arXiv subjects

Maxwell McManus

Publications and source records attributed to Maxwell McManus.

7 recordsLinked to original sources

arXiv2026

Designing, Deployment and Field Testing of C2Stack for Networked Intelligent Software-Defined UAVs

Unmanned Aerial Vehicles (UAVs) are emerging as critical enablers of next-generation wireless networking and autonomous systems. Despite their potential, deploying and testing networked UAV systems in real-world environments remains challenging, largely due to the absence of well-developed, end-to-end, ready-to-use protocol stacks. To fill this gap, we present C2Stack, a configurable protocol stack and experimental framework designed for real-time control, evaluation, and optimization of UAV networks. C2Stack incorporates a modular control plane, referred to as the~C2Stack Network Operating System (CNOS), alongside a programmable data plane that exposes APIs for cross-layer algorithm development, digital twin integration, and autonomous swarm control. In this article, we share our experience with the deployment and testing of C2Stack. We implemented C2Stack on a custom UAV swarm platform that integrates multiprocessor system-on-chip (MPSoC) radios with Intel NUC computing modules, enabling interoperability with various RF front ends. Field trials were conducted in both netted environments and large-scale outdoor test ranges, focusing on two representative use cases: (i) network utility maximization through online reinforcement learning, and (ii) collaborative interference source localization. The experiments demonstrate the feasibility of real-time, data-driven optimization in dynamic aerial environments, while also revealing practical challenges in field deployments of networked UAV systems, including power constraints, sensing limitations, and deployment logistics. We have made C2Stack source code available to the community under the MIT License, with the goal of establishing it as a foundational framework for experimental research on intelligent networked aerial systems.

eess.SY↗

arXiv2026

StormWave: An Open-Source Portable SDR Platform for Over-the-Air Resilience Evaluation of Terrestrial and Aerial Communications

This paper presents \emph{StormWave}, an open-source, portable software-defined Radio Frequency (RF) interference generation and monitoring platform designed for realistic field-based evaluation of the resilience of wireless communication systems. StormWave enables seamless composition and runtime switching among a wide range of narrowband and wideband waveforms, while supporting multiple digital modulations, adaptive coding, and multi-radio orchestration with real-time spectrum visualization. We evaluate the effectiveness of StormWave through both outdoor ground and air-to-air (A2A) experiments. Ground experiments demonstrate clear waveform- and modulation-dependent interference effects under realistic propagation conditions, while A2A experiments reveal pronounced distance-dependent constellation distortion and access-symbol degradation under active interference. The StormWave source code will be released to the community, with the expectation that StormWave will be used as a flexible, extensible, and field-ready platform for systematically validating interference resilience of wireless systems under realistic operating conditions.

eess.SY↗

arXiv2026

C-POD: An AWS Cloud Framework for Edge Pod Automation and Remote Wireless Testbed Sharing

This paper presents C-POD, a cloud-native framework that automates the deployment and management of edge pods for seamless remote access and sharing of wireless testbeds. C-POD leverages public cloud resources and edge pods to lower the barrier to over-the-air (OTA) experimentation, enabling researchers to share and access distributed testbeds without extensive local infrastructure. A supporting toolkit has been developed for C-POD to enable flexible and scalable experimental workflows, including containerized edge environments, persistent Secure Shell (SSH) tunnels, and stable graphical interfaces. We prototype and deploy C-POD on the Amazon Web Services (AWS) public cloud to demonstrate its key features, including cloud-assisted edge pod deployment automation, elastic computing resource management, and experiment observability, by integrating two wireless testbeds that focus on RF signal generation and 5G(B) communications, respectively.

eess.SP↗

arXiv2025

BenchLink: An SoC-Based Benchmark for Resilient Communication Links in GPS-Denied Environments

Accurate timing and synchronization, typically enabled by GPS, are essential for modern wireless communication systems. However, many emerging applications must operate in GPS-denied environments where signals are unreliable or disrupted, resulting in oscillator drift and carrier frequency impairments. To address these challenges, we present BenchLink, a System-on-Chip (SoC)-based benchmark for resilient communication links that functions without GPS and supports adaptive pilot density and modulation. Unlike traditional General Purpose Processor (GPP)-based software-defined radios (e.g. USRPs), the SoC-based design allows for more precise latency control. We implement and evaluate BenchLink on Zynq UltraScale+ MPSoCs, and demonstrate its effectiveness in both ground and aerial environments. A comprehensive dataset has also been collected under various conditions. We will make both the SoC-based link design and dataset available to the wireless community. BenchLink is expected to facilitate future research on data-driven link adaptation, resilient synchronization in GPS-denied scenarios, and emerging applications that require precise latency control, such as integrated radar sensing and communication.

eess.SP↗

arXiv2024

Cloud-Based Federation Framework and Prototype for Open, Scalable, and Shared Access to NextG and IoT Testbeds

In this work, we present a new federation framework for UnionLabs, an innovative cloud-based resource-sharing infrastructure designed for next-generation (NextG) and Internet of Things (IoT) over-the-air (OTA) experiments. The framework aims to reduce the federation complexity for testbeds developers by automating tedious backend operations, thereby providing scalable federation and remote access to various wireless testbeds. We first describe the key components of the new federation framework, including the Systems Manager Integration Engine (SMIE), the Automated Script Generator (ASG), and the Database Context Manager (DCM). We then prototype and deploy the new Federation Plane on the Amazon Web Services (AWS) public cloud, demonstrating its effectiveness by federating two wireless testbeds: i) UB NeXT, a 5G-and-beyond (5G+) testbed at the University at Buffalo, and ii) UT IoT, an IoT testbed at the University of Utah. Through this work we aim to initiate a grassroots campaign to democratize access to wireless research testbeds with heterogeneous hardware resources and network environment, and accelerate the establishment of a mature, open experimental ecosystem for the wireless community. The API of the new Federation Plane will be released to the community after internal testing is completed.

eess.SP↗

arXiv2024

On the Effects of Modeling on the Sim-to-Real Transfer Gap in Twinning the POWDER Platform

Digital Twin (DT) technology is expected to play a pivotal role in NextG wireless systems. However, a key challenge remains in the evaluation of data-driven algorithms within DTs, particularly the transfer of learning from simulations to real-world environments. In this work, we investigate the sim-to-real gap in developing a digital twin for the NSF PAWR Platform, POWDER. We first develop a 3D model of the University of Utah campus, incorporating geographical measurements and all rooftop POWDER nodes. We then assess the accuracy of various path loss models used in training modeling and control policies, examining the impact of each model on sim-to-real link performance predictions. Finally, we discuss the lessons learned from model selection and simulation design, offering guidance for the implementation of DT-enabled wireless networks.

eess.SP↗

arXiv2022

Digital Twin-Enabled Domain Adaptation for Zero-Touch UAV Networks: Survey and Challenges

In existing wireless networks, the control programs have been designed manually and for certain predefined scenarios. This process is complicated and error-prone, and the resulting control programs are not resilient to disruptive changes. Data-driven control based on Artificial Intelligence and Machine Learning (AI/ML) has been envisioned as a key technique to automate the modeling, optimization and control of complex wireless systems. However, existing AI/ML techniques rely on sufficient well-labeled data and may suffer from slow convergence and poor generalizability. In this article, focusing on digital twin-assisted wireless unmanned aerial vehicle (UAV) systems, we provide a survey of emerging techniques that can enable fast-converging data-driven control of wireless systems with enhanced generalization capability to new environments. These include SLAM-based sensing and network softwarization for digital twin construction, robust reinforcement learning and system identification for domain adaptation, and testing facility sharing and federation. The corresponding research opportunities are also discussed.

cs.NI↗