arXiv subjects

Michele Magno

Publications and source records attributed to Michele Magno.

At least 73 records · Page 4Linked to original sources

arXiv2025

M-Predictive Spliner: Enabling Spatiotemporal Multi-Opponent Overtaking for Autonomous Racing

Unrestricted multi-agent racing presents a significant research challenge, requiring decision-making at the limits of a robot's operational capabilities. While previous approaches have either ignored spatiotemporal information in the decision-making process or been restricted to single-opponent scenarios, this work enables arbitrary multi-opponent head-to-head racing while considering the opponents' future intent. The proposed method employs a KF-based multi-opponent tracker to effectively perform opponent ReID by associating them across observations. Simultaneously, spatial and velocity GPR is performed on all observed opponent trajectories, providing predictive information to compute the overtaking maneuvers. This approach has been experimentally validated on a physical 1:10 scale autonomous racing car, achieving an overtaking success rate of up to 91.65% and demonstrating an average 10.13%-point improvement in safety at the same speed as the previous SotA. These results highlight its potential for high-performance autonomous racing.

cs.RO↗

arXiv2025

Post-Training Quantization for Video Matting

Video matting is crucial for applications such as film production and virtual reality, yet deploying its computationally intensive models on resource-constrained devices presents challenges. Quantization is a key technique for model compression and acceleration. As an efficient approach, Post-Training Quantization (PTQ) is still in its nascent stages for video matting, facing significant hurdles in maintaining accuracy and temporal coherence. To address these challenges, this paper proposes a novel and general PTQ framework specifically designed for video matting models, marking, to the best of our knowledge, the first systematic attempt in this domain. Our contributions include: (1) A two-stage PTQ strategy that combines block-reconstruction-based optimization for fast, stable initial quantization and local dependency capture, followed by a global calibration of quantization parameters to minimize accuracy loss. (2) A Statistically-Driven Global Affine Calibration (GAC) method that enables the network to compensate for cumulative statistical distortions arising from factors such as neglected BN layer effects, even reducing the error of existing PTQ methods on video matting tasks up to 20%. (3) An Optical Flow Assistance (OFA) component that leverages temporal and semantic priors from frames to guide the PTQ process, enhancing the model's ability to distinguish moving foregrounds in complex scenes and ultimately achieving near full-precision performance even under ultra-low-bit quantization. Comprehensive quantitative and visual results show that our PTQ4VM achieves the state-of-the-art accuracy performance across different bit-widths compared to the existing quantization methods. We highlight that the 4-bit PTQ4VM even achieves performance close to the full-precision counterpart while enjoying 8x FLOP savings.

cs.CV↗

arXiv2025

R-CARLA: High-Fidelity Sensor Simulations with Interchangeable Dynamics for Autonomous Racing

Autonomous racing has emerged as a crucial testbed for autonomous driving algorithms, necessitating a simulation environment for both vehicle dynamics and sensor behavior. Striking the right balance between vehicle dynamics and sensor accuracy is crucial for pushing vehicles to their performance limits. However, autonomous racing developers often face a trade-off between accurate vehicle dynamics and high-fidelity sensor simulations. This paper introduces R-CARLA, an enhancement of the CARLA simulator that supports holistic full-stack testing, from perception to control, using a single system. By seamlessly integrating accurate vehicle dynamics with sensor simulations, opponents simulation as NPCs, and a pipeline for creating digital twins from real-world robotic data, R-CARLA empowers researchers to push the boundaries of autonomous racing development. Furthermore, it is developed using CARLA's rich suite of sensor simulations. Our results indicate that incorporating the proposed digital-twin framework into R-CARLA enables more realistic full-stack testing, demonstrating a significant reduction in the Sim-to-Real gap of car dynamics simulation by 42% and by 82% in the case of sensor simulation across various testing scenarios.

cs.RO↗

arXiv2025

Event-Priori-Based Vision-Language Model for Efficient Visual Understanding

Large Language Model (LLM)-based Vision-Language Models (VLMs) have substantially extended the boundaries of visual understanding capabilities. However, their high computational demands hinder deployment on resource-constrained edge devices. A key source of inefficiency stems from the VLM's need to process dense and redundant visual information. Visual inputs contain significant regions irrelevant to text semantics, rendering the associated computations ineffective for inference. This paper introduces a novel Event-Priori-Based Vision-Language Model, termed EP-VLM. Its core contribution is a novel mechanism leveraging motion priors derived from dynamic event vision to enhance VLM efficiency. Inspired by human visual cognition, EP-VLM first employs event data to guide the patch-wise sparsification of RGB visual inputs, progressively concentrating VLM computation on salient regions of the visual input. Subsequently, we construct a position-preserving tokenization strategy for the visual encoder within the VLM architecture. This strategy processes the event-guided, unstructured, sparse visual input while accurately preserving positional understanding within the visual input. Experimental results demonstrate that EP-VLM achieves significant efficiency improvements while maintaining nearly lossless accuracy compared to baseline models from the Qwen2-VL series. For instance, against the original Qwen2-VL-2B, EP-VLM achieves 50% FLOPs savings while retaining 98% of the original accuracy on the RealWorldQA dataset. This work demonstrates the potential of event-based vision priors for improving VLM inference efficiency, paving the way for creating more efficient and deployable VLMs for sustainable visual understanding at the edge.

cs.CV↗

arXiv2025

Self-Sustaining Multi-Sensor LoRa-Based Activity Monitoring for Community Workout Parks

With the rise of the Internet of Things (IoT), more sensors are deployed around us, covering a wide range of applications from industry and agriculture to urban environments such as smart cities. Throughout these applications the sensors collect data of various characteristics and support city planners and decision-makers in their work processes, ultimately maximizing the impact of public funds. This paper introduces the design and implementation of a self-sustaining wireless sensor node designed to continuously monitor the utilization of community street workout parks. The proposed sensor node monitors activity by leveraging acceleration data capturing micro-vibrations that propagate through the steel structures of the workout equipment. This allows us to detect activity duration with an average measured error of only 2.8 seconds. The sensor is optimized with an energy-aware, adaptive sampling and transmission algorithm which, in combination with the Long Range Wide Area Network (LoRaWAN), reduces power consumption to just 1.147 mW in normal operation and as low as 0.712 mW in low-power, standby mode allowing 46 days of battery runtime. In addition, the integrated energy-harvesting circuit was tested in the field. By monitoring the battery voltage for multiple days, it was shown that the sensor is capable of operating sustainably year-round without external power sources. To evaluate the sensor effectiveness, we conducted a week-long field test in Zurich, placing sensors at various street workout parks throughout the city. Analysis of the collected data revealed clear patterns in park usage depending on day and location. This dataset is made publicly available through our online dashboard. Finally, we showcase the potential of IoT for city applications in combination with an accessible data interface for decision-makers.

cs.NI↗

arXiv2025

WakeMod: A 6.9uW Wake-Up Radio Module with -72.6dBm Sensitivity for On-Demand IoT

Large-scale Internet of Things (IoT) applications, such as asset tracking and remote sensing, demand multi-year battery lifetimes to minimize maintenance and operational costs. Traditional wireless protocols often employ duty cycling, introducing a tradeoff between latency and idle consumption - both unsuitable for event-driven and ultra-low power systems. A promising approach to address these issues is the integration of always-on wake-up radios (WuRs). They provide asynchronous, ultra-low power communication to overcome these constraints. This paper presents WakeMod, an open-source wake-up transceiver module for the 868MHz ISM band. Designed for easy integration and ultra-low power consumption, it leverages the -75dBm sensitive FH101RF WuR. WakeMod achieves a low idle power consumption of 6.9uW while maintaining responsiveness with a sensitivity of -72.6dBm. Reception of a wake-up call is possible from up to 130m of distance with a -2.1dBi antenna, consuming 17.7uJ with a latency below 54.3ms. WakeMod's capabilities have further been demonstrated in an e-ink price tag application, achieving 7.17uW idle consumption and enabling an estimated 8-year battery life with daily updates on a standard CR2032 coin cell. WakeMod offers a practical solution for energy-constrained, long-term IoT deployments, requiring low-latency, and on-demand communication.

cs.NI↗

arXiv2025

Fully Onboard SLAM for Distributed Mapping with a Swarm of Nano-Drones

The use of Unmanned Aerial Vehicles (UAVs) is rapidly increasing in applications ranging from surveillance and first-aid missions to industrial automation involving cooperation with other machines or humans. To maximize area coverage and reduce mission latency, swarms of collaborating drones have become a significant research direction. However, this approach requires open challenges in positioning, mapping, and communications to be addressed. This work describes a distributed mapping system based on a swarm of nano-UAVs, characterized by a limited payload of 35 g and tightly constrained onboard sensing and computing capabilities. Each nano-UAV is equipped with four 64-pixel depth sensors that measure the relative distance to obstacles in four directions. The proposed system merges the information from the swarm and generates a coherent grid map without relying on any external infrastructure. The data fusion is performed using the iterative closest point algorithm and a graph-based simultaneous localization and mapping algorithm, running entirely onboard the UAV's low-power ARM Cortex-M microcontroller with just 192 kB of memory. Field results gathered in three different mazes with a swarm of up to 4 nano-UAVs prove a mapping accuracy of 12 cm and demonstrate that the mapping time is inversely proportional to the number of agents. The proposed framework scales linearly in terms of communication bandwidth and onboard computational complexity, supporting communication between up to 20 nano-UAVs and mapping of areas up to 180 m2 with the chosen configuration requiring only 50 kB of memory.

cs.RO↗

arXiv2025

DTR: Delaunay Triangulation-based Racing for Scaled Autonomous Racing

Reactive controllers for autonomous racing avoid the computational overhead of full ee-Think-Act autonomy stacks by directly mapping sensor input to control actions, eliminating the need for localization and planning. A widely used reactive strategy is FTG, which identifies gaps in LiDAR range measurements and steers toward a chosen one. While effective on fully bounded circuits, FTG fails in scenarios with incomplete boundaries and is prone to driving into dead-ends, known as FTG-traps. This work presents DTR, a reactive controller that combines Delaunay triangulation, from raw LiDAR readings, with track boundary segmentation to extract a centerline while systematically avoiding FTG-traps. Compared to FTG, the proposed method achieves lap times that are 70\% faster and approaches the performance of map-dependent methods. With a latency of 8.95 ms and CPU usage of only 38.85\% on the robot's OBC, DTR is real-time capable and has been successfully deployed and evaluated in field experiments.

cs.RO↗

arXiv2025

AniTrack: A Power-Efficient, Time-Slotted and Robust UWB Localization System for Animal Tracking in a Controlled Setting

Accurate localization is essential for a wide range of applications, including asset tracking, smart agriculture, and animal monitoring. While traditional localization methods, such as Global Navigation Satellite System (GNSS), Wi-Fi, and Bluetooth Low Energy (BLE), offer varying levels of accuracy and coverage, they have drawbacks regarding power consumption, infrastructure requirements, and deployment flexibility. Ultra-Wideband (UWB) is emerging as an alternative, offering centimeter-level accuracy and energy efficiency, especially suitable for medium to large field monitoring with capabilities to work indoors and outdoors. However, existing UWB localization systems require infrastructure with mains power to supply the anchors, which impedes their scalability and ease of deployment. This underscores the need for a fully battery-powered and energy-efficient localization system. This paper presents an energy-optimized, battery-operated UWB localization system that leverages Long Range Wide Area Network (LoRaWAN) for data transmission to a server backend. By employing single-sided two-way ranging (SS-TWR) in a time-slotted localization approach, the power consumption both on the anchor and the tag is reduced, while maintaining high accuracy. With a low average power consumption of 20.44 mW per anchor and 7.19 mW per tag, the system allows fully battery-powered operation for up to 25 days, achieving average accuracy of 13.96 cm with self-localizing anchors on a 600 m2 testing ground. To validate its effectiveness and ease of installation in a challenging application scenario, ten anchors and two tags were successfully deployed in a tropical zoological biome where they could be used to track Aldabra Giant Tortoises (Aldabrachelys gigantea).

cs.RO↗

arXiv2025

GWQ: Gradient-Aware Weight Quantization for Large Language Models

Large language models (LLMs) show impressive performance in solving complex language tasks. However, its large number of parameters presents significant challenges for the deployment. So, compressing LLMs to low bits can enable to deploy on resource-constrained devices. To address this problem, we propose gradient-aware weight quantization (GWQ), the first quantization approach for low-bit weight quantization that leverages gradients to localize outliers, requiring only a minimal amount of calibration data for outlier detection. GWQ retains the top 1\% outliers preferentially at FP16 precision, while the remaining non-outlier weights are stored in a low-bit. We widely evaluate GWQ on different task include language modeling, grounding detection, massive multitask language understanding and vision-language question and answering. Results show that models quantified by GWQ performs better than other quantization method. During quantization process, GWQ only need one calibration set to realize effective quant. Also, GWQ achieves 1.2x inference speedup in comparison to the original model and effectively reduces the inference memory.

cs.LG↗

arXiv2025

Q-VDiT: Towards Accurate Quantization and Distillation of Video-Generation Diffusion Transformers

Diffusion transformers (DiT) have demonstrated exceptional performance in video generation. However, their large number of parameters and high computational complexity limit their deployment on edge devices. Quantization can reduce storage requirements and accelerate inference by lowering the bit-width of model parameters. Yet, existing quantization methods for image generation models do not generalize well to video generation tasks. We identify two primary challenges: the loss of information during quantization and the misalignment between optimization objectives and the unique requirements of video generation. To address these challenges, we present Q-VDiT, a quantization framework specifically designed for video DiT models. From the quantization perspective, we propose the Token-aware Quantization Estimator (TQE), which compensates for quantization errors in both the token and feature dimensions. From the optimization perspective, we introduce Temporal Maintenance Distillation (TMD), which preserves the spatiotemporal correlations between frames and enables the optimization of each frame with respect to the overall video context. Our W3A6 Q-VDiT achieves a scene consistency of 23.40, setting a new benchmark and outperforming current state-of-the-art quantization methods by 1.9$\times$. Code will be available at https://github.com/cantbebetter2/Q-VDiT.

cs.CV↗

arXiv2025

NanoSLAM: Enabling Fully Onboard SLAM for Tiny Robots

Perceiving and mapping the surroundings are essential for enabling autonomous navigation in any robotic platform. The algorithm class that enables accurate mapping while correcting the odometry errors present in most robotics systems is Simultaneous Localization and Mapping (SLAM). Today, fully onboard mapping is only achievable on robotic platforms that can host high-wattage processors, mainly due to the significant computational load and memory demands required for executing SLAM algorithms. For this reason, pocket-size hardware-constrained robots offload the execution of SLAM to external infrastructures. To address the challenge of enabling SLAM algorithms on resource-constrained processors, this paper proposes NanoSLAM, a lightweight and optimized end-to-end SLAM approach specifically designed to operate on centimeter-size robots at a power budget of only 87.9 mW. We demonstrate the mapping capabilities in real-world scenarios and deploy NanoSLAM on a nano-drone weighing 44 g and equipped with a novel commercial RISC-V low-power parallel processor called GAP9. The algorithm is designed to leverage the parallel capabilities of the RISC-V processing cores and enables mapping of a general environment with an accuracy of 4.5 cm and an end-to-end execution time of less than 250 ms.

cs.RO↗

arXiv2025

SliM-LLM: Salience-Driven Mixed-Precision Quantization for Large Language Models

Post-training quantization (PTQ) is an effective technique for compressing large language models (LLMs). However, while uniform-precision quantization is computationally efficient, it often compromises model performance. To address this, we propose SliM-LLM, a salience-driven mixed-precision quantization framework that allocates bit-widths at the group-wise. Our approach leverages the observation that important weights follow a structured distribution and introduces two key components: \textbf{1)} \textit{Salience-Determined Bit Allocation} adaptively assigns bit-widths to groups within each layer based on their salience; and \textbf{2)} \textit{Salience-Weighted Quantizer Calibration} optimizes quantizer parameters by incorporating element-level salience. With its structured partitioning, SliM-LLM provides a hardware-friendly solution that matches the efficiency of uniform quantization methods while improving accuracy. Experiments show that SliM-LLM achieves superior performance across various LLMs at low bit-widths. For example, a 2-bit quantized LLaMA-7B model reduces memory usage by nearly 6x compared to the floating-point baseline, decreases perplexity by 48\% compared to state-of-the-art gradient-free PTQ methods, and maintains GPU inference speed. Additionally, the extended version, SliM-LLM$^+$, which incorporates gradient-based quantization, further reduces perplexity by 35.1\%. Our code is available at https://github.com/Aaronhuang-778/SliM-LLM

cs.LG↗

arXiv2025

Towards Low-Latency Event-based Obstacle Avoidance on a FPGA-Drone

This work quantitatively evaluates the performance of event-based vision systems (EVS) against conventional RGB-based models for action prediction in collision avoidance on an FPGA accelerator. Our experiments demonstrate that the EVS model achieves a significantly higher effective frame rate (1 kHz) and lower temporal (-20 ms) and spatial prediction errors (-20 mm) compared to the RGB-based model, particularly when tested on out-of-distribution data. The EVS model also exhibits superior robustness in selecting optimal evasion maneuvers. In particular, in distinguishing between movement and stationary states, it achieves a 59 percentage point advantage in precision (78% vs. 19%) and a substantially higher F1 score (0.73 vs. 0.06), highlighting the susceptibility of the RGB model to overfitting. Further analysis in different combinations of spatial classes confirms the consistent performance of the EVS model in both test data sets. Finally, we evaluated the system end-to-end and achieved a latency of approximately 2.14 ms, with event aggregation (1 ms) and inference on the processing unit (0.94 ms) accounting for the largest components. These results underscore the advantages of event-based vision for real-time collision avoidance and demonstrate its potential for deployment in resource-constrained environments.

cs.CV↗

arXiv2025

RGB-Event Fusion with Self-Attention for Collision Prediction

Ensuring robust and real-time obstacle avoidance is critical for the safe operation of autonomous robots in dynamic, real-world environments. This paper proposes a neural network framework for predicting the time and collision position of an unmanned aerial vehicle with a dynamic object, using RGB and event-based vision sensors. The proposed architecture consists of two separate encoder branches, one for each modality, followed by fusion by self-attention to improve prediction accuracy. To facilitate benchmarking, we leverage the ABCD [8] dataset collected that enables detailed comparisons of single-modality and fusion-based approaches. At the same prediction throughput of 50Hz, the experimental results show that the fusion-based model offers an improvement in prediction accuracy over single-modality approaches of 1% on average and 10% for distances beyond 0.5m, but comes at the cost of +71% in memory and + 105% in FLOPs. Notably, the event-based model outperforms the RGB model by 4% for position and 26% for time error at a similar computational cost, making it a competitive alternative. Additionally, we evaluate quantized versions of the event-based models, applying 1- to 8-bit quantization to assess the trade-offs between predictive performance and computational efficiency. These findings highlight the trade-offs of multi-modal perception using RGB and event-based cameras in robotic applications.

cs.RO↗

arXiv2025

Planar Velocity Estimation for Fast-Moving Mobile Robots Using Event-Based Optical Flow

Accurate velocity estimation is critical in mobile robotics, particularly for driver assistance systems and autonomous driving. Wheel odometry fused with Inertial Measurement Unit (IMU) data is a widely used method for velocity estimation; however, it typically requires strong assumptions, such as non-slip steering, or complex vehicle dynamics models that do not hold under varying environmental conditions like slippery surfaces. We introduce an approach to velocity estimation that is decoupled from wheel-to-surface traction assumptions by leveraging planar kinematics in combination with optical flow from event cameras pointed perpendicularly at the ground. The asynchronous micro-second latency and high dynamic range of event cameras make them highly robust to motion blur, a common challenge in vision-based perception techniques for autonomous driving. The proposed method is evaluated through in-field experiments on a 1:10 scale autonomous racing platform and compared to precise motion capture data, demonstrating not only performance on par with the state-of-the-art Event-VIO method but also a 38.3 % improvement in lateral error. Qualitative experiments at highway speeds of up to 32 m/s further confirm the effectiveness of our approach, indicating significant potential for real-world deployment.

cs.RO↗

arXiv2025

Drive Fast, Learn Faster: On-Board RL for High Performance Autonomous Racing

Autonomous racing presents unique challenges due to its non-linear dynamics, the high speed involved, and the critical need for real-time decision-making under dynamic and unpredictable conditions. Most traditional Reinforcement Learning (RL) approaches rely on extensive simulation-based pre-training, which faces crucial challenges in transfer effectively to real-world environments. This paper introduces a robust on-board RL framework for autonomous racing, designed to eliminate the dependency on simulation-based pre-training enabling direct real-world adaptation. The proposed system introduces a refined Soft Actor-Critic (SAC) algorithm, leveraging a residual RL structure to enhance classical controllers in real-time by integrating multi-step Temporal-Difference (TD) learning, an asynchronous training pipeline, and Heuristic Delayed Reward Adjustment (HDRA) to improve sample efficiency and training stability. The framework is validated through extensive experiments on the F1TENTH racing platform, where the residual RL controller consistently outperforms the baseline controllers and achieves up to an 11.5 % reduction in lap times compared to the State-of-the-Art (SotA) with only 20 min of training. Additionally, an End-to-End (E2E) RL controller trained without a baseline controller surpasses the previous best results with sustained on-track learning. These findings position the framework as a robust solution for high-performance autonomous racing and a promising direction for other real-time, dynamic autonomous systems.

cs.RO↗

arXiv2025

Efficient Continual Learning in Keyword Spotting using Binary Neural Networks

Keyword spotting (KWS) is an essential function that enables interaction with ubiquitous smart devices. However, in resource-limited devices, KWS models are often static and can thus not adapt to new scenarios, such as added keywords. To overcome this problem, we propose a Continual Learning (CL) approach for KWS built on Binary Neural Networks (BNNs). The framework leverages the reduced computation and memory requirements of BNNs while incorporating techniques that enable the seamless integration of new keywords over time. This study evaluates seven CL techniques on a 16-class use case, reporting an accuracy exceeding 95% for a single additional keyword and up to 86% for four additional classes. Sensitivity to the amount of training samples in the CL phase, and differences in computational complexities are being evaluated. These evaluations demonstrate that batch-based algorithms are more sensitive to the CL dataset size, and that differences between the computational complexities are insignificant. These findings highlight the potential of developing an effective and computationally efficient technique for continuously integrating new keywords in KWS applications that is compatible with resource-constrained devices.

cs.LG↗