-of-the-art baselines on both metrics. In blinded user studies with these baselines, significantly more participants prefer Text2Sim than prefer the baselines, which is consistent with the results from our automatic scorers. The pipeline also supports a broad range of downstream applications; we select dataset construction and extension to multimodal input as two representative examples. We will release the code, the Debug Card library, and a dataset of generated cases, each pairing the text prompt and rendered video with the executable program, assets, physical parameters, controls, and recorded states.

cs.GR↗

TAPESIM: Efficient Simulation of Adhesive Tape Dispensing for Robotic Manipulation

Applying adhesive tape to secure wire harnesses or seal packages requires robots to coordinate a flexible strip, a moving roll, and surfaces that attach and detach. Simulation could make these interactions repeatable for robot development and evaluation, but resolving every adhesive layer is expensive and can suppress roll motion at practical solver tolerances, while a permanently rigid roll cannot release material. We present TapeSim, a tape simulator that concentrates deformation near the unwinding region and along the released strip. We will release the source code. A rigid cluster represents most wound material, while an advancing deformable collar enables payout and leaves released tape flexible and reattachable. Optional releasable bonds simplify adhesive interfaces and reduce mean step times for smaller rolls. Controlled swing tests show improved roll rotation. At 32 turns, clustering gives 3.2-3.4x mean physics-step speedups at a fixed Newton tolerance and 4.5-8.4x for comparable roll motion. Across five real-motion Stick replays, the clustered variants reduce mean image-plane core-landmark error by 23-29% relative to the full-shell cohesive baseline. On 100 paired Peel cases, they improve balanced accuracy from 50% to 72.9-76.3%, with interface rankings varying across tasks. A teleoperated box-sealing sequence demonstrates attachment, dispensing, cutting, and sealing in a continuous workflow.

cs.RO↗

Robust and Efficient Penetration-Free Elastodynamics without Barriers

We introduce a barrier-free optimization framework for non-penetration elastodynamic simulation that matches the robustness of Incremental Potential Contact (IPC) while overcoming its two primary efficiency bottlenecks: (1) reliance on logarithmic barrier functions to enforce non-penetration constraints, which leads to ill-conditioned systems and significantly slows down the convergence of iterative linear solvers; and (2) the time-of-impact (TOI) locking issue, which restricts active-set exploration in collision-intensive scenes and requires a large number of Newton iterations. We propose a novel second-order constrained optimization framework featuring a custom augmented Lagrangian solver that avoids TOI locking by immediately incorporating all requisite contact pairs detected via CCD, enabling more efficient active-set exploration and leading to significantly fewer Newton iterations. By adaptively updating Lagrange multipliers rather than increasing penalty stiffness, our method prevents stagnation at zero TOI while maintaining a well-conditioned system. We further introduce a constraint filtering and decay mechanism to keep the active set compact and stable, along with a theoretical justification of our method's finite-step termination and first-order time integration accuracy under a cumulative TOI-based termination criterion. A comprehensive set of experiments demonstrates the efficiency, robustness, and accuracy of our method. With a GPU-optimized simulator design, our method achieves an up to 103x speedup over GIPC on challenging, contact-rich benchmarks - scenarios that were previously tractable only with barrier-based methods. Our code and data are open-sourced at https://simulation-intelligence.github.io/barrier-free .

cs.GR↗

Efficient Learning of Mesh-Based Physical Simulation with BSMS-GNN

Learning the physical simulation on large-scale meshes with flat Graph Neural Networks (GNNs) and stacking Message Passings (MPs) is challenging due to the scaling complexity w.r.t. the number of nodes and over-smoothing. There has been growing interest in the community to introduce \textit{multi-scale} structures to GNNs for physical simulation. However, current state-of-the-art methods are limited by their reliance on the labor-intensive drawing of coarser meshes or building coarser levels based on spatial proximity, which can introduce wrong edges across geometry boundaries. Inspired by the bipartite graph determination, we propose a novel pooling strategy, \textit{bi-stride} to tackle the aforementioned limitations. Bi-stride pools nodes on every other frontier of the breadth-first search (BFS), without the need for the manual drawing of coarser meshes and avoiding the wrong edges by spatial proximity. Additionally, it enables a one-MP scheme per level and non-parametrized pooling and unpooling by interpolations, resembling U-Nets, which significantly reduces computational costs. Experiments show that the proposed framework, \textit{BSMS-GNN}, significantly outperforms existing methods in terms of both accuracy and computational efficiency in representative physical simulations.

cs.LG↗

An Overlapping Schwarz Space-Time Refinement Framework for Material Point Method

We propose an overlapping Schwarz space-time refinement framework for the material point method (OS-MPM) to improve computational efficiency in problems with strongly localized deformation, contact, and large geometric nonlinearity. The method decomposes the domain into overlapping coarse and fine subdomains with heterogeneous spatial and temporal resolutions, while retaining standard MPM discretizations within each subdomain. Coarse-fine coupling is achieved through an MPM-specific Schwarz iteration combining mass-weighted spatial transmission and temporal interpolation for sub-cycling. In contrast to refinement strategies based on modified basis functions, transition kernels, or strongly enforced interface constraints, the proposed approach preserves the modular structure of standard MPM and shifts the coupling complexity to nonmatching-grid interface operators within the Schwarz alternating procedure. Numerical examples, including a gravity-driven cantilever beam, Hertzian contact, and an elastic inclusion problem, show that the method reproduces analytical or fine-resolution reference solutions with good accuracy and convergence behavior. In the inclusion benchmark, the proposed framework achieves comparable or slightly lower error than single-domain fine simulations at the finest tested resolutions, while reducing computational cost by up to 9.15 times. A three-dimensional folding example further demonstrates the generality of the framework. These results indicate that the proposed method provides an accurate, modular, and efficient route for local space-time refinement in MPM.

cs.CE↗

AGIPC: Adaptive In-Solve Algebraic Coarsening for GPU IPC

Implicit time integration is key to robustly simulating stiff materials and large deformations, but its performance is often dominated by repeatedly solving large linear systems. Adaptive coarsening can reduce this cost by concentrating degrees of freedom (DoF) to where it is most needed, yet conventional explicit remeshing changes connectivity (and often vertex ordering), complicating parallel implementations, harming memory locality, and sometimes being disallowed when it may introduce local geometry intersections. Adaptive subspace approaches avoid topological changes, but basis construction and updates incur irregular data access patterns and typically produce dense system matrices, limiting GPU efficiency and keeping many practical systems CPU-centric. We present algebraic adaptive in-solve coarsening, a GPU-oriented method that dynamically reduces DoF within the Newton solve of implicit time integration without explicit topological modification. Starting from a fine mesh, we express adaptivity as a selective edge-collapse process governed by per-edge tags. Collapsible edges are aggregated in parallel using a warp-level hash mapping scheme that groups fine vertices into coarse super-nodes, while protected edges preserve local detail. This defines an implicit coarse mesh whose linear system is assembled algebraically by mapping and reducing fine-scale gradients and Hessians via efficient GPU reduction kernels. We solve the resulting coarse system with a preconditioned conjugate gradient (PCG) method and then prolongate the solution back to the fine mesh. Our approach integrates seamlessly with IPC's barrier energy and exploits GPU parallelism end-to-end. Across a range of challenging scenarios, we achieve up to 3x speedup over a state-of-the-art GPU IPC solver while producing visually indistinguishable results.

cs.GR↗

Efficient B-Spline Finite Elements for Cloth Simulation

We present an efficient B-spline finite element method (FEM) for cloth simulation. While higher-order FEM has long promised higher accuracy, its adoption in cloth simulators has been limited by its larger computational costs while generating results with similar visual quality. Our contribution is a full algorithmic pipeline that makes cloth simulation using quadratic B-spline surfaces faster than standard linear FEM in practice while consistently improving accuracy and visual fidelity. Using quadratic B-spline basis functions, we obtain a globally $C^1$-continuous displacement field that supports consistent discretization of both membrane and bending energies, effectively reducing locking artifacts and mesh dependence common to linear elements. To close the performance gap, we introduce a reduced integration scheme that separately optimizes quadrature rules for membrane and bending energies, an accelerated Hessian assembly procedure tailored to the spline structure, and an optimized linear solver based on partial factorization. Together, these optimizations make high-order, smooth cloth simulation competitive at scale, yielding an average $2\times$ speedup over linear FEM in our tests. Extensive experiments demonstrate improved accuracy, wrinkle detail, and robustness, including contact-rich scenarios, relative to linear FEM and recent higher-order approaches. Our method enables realistic wrinkling dynamics across a wide range of material parameters and supports practical garment animation, providing a new promising spatial discretization for high-quality cloth simulation.

cs.GR↗

Penetration-free Solid-Fluid Interaction on Shells and Rods

We introduce a novel approach to simulate the interaction between fluids and thin elastic solids without any penetration. Our approach is centered around an optimization system augmented with barriers, which aims to find a configuration that ensures the absence of penetration while enforcing incompressibility for the fluids and minimizing elastic potentials for the solids. Unlike previous methods that primarily focus on velocity coherence at the fluid-solid interfaces, we demonstrate the effectiveness and flexibility of explicitly resolving positional constraints, including both explicit representation of solid positions and the implicit representation of fluid level-set interface. To preserve the volume of the fluid, we propose a simple yet efficient approach that adjusts the associated level-set values. Additionally, we develop a distance metric capable of measuring the separation between an implicitly represented surface and a Lagrangian object of arbitrary codimension. By integrating the inertia, solid elastic potential, damping, barrier potential, and fluid incompressibility within a unified system, we are able to robustly simulate a wide range of processes involving fluid interactions with lower-dimensional objects such as shells and rods. These processes include topology changes, bouncing, splashing, sliding, rolling, floating, and more.

cs.GR↗

PAT3D: Physics-Augmented Text-to-3D Scene Generation

We introduce PAT3D, the first physics-augmented text-to-3D scene generation framework that integrates vision-language models with physics-based simulation to produce physically plausible, simulation-ready, and intersection-free 3D scenes. Given a text prompt, PAT3D generates 3D objects, infers their spatial relations, and organizes them into a hierarchical scene tree, which is then converted into initial conditions for simulation. A differentiable rigid-body simulator ensures realistic object interactions under gravity, driving the scene toward static equilibrium without interpenetrations. To further enhance scene quality, we introduce a simulation-in-the-loop optimization procedure that guarantees physical stability and non-intersection, while improving semantic consistency with the input prompt. Experiments demonstrate that PAT3D substantially outperforms prior approaches in physical plausibility, semantic consistency, and visual quality. Beyond high-quality generation, PAT3D uniquely enables simulation-ready 3D scenes for downstream tasks such as scene editing and robotic manipulation. Code and data are available at: https://github.com/Simulation-Intelligence/PAT3D.

cs.CV↗

An Implicit Compact-Kernel Material Point Method for Computational Solid Mechanics

The numerical performance of the material point method (MPM) is strongly governed by the particle-grid kernel, which controls the trade-off among smoothness, locality, numerical diffusion, contact accuracy, and computational cost. Although wide-support smooth kernels can effectively suppress cell-crossing instability, they often introduce increased numerical diffusion, artificial contact gaps, and higher transfer cost. In contrast, the suitability of compact-kernel designs for implicit computational solid mechanics remains unclear. In this work, we develop an implicit formulation of the Compact-Kernel Material Point Method (CK-MPM) and assess its performance through benchmark problems in linear and nonlinear solid mechanics, including cantilever bending, Hertzian contact, narrow-clearance free fall, and colliding hyperelastic rings. The results show that implicit CK-MPM retains the advantages of compact support while preserving the smoothness required for robust large-deformation simulation. Compared with linear MPM, it reduces cell-crossing-induced stress noise and excessive numerical dissipation; compared with quadratic B-spline MPM, it improves contact locality and reduces artificial contact gaps and early-contact artifacts while maintaining comparable overall smoothness and accuracy. These results indicate that CK-MPM provides a viable implicit MPM framework for computational mechanics.

cs.CE↗

UNIC: Neural Garment Deformation Field for Real-time Clothed Character Animation

Simulating physically realistic garment deformations is an essential task for virtual immersive experience, which is often achieved by physics simulation methods. However, these methods are typically time-consuming, computationally demanding, and require costly hardware, which is not suitable for real-time applications. Recent learning-based methods tried to resolve this problem by training graph neural networks to learn the garment deformation on vertices, which, however, fail to capture the intricate deformation of complex garment meshes with complex topologies. In this paper, we introduce a novel neural deformation field-based method, named UNIC, to animate the garments of an avatar in real time, given the motion sequences. Our key idea is to learn the instance-specific neural deformation field to animate the garment meshes. Such an instance-specific learning scheme does not require UNIC to generalize to new garments but only to new motion sequences, which greatly reduces the difficulty in training and improves the deformation quality. Moreover, neural deformation fields map the 3D points to their deformation offsets, which not only avoids handling topologies of the complex garments but also injects a natural smoothness constraint in the deformation learning. Extensive experiments have been conducted on various kinds of garment meshes to demonstrate the effectiveness and efficiency of UNIC over baseline methods, making it potentially practical and useful in real-world interactive applications like video games.

cs.CV↗

Energy-Controllable Time Integration for Elastodynamic Contact

Dynamic simulation of elastic bodies is a longstanding task in engineering and computer graphics. In graphics, numerical integrators like implicit Euler and BDF2 are preferred due to their stability at large time steps, but they tend to dissipate energy uncontrollably. In contrast, symplectic methods like implicit midpoint can conserve energy but are not unconditionally stable and fail on moderately stiff problems. To address these limitations, we propose a general class of numerical integrators for Hamiltonian problems which are symplectic on linear problems, yet have superior stability on nonlinear problems. With this, we derive a novel energy-controllable time integrator, A-search, a simple modification of implicit Euler that can follow user-specified energy targets, enabling flexible control over energy dissipation or conservation while maintaining stability and physical fidelity. Our method integrates seamlessly with barrier-type energies and allows for inversion-free and penetration-free guarantees, making it well-suited for handling large deformations and complex collisions. Extensive evaluations over a wide range of material parameters and scenes demonstrate that A-search has biases to keep energy in low frequency motion rather than dissipation, and A-search outperforms traditional methods such as BDF2 at similar total running times by maintaining energy and leading to more visually desirable simulations.

cs.GR↗

TRELLISWorld: Training-Free World Generation from Object Generators

Text-driven 3D scene generation holds promise for a wide range of applications, from virtual prototyping to AR/VR and simulation. However, existing methods are often constrained to single-object generation, require domain-specific training, or lack support for full 360-degree viewability. In this work, we present a training-free approach to 3D scene synthesis by repurposing general-purpose text-to-3D object diffusion models as modular tile generators. We reformulate scene generation as a multi-tile denoising problem, where overlapping 3D regions are independently generated and seamlessly blended via weighted averaging. This enables scalable synthesis of large, coherent scenes while preserving local semantic control. Our method eliminates the need for scene-level datasets or retraining, relies on minimal heuristics, and inherits the generalization capabilities of object-level priors. We demonstrate that our approach supports diverse scene layouts, efficient generation, and flexible editing, establishing a simple yet powerful foundation for general-purpose, language-driven 3D scene construction.

cs.CV↗

VR-Doh: Hands-on 3D Modeling in Virtual Reality

We introduce VR-Doh, an open-source, hands-on 3D modeling system that enables intuitive creation and manipulation of elastoplastic objects in Virtual Reality (VR). By customizing the Material Point Method (MPM) for real-time simulation of hand-induced large deformations and enhancing 3D Gaussian Splatting for seamless rendering, VR-Doh provides an interactive and immersive 3D modeling experience. Users can naturally sculpt, deform, and edit objects through both contact- and gesture-based hand-object interactions. To achieve real-time performance, our system incorporates localized simulation techniques, particle-level collision handling, and the decoupling of physical and appearance representations, ensuring smooth and responsive interactions. VR-Doh supports both object creation and editing, enabling diverse modeling tasks such as designing food items, characters, and interlocking structures, all resulting in simulation-ready assets. User studies with both novice and experienced participants highlight the system's intuitive design, immersive feedback, and creative potential. Compared to existing geometric modeling tools, VR-Doh offers enhanced accessibility and natural interaction, making it a powerful tool for creative exploration in VR.

cs.GR↗