arXiv subjects

Maurice Stephan

Publications and source records attributed to Maurice Stephan.

7 recordsLinked to original sources

arXiv2026

From Simulation to Real Scans: Anomaly Detection in Maritime Cargo with Muon Scattering Tomography

Maritime cargo inspection requires imaging technologies capable of detecting concealed threats within dense, sealed containers, a role for which Muon Scattering Tomography (MST) is well suited: it images their interior through the density-dependent deflection of naturally occurring cosmic muons. However, MST remains constrained by the scarcity of labeled scans and by a cosmic muon flux that is both low and stochastic. Anomaly detection algorithms must therefore be trained on simulations, yet operate on measured scans acquired under different conditions, a sim-to-real gap that remains a central obstacle to operational deployment. We present the first end-to-end anomaly detection framework for maritime MST, from physically consistent simulations to validation on real container scans from the SilentBorder demonstration campaign. The task is cast as an out-of-distribution problem: the framework learns the spatial configurations of benign cargo and flags threats as deviations in the reconstruction error space, remaining agnostic to threat type and geometry. An attention U-Net, trained exclusively on benign synthetic scenes, preserves small-scale scattering signatures through its skip connections, and contraband consequently persists in the pixel-wise reconstruction error instead of being absorbed into the reconstructed background. A scoring function, the Homogeneity Index (HI), suppresses spatially uniform cosmic-ray statistical noise while amplifying coherent anomaly signatures: where pixel-level metrics collapse under a change of cargo configuration, HI retains its discriminative power. We evaluate three training strategies across two distinct cargo configurations under operational one-hour scan times, and test the best model on real muon cargo scans. The results for the studied scenarios indicate that the sim-to-real gap can be bridged.

physics.ins-det↗

arXiv2026

Synthetic-to-Real Domain Bridging for Single-View 3D Reconstruction of Ships for Maritime Monitoring

Three-dimensional (3D) reconstruction of ships is an important part of maritime monitoring, allowing improved visualization, inspection, and decision-making in real-world monitoring environments. However, most state-ofthe-art 3D reconstruction methods require multi-view supervision, annotated 3D ground truth, or are computationally intensive, making them impractical for real-time maritime deployment. In this work, we present an efficient pipeline for single-view 3D reconstruction of real ships by training entirely on synthetic data and requiring only a single view at inference. Our approach uses the Splatter Image network, which represents objects as sparse sets of 3D Gaussians for rapid and accurate reconstruction from single images. The model is first fine-tuned on synthetic ShapeNet vessels and further refined with a diverse custom dataset of 3D ships, bridging the domain gap between synthetic and real-world imagery. We integrate a state-of-the-art segmentation module based on YOLOv8 and custom preprocessing to ensure compatibility with the reconstruction network. Postprocessing steps include real-world scaling, centering, and orientation alignment, followed by georeferenced placement on an interactive web map using AIS metadata and homography-based mapping. Quantitative evaluation on synthetic validation data demonstrates strong reconstruction fidelity, while qualitative results on real maritime images from the ShipSG dataset confirm the potential for transfer to operational maritime settings. The final system provides interactive 3D inspection of real ships without requiring real-world 3D annotations. This pipeline provides an efficient, scalable solution for maritime monitoring and highlights a path toward real-time 3D ship visualization in practical applications. Interactive demo: https://dlr-mi.github.io/ship3d-demo/.

cs.CV↗

arXiv2025

Gradient-descent-based reconstruction for muon tomography based on automatic differentiation in PyTorch

Muon scattering tomography is a well-established, non-invasive imaging technique using cosmic-ray muons. Simple algorithms, such as PoCA (Point of Closest Approach), are often utilized to reconstruct the volume of interest from the observed muon tracks. However, it is preferable to apply more advanced reconstruction algorithms to efficiently use the sparse muon statistics that are available. One approach is to formulate the reconstruction task as a likelihood-based problem, where the material properties of the reconstruction volume are treated as an optimization parameter. In this contribution, we present a reconstruction method based on directly maximizing the underlying likelihood using automatic differentiation within the PyTorch framework. We will introduce the general idea of this approach, and evaluate its advantages over conventional reconstruction methods. Furthermore, first reconstruction results for different scenarios will be presented, and the potential that this approach inherently provides will be discussed.

hep-ex↗

arXiv2025

Cosmic-ray tomography of shipping containers: A combination of complementary secondary particle and muon information using simulations

Cosmic-ray tomography usually relies on measuring the scattering or transmission of muons produced within cosmic-ray air showers to reconstruct an examined volume of interest (VOI). During the traversing of a VOI, all air shower particles, including muons, interact with the matter within the VOI producing so-called secondary particles. The characteristics of the production of these particles contain additional information about the properties of the examined objects and their materials. However, this approach has not been fully realized practically. Hence, this work aims to study a novel technique to scan shipping containers by comparing and combining the complementary results from stand-alone secondary particles and muon scattering using simulated simplified scenes with a 1 m3 cube made out of five different materials located inside the container. The proposed approach for a statistical combination is based on a multi-step procedure centered around a clustering and segmentation algorithm. This ensures a consistent evaluation and comparison of the results before and after the combination focusing on dedicated properties of the reconstructed object. The findings of this work show a potential improvement over the results obtained solely through muon scattering due to the utilization of secondary particle information by applying this novel dual-channel cosmic-ray tomography analysis.

hep-ex↗

arXiv2024

Automatic occlusion removal from 3D maps for maritime situational awareness

We introduce a novel method for updating 3D geospatial models, specifically targeting occlusion removal in large-scale maritime environments. Traditional 3D reconstruction techniques often face problems with dynamic objects, like cars or vessels, that obscure the true environment, leading to inaccurate models or requiring extensive manual editing. Our approach leverages deep learning techniques, including instance segmentation and generative inpainting, to directly modify both the texture and geometry of 3D meshes without the need for costly reprocessing. By selectively targeting occluding objects and preserving static elements, the method enhances both geometric and visual accuracy. This approach not only preserves structural and textural details of map data but also maintains compatibility with current geospatial standards, ensuring robust performance across diverse datasets. The results demonstrate significant improvements in 3D model fidelity, making this method highly applicable for maritime situational awareness and the dynamic display of auxiliary information.

cs.CV↗

arXiv2023

B2G4: A synthetic data pipeline for the integration of Blender models in Geant4 simulation toolkit

The correctness and precision of particle physics simulation software, such as Geant4, is expected to yield results that closely align with real-world observations or well-established theoretical predictions. Notably, the accuracy of these simulated outcomes is contingent upon the software's capacity to encapsulate detailed attributes, including its prowess in generating or incorporating complex geometrical constructs. While the imperatives of precision and accuracy are essential in these simulations, the need to manually code highly detailed geometries emerges as a salient bottleneck in developing software-driven physics simulations. This research proposes Blender-to-Geant4 (B2G4), a modular data workflow that utilizes Blender to create 3D scenes, which can be exported as geometry input for Geant4. B2G4 offers a range of tools to streamline the creation of simulation scenes with multiple complex geometries and realistic material properties. Here, we demonstrate the use of B2G4 in a muon scattering tomography application to image the interior of a sealed steel structure. The modularity of B2G4 paves the way for the designed scenes and tools to be embedded not only in Geant4, but in other scientific applications or simulation software.

physics.comp-ph↗

arXiv2015

Status of the Silicon Photomultiplier Telescope FAMOUS for the Fluorescence Detection of UHECRs

An established technique for the measurement of ultra-high-energy-cosmic-rays is the detection of the fluorescence light induced in the atmosphere of the Earth, by means of telescopes equipped with photomultiplier tubes. Silicon photomultipliers (SiPMs) promise an increase in the photon detection efficiency which outperforms conventional photomultiplier tubes. In combination with their compact package, a moderate bias voltage of several ten volt and single photon resolution, the use of SiPMs can improve the energy and spatial resolution of air fluorescence measurements, and lead to a gain in information on the primary particle. Though, drawbacks like a high dark-noise-rate and a strong temperature dependency have to be managed. FAMOUS is a refracting telescope prototype instrumented with 64 SiPMs of which the main optical element is a Fresnel lens of 549.7 mm diameter and 502.1 mm focal length. The sensitive area of the SiPMs is increased by a special light collection system consisting of Winston cones. The total field of view of the telescope is approximately 12 $^\circ$. The frontend electronics automatically compensates for the temperature dependency of the SiPMs and will provide trigger information for the readout. Already for this prototype, the Geant4 detector simulation indicates full detection efficiency of extensive air showers of $E=10^{18}\,\text{eV}$ up to a distance of 6 km. We present the first working version of FAMOUS with a focal plane prototype providing seven active pixels.

astro-ph.IM↗