arXiv subjects

Mehdi Safarpour

Publications and source records attributed to Mehdi Safarpour.

7 recordsLinked to original sources

arXiv2026

Energy Efficient Near-Threshold Voltage Massive MIMO Computing

Near-Threshold Computing (NTC) offers a substan- tial energy savings, i.e., up to 10x, for digital circuits. However, due to Process, Voltage, and Temperature (PVT) variations, low voltage operating digital processors face increased susceptibility to timing errors. This work equips conventional massive MIMO algorithms with computational error detection mechanisms, en- abling reliable operation down to near-threshold voltages. While conventional hardware based Timing Error Detection (TED) systems introduce substantial overhead, this work modifies MIMO algorithms to seamlessly integrate low overhead Algorithm Based Fault Tolerance (ABFT). A co-simulation framework combining transistor level SPICE simulations and workload aware fault injection is developed to investigate reliability, Bit Error Rate (BER), energy savings, and overheads of modified algorithms operating at low voltages. The transistor-level characterization was performed in PSpice using generic Level-1 Shichman-Hodges CMOS transistor models with Monte Carlo parameter variations. No specific CMOS fabrication process node was assumed. Conse- quently, the reported energy savings are analytical estimates and are not specific to a particular CMOS fabrication technology. We evaluate Gauss Seidel (GS), ADMM based infinity norm detection (ADMIN), and Conjugate Gradient (CG) detectors using circuit derived fault models. Results demonstrate remarkable algorith- mic resilience. Although undetected computational errors in some trials near the Point of First Failure (PoFF) were observed, BER increases by only 0.7% to 1.4%, while beyond PoFF, ABFT reported nearly all erroneous cases. The proposed checksum based ABFT detects most arithmetic and memory errors, with an estimated overhead below 2% for a 64 x 16 MIMO system, decreasing further for larger configurations.

cs.AR↗

arXiv2026

A Cross-Domain Matrix Engine for Signal Processing and Deep Neural Net Inference

Matrix multiplication dominates both PHY signal processing and Deep Neural Network (DNN) inference, yet these domains place opposing demands on the matrix engine. Signal processing requires low-latency execution of relatively small matrix operations, whereas DNN inference, particularly at large batch sizes, prioritizes high throughput and energy efficiency for large matrix multiplications. While offering efficient memory access profile, a Systolic Array (SA) adds fill and drain delays per matrix. Those can be amortized for large matrices but not for small matrices. Conversely, a tensor unit completes the kernel in few cycles but would require repeated reads of same operand tiles over large matrices. This makes SA too slow for signal processing and tensor too inefficient for AI. We show that this need not be a choice between systolic and tensor structuring of Multiply-Accumulate (MAC) units. We propose a single engine that operates primarily as a SA and, through low-cost reconfiguration, transforms into a tensor-style engine on a per-operation basis. MUXes create both the spatial reduction adder tree and temporal reduction accumulators from the existing MACs and registers within the systolic array. The proposed reconfigurable SA simulated using modified SCALESim simulator, verified on an Zynq 702 FPGA and synthesized using ASAP 7nm FinFET library. SCALE-Sim simulations shows up to 7.5x lower latency for small complex value PHY kernels. Even on DNN workloads, it achieves up to 1.65x speedups over vanilla SA execution with trivial increase of memory accesses, retaining the systolic array's memory access advantage. Synthesis results estimate reconfigurable fabric costs only 8% power and 13.6% area overheads.

cs.AR↗

arXiv2025

Near-Threshold Voltage Massive MIMO Computing

Massive MIMO systems have the potential to significantly enhance spectral efficiency, yet their widespread integration is hindered by the high power consumption of the underlying computations. This paper explores the applicability and effectiveness of Algorithm-Based Fault Tolerance (ABFT) for massive MIMO signal processing to tackle the reliability challenge of Near Threshold Computing (NTC). We propose modifying matrix arithmetic Newton iteration MIMO algorithm to seamlessly integrate ABFT to detect any computational errors by inspecting the final result. The overhead from ABFT depends largely on the matrix dimensions, which in this context are dictated by the number of user equipments involved in the computation. NTC is a promising strategy for reducing the energy consumption in digital circuits by operating transistors at extremely reduced voltages. However, NTC is highly susceptible to variations in Process, Voltage, and Temperature (PVT) which can lead to increased error rates in computations. Traditional techniques for enabling NTC, such as dynamic voltage and frequency scaling guided by circuit level timing error detection methods, introduce considerable hardware complexity and are difficult to implement at high clock frequencies. In this context ABFT has emerged as a lightweight error detection method tailored for matrix operations without requiring any modifications on circuit-level and can be implemented purely in software.A MIMO accelerator was implemented on a reconfigurable hardware platform. Experimental results demonstrate that for sufficiently large problem sizes, the proposed method achieves a 36% power saving compared to baseline, with only an average of 3% computational overhead, at default clock frequency. These results indicate that combining ABFT with near-threshold operation provides a viable path toward energy-efficient and robust massive MIMO processors.

eess.SP↗

arXiv2025

Shavette: Low Power Neural Network Acceleration via Algorithm-level Error Detection and Undervolting

Reduced voltage operation is an effective technique for substantial energy efficiency improvement in digital circuits. This brief introduces a simple approach for enabling reduced voltage operation of Deep Neural Network (DNN) accelerators by mere software modifications. Conventional approaches for enabling reduced voltage operation e.g., Timing Error Detection (TED) systems, incur significant development costs and overheads, while not being applicable to the off-the-shelf components. Contrary to those, the solution proposed in this paper relies on algorithm-based error detection, and hence, is implemented with low development costs, does not require any circuit modifications, and is even applicable to commodity devices. By showcasing the solution through experimenting on popular DNNs, i.e., LeNet and VGG16, on a GPU platform, we demonstrate 18% to 25% energy saving with no accuracy loss of the models and negligible throughput compromise (< 3.9%), considering the overheads from integration of the error detection schemes into the DNN. The integration of presented algorithmic solution into the design is simpler when compared conventional TED based techniques that require extensive circuit-level modifications, cell library characterizations or special support from the design tools.

cs.AR↗

arXiv2019

Transport Triggered Array Processor for Vision Applications

Low-level sensory data processing in many Internet-of-Things (IoT) devices pursue energy efficiency by utilizing sleep modes or slowing the clocking to the minimum. To curb the share of stand-by power dissipation in those designs, near-threshold/sub-threshold operational points or ultra-low-leakage processes in fabrication are employed. Those limit the clocking rates significantly, reducing the computing throughputs of individual processing cores. In this contribution we explore compensating for the performance loss of operating in near-threshold region (Vdd =0.6V) through massive parallelization. Benefits of near-threshold operation and massive parallelism are optimum energy consumption per instruction operation and minimized memory roundtrips, respectively. The Processing Elements (PE) of the design are based on Transport Triggered Architecture. The fine grained programmable parallel solution allows for fast and efficient computation of learnable low-level features (e.g. local binary descriptors and convolutions). Other operations, including Max-pooling have also been implemented. The programmable design achieves excellent energy efficiency for Local Binary Patterns computations.

eess.SP↗

arXiv2019

A Reconfigurable Dual-Mode Tracking SAR ADC without Analog Subtraction

In this contribution, it is proposes to limit the quantization search space of a successive approximation analog-to-digital converter through an analytic derivation of maximum possible sample-to-sample variation. The presented example design of the proposed ADC is an 8-bit 1MS/s ADC with SAR logic customized to incorporate this priori information while no modification has been required to the analog circuitry. In comparison to conventional SAR conversion, the proposed tracking approach yields significant reduction in total power consumption in oversampling mode. The power savings are due to the reduced number of SAR cycles, and voltage variation minimization across DAC capacitors. The design is reconfigurable both to conventional SAR sampling and the proposed tracking scheme. The approach is attractive for SAR ADCs embedded in very low power micro-controllers.

eess.SP↗

arXiv2016

Capacity Enlargement Of The PVD Steganography Method Using The GLM Technique

In most steganographic methods, increasing in the capacity leads to decrease in the quality of the stego-image, so in this paper, we propose to combine two existing techniques, Pixel value differencing and Gray Level Modification, to come up with a hybrid steganography scheme which can hide more information without having to compromise much on the quality of the stego-image. Experimental results demonstrate that the proposed approach has larger capacity while its results are imperceptible. In comparison with original PVD method criterion of the quality is declined by 2% dB averagely while the capacity is increased around 25%.

cs.MM↗