arXiv Science⌕ Search

arXiv subjects

Michael J. Probst

Publications and source records attributed to Michael J. Probst.

4 recordsLinked to original sources

Inverse Design for Nonplanar Conformal Layers

Conformal layering, where a deposited layer follows the nonplanar topography beneath it, arises from both deliberate passivation overlays and imperfect planarization between depositions. However, inverse design methods typically model planar, vertically extruded layers, resulting in geometric discrepancies between the modeled and fabricated structure. To address these discrepancies, we present differentiable mapping functions that incorporate both uniform conformal overlays and partially conformal interlayer dips into a standard inverse design paradigm, requiring no additional design parameters over planar structures. Using these mappings, we design (1) mode-selective GaAs grating reflectors with uniform conformal SiN passivation for high-aspect-ratio VCSELs, reaching differential modal reflectivities of 33.1% (single-etch) and 63.4% (dual-etch), and (2) a dual-layer silicon grating coupler whose upper layer dips up to 40 nm into the lower layer, reaching -0.75 dB coupling efficiency. Modeling conformal layering during optimization, rather than treating it as post-hoc fabrication error, permits direct exploitation of the conformal layering, yielding inherently fabricable and performant designs.

physics.optics↗

Integrated Photonic Topology Optimization with Nonvertical Sidewall Profiles: Applications in Lithium Niobate and Silicon

We enable density-based topology optimization (TO) to design integrated photonic devices featuring nonvertical sidewall profiles. Specifically, we demonstrate TO for fabrication processes with slanted sidewalls which are often used to enhance vertical coupling efficiency and fabrication processes with angled sidewalls which are a common feature of etching. The techniques demonstrated are readily adaptable to other etch profiles such as asymmetric or nonlinear. The enhancements are compatible with existing TO techniques, lengthscale constraints and multi-layer designs, and any dielectric materials, suiting the techniques for both academic and commercial foundry fabrications. We demonstrated the developed capabilities by designing slanted and angled silicon grating couplers and thin-film lithium niobate on insulator dual-polarization s-bends.

physics.optics↗

Inverse-Designed Tapers for Compact Conversion Between Single-Mode and Wide Waveguides

Waveguide tapers are critical components for leveraging the benefits of both single-mode and wide waveguides. Adiabatic tapers are typically hundreds of microns in length, dramatically limiting density and scalability. We reenvision the taper design process in an inverse-design paradigm, introducing the novel L-taper. We present a novel approach to inverse-designed tapers where the input and output waveguides are rotated 90 degrees with respect to each other. The resultant design has an order-of-magnitude smaller footprint, and the design process is compatible with a variety of fabrication processes. We demonstrate an L-taper designed on 220 nm silicon-on-insulator that converts a 0.5 micron waveguide to a 12 micron waveguide with -0.38 dB transmission and 40 nm 1-dB bandwidth. The footprint is 16 micron by 6 micron, representing a 12x smaller footprint than a linear taper with the same transmission.

physics.optics↗

Fabrication Tolerant Multi-Layer Integrated Photonic Topology Optimization

Optimal multi-layer device design requires consideration of fabrication uncertainties associated with inter-layer alignment and conformal layering. We present layer-restricted topology optimization (TO), a novel technique which mitigates the effects of unwanted conformal layering for multi-layer structures and enables TO in multi-etch material platforms. We explore several approaches to achieve this result compatible with density-based TO projection techniques and geometric constraints. Then, we present a robust TO formulation to design devices resilient to inter-layer misalignment. The novel constraint and robust formulation are demonstrated in 2D grating couplers and a 3D polarization rotator.

physics.optics↗