arXiv Science⌕ Search

arXiv subjects

Min Kim

Publications and source records attributed to Min Kim.

12 recordsLinked to original sources

Self- and Other-Labels Induce Bidirectional Bias in LLM Judges

As LLM-as-a-judge becomes increasingly widespread, self-preference -- the tendency of a judge to favor its own outputs -- raises growing concerns about evaluation reliability. However, this bias has been studied predominantly on generated text, where stylistic features and response quality are inevitably conflated. As a result, existing measurements cannot separate genuine self-preference from these confounds. We address this limitation by changing the object of evaluation: instead of judging generated text, ten LLMs assess sets of narrative constraints selected from a shared pool, which carry no stylistic fingerprint yet retain a recoverable model-specific signature. Two experiments on this task yield complementary findings. Under blind evaluation, self-preference disappears, with a small effect remaining in the opposite direction once selection quality and judge severity are controlled. Under matched quality, however, self- and other-labels alone -- without naming any model -- shift scores bidirectionally. LLM judges inflate scores for self-labeled selections and deflate those for other-labeled ones regardless of the selection's actual source. We make two contributions: 1) authorship attribution is a distinct driver of evaluation bias, and 2) ground-truth-free tasks can serve as controlled instruments for studying LLM judge behavior.

cs.CL↗

Megabar Shocks on a Benchtop

Techniques to generate megabar (100 GPa) pressure are critical for the study of materials under extreme conditions. However, kJ-class lasers are typically needed to generate such extreme pressures. Here, we present a method to reach megabar pressure on a benchtop using only tens of mJ a few millijoules of laser pulse energy. The core of our method is the utilization of multiple laser rings of different diameters and time delays to additively excite a focusing shock wave. Using high-speed imaging and a streak camera, we measured the shock trajectory and inferred pressure, temperature and density using hydrocode simulation. Our shock compression efficiency, informed by hydrocode, has achieved 23 GPa/mJ. If scaled up, our method may enable high-energy-density experiments on a benchtop.

physics.optics↗

Narrative Lookahead in LLMs: Event-Level Decodability, Predictive Advantage, and Steering

Do language models carry information about narrative events before writing them, and how far ahead? We examine narrative lookahead through salient, state-changing events rather than tokens or response-level attributes. We extract 23,355 LLM-annotated events from 2,000 stories generated by four open-weight LLMs, labeling them along three nonexclusive dimensions of change: within agents, between agents, and in the story world, with human validation on a subset. Event segmentation and plot-independent labels enable comparisons across stories at horizons measured in events rather than in tokens. At event ends, we probe hidden states for upcoming event types and compare predictions with text-only predictors using matched prefixes. Across four models, future event types are decodable above prevalence baselines for at least four subsequent events, but probes significantly outperform both primary text-only predictors only for the next event. In exploratory steering with OLMo-3.1-32B, a probe-derived direction shifts the proportion of the target event type in both intended directions at higher strengths. Our event-level approach links the prediction of future narrative developments to interventions that reshape subsequent event composition.

cs.CL↗

Intrinsic Contraction Theory and Stabilization of Probability Measures on the Wasserstein Space

Deterministic flows can contract Wasserstein distances between probability laws without being contractive in point-state space. We develop a differential contraction theory for pushforward flows on forward-invariant subsets of the 2-Wasserstein space that quotients out the gauge freedom of the continuity equation. Weighted Helmholtz-Hodge decomposition and the Wasserstein contingent cone define the weighted horizontal tangent cone (whtc). Requiring the contraction quadratic form to be nonpositive only on the whtc yields the Intrinsic Wasserstein Contraction Condition (IWCC), which generalizes the classical contraction LMI and recovers it on Dirac measures. An almost-everywhere Euler approximation based on the superposition principle and Banach-valued Lebesgue differentiation theorem proves that IWCC is sufficient for intrinsic Wasserstein contraction. Law contraction without point-state contraction is illustrated by a rotationally symmetric shear example. Finally, a new comparison lemma yields an incremental Wasserstein ISS theorem; for Brockett's integrator, we prove exponential stabilization of a class of axisymmetric laws to the uniform law on a circle via a smooth feedback.

math.OC↗

Statistical Learning of Contractive Dynamical Representations for Composite Adaptive Control

We present a representation-learning framework for composite adaptive tracking control under dynamically coupled disturbances. The framework connects classical disturbance-accommodating control (DAC) to recent last-layer adaptive disturbance-rejection methods. Specifically, we introduce a statistically principled hard expectation-maximization (hard-EM) procedure, with a Kalman smoother in the hard E-step, to identify dynamical representations of disturbance whose latent evolution is uniformly contractive. The learned representation evolves a latent disturbance-excitation state from measured plant features and control inputs and decodes that state into the time-varying disturbance acting on the nominal plant, thereby extending prior "fixed-decay" last-layer adaptive methods to a learned, predictive DAC-style formulation. Combined with Bayesian filtering of the learned latent state, this representation yields a composite adaptive tracking controller with predictive capability and provable exponential convergence to a bounded neighborhood. We validate our approach experimentally on a slippery ground vehicle carrying a liquid-sloshing tank and a pendulum load, and we further assess its robustness on a system of coupled Duffing oscillators. Across both settings, the method achieves accurate disturbance prediction and improved overall tracking performance relative to fixed-decay representation-learning ablations, LTI disturbance-accommodating baselines, and model-based PD baselines.

eess.SY↗

Schur-Neural KF: Learned Schur-Consistent Corrections to the Extended Kalman Filter

We present Schur-Neural KF (SN-KF), a learning-based correction to the extended Kalman filter (EKF) that preserves the probabilistic conditioning interpretation of the EKF. The method perturbs the predictive state-measurement cross-covariance and the Cholesky factor of the measurement noise covariance so that the resulting joint predictive covariance is always positive semidefinite. The positive semidefiniteness is ensured by a Schur complement-based parametrization. We instantiate the parametrization with a recurrent neural architecture whose matrix outputs are modulated by amplitude gates. We prove that incorporating a measurement does not increase the filter's state uncertainty, and show that no measurement can induce an arbitrarily large state correction relative to its statistical surprise. We also present a perturbative analysis suggesting SN-KF's structural strength in the data-scarce regime. We provide two numerical experiments to illustrate the practical benefits of SN-KF. In a two-radar experiment, enforcing Schur-consistency provides a much broader failure-free hyperparameter region and reduces RMSE for small training subsets, consistent with our theoretical analysis in the data-scarce regime. In the unicycle experiment, SN-KF achieves the best precision, recall, false alarm rate, and gated RMSE under innovation-based sensor-fault rejection.

eess.SY↗

Interplay between Interlayer Shift and Twist: Twisted van der Waals Nanowires Driven by Rotational Twinning

In van der Waals(vdW) layered materials, interlayer shift and twist have enabled the control of material properties through polytype and moire engineering. Various approaches, including bottom-up synthesis and manual layer-by-layer stacking, have been utilized to engineer targeted stacking configurations. However, the interplay between interlayer shift and twist, as well as reliable mechanisms for fine-tuning these parameters, remains largely unexplored. Here, we report a previously unrecognized twisting mechanism arising from preferred tilted stacking and twinning in vdW crystals. Electron diffraction and atomic-resolution scanning transmission electron microscopy(STEM) imaging reveal that the lattice planes of group-IV chalcogenide GeSe_{2-x}Te_x rotate continuously along the nanowire growth axis, with twist rates depending systematically on nanowire radius. Atomic-scale imaging further identifies a continuous rotational twin boundary extending along the central region of the nanowire. First-principles calculations and structural relaxation simulations confirm that the twisting deformation originates from energetic competition between the preferred interlayer stacking registry and the strain cost imposed by rotational twinning. These findings establish rotational twinning as an intrinsic route to spontaneous twist formation and provide a design principle for realizing twist-engineered vdW crystals with compatible crystal symmetries and stacking motifs.

cond-mat.mtrl-sci↗

Co-evaporated Formamidinium tin triiodide with suppressed p-type self-doping

Co-evaporation of formamidinium tin triiodide (FASnI3) precursors, without any additives or reducing agents, leads to the growth of a highly crystalline thin film which shows a bandgap around 1.31 eV, closely matching the theoretical value predicted from the ideal single crystal structure of FASnI3. The polycrystalline thin film presents a lower tendency of Sn2+ to Sn4+ oxidation and highly reduced tendency to self-doping, demonstrating, overall, an improved resistance to defects formation. These findings suggest solvent-free co-evaporation processes as a promising route for high quality Sn-based perovskite polycrystalline thin films.

cond-mat.mtrl-sci↗

Prosocial Behavior Detection in Player Game Chat: From Aligning Human-AI Definitions to Efficient Annotation at Scale

Detecting prosociality in text--communication intended to affirm, support, or improve others' behavior--is a novel and increasingly important challenge for trust and safety systems. Unlike toxic content detection, prosociality lacks well-established definitions and labeled data, requiring new approaches to both annotation and deployment. We present a practical, three-stage pipeline that enables scalable, high-precision prosocial content classification while minimizing human labeling effort and inference costs. First, we identify the best LLM-based labeling strategy using a small seed set of human-labeled examples. We then introduce a human-AI refinement loop, where annotators review high-disagreement cases between GPT-4 and humans to iteratively clarify and expand the task definition-a critical step for emerging annotation tasks like prosociality. This process results in improved label quality and definition alignment. Finally, we synthesize 10k high-quality labels using GPT-4 and train a two-stage inference system: a lightweight classifier handles high-confidence predictions, while only $\sim$35\% of ambiguous instances are escalated to GPT-4o. This architecture reduces inference costs by $\sim$70% while achieving high precision ($\sim$0.90). Our pipeline demonstrates how targeted human-AI interaction, careful task formulation, and deployment-aware architecture design can unlock scalable solutions for novel responsible AI tasks.

cs.CL↗

Online Moderation in Competitive Action Games: How Intervention Affects Player Behaviors

Online competitive action games have flourished as a space for entertainment and social connections, yet they face challenges from a small percentage of players engaging in disruptive behaviors. This study delves into the under-explored realm of understanding the effects of moderation on player behavior within online gaming on an example of a popular title - Call of Duty(R): Modern Warfare(R)II. We employ a quasi-experimental design and causal inference techniques to examine the impact of moderation in a real-world industry-scale moderation system. We further delve into novel aspects around the impact of delayed moderation, as well as the severity of applied punishment. We examine these effects on a set of four disruptive behaviors including cheating, offensive user name, chat, and voice. Our findings uncover the dual impact moderation has on reducing disruptive behavior and discouraging disruptive players from participating. We further uncover differences in the effectiveness of quick and delayed moderation and the varying severity of punishment. Our examination of real-world gaming interactions sets a precedent in understanding the effectiveness of moderation and its impact on player behavior. Our insights offer actionable suggestions for the most promising avenues for improving real-world moderation practices, as well as the heterogeneous impact moderation has on indifferent players.

cs.CY↗

Businesses in high-income zip codes often saw sharper visit reductions during the COVID-19 pandemic

As the COVID-19 pandemic unfolded, the mobility patterns of people worldwide changed drastically. While travel time, costs, and trip convenience have always influenced mobility, the risk of infection and policy actions such as lockdowns and stay-at-home orders emerged as new factors to consider in the location-visitation calculus. We use SafeGraph mobility data from Minnesota, USA, to demonstrate that businesses (especially those requiring extended indoor visits) located in affluent zip codes witnessed sharper reductions in visits (relative to pre-pandemic times) outside of the lockdown periods than their poorer counterparts. To the extent visits translate into sales, we contend that post-pandemic recovery efforts should prioritize relief funding, keeping the losses relating to diminished visits in mind.

cs.CY↗

Turning bad into good: a water-splitting-active hole transporting material to preserve the performance of perovskite solar cells in humid environments

Lead halide perovskite-based photoactive layers are nowadays employed for a large number of optoelectronic applications, from solar cells to photodetectors and light-emitting diodes, because of their excellent absorption, emission and charge-transport properties. Unfortunately, their commercialization is still hindered by an intrinsic instability towards classical environmental conditions. Water in particular promotes fast decomposition, leading to a drastic decrease in device performance. An innovative functional approach to overcome this major issue could derive from integrating water-splitting active species within charge extracting layers adjacent to the perovskite photoactive layer, converting incoming water molecules into molecular oxygen and hydrogen before they reach this last one, thus preserving device performance in time. In this work we report for the first time on a perovskite-ancillary layer based on CuSCN nanoplateletes dispersed in a p-type semiconducting polymeric matrix, combining hole extraction/transport properties with good water-oxidation activity, that transforms incoming water molecules and further triggers the in situ p-doping of the conjugated polymer by means of the produced dioxygen, further improving transport of photogenerated charges. This composite layer enables the long-term stabilization of a mixed cation lead halide perovskite within a direct solar cell architecture, maintaining a stable performance for 28 days in high-moisture simulated conditions. Our findings demonstrate that the engineering of a hole extraction layer with water-splitting active additives represent a valuable strategy to mitigate the degradation of perovskite solar cells exposed to atmospheric humidity. A similar approach could be employed in the future to improve stabilities of other optoelectronic devices based on water-sensitive species.

physics.app-ph↗