arXiv subjects

Merouane Debbah

Publications and source records attributed to Merouane Debbah.

At least 235 records · Page 13Linked to original sources

arXiv2022

Variational Autoencoders for Reliability Optimization in Multi-Access Edge Computing Networks

Multi-access edge computing (MEC) is viewed as an integral part of future wireless networks to support new applications with stringent service reliability and latency requirements. However, guaranteeing ultra-reliable and low-latency MEC (URLL MEC) is very challenging due to uncertainties of wireless links, limited communications and computing resources, as well as dynamic network traffic. Enabling URLL MEC mandates taking into account the statistics of the end-to-end (E2E) latency and reliability across the wireless and edge computing systems. In this paper, a novel framework is proposed to optimize the reliability of MEC networks by considering the distribution of E2E service delay, encompassing over-the-air transmission and edge computing latency. The proposed framework builds on correlated variational autoencoders (VAEs) to estimate the full distribution of the E2E service delay. Using this result, a new optimization problem based on risk theory is formulated to maximize the network reliability by minimizing the Conditional Value at Risk (CVaR) as a risk measure of the E2E service delay. To solve this problem, a new algorithm is developed to efficiently allocate users' processing tasks to edge computing servers across the MEC network, while considering the statistics of the E2E service delay learned by VAEs. The simulation results show that the proposed scheme outperforms several baselines that do not account for the risk analyses or statistics of the E2E service delay.

eess.SY↗

arXiv2021

A Survey on 5G Radio Access Network Energy Efficiency: Massive MIMO, Lean Carrier Design, Sleep Modes, and Machine Learning

Cellular networks have changed the world we are living in, and the fifth generation (5G) of radio technology is expected to further revolutionise our everyday lives, by enabling a high degree of automation, through its larger capacity, massive connectivity, and ultra-reliable low-latency communications. In addition, the third generation partnership project (3GPP) new radio (NR) specification also provides tools to significantly decrease the energy consumption and the green house emissions of next generations networks, thus contributing towards information and communication technology (ICT) sustainability targets. In this survey paper, we thoroughly review the state-of-the-art on current energy efficiency research. We first categorise and carefully analyse the different power consumption models and energy efficiency metrics, which have helped to make progress on the understanding of green networks. Then, as a main contribution, we survey in detail -- from a theoretical and a practical viewpoint -- the main energy efficiency enabling technologies that 3GPP NR provides, together with their main benefits and challenges. Special attention is paid to four key enabling technologies, i.e., massive multiple-input multiple-output (MIMO), lean carrier design, and advanced idle modes, together with the role of artificial intelligence capabilities. We dive into their implementation and operational details, and thoroughly discuss their optimal operation points and theoretical-trade-offs from an energy consumption perspective. This will help the reader to grasp the fundamentals of -- and the status on -- green networking. Finally, the areas of research where more effort is needed to make future networks greener are also discussed.

cs.NI↗

arXiv2021

Towards Federated Learning-Enabled Visible Light Communication in 6G Systems

Visible light communication (VLC) technology was introduced as a key enabler for the next generation of wireless networks, mainly thanks to its simple and low-cost implementation. However, several challenges prohibit the realization of the full potentials of VLC, namely, limited modulation bandwidth, ambient light interference, optical diffuse reflection effects, devices non-linearity, and random receiver orientation. On the contrary, centralized machine learning (ML) techniques have demonstrated a significant potential in handling different challenges relating to wireless communication systems. Specifically, it was shown that ML algorithms exhibit superior capabilities in handling complicated network tasks, such as channel equalization, estimation and modeling, resources allocation, and opportunistic spectrum access control, to name a few. Nevertheless, concerns pertaining to privacy and communication overhead when sharing raw data of the involved clients with a server constitute major bottlenecks in the implementation of centralized ML techniques. This has motivated the emergence of a new distributed ML paradigm, namely federated learning (FL), which can reduce the cost associated with transferring raw data, and preserve privacy by training ML models locally and collaboratively at the clients' side. Hence, it becomes evident that integrating FL into VLC networks can provide ubiquitous and reliable implementation of VLC systems. With this motivation, this is the first in-depth review in the literature on the application of FL in VLC networks. To that end, besides the different architectures and related characteristics of FL, we provide a thorough overview on the main design aspects of FL based VLC systems. Finally, we also highlight some potential future research directions of FL that are envisioned to substantially enhance the performance and robustness of VLC systems.

cs.AI↗

arXiv2021

Intelligent Omni-Surfaces for Full-Dimensional Wireless Communications: Principle, Technology, and Implementation

The recent development of metasurfaces has motivated their potential use for improving the performance of wireless communication networks by manipulating the propagation environment through nearly-passive sub-wavelength scattering elements arranged on a surface. However, most studies of this technology focus on reflective metasurfaces, i.e., the surface reflects the incident signals towards receivers located on the same side of the transmitter, which restricts the coverage to one side of the surface. In this article, we introduce the concept of intelligent omni-surface (IOS), which is able to serve mobile users on both sides of the surface to achieve full-dimensional communications by jointly engineering its reflective and refractive properties. The working principle of the IOS is introduced and a novel hybrid beamforming scheme is proposed for IOS-based wireless communications. Moreover, we present a prototype of IOS-based wireless communications and report experimental results. Furthermore, potential applications of the IOS to wireless communications together with relevant research challenges are discussed.

cs.IT↗

arXiv2021

Seven Defining Features of Terahertz (THz) Wireless Systems: A Fellowship of Communication and Sensing

Wireless communication at the terahertz (THz) frequency bands (0.1-10THz) is viewed as one of the cornerstones of tomorrow's 6G wireless systems. Owing to the large amount of available bandwidth, THz frequencies can potentially provide wireless capacity performance gains and enable high-resolution sensing. However, operating a wireless system at the THz-band is limited by a highly uncertain channel. Effectively, these channel limitations lead to unreliable intermittent links as a result of a short communication range, and a high susceptibility to blockage and molecular absorption. Consequently, such impediments could disrupt the THz band's promise of high-rate communications and high-resolution sensing capabilities. In this context, this paper panoramically examines the steps needed to efficiently deploy and operate next-generation THz wireless systems that will synergistically support a fellowship of communication and sensing services. For this purpose, we first set the stage by describing the fundamentals of the THz frequency band. Based on these fundamentals, we characterize seven unique defining features of THz wireless systems: 1) Quasi-opticality of the band, 2) THz-tailored wireless architectures, 3) Synergy with lower frequency bands, 4) Joint sensing and communication systems, 5) PHY-layer procedures, 6) Spectrum access techniques, and 7) Real-time network optimization. These seven defining features allow us to shed light on how to re-engineer wireless systems as we know them today so as to make them ready to support THz bands. Furthermore, these features highlight how THz systems turn every communication challenge into a sensing opportunity. Ultimately, the goal of this article is to chart a forward-looking roadmap that exposes the necessary solutions and milestones for enabling THz frequencies to realize their potential as a game changer for next-generation wireless systems.

cs.IT↗

arXiv2021

Uplink Power Control in Massive MIMO with Double Scattering Channels

Massive multiple-input multiple-output (MIMO) is a key technology for improving the spectral and energy efficiency in 5G-and-beyond wireless networks. For a tractable analysis, most of the previous works on Massive MIMO have been focused on the system performance with complex Gaussian channel impulse responses under rich-scattering environments. In contrast, this paper investigates the uplink ergodic spectral efficiency (SE) of each user under the double scattering channel model. We derive a closed-form expression of the uplink ergodic SE by exploiting the maximum ratio (MR) combining technique based on imperfect channel state information. We further study the asymptotic SE behaviors as a function of the number of antennas at each base station (BS) and the number of scatterers available at each radio channel. We then formulate and solve a total energy optimization problem for the uplink data transmission that aims at simultaneously satisfying the required SEs from all the users with limited data power resource. Notably, our proposed algorithms can cope with the congestion issue appearing when at least one user is served by lower SE than requested. Numerical results illustrate the effectiveness of the closed-form ergodic SE over Monte-Carlo simulations. Besides, the system can still provide the required SEs to many users even under congestion.

cs.IT↗

arXiv2021

Joint Multi-User Communication and Sensing Exploiting Both Signal and Environment Sparsity

As a potential technology feature for 6G wireless networks, the idea of sensing-communication integration requires the system not only to complete reliable multi-user communication but also to achieve accurate environment sensing. In this paper, we consider such a joint communication and sensing (JCAS) scenario, in which multiple users use the sparse code multiple access (SCMA) scheme to communicate with the wireless access point (AP). Part of the user signals are scattered by the environment object and reflected by an intelligent reflective surface (IRS) before they arrive at the AP. We exploit the sparsity of both the structured user signals and the unstructured environment and propose an iterative and incremental joint multi-user communication and environment sensing scheme, in which the two processes, i.e., multi-user information detection and environment object detection, interweave with each other thanks to their intrinsic mutual dependence. The proposed algorithm is sliding-window based and also graph based, which can keep on sensing the environment as long as there are illuminating user signals. The trade-off relationship between the key system parameters is analyzed, and the simulation result validates the convergence and effectiveness of the proposed algorithm.

eess.SP↗

arXiv2021

Spectrum Learning-Aided Reconfigurable Intelligent Surfaces for 'Green' 6G Networks

In the sixth-generation (6G) era, emerging large-scale computing based applications (for example processing enormous amounts of images in real-time in autonomous driving) tend to lead to excessive energy consumption for the end users, whose devices are usually energy-constrained. In this context, energy-efficiency becomes a critical challenge to be solved for harnessing these promising applications to realize 'green' 6G networks. As a remedy, reconfigurable intelligent surfaces (RIS) have been proposed for improving the energy efficiency by beneficially reconfiguring the wireless propagation environment. In conventional RIS solutions, however, the received signal-to-interference-plus-noise ratio (SINR) sometimes may even become degraded. This is because the signals impinging upon an RIS are typically contaminated by interfering signals which are usually dynamic and unknown. To address this issue, `learning' the properties of the surrounding spectral environment is a promising solution, motivating the convergence of artificial intelligence and spectrum sensing, termed here as spectrum learning (SL). Inspired by this, we develop an SL-aided RIS framework for intelligently exploiting the inherent characteristics of the radio frequency (RF) spectrum for green 6G networks. Given the proposed framework, the RIS controller becomes capable of intelligently `{think-and-decide}' whether to reflect or not the incident signals. Therefore, the received SINR can be improved by dynamically configuring the binary ON-OFF status of the RIS elements. The energy-efficiency benefits attained are validated with the aid of a specific case study. Finally, we conclude with a list of promising future research directions.

eess.SP↗

arXiv2021

Bidirectional Approximate Message Passing for RIS-Assisted Multi-User MISO Communications

Reconfigurable intelligent surfaces (RISs) have been recently considered as a promising candidate for energy-efficient solutions in future wireless networks. Their dynamic and lowpower configuration enables coverage extension, massive connectivity, and low-latency communications. Due to a large number of unknown variables referring to the RIS unit elements and the transmitted signals, channel estimation and signal recovery in RIS-based systems are the ones of the most critical technical challenges. To address this problem, we focus on the RIS-assisted multi-user wireless communication system and present a joint channel estimation and signal recovery algorithm in this paper. Specifically, we propose a bidirectional approximate message passing algorithm that applies the Taylor series expansion and Gaussian approximation to simplify the sum-product algorithm in the formulated problem. Our simulation results show that the proposed algorithm shows the superiority over a state-of-art benchmark method. We also provide insights on the impact of different RIS parameter settings on the proposed algorithms.

cs.IT↗

arXiv2021

6G V2X Technologies and Orchestrated Sensing for Autonomous Driving

6G technology targets to revolutionize the mobility industry by revamping the role of wireless connections. In this article, we draw out our vision on an intelligent, cooperative, and sustainable mobility environment of the future, discussing how 6G will positively impact mobility services and applications. The scenario in focus is a densely populated area by smart connected entities that are mutually connected over a 6G virtual bus, which enables access to an extensive and always up-to-date set of context-sensitive information. The augmented dataset is functional to let vehicles engage in adaptive and cooperative learning mechanisms, enabling fully automated functionalities with higher communication integrity and reduced risk of accidents while being a sentient and collaborative processing node of the same ecosystem. Smart sensing and communication technologies are discussed herein, and their convergence is devised by the pervasiveness of artificial intelligence in centralized or distributed and federated network architectures.

cs.NI↗

arXiv2021

Massive MIMO under Double Scattering Channels: Power Minimization and Congestion Controls

This paper considers a massive MIMO system under the double scattering channels. We derive a closed-form expression of the uplink ergodic spectral efficiency (SE) by exploiting the maximum-ratio combining technique with imperfect channel state information. We then formulate and solve a total uplink data power optimization problem that aims at simultaneously satisfying the required SEs from all the users with limited power resources. We further propose algorithms to cope with the congestion issue appearing when at least one user is served by lower SE than requested. Numerical results illustrate the effectiveness of our proposed power optimization. More importantly, our proposed congestion-handling algorithms can guarantee the required SEs to many users under congestion, even when the SE requirement is high.

cs.IT↗

arXiv2021

On the Optimality of Reconfigurable Intelligent Surfaces (RISs): Passive Beamforming, Modulation, and Resource Allocation

Reconfigurable intelligent surfaces (RISs) have recently emerged as a promising technology that can achieve high spectrum and energy efficiency for future wireless networks by integrating a massive number of low-cost and passive reflecting elements. An RIS can manipulate the properties of an incident wave, such as the frequency, amplitude, and phase, and, then, reflect this manipulated wave to a desired destination, without the need for complex signal processing. In this paper, the asymptotic optimality of achievable rate in a downlink RIS system is analyzed under a practical RIS environment with its associated limitations. In particular, a passive beamformer that can achieve the asymptotic optimal performance by controlling the incident wave properties is designed, under a limited RIS control link and practical reflection coefficients. In order to increase the achievable system sum-rate, a modulation scheme that can be used in an RIS without interfering with existing users is proposed and its average symbol error ratio is asymptotically derived. Moreover, a new resource allocation algorithm that jointly considers user scheduling and power control is designed, under consideration of the proposed passive beamforming and modulation schemes. Simulation results show that the proposed schemes are in close agreement with their upper bounds in presence of a large number of RIS reflecting elements thereby verifying that the achievable rate in practical RISs satisfies the asymptotic optimality.

cs.IT↗

arXiv2020

Predictive Ultra-Reliable Communication: A Survival Analysis Perspective

Ultra-reliable communication (URC) is a key enabler for supporting immersive and mission-critical 5G applications. Meeting the strict reliability requirements of these applications is challenging due to the absence of accurate statistical models tailored to URC systems. In this letter, the wireless connectivity over dynamic channels is characterized via statistical learning methods. In particular, model-based and data-driven learning approaches are proposed to estimate the non-blocking connectivity statistics over a set of training samples with no knowledge on the dynamic channel statistics. Using principles of survival analysis, the reliability of wireless connectivity is measured in terms of the probability of channel blocking events. Moreover, the maximum transmission duration for a given reliable non-blocking connectivity is predicted in conjunction with the confidence of the inferred transmission duration. Results show that the accuracy of detecting channel blocking events is higher using the model-based method for low to moderate reliability targets requiring low sample complexity. In contrast, the data-driven method shows higher detection accuracy for higher reliability targets at the cost of 100$\times$ sample complexity.

cs.NI↗

arXiv2020

Phase Configuration Learning in Wireless Networks with Multiple Reconfigurable Intelligent Surfaces

Reconfigurable Intelligent Surfaces (RISs) are recently gaining remarkable attention as a low-cost, hardware-efficient, and highly scalable technology capable of offering dynamic control of electro-magnetic wave propagation. Their envisioned dense deployment over various obstacles of the, otherwise passive, wireless communication environment has been considered as a revolutionary means to transform them into network entities with reconfigurable properties, providing increased environmental intelligence for diverse communication objectives. One of the major challenges with RIS-empowered wireless communications is the low-overhead dynamic configuration of multiple RISs, which according to the current hardware designs have very limited computing and storage capabilities. In this paper, we consider a typical communication pair between two nodes that is assisted by a plurality of RISs, and devise low-complexity supervised learning approaches for the RISs' phase configurations. By assuming common tunable phases in groups of each RIS's unit elements, we present multi-layer perceptron Neural Network (NN) architectures that can be trained either with positioning values or the instantaneous channel coefficients. We investigate centralized and individual training of the RISs, as well as their federation, and assess their computational requirements. Our simulation results, including comparisons with the optimal phase configuration scheme, showcase the benefits of adopting individual NNs at RISs for the link budget performance boosting.

cs.IT↗

arXiv2020

Overhead-Aware Design of Reconfigurable Intelligent Surfaces in Smart Radio Environments

Reconfigurable intelligent surfaces have emerged as a promising technology for future wireless networks. Given that a large number of reflecting elements is typically used, and that the surface has no signal processing capabilities, a major challenge is to cope with the overhead that is required to estimate the channel state information and to report the optimized phase shifts to the surface. This issue has not been addressed by previous works, which do not explicitly consider the overhead during the resource allocation phase. This work aims at filling this gap, developing an overhead-aware resource allocation framework for wireless networks where reconfigurable intelligent surfaces are used to improve the communication performance. An overhead model is developed and incorporated in the expressions of the system rate and energy efficiencies, which are then optimized with respect to the phase shifts of the reconfigurable intelligent surface, the transmit and receive filters, and the power and bandwidth used for the communication and feedback phases. The bi-objective maximization of the rate and energy efficiency is carried out as well. The proposed framework allows characterizing the trade-off between optimized radio resources and the related overhead in networks with reconfigurable intelligent surfaces.

cs.IT↗

arXiv2020

Predictive Deployment of UAV Base Stations in Wireless Networks: Machine Learning Meets Contract Theory

In this paper, a novel framework is proposed to enable a predictive deployment of unmanned aerial vehicles (UAVs) as temporary base stations (BSs) to complement ground cellular systems in face of downlink traffic overload. First, a novel learning approach, based on the weighted expectation maximization (WEM) algorithm, is proposed to estimate the user distribution and the downlink traffic demand. Next, to guarantee a truthful information exchange between the BS and UAVs, using the framework of contract theory, an offload contract is developed, and the sufficient and necessary conditions for having a feasible contract are analytically derived. Subsequently, an optimization problem is formulated to deploy an optimal UAV onto the hotspot area in a way that the utility of the overloaded BS is maximized. Simulation results show that the proposed WEM approach yields a prediction error of around 10%. Compared with the expectation maximization and k-mean approaches, the WEM method shows a significant advantage on the prediction accuracy, as the traffic load in the cellular system becomes spatially uneven. Furthermore, compared with two event-driven deployment schemes based on the closest-distance and maximal-energy metrics, the proposed predictive approach enables UAV operators to provide efficient communication service for hotspot users in terms of the downlink capacity, energy consumption and service delay. Simulation results also show that the proposed method significantly improves the revenues of both the BS and UAV networks, compared with two baseline schemes.

cs.IT↗

arXiv2020

Opportunistic Beamforming using an Intelligent Reflecting Surface Without Instantaneous CSI

While intelligent reflecting surface (IRS) assisted wireless communication has emerged as an important research paradigm, channel state information (CSI) acquisition remains a critical challenge to design the IRS phase-shifts and yield the promised coherent beamforming gains. In this paper, we propose an IRS-assisted opportunistic beamforming (OBF) scheme under proportional fair scheduling, which does not require instantaneous CSI to design the IRS parameters. In a slow-fading environment, we show that with only random rotations at the IRS, the proposed scheme can capitalize on the multi-user (MU)-diversity effect to approach the performance of coherent beamforming as the number of users grows large. Next we study the sum-rate scaling of IRS-assisted OBF in the correlated Rayleigh fast fading environment under a deterministic beamforming scheme that results in a considerable sum-rate improvement.

cs.IT↗

arXiv2020

Data-Driven False Data Injection Attacks Against Power Grids: A Random Matrix Approach

We address the problem of constructing false data injection (FDI) attacks that can bypass the bad data detector (BDD) of a power grid. The attacker is assumed to have access to only power flow measurement data traces (collected over a limited period of time) and no other prior knowledge about the grid. Existing related algorithms are formulated under the assumption that the attacker has access to measurements collected over a long (asymptotically infinite) time period, which may not be realistic. We show that these approaches do not perform well when the attacker has a limited number of data samples only. We design an enhanced algorithm to construct FDI attack vectors in the face of limited measurements that can nevertheless bypass the BDD with high probability. The algorithm design is guided by results from random matrix theory. Furthermore, we characterize an important trade-off between the attack's BDD-bypass probability and its sparsity, which affects the spatial extent of the attack that must be achieved. Extensive simulations using data traces collected from the MATPOWER simulator and benchmark IEEE bus systems validate our findings.

cs.CR↗