arXiv subjects

Michal Hejduk

Publications and source records attributed to Michal Hejduk.

6 recordsLinked to original sources

arXiv2026

Theoretical Study of Classical Dynamics of Electron in Two-Frequency Paul Trap

We present a theoretical study of trapping an electron in a two-frequency Paul trap, motivated by future hybrid architecture consisting of a doubly charged calcium ion (Ca$^{2+}$) and an electron. By isolating the electron from ionic-electron interactions, we formulate the equations of motion for the electron in the time-dependent trap potentials and cast them in the Hill form. Stability and dynamics are then analysed in terms of the dimensionless q-parameters, which encode the applied voltages, drive frequencies, trap geometry, and the particle's charge-to-mass ratio. Under the combined action of the two radio-frequency fields, the trapped electron's classical motion is shown to be approximated well by a slow secular oscillation modulated by two distinct motion sidebands originating from the low- and high-frequency RF drives. The approximation method presented here enables a quick evaluation of the relation between the device-design q-parameters and the electron motion. It offers a crucial foundation for developing physical models of electron-ion interactions in electron-ion traps.

physics.atom-ph↗

arXiv2026

A 3D-Printed GHz Microwave-Resonator Paul Trap for Electron Confinement and Millisecond Spin-Qubit Coherence

We report a 3D-printed microwave-resonator Paul trap that operates at the GHz frequencies required for electron confinement while preserving an open geometry suitable for laser access and imaging ion Coulomb crystals. The resonator exhibits moderate quality factors of approximately 1000, enabling large confining electric-field amplitudes at low input power, and is in good agreement with finite-element-method (FEM) predictions despite manufacturing imperfections, which we experimentally characterize. The validated FEM model is then used to calculate the electromagnetic fields in the trapping region. These field distributions, together with surface-roughness measurements, are incorporated into a model of electron spin-qubit decoherence to estimate the coherence time. Our analysis predicts that electron spin-qubit coherence times on the order of 10 ms should be achievable under the assumption that motional heating is dominated by Johnson noise, making such systems relevant for quantum information processing. The method of obtaining the coherence time is applicable to any electron Paul trap.

quant-ph↗

arXiv2026

Verification and experimental validation of neutral atom beam source produced by L-PBF

We report validation tests of a calcium atomic-beam source fabricated via Laser Powder Bed Fusion (L-PBF). The surface quality and elemental composition of the printed component were quantitatively assessed, allowing us to establish reference parameters for reliable operation in an ultra-high-vacuum environment. Safe operating conditions of the atomic oven were determined through a combination of simulations and experimental measurements. The ability of the device to deliver an atomic beam to the main experimental region -- the electron/ion trap -- was verified using atomic fluorescence imaging. Fluorescence spectroscopy was further employed to characterize the beam divergence, yielding an emission-cone half-angle of approximately 19 degrees for atoms near the beam axis. A current of atoms on the order of $10^8$ s$^{-1}$ was estimated in the electron-trapping region, which is more than sufficient for anticipated electron-trapping and ion-trapping experiments.

physics.atom-ph↗

arXiv2025

3D-printed components for electron-ion trapping: Pre-experimental tests of functionality and ultra-high vacuum compatibility

We demonstrate the ultra-high vacuum compatibility of a microwave-driven electron trap and an atomic oven (for atomic beam generation) fabricated through 3D printing via Laser Powder Bed Fusion (L-PBF). The trap integrates into a coaxial microwave cavity, enabling stable, narrow-band, high-amplitude oscillations of the electric field at the electrodes. The design also supports simultaneous trapping of ions. The oven performs well in ultrahigh vacuum (UHV) environments without significant outgassing. In addition to achieving the UHV regime for 3D-printed components, pressure variations and their potential impact on electron-ion trapping experiments were investigated over a month. Our results show that experiments with electrons photodetached from trapped and laser-cooled ions are feasible with the trap and oven manufactured by the L-PBF method. These findings establish a foundation for future experiments in microwave detection and the study of low-energy ion-electron interactions at room temperature.

physics.atom-ph↗

arXiv2025

Roadmap to planar electron-ion point Paul trap

We present a technical guide to developing a quantum-mechanical system with co-trapped laser-cooled ions and electrons, aiming to utilize this mixed-species system in quantum computing and sensing. We outline a method to control the system's quantum state and provide a blueprint for a forward-compatible design for containing it. The proposed technical solution features a planar configuration with a large trapping volume located at a considerable height above the electrode plane. We detail a manufacturing method using copper-coated, laser-machined glass substrates suitable for a high-power microwave drive signal. We discuss electron state decoherence in this trap and suggest that using superconductive films could enhance trapping abilities, though initial experiments are feasible with the current design.

quant-ph↗

arXiv2025

Trapping of electrons and $^{40}\textrm{Ca}^+$ ions in a dual-frequency Paul trap

We demonstrate the operation of a dual-frequency Paul trap and characterize its performance by storing either electrons or calcium ions while applying two quadrupole fields simultaneously which oscillate at $Ω_\textrm{fast} = 2π\times 1.6$ GHz and $Ω_\textrm{slow} = 2π\times 2$ MHz. The particles are loaded and stored in the trap under various conditions followed by detection employing an electron multiplier tube. We find that tens of electrons or ions can be trapped for up to ten milliseconds and a small fraction remains trapped even after hundreds of milliseconds. During dual-frequency operation we find that while the number of trapped electrons rapidly decreases with increase of the $Ω_\textrm{slow}$ field amplitude, the number of trapped ions shows no dependence on the $Ω_\textrm{fast}$ field amplitude as supported by our extensive numerical simulations. We aim to use a similar trap for synthesising antihydrogen from antiprotons and positrons. Accordingly, we discuss open challenges such as the co-trapping of oppositely charged species and particle trap duration.

physics.atom-ph↗