arXiv subjects

Michael Waltl

Publications and source records attributed to Michael Waltl.

11 recordsLinked to original sources

arXiv2026

Towards ultra-scaled nanoelectronics using the zipper material system $Bi_2O_2Se/Bi_2SeO_5$

Two-dimensional (2D) materials could overcome the scaling bottleneck of nanoelectronics by enabling atomically thin channels, superior electrostatic control, and reduced short-channel effects. However, progress is limited by the lack of semiconductor–insulator interfaces being simultaneously scalable, stable, and reliable. Conventional 2D interfaces are often low quality or require transferring dissimilar materials, limiting reproducibility and scalability. We show that the zipper heterostructure formed by the high-mobility 2D semiconductor Bi 2 O 2 Se and its native high- κ oxide Bi 2 SeO 5 addresses these challenges, providing an atomically sharp, chemically matched interface with excellent electrostatics and promising scaling potential. We further present the first comprehensive multiscale assessment of Bi 2 O 2 Se/Bi 2 SeO 5 transistors targeting thermal stability, reliability, and scalability by linking atomic-scale structure and defects to device-level behavior across four transistor generations (top-gated, fin, and two gate-all-around architectures). Benchmarking against IRDS-2035 targets indicates that Bi 2 O 2 Se/Bi 2 SeO 5 devices could deliver high drive current with low gate leakage under aggressive scaling, potentially surpassing the targets in the upper-bound region of the sensitivity analysis. Finally, we identify oxygen-related oxide defects as the dominant origin of hysteresis consistent with a beneficial role of encapsulation and oxygen-rich annealing. Together, our findings support the potential of this zipper material system as a technologically-credible and manufacturing-relevant platform for future nanoelectronics.

cond-mat.mtrl-sci↗

arXiv2025

Investigation of Low Frequency Noise in CryoCMOS devices through Statistical Single Defect Spectroscopy

High 1/f noise in CryoCMOS devices is a critical parameter to keep under control in the design of complex circuits for low temperatures applications. Current models predict the 1/f noise to scale linearly with temperature, and gate oxide defects are expected to freeze out at cryogenic temperatures. Nevertheless, it has been repeatedly observed that 1/f noise deviates from the predicted behaviour and that gate oxide defects are still active around 4.2 K, producing random telegraph noise. In this paper, we probe single gate oxide defects in 2500 nMOS devices down to 5 K in order to investigate the origin of 1/f noise in CryoCMOS devices. From our results, it is clear that the number of defects active at cryogenic temperatures resulting in random telegraph noise is larger than at 300 K. Threshold voltage shifts due to charged defects are shown to be exponentially distributed, with different modalities across temperatures and biases: from monomodal at 300 K to trimodal below 100 K. The third mode is interpreted in the framework of percolation theory. By fitting these distributions, it is shown that more than 80% of the detected defects belongs to the oxide bulk. Afterwards, starting from the raw data in time domain, we reconstruct the low frequency noise spectra, highlighting the contributions of defects belonging to different branches and, therefore, to different oxide layers. This analysis shows that, although interface traps and large defects associated with the third mode are the main sources of 1/f noise at 5 K, bulk oxide defects still contribute significantly to low-frequency noise at cryogenic temperatures. Finally, we show that defect time constants and step heights are uncorrelated, proving that elastic tunnelling model for charge trapping is not accurate.

cond-mat.mes-hall↗

arXiv2025

Hysteresis Measurements as a Diagnostic Tool: A Systematic Approach for Stability Benchmarking and Performance Projection of 2D-Materials-Based MOSFETs

Judging by its omnipresence in the literature, the hysteresis observed in the transfer characteristics of emerging transistors based on 2D-materials is widely accepted as an important metric related to the device quality. The hysteresis is often reported with attributes like "negligible" or "small" without giving any specifics as to how this was determined and against what reference the measured values were compared to. Quite surprisingly, there appears to be only a fragmentary understanding of the mechanisms actually contributing to hysteresis and the sensitivity of the actual measurement on various experimental parameters. We attempt to close this gap by first providing a comprehensive theoretical analysis of the dominant mechanisms contributing to hysteresis: charge trapping by defects from the channel or the gate, the drift of mobile charges, and eventually ferroelectricity. We continue by suggesting methods to experimentally distinguishing between these phenomena. Based on these discussions it becomes clear that previously reported hysteresis values have little meaning as they have been non-systematically recorded under arbitrary conditions. In order to resolve this predicament, we propose a standardized hysteresis measurement scheme to establish the hysteresis as a comparable metric for the assessment of device stability. Our standardized scheme ensures that hysteresis data can be effectively compared across different technologies and, most importantly, provide a means to extrapolate data obtained on thicker prototypes to subnanometer equivalent oxide thicknesses. This facilitates the systematic benchmarking of insulator/channel combinations in terms of stability, which thereby enables the screening of material systems for more stable and reliable 2D-material-based MOSFETs.

physics.app-ph↗

arXiv2025

Influence of the Effective Mass on ab initio Phonon-limited Electron Mobility of GaAs

We present a comprehensive ab initio study of the influence of band structure corrections, particularly the electron effective mass, on the phonon-limited electron drift and Hall mobilities of GaAs. Our approach is based on the DFT+$U$ method, combined with an iterative solution of the linearized Boltzmann transport equation using the Wannier interpolation technique. We show how this framework allows for accurate refinements of the electronic band structure and phonon dispersion, leading to improved predictions for transport properties. In particular, by varying the Hubbard parameters to purposefully tune the conduction band features, allowing us to reproduce bands with different electron effective mass, we systematically investigate the relationship between mobility and effective mass. In this context, our results show close agreement with semi-empirical relations that follow a power-law dependence. Moreover, this approach can be used to indirectly incorporate temperature effects into the band structure, enabling efficient evaluation of temperature-dependent electron mobilities. Our mobility results exhibit good agreement with experimental data and are comparable to previously reported values obtained using the computationally expensive GW method.

cond-mat.mtrl-sci↗

arXiv2024

Time-Gated Optical Spectroscopy of Field-Effect Stimulated Recombination via Interfacial Point Defects in Fully-Processed Silicon Carbide Power MOSFETs

Fully-processed SiC power metal-oxide-semiconductor field-effect transistors (MOSFETs) emit light during switching of the gate terminal, while both drain and source terminals are grounded. The emitted photons are caused by defect-assisted recombination of electrons and holes at the 4H-SiC/SiO$_2$ interface and can be detected through the SiC substrate. Here, we present time-gated spectroscopic characterization of these interfacial point defects. Unlike in previous studies, the devices were opened in such a way that the drain-contact remained electrically active. A separate examination of the photons emitted at the rising and falling transitions of the gate-source voltage enabled the extraction of two different spectral components. One of these components consists of a single transition with phonon replicas of a local vibrational mode (LVM) with an astonishingly high energy of 220 meV $\unicode{x2013}$ well above the highest phonon modes in 4H-SiC and SiO$_2$ of 120 meV and 137 meV, respectively. Based on a quantum mechanical model, we successfully fitted its emission spectrum and assigned it to donor-acceptor pair recombination involving a carbon cluster-like defect. Other transitions were assigned to EH$_{6/7}$-assisted, EK$_2$-D, and nitrogen-aluminum donor-acceptor pair recombination. Due to the relevance of these defects in the operation of SiC MOSFETs, these novel insights will contribute to improved reliability and performance of these devices.

physics.app-ph↗

arXiv2023

Variability and Reliability of Graphene Field-Effect Transistors with CaF2 Insulators

Graphene is a promising material for applications as a channel in graphene field-effect transistors (GFETs) which may be used as a building block for optoelectronics, high-frequency devices and sensors. However, these devices require gate insulators which ideally should form atomically flat interfaces with graphene and at the same time contain small densities of traps to maintain high device stability. Previously used amorphous oxides, such as SiO2 and Al2O3, however, typically suffer from oxide dangling bonds at the interface, high surface roughness and numerous border oxide traps. In order to address these challenges, here we use for the first time 2nm thick epitaxial CaF2 as a gate insulator in GFETs. By analyzing device-to-device variability for over 200 devices fabricated in two batches, we find that tens of them show similar gate transfer characteristics. Our statistical analysis of the hysteresis up to 175C has revealed that while an ambient-sensitive counterclockwise hysteresis can be present in some devices, the dominant mechanism is thermally activated charge trapping by border defects in CaF2 which results in the conventional clockwise hysteresis. We demonstrate that both the hysteresis and bias-temperature instabilities in our GFETs with CaF2 are comparable to similar devices with SiO2 and Al2O3. In particular, we achieve a small hysteresis below 0.01 V for equivalent oxide thickness (EOT) of about 1 nm at the electric fields up to 15 MV/cm and sweep times in the kilosecond range. Thus, our results demonstrate that crystalline CaF2 is a promising insulator for highly-stable GFETs.

physics.app-ph↗

arXiv2022

Comphy v3.0 -- A Compact-Physics Framework for Modeling Charge Trapping Related Reliability Phenomena in MOS Devices

Charge trapping plays an important role for the reliability of electronic devices and manifests itself in various phenomena like bias temperature instability (BTI), random telegraph noise (RTN), hysteresis or trap-assisted tunneling (TAT). In this work we present Comphy v3.0, an open source physical framework for modeling these effects in a unified fashion using nonradiative multiphonon theory on a one-dimensional device geometry. Here we give an overview about the underlying theory, discuss newly introduced features compared to the original Comphy framework and also review recent advances in reliability physics enabled by these new features. The usefulness of Comphy v3.0 for the reliability community is highlighted by several practical examples including automatic extraction of defect distributions, modeling of TAT in high-k capacitors and BTI/RTN modeling at cryogenic temperatures.

physics.app-ph↗

arXiv2021

Optimizing the Stability of FETs Based on Two-Dimensional Materials by Fermi Level Tuning

Despite the enormous progress achieved during the past decade, nanoelectronic devices based on two-dimensional (2D) semiconductors still suffer from a limited electrical stability. This limited stability has been shown to result from the interaction of charge carriers originating from the 2D semiconductors with defects in the surrounding insulating materials. The resulting dynamically trapped charges are particularly relevant in field effect transistors (FETs) and can lead to a large hysteresis, which endangers stable circuit operation. Based on the notion that charge trapping is highly sensitive to the energetic alignment of the channel Fermi-level with the defect band in the insulator, we propose to optimize device stability by deliberately tuning the channel Fermi-level. Our approach aims to minimize the amount of electrically active border traps without modifying the total number of traps in the insulator. We demonstrate the applicability of this idea by using two differently doped graphene layers in otherwise identical FETs with Al$_2$O$_3$ as a gate oxide mounted on a flexible substrate. Our results clearly show that by increasing the distance of the Fermi-level to the defect band, the hysteresis is significantly reduced. Furthermore, since long-term reliability is also very sensitive to trapped charges, a corresponding improvement in reliability is both expected theoretically and demonstrated experimentally. Our study paves the way for the construction of more stable and reliable 2D FETs in which the channel material is carefully chosen and tuned to maximize the energetic distance between charge carriers in the channel and the defect bands in the insulator employed.

physics.app-ph↗

arXiv2020

On the suitability of hBN as an insulator for 2D material-based ultrascaled CMOS devices

Complementary metal oxide semiconductor (CMOS) logic circuits at the ultimate scaling limit place the utmost demands on the properties of all materials involved. The requirements for semiconductors are well explored and could possibly be satisfied by a number of layered two-dimensional (2D) materials, like for example transition-metal dichalcogenides or black phosphorus. The requirements for the gate insulator are arguably even more challenging and difficult to meet. In particular the combination of insulator to semiconductor which forms the central element of the metal oxide semiconductor field effect transistor (MOSFET) has to be of superior quality in order to build competitive devices. At the moment, hexagonal boron nitride (hBN) is the most common two-dimensional insulator and widely considered to be the most promising gate insulator in nanoscaled 2D material-based transistors. Here, we critically assess the material parameters of hBN and conclude that while its properties render hBN an ideal candidate for many applications in 2D nanoelectronics, hBN is most likely not suitable as a gate insulator for ultrascaled CMOS devices.

physics.app-ph↗

arXiv2019

Meeting the Scaling Challenge for Post-Silicon Nanoelectronics using CaF2 Insulators

Two-dimensional (2D) semiconductors have been suggested both for ultimately-scaled field-effect transistors (FETs) and More-than-Moore nanoelectronics. However, these targets can not be reached without accompanying gate insulators which are scalable into the nanometer regime. Despite the considerable progress in the search for channel materials with high mobilities and decent bandgaps, finding high-quality insulators compatible with 2D technologies has remained a challenge. Typically used oxides (e.g. SiO2, Al2O3 and HfO2) are amorphous when scaled, while two-dimensional hBN exhibits excessive gate leakages. To overcome this bottleneck, we extend the natural stacking properties of 2D heterostructures to epitaxial fluorite (CaF2), which forms a quasi van der Waals interface with 2D semiconductors. We report scalable single-layer MoS2 FETs with a crystalline CaF2 insulator of about 2 nm thickness, which corresponds to an equivalent oxide thickness of less than 1 nm. While meeting the stringent requirements of low leakage currents, our devices exhibit highly competitive performance and record-small hysteresis. As such, our results present a breakthrough for very large scale integration towards commercially competitive nano-electronic devices.

physics.app-ph↗

arXiv2014

NBTI in Nanoscale MOSFETs - The Ultimate Modeling Benchmark

After nearly half a century of research into the bias temperature instability (BTI), two classes of models have emerged as the strongest contenders: one class of models, the reaction-diffusion models, is built around the idea that hydrogen is released from the interface and that it is the diffusion of some form of hydrogen that controls both degradation and recovery. While many different variants of the reaction-diffusion idea have been published over the years, the most commonly used recent models are based on non-dispersive reaction rates and non- dispersive diffusion. The other class of models is based on the idea that degradation is controlled by first-order reactions with widely distributed (dispersive) reaction rates. We demonstrate that these two classes give fundamentally different predictions for the stochastic degradation and recovery of nanoscale devices, therefore providing the ultimate modeling benchmark. Using de- tailed experimental time-dependent defect spectroscopy (TDDS) data obtained on such nanoscale devices, we investigate the compatibility of these models with experiment. Our results show that the diffusion of hydrogen (or any other species) is unlikely to be the limiting aspect that determines degradation. On the other hand, the data are fully consistent with reaction-limited models. We finally argue that only the correct understanding of the physical mechanisms leading to the significant device-to-device variation observed in the degradation in nanoscale devices will enable accurate reliability projections and device optimization.

cond-mat.mes-hall↗