arXiv subjects

Michele Magno

Publications and source records attributed to Michele Magno.

At least 37 records · Page 2Linked to original sources

arXiv2026

WorldCache: Accelerating World Models for Free via Heterogeneous Token Caching

Diffusion-based world models have shown strong potential for unified world simulation, but the iterative denoising remains too costly for interactive use and long-horizon rollouts. While feature caching can accelerate inference without training, we find that policies designed for single-modal diffusion transfer poorly to world models due to two world-model-specific obstacles: \emph{token heterogeneity} from multi-modal coupling and spatial variation, and \emph{non-uniform temporal dynamics} where a small set of hard tokens drives error growth, making uniform skipping either unstable or overly conservative. We propose \textbf{WorldCache}, a caching framework tailored to diffusion world models. We introduce \textit{Curvature-guided Heterogeneous Token Prediction}, which uses a physics-grounded curvature score to estimate token predictability and applies a Hermite-guided damped predictor for chaotic tokens with abrupt direction changes. We also design \textit{Chaotic-prioritized Adaptive Skipping}, which accumulates a curvature-normalized, dimensionless drift signal and recomputes only when bottleneck tokens begin to drift. Experiments on diffusion world models show that WorldCache delivers up to \textbf{3.7$\times$} end-to-end speedups while maintaining \textbf{98\%} rollout quality, demonstrating the vast advantages and practicality of WorldCache in resource-constrained scenarios. Our code is released in https://github.com/FofGofx/WorldCache.

cs.CV↗

arXiv2026

Exploiting In-Sensor Computing for Energy-Efficient Earth Observation

The rapid growth of the satellite industry has driven a significant increase in geospatial data acquisition, highlighting a critical bottleneck: the severe disparity between the volume of collected sensor data and the limited downlink bandwidth available to ground stations. While On-Board Computing (OBC) has helped address this by pre-processing data in orbit, this article further advances the paradigm by introducing an in-sensor computing framework. We present an optimized end-to-end Earth Observation (EO) pipeline tailored for strict computational constraints by integrating TinyML techniques with the Sony IMX500 Intelligent Vision Sensor. Specifically, our approach shifts processing directly to the sensor level, offloading the computation from the primary embedded device, and effectively mitigating the downlink transmission of noisy or irrelevant data. We evaluated several efficient Convolutional Neural Networks (ConvNets), i.e., SqueezeNet, ShuffleNetV2, and MCUNetV1, on the EuroSAT dataset. Experimental results show that, despite the optimizations required for deployment on the IMX500 platform, our models maintain a competitive 96.68% accuracy while operating within its 8 MB constraints. Specifically, the models reach an average processing throughput of 17.40 FPS with a latency of 27.43 ms. Furthermore, our system profile exhibits high energy efficiency, with a low energy footprint of 14.19 mJ per inference and an efficiency rating of 42.26 GMAC/J, demonstrating its viability for in-sensor deployment.

cs.CV↗

arXiv2026

Event-Based Vision in Space: Applications, Trends, and Future Directions

Earth Observation (EO) is undergoing a significant transformation driven by the deployment of novel sensing technologies. Traditional frame-based optical sensors often struggle with motion blur, high power consumption, and extreme data redundancy in challenging orbital environments. In contrast, event-based sensors, also known as neuromorphic cameras, offer a bio-inspired asynchronous approach. By capturing only local illumination changes, they provide microsecond temporal resolution, an extremely high dynamic range, and exceptional energy efficiency. Although the use of these sensors is rapidly expanding from terrestrial systems to orbital platforms, the scientific literature surrounding their space-based applications remains heavily fragmented. To bridge this gap, this article presents a comprehensive review of the state-of-the-art in event-based vision in the space domain. Based on the retrieved literature, we introduce a taxonomy structured around four primary domains: 1) atmospheric and high-speed observation; 2) environmental monitoring and change detection; 3) operational support and onboard processing; and 4) geospatial modeling and predictive analysis. As a result, this survey highlights that neuromorphic engineering is far more than a supplementary imaging technique; it is a paradigm shift that can be used to directly address critical bottlenecks in modern remote sensing and sustainable space exploration.

cs.CV↗

arXiv2026

ChronosAD: Leveraging Time Series Foundation Models for Accurate Anomaly Detection

Time series anomaly detection is a crucial task in various domains, including finance, healthcare, and industry. However, existing methods often struggle to generalize across different datasets, especially when anomalies are subtle or context-dependent. To solve this issue, we introduce ChronosAD, a novel architecture for anomaly detection that uses a time series foundation model as a feature extractor. Specifically, it employs a two-stage pipeline: first, it uses the foundation model to extract embeddings for each time series in a zero-shot manner. Then, a custom-developed Temporal Block, composed of Bidirectional Long Short-Term Memory (BiLSTM) and Multi-Head Attention, refines these embeddings to capture temporal dependencies and highlight salient patterns. Unlike previous approaches, our model requires minimal task-specific tuning and demonstrates robust generalization across a wide range of domains, including industrial, medical, cyber-physical, and automotive systems. Extensive experiments on 11 benchmarks show that ChronosAD outperforms existing methods by 4.72% in AUC and 6.60% in AP on average. The source code is available at https://github.com/intelligolabs/ChronosAD.

cs.LG↗

arXiv2026

QuantSR+: Pushing the Limit of Quantized Image Super-Resolution Networks

Low-bit quantization is widely used to compress super-resolution (SR) models and reduce storage and computation costs for deployment on resource-limited devices. However, when SR models are pushed to ultra-low precision (2-4 bits), performance can drop sharply due to diminished representational capacity and the detail-sensitive nature of SR. To address these issues, we propose QuantSR+, a unified framework that improves quantization operators, network design, and training optimization, achieving better trade-offs between accuracy and efficiency than prior low-bit SR methods. QuantSR+ mainly relies on three technical contributions: (1) Redistribution-driven Bit Determination (RBD), which reshapes quantization distributions in both forward and backward passes to preserve representation fidelity; (2) Quantized Slimmable Architecture (QSA), which begins with an over-parameterized model and progressively prunes less critical blocks to meet efficiency budgets while pushing the accuracy performance; and (3) Slimming-guided Function-localized Distillation (SFD), which enforces block-aware feature alignment via a direct loss and a progressive, function-local training schedule to capture quantization effects better and speed up convergence. Extensive experiments show that QuantSR+ achieves state-of-the-art performance against both specialized quantized SR methods and generic quantization approaches. For SwinIR-S on Urban100 (x4), it improves PSNR by 0.29 dB over the 2-bit SOTA baseline. Meanwhile, it delivers strong efficiency gains at 2-bit, reducing operations by up to 87.9% and storage by 89.4%. QuantSR+ is effective for both convolutional and transformer-based SR models, indicating broad applicability.

cs.CV↗

arXiv2026

FTerViT: Fully Ternary Vision Transformer

Ternary Vision Transformers offer substantial model compression, however state-of-the-art methods only ternarize the encoder layers, leaving patch embeddings, LayerNorm parameters, and classifier heads in full precision. In compact models targeting resource-constrained processors, such as microcontrollers, these remaining full-precision components determine the total memory footprint, severely limiting deployment efficiency and on-device feasibility. In this work, we introduce a fully ternarized Vision Transformer in which \emph{all} weight matrices and normalization parameters are ternarized (FTerViT). To this end, we introduce two novel operators : TernaryBitConv2d with per-channel scaling for patch embedding and TernaryLayerNorm. FTerViT is trained using knowledge distillation, followed by a lightweight quantization-aware recovery phase. Our ternary W2A8 DeiT-III-S at 384$\times$384 resolution achieves 82.43\% ImageNet-1K top-1 at 6.09\,MB (${\sim}$15$\times$ compression, $-$2.42\,pp vs.\ FP32), outperforming prior ternary ViTs methods up to 8 pp. Finally, we demonstrate the first implementation of ternary vision transformers on a dual cores XTensa LX7 microcontroller inside the ESP32-S3 system-on-chip. By deploying FTerViT-Small (based on DeiT-III-Small at 224$\times$224 resolution, 5.81\,MB), we achieve 79.64\% ImageNet-1K top-1 accuracy.

cs.CV↗

arXiv2026

Cracks in the Foundation: A Civil Infrastructure Dataset to Challenge Vision Foundation Models

Automated structural health monitoring is essential to prevent catastrophic infrastructure failures. Precise, pixel-level defect segmentation is needed to accurately assess structural integrity, but progress in defect segmentation for civil infrastructures has been held back by an extreme scarcity of data, which requires costly expert annotation. The need for data is accentuated by algorithmic hurdles intrinsic to the problem, including center-bias and the need to rely more on shape when inspecting nearly textureless building materials. To remove the bottleneck, we introduce Cracks in the Foundation (CiF), the largest and most detailed civil infrastructure (instance) segmentation dataset to date, comprising $\approx$150,000 high-resolution images meticulously curated over five years in collaboration with civil engineering experts. With the help of this unprecedented data source, we expose a blind spot of current visual AI: despite the advent of promptable Foundation Models (FMs) and Vision Language Models (VLMs), and despite the impressive abilities of today's specialised segmentation models, it turns out that dense image understanding in the built environment is nowhere near solved. Our evaluations indicate that even the most recent zero-shot FMs face significant challenges when deployed on real-world infrastructure and even the performance of specialised models with domain-specific supervision plateaus at $\approx$25% mAP. CiF establishes inspection of civil infrastructure, an elementary and seemingly easy perceptual task, as an open challenge that reveals fundamental weaknesses of present-day models trained predominantly on internet images, literally and figuratively highlighting cracks in the current foundation model paradigm.

cs.CV↗

arXiv2026

OpenWatch: A Multimodal Benchmark for Hand Gesture Recognition on Smartwatches

Despite widespread adoption of smartwatches worldwide, open-benchmarks for wrist-based gesture recognition remain surprisingly limited. In this work, we introduce the first open-access multi-modal benchmark, OpenWatch, for wrist-based gesture recognition using synchronized inertial and physiological sensing on a commercial smartwatch. It contains over 10 hours of Inertial Measurement Unit (IMU) and Photoplethysmography (PPG) data across 50 participants and a vocabulary of 59 labelled gesture sequences. Furthermore, we present a subject-independent evaluation protocol including traditional and deep learning methods for time-series classification. On top of this, we develop two novel methodologies for hand-gesture recognition: (i) MixToken, a task-specific mixture-of-experts that fuses per-channel IMU filterbank features with cross-channel statistical tokens through learned logit mixing, and (ii) NormWear-Lora, a low-rank adaptation module for smartwatch foundation models. Our benchmarking results reveal that PPG signals carries a substantial predictive benefit (+12.5% F1-score) for foundational smartwatch models. In addition, we show that task-specific architectures (i.e. MixToken) substantially outperforms finetuned smartwatch foundation models in terms of accuracy (F1-score=90% vs 66%) and memory efficiency (223k vs 136M parameters). Finally, we also provide clear empirical guidance on the trade-offs between specialized architecture design, modality fusion, data augmentations, and foundation-model adaptation for resource-constrained wearable sensing.

cs.HC↗

arXiv2026

A Time-Synchronized Video Reference System for Data Analysis of Body-Attached Sensor Nodes in Outdoor Scenarios

Wearable body-attached multi-sensor systems enable detailed analysis of human motion and physiological signals in sports, rehabilitation, and movement research. While wireless synchronization techniques can reliably align sensor data streams, interpreting and validating complex or unconstrained activities often requires an additional, objective visual reference. Existing laboratory-grade reference systems provide high accuracy but are impractical for outdoor or field deployments. In contrast, commercial video timecode solutions typically rely on local device-to-device synchronization, which increases the power required to maintain synchronization. This is not desirable in many application scenarios. This paper presents a lightweight Timecode Generator (TCG) that converts Global Navigation Satellite System (GNSS)-derived time directly into a Linear Timecode (LTC) signal that is injected into the recording via a camera audio channel. The approach eliminates continuous handshaking, allowing the system to be activated immediately before the action of interest, thus reducing power consumption and enabling smaller batteries and unobtrusive hardware designs of body-attached sensor nodes. The TCG supports common video frame rates of 24, 25, and 30 frames per second (fps). Experimental evaluation confirms that accurate time alignment is maintained for several minutes without GNSS updates. At 30 fps, the alignment duration is 543 s before a potential frame-level shift occurs. With an average power consumption of 35.37 mW, the system achieves an operating time of up to 75 h when powered by two standard AAA alkaline batteries.

eess.SP↗

arXiv2026

A Miniaturized In-Mouth pH Sensing System for Real-Time Intraoral Telemetry

Dental caries is one of the most common chronic diseases worldwide, caused by acid production from bacterial metabolism of fermentable carbohydrates and affecting people of all ages. To evaluate the cariogenic and erosive properties of widely consumed food products, such as energy drinks, intraoral pH changes are measured during consumption. The gold standard for such measurements is miniaturized silicon-lithium-barium glass membrane electrodes. These electrodes allow dental plaque to form on their surface, thereby enabling in situ monitoring of pH changes in a biologically relevant environment. Due to their high impedance and susceptibility to external interference, they can currently only be measured using a large analog amplification and recording unit, which is highly limiting for study design and participant comfort, as individual measurements can take upwards of an hour. This work presents the first battery-powered, low power wireless and wearable pH telemetry evaluation system designed for real time intraoral pH monitoring with glass electrodes. The system comprises a miniaturized pH telemetry frontend, a neck-worn Bluetooth Low Energy (BLE) node, and software tools for data acquisition, visualization, and reporting. The front end integrates with a custom dental prosthesis, directly digitizing the pH signal in the mouth and minimizing noise. The data is transmitted over BLE to a host computer, and analyzed using dedicated software that supports calibration, drift compensation, region marking, and PDF report generation. The system integrates an 8.6 by 3.3 mm, 0.2 g pH front-end and a 37.6 g neck-worn BLE node which consume 8.89 mW to transmit data at 10 Hz to a host computer during a measurement.

eess.SP↗

arXiv2026

A Class AAA Solar Testbed for Reproducible Long-Term Characterization of Energy-Harvesting Systems

Energy harvesting promises maintenance-free operation of wireless sensor nodes but introduces strong dependencies on stochastic and deployment-specific environmental conditions. In particular, solar-powered systems are highly sensitive to variations in irradiance and spectral composition, which complicates system-level design, parameter tuning, and reliable verification. This work presents a solar testbed in which active control via Hardware-in-the-Loop (HIL) enables stable and repeatable illumination conditions for evaluating ultra-low-power energy harvesting systems. The proposed LED-based solar testbed provides spectrally configurable illumination over a wide dynamic range, from 5.7 mW/m2 to 908 kW/m2. It achieves Class AAA performance according to IEC 60904-9, with a spectral match below 1.3% and a spatial non-uniformity below 1.28% over a 16.5 cm x 16.5 cm test area. The long-term irradiance instability remains below 0.6%. Closed-loop control using integrated illuminance and spectral sensors ensures high temporal stability, while a temperature-controlled DUT stage supports long-term experiments. Experimental results demonstrate high repeatability and suitability for systematic laboratory characterization of solar energy harvesting systems.

eess.SY↗

arXiv2026

TinyML Enhances CubeSat Mission Capabilities

Earth observation (EO) missions traditionally rely on transmitting raw or minimally processed imagery from satellites to ground stations for computationally intensive analysis. This paradigm is infeasible for CubeSat systems due to stringent constraints on the onboard embedded processors, energy availability, and communication bandwidth. To overcome these limitations, the paper presents a TinyML-based Convolutional Neural Networks (ConvNets) model optimization and deployment pipeline for onboard image classification, enabling accurate, energy-efficient, and hardware-aware inference under CubeSat-class constraints. Our pipeline integrates structured iterative pruning, post-training INT8 quantization, and hardware-aware operator mapping to compress models and align them with the heterogeneous compute architecture of the STM32N6 microcontroller from STMicroelectronics. This Microcontroller Unit (MCU) integrates a novel Arm Cortex-M55 core and a Neural-ART Neural Processing Unit (NPU), providing a realistic proxy for CubeSat onboard computers. The paper evaluates the proposed approach on three EO benchmark datasets (i.e., EuroSAT, RS_C11, MEDIC) and four models (i.e., SqueezeNet, MobileNetV3, EfficientNet, MCUNetV1). We demonstrate an average reduction in RAM usage of 89.55% and Flash memory of 70.09% for the optimized models, significantly decreasing downlink bandwidth requirements while maintaining task-acceptable accuracy (with a drop ranging from 0.4 to 8.6 percentage points compared to the Float32 baseline). The energy consumption per inference ranges from 0.68 mJ to 6.45 mJ, with latency spanning from 3.22 ms to 30.38 ms. These results fully satisfy the stringent energy budgets and real-time constraints required for efficient onboard EO processing.

cs.CV↗

arXiv2026

S$^2$Q-VDiT: Accurate Quantized Video Diffusion Transformer with Salient Data and Sparse Token Distillation

Diffusion transformers have emerged as the mainstream paradigm for video generation models. However, the use of up to billions of parameters incurs significant computational costs. Quantization offers a promising solution by reducing memory usage and accelerating inference. Nonetheless, we observe that the joint modeling of spatial and temporal information in video diffusion models (V-DMs) leads to extremely long token sequences, which introduces high calibration variance and learning challenges. To address these issues, we propose S$^2$Q-VDiT, a post-training quantization framework for V-DMs that leverages Salient data and Sparse token distillation. During the calibration phase, we identify that quantization performance is highly sensitive to the choice of calibration data. To mitigate this, we introduce \textit{Hessian-aware Salient Data Selection}, which constructs high-quality calibration datasets by considering both diffusion and quantization characteristics unique to V-DMs. To tackle the learning challenges, we further analyze the sparse attention patterns inherent in V-DMs. Based on this observation, we propose \textit{Attention-guided Sparse Token Distillation}, which exploits token-wise attention distributions to emphasize tokens that are more influential to the model's output. Under W4A6 quantization, S$^2$Q-VDiT achieves lossless performance while delivering $3.9\times$ model compression and $1.3\times$ inference acceleration. Code will be available at https://github.com/wlfeng0509/s2q-vdit.

cs.CV↗

arXiv2026

Quantized Visual Geometry Grounded Transformer

Learning-based 3D reconstruction models, represented by Visual Geometry Grounded Transformers (VGGTs), have made remarkable progress with the use of large-scale transformers. Their prohibitive computational and memory costs severely hinder real-world deployment. Post-Training Quantization (PTQ) has become a common practice for compressing and accelerating models. However, we empirically observe that PTQ faces unique obstacles when compressing billion-scale VGGTs: the data-independent special tokens induce heavy-tailed activation distributions, while the multi-view nature of 3D data makes calibration sample selection highly unstable. This paper proposes the first Quantization framework for VGGTs, namely QuantVGGT. This mainly relies on two technical contributions: First, we introduce Dual-Smoothed Fine-Grained Quantization, which integrates pre-global Hadamard rotation and post-local channel smoothing to mitigate heavy-tailed distributions and inter-channel variance robustly. Second, we design Noise-Filtered Diverse Sampling, which filters outliers via deep-layer statistics and constructs frame-aware diverse calibration clusters to ensure stable quantization ranges. Comprehensive experiments demonstrate that QuantVGGT achieves the state-of-the-art results across different benchmarks and bit-width, surpassing the previous state-of-the-art generic quantization method with a great margin. We highlight that our 4-bit QuantVGGT can deliver a 3.7$\times$ memory reduction and 2.5$\times$ acceleration in real-hardware inference, while maintaining reconstruction accuracy above 98\% of its full-precision counterpart. This demonstrates the vast advantages and practicality of QuantVGGT in resource-constrained scenarios. Our code is released in https://github.com/wlfeng0509/QuantVGGT.

cs.CV↗

arXiv2026

QuantSparse: Comprehensively Compressing Video Diffusion Transformer with Model Quantization and Attention Sparsification

Diffusion transformers exhibit remarkable video generation capability, yet their prohibitive computational and memory costs hinder practical deployment. Model quantization and attention sparsification are two promising directions for compression, but each alone suffers severe performance degradation under aggressive compression. Combining them promises compounded efficiency gains, but naive integration is ineffective. The sparsity-induced information loss exacerbates quantization noise, leading to amplified attention shifts. To address this, we propose \textbf{QuantSparse}, a unified framework that integrates model quantization with attention sparsification. Specifically, we introduce \textit{Multi-Scale Salient Attention Distillation}, which leverages both global structural guidance and local salient supervision to mitigate quantization-induced bias. In addition, we develop \textit{Second-Order Sparse Attention Reparameterization}, which exploits the temporal stability of second-order residuals to efficiently recover information lost under sparsity. Experiments on HunyuanVideo-13B demonstrate that QuantSparse achieves 20.88 PSNR, substantially outperforming the state-of-the-art quantization baseline Q-VDiT (16.85 PSNR), while simultaneously delivering a \textbf{3.68$\times$} reduction in storage and \textbf{1.88$\times$} acceleration in end-to-end inference. Our code will be released in https://github.com/wlfeng0509/QuantSparse.

cs.CV↗

arXiv2026

Performance Analysis of Edge and In-Sensor AI Processors: A Comparative Review

This review examines the rapidly evolving landscape of ultra-low-power edge processors, covering heterogeneous Systems-on-Chips (SoCs), neural accelerators, near-sensor and in-sensor architectures, and emerging dataflow and memory-centric designs. We categorize commercially available and research-grade platforms according to their compute paradigms, power envelopes, and memory hierarchies, and analyze their suitability for always-on and latency-critical Artificial Intelligence (AI) workloads. To complement the architectural overview with empirical evidence, we benchmark a 336 million Multiply-Accumulate (MAC) segmentation model (PicoSAM2) on three representative processors: GAP9, leveraging a multi-core RISC-V architecture augmented with hardware accelerators; the STM32N6, which pairs an advanced ARM Cortex-M55 core with a dedicated neural architecture accelerator; and the Sony IMX500, representing in-sensor stacked-Complementary Metal-Oxide-Semiconductor (CMOS) compute. Collectively, these platforms span MCU-class, embedded neural accelerator, and in-sensor paradigms. The evaluation reports latency, inference efficiency, energy efficiency, and energy-delay product. The results show a clear divergence in hardware behavior, with the IMX500 achieving the highest utilization (86.2 MAC/cycle) and the lowest energy-delay product, highlighting the growing significance and technological maturity of in-sensor processing. GAP9 offers the best energy efficiency within microcontroller-class power budgets, and the STM32N6 provides the lowest raw latency at a significantly higher energy cost. Together, the review and benchmarks provide a unified view of the current design directions and practical trade-offs that are shaping the next generation of ultra-low-power and in-sensor AI processors.

cs.AR↗

arXiv2026

Robust Reinforcement Learning-Based Locomotion for Resource-Constrained Quadrupeds with Exteroceptive Sensing

Compact quadrupedal robots are proving increasingly suitable for deployment in real-world scenarios. Their smaller size fosters easy integration into human environments. Nevertheless, real-time locomotion on uneven terrains remains challenging, particularly due to the high computational demands of terrain perception. This paper presents a robust reinforcement learning-based exteroceptive locomotion controller for resource-constrained small-scale quadrupeds in challenging terrains, which exploits real-time elevation mapping, supported by a careful depth sensor selection. We concurrently train both a policy and a state estimator, which together provide an odometry source for elevation mapping, optionally fused with visual-inertial odometry (VIO). We demonstrate the importance of positioning an additional time-of-flight sensor for maintaining robustness even without VIO, thus having the potential to free up computational resources. We experimentally demonstrate that the proposed controller can flawlessly traverse steps up to 17.5 cm in height and achieve an 80% success rate on 22.5 cm steps, both with and without VIO. The proposed controller also achieves accurate forward and yaw velocity tracking of up to 1.0 m/s and 1.5 rad/s respectively. We open-source our training code at github.com/ETH-PBL/elmap-rl-controller.

cs.RO↗

arXiv2026

LEVIO: Lightweight Embedded Visual Inertial Odometry for Resource-Constrained Devices

Accurate, infrastructure-less sensor systems for motion tracking are essential for mobile robotics and augmented reality (AR) applications. The most popular state-of-the-art visual-inertial odometry (VIO) systems, however, are too computationally demanding for resource-constrained hardware, such as micro-drones and smart glasses. This work presents LEVIO, a fully featured VIO pipeline optimized for ultra-low-power compute platforms, allowing six-degrees-of-freedom (DoF) real-time sensing. LEVIO incorporates established VIO components such as Oriented FAST and Rotated BRIEF (ORB) feature tracking and bundle adjustment, while emphasizing a computationally efficient architecture with parallelization and low memory usage to suit embedded microcontrollers and low-power systems-on-chip (SoCs). The paper proposes and details the algorithmic design choices and the hardware-software co-optimization approach, and presents real-time performance on resource-constrained hardware. LEVIO is validated on a parallel-processing ultra-low-power RISC-V SoC, achieving 20 FPS while consuming less than 100 mW, and benchmarked against public VIO datasets, offering a compelling balance between efficiency and accuracy. To facilitate reproducibility and adoption, the complete implementation is released as open-source.

cs.CV↗