arXiv subjects

Milica Petkovic

Publications and source records attributed to Milica Petkovic.

10 recordsLinked to original sources

arXiv2026

Sensing Assisted Satellite Backhaul with FBL UL and Broadcast DL for Massive IoT

Massive Internet of Things (IoT) networks operate with short packets whose reliability is limited by finite block- length (FBL) effects, while remote deployments increasingly rely on Low Earth Orbit (LEO) satellites for backhaul connectivity that is sensitive to atmospheric attenuation. In this paper, we pro- pose a unified end-to-end framework for satellite-assisted massive IoT networks that jointly models uplink FBL random access, sensing assisted satellite backhaul, and worst user broadcast downlink transmission. Uplink reliability is characterized using stochastic geometry, while atmospheric sensing and conservative SNR margins enable FBL-safe backhaul adaptation. Numerical results reveal an optimal uplink access probability due to the tradeoff between spatial reuse and FBL reliability, and show that sensing assisted backhaul margins significantly improve robustness against attenuation uncertainty.

cs.IT↗

arXiv2026

Reliability Analysis of Slotted Aloha with Capture for an OWC-based IoT system

In this article, we consider a random access scheme for an indoor Internet of Things (IoT) framework that uses optical wireless communication (OWC). We focus on a Slotted ALOHA (SA)-based solution where a number of OWC IoT users contend to send data to a central OWC receiver. In any given slot, and for a randomly selected active user, we consider the reliability of decoding the user's data packet at the receiver. This is done by deriving the signal-to-noise-and-interference-ratio (SINR) statistics from a randomly chosen user and evaluating the probability that the user's SINR is below a given threshold. By placing our analysis in the context of an indoor OWC IoT uplink setup, and employing the standard OWC channel model, we investigate the trade-offs between the reliability and the OWC system parameters such as the cell area or the transmitter's semi-angle. We obtain valuable insights into the design of an SA-based random access solution for a typical indoor OWC cell.

cs.IT↗

arXiv2026

Physical Layer Security in Finite Blocklength Massive IoT with Randomly Located Eavesdroppers

This paper analyzes the physical layer security performance of massive uplink Internet of Things (IoT) networks operating under the finite blocklength (FBL) regime. IoT devices and base stations (BS) are modeled using a stochastic geometry approach, while an eavesdropper is placed at a random location around the transmitting device. This system model captures security risks common in dense IoT deployments. Analytical expressions for the secure success probability, secrecy outage probability and secrecy throughput are derived to characterize how stochastic interference, fading and eavesdropper spatial uncertainty interact with FBL constraints in short packet uplink transmissions. Numerical results illustrate key system behavior under different network and channel conditions.

cs.IT↗

arXiv2024

Performance Analysis of UAV-Assisted RF-UOWC Systems

This paper introduces a relay-assisted solution for downlink communications in a mixed system of Radio Frequency (RF) and Underwater Optical Wireless Communications (UOWC) technologies. During the initial downlink phase, data transmission occurs via RF link between hovering Unmanned Aerial Vehicle (UAV) and the floating buoys at the water surface. As fixed buoy acts as amplify-and-forward relays, the second UOWC link represents downlink signal transmission from the floating buoy to the underwater device. Best relay selection is adopted, meaning that only the buoy with the best estimated RF-based UAV-buoy channel will perform signal transmission to an underwater device. Analytical expression for the outage probability is derived and utilized to examine the system's performance behaviour for various UOWC and RF channel conditions.

eess.SY↗

arXiv2023

Slotted Aloha for Optical Wireless Communications in Internet of Underwater Things

In this work, we design and analyse a Slotted ALOHA (SA) solution for Optical Wireless Communication (OWC)-based Internet of Underwater Things (IoUT). In the proposed system, user devices exchange data with an access point (AP) which exploits the capture effect. The space spanned by the IoUT nodes is three-dimensional, i.e., users are located in half-sphere centered at the AP placed at the bottom of a floating object at the water surface level. The analytical expressions for the system throughput and reliability expressed in terms of the outage probability are derived. Based on the simulated signal-to-noise-and-interference-ratio statistics and derived analytical expressions, we present numerical results that investigate the trade-off between the system performance and the IoUT system parameters, such as the number of users, activation probability and type of water medium. The presented conclusions provide valuable insights into the design of an SA-based solution for IoUT communications.

cs.NI↗

arXiv2023

Two-Tier Multi-Rate Slotted ALOHA for OWC/RF-Based IoT Networks

We consider a massive Internet of Things (IoT) scenario where indoor IoT devices access the network via optical wireless communication (OWC) IoT systems that relay data via a backhaul radio frequency (RF) low-power wide-area network (LP WAN). We propose a novel two-tier multi-rate Slotted ALOHA (SA) system model to design and analyse such hybrid OWC/RF networks. For a particular hybrid OWC/RF setup, we present an in-depth numerical investigation that provides insights into the proposed two-tier multi-rate hybrid OWC/RF SA system design.

cs.NI↗

arXiv2022

Slotted Aloha with Capture for OWC-based IoT: Finite Block-Length Performance Analysis

In this paper, we propose a Slotted ALOHA (SA)-inspired solution for an indoor optical wireless communication (OWC)-based Internet of Things (IoT) system. Assuming that the OWC receiver exploits the capture effect, we are interested in the derivation of error probability of decoding a short-length data packet originating from a randomly selected OWC IoT transmitter. The presented OWC system analysis rests on the derivation of the signal-to-noise-and-interference-ratio (SINR) statistics and usage of finite block-length (FBL) information theory, from which relevant error probability and throughput is derived. Using the derived expressions, we obtain numerical results which are further utilized to characterize the trade-offs between the system performance and the OWC system setup parameters. The indoor OWC-based system geometry plays an important role in the system performance, thus the presented results can be used as a guideline for the system design to optimize the performance of the SA-based random access protocol.

cs.NI↗

arXiv2022

Outage Probability Analysis of RF/FSO-VLC Communication Relaying System

This paper presents an analysis of the asymmetric relaying system which provides communication between hybrid outdoor sub-system and indoor visible light communications (VLC) access points. The outdoor sub-system represents a hybrid radio-frequency (RF)/free-space optical (FSO) system, introduced to reduce the impact of weather conditions on transmission quality. Closed-form outage probability analytical expression is derived. Numerical results are presented and confirmed by Monte Carlo simulations. The effects of system and channel parameters on the outage probability performance are investigated and discussed. Greater optical transmitted power of the VLC subsystem reflects in better system performance, as well as lower indoor environment height. When the indoor room is higher, the propagation of the optical signal is longer, and there will be greater power dissipation and performance deterioration. In addition, the outage probability floor is noticed, which is important limiting factor for relaying system design.

cs.NI↗

arXiv2022

Relay-aided Slotted Aloha for Optical Wireless Communications

We consider a relay-aided Slotted ALOHA solution for uplink random access for an Optical Wireless Communications (OWC)-based Internet of Things (IoT). The first phase of uplink, the one between IoT devices and the relays, is realized using indoor OWC, while the second phase, between the relays and a base station, represents the long-range RF transmission based on low-power wide area network such as LoRaWAN and occurs outdoors. The throughput performance dependence on the OWC and RF channel conditions is observed. The behavior of the performance gain due to adding relays is highlighted and investigated under different channel and traffic conditions.

cs.NI↗

arXiv2020

Development of Smartphone Application for Evaluation of Passenger Comfort

Nowadays, smartphones are not utilized for communications only. Smartphones are equipped with a lot of sensors that can be utilized for different purposes. For example, inertial sensors have been used extensively in recent years for measuring and monitoring performance in many different applications. Basically, data from the sensors are utilized for estimation of smartphone orientation. There is a lot of applications which can utilize these data. This paper deals with an algorithm developed for inertial sensors data utilization for vehicle passenger comfort assessment.

eess.SP↗