arXiv subjects

Matthias Grott

Publications and source records attributed to Matthias Grott.

6 recordsLinked to original sources

arXiv2026

Lava Tube Exploration with LunarLeaper

Lunar pits, some of which are interpreted as collapse features into underlying lava tubes, expose otherwise inaccessible stratigraphy and may provide entry points to subsurface voids that preserve records of lunar volcanism and offer potential sites for future human exploration. We synthesize the current state of knowledge on lunar pits and lava tubes, covering their morphological characteristics, classification, proposed formation mechanisms, mechanical stability, and detection from orbit. We then review the open science questions that pit and pit-wall investigation is uniquely placed to address, spanning the volcanic stratigraphy of the lunar maria, the structure and lateral variability of the regolith, and the dimensions and accessibility of subsurface conduits. To evaluate how these questions can be tackled in situ, we assess the feasibility and expected performance of geophysical and remote-sensing investigations for subsurface voids and surface exposures, mainly focusing on gravity measurements, ground-penetrating radar, high-resolution imaging, and spectroscopy. Building on this, we present LunarLeaper, a small legged robot mission concept combining a gravimeter, ground-penetrating radar, high-resolution imager, spectrometer, and leg-based geomechanical experiments to deliver the first in situ investigation of a mare pit. The concept targets the Marius Hills Pit and its associated rille, with a mobility architecture optimized for the rugged terrain encountered at pit edges and funnel slopes.

astro-ph.EP↗

arXiv2023

Microporosity and parent body of the rubble-pile NEA (162173) Ryugu

Observations of C-type NEAs and lab investigations of carbonaceous chondritic (CC) meteorites provide strong evidence for a high porosity of C-type asteroids. Boulder microporosity values derived from in-situ measurements at the surface of the rubble-pile NEA Ryugu of up to 55% are substantially higher than for water-rich CC samples and could indicate distinct evolution paths for the parent body of Ryugu and parent bodies of carbonaceous chondrites, despite spectral similarities. In the present study, we calculate the evolution of the temperature and porosity for early solar system's planetesimals in order to constrain the range of parameters that result in microporosities compatible with Ryugu's high-porosity material and likely burial depths for the boulders observed at the surface. By varying key properties of the parent body, such as accretion time t0 and radius R that have strong influence on temperature and porosity and by comparing the interior porosity distribution with the measured boulder microporosity, hydration, and partial dehydration of the material, we constrain a field within the (R,t0)-space appropriate for bodies that are likely to have produced such material. Our calculations indicate a parent body size of only a few km and its early accretion within <~2-3 Myr after the formation of Ca-Al-rich inclusions. A gradual final porosity profile of best-fit bodies indicates production of both low- and high-density boulders from the parent body material. By contrast, parent body properties for CI and CM chondrites obtained by fitting carbonate formation data indicate a radius of ~20-25 km and an accretion time of ~3.75 Myr after CAIs. These results imply a population of km-sized early accreting porous planetesimals as parent bodies of Ryugu (and, potentially, other NEAs) and a population of larger late accreting less porous parent bodies of water-rich carbonaceous chondrites.

astro-ph.EP↗

arXiv2022

Characterization of the MASCOT landing area by Hayabusa2

Context. After landing on C-type asteroid Ryugu, MASCOT imaged brightly colored, submillimeter-sized inclusions in a small rock. Hayabusa2 successfully returned a sample of small particles from the surface of Ryugu, but none of these appear to harbor such inclusions. The samples are considered representative of Ryugu. Aims. To understand the apparent discrepancy between MASCOT observations and Ryugu samples, we assess whether the MASCOT landing site, and the rock by implication, is perhaps atypical for Ryugu. Methods. We analyzed observations of the MASCOT landing area acquired by three instruments on board Hayabusa2: a camera (ONC), a near-infrared spectrometer (NIRS3), and a thermal infrared imager (TIR). We compared the landing area properties thus retrieved with those of the average Ryugu surface. Results. We selected several areas and landforms in the landing area for analysis: a small crater, a collection of smooth rocks, and the landing site itself. The crater is relatively blue and the rocks are relatively red. The spectral and thermophysical properties of the landing site are very close to those of the average Ryugu surface. The spectral properties of the MASCOT rock are probably close to average, but its thermal inertia may be somewhat higher. Conclusions. The MASCOT rock can also be considered representative of Ryugu. Some of the submillimeter-sized particles in the returned samples stand out because of their atypical spectral properties. Such particles may be present as inclusions in the MASCOT rock.

astro-ph.EP↗

arXiv2022

The specific heat of astro-materials: Review of theoretical concepts, materials and techniques

We provide detailed background, theoretical and practical, on the specific heat cp of minerals and mixtures thereof, 'astro-materials', as well as background information on common minerals and other relevant solid substances found on the surfaces of solar system bodies. Furthermore, we demonstrate how to use specific heat and composition data for lunar samples and meteorites as well as a new database of endmember mineral heat capacities (the result of an extensive literature review) to construct reference models for the isobaric specific heat cP as a function of temperature for common solar system materials. Using a (generally linear) mixing model for the specific heat of minerals allows extrapolation of the available data to very low and very high temperatures, such that models cover the temperature range between 10 and 1000 K at least (and pressures from zero up to several kbars). We describe a procedure to estimate cp(T) for virtually any solid solar system material with a known mineral composition, e.g., model specific heat as a function of temperature for a number of typical meteorite classes with known mineralogical compositions. We present, as examples, the cp(T) curves of a number of well-described laboratory regolith analogues, as well as for planetary ices and 'tholins' in the outer solar system. Part II will review and present the heat capacity database for minerals and compounds and part III is going to cover applications, standard reference compositions, cp(T) curves and a comparison with new and literature experimental data.

astro-ph.EP↗

arXiv2019

Potential Effects of Atmospheric Collapse on Martian Heat Flow and Application to the InSight Measurements

Heat flow is an important constraint on planetary formation and evolution. It has been suggested that Martian obliquity cycles might cause periodic collapses in atmospheric pressure, leading to corresponding decreases in regolith thermal conductivity (which is controlled by gas in the pore spaces). Geothermal heat would then build up in the subsurface, potentially affecting present-day heat flow - and thus the measurements made by a heat-flow probe such as the InSight HP$^{3}$ instrument. To gauge the order of magnitude of this effect, we model the diffusion of a putative heat pulse caused by thermal conductivity changes with a simple numerical scheme and compare it to the heat-flow perturbations caused by other effects. We find that an atmospheric collapse to 300 Pa in the last 40 kyr would lead to a present-day heat flow that is up to $2-8\%$ larger than the average geothermal background. Considering the InSight mission with expected $5-15\%$ error bars on the HP$^{3}$ measurement, this perturbation would only be significant in the best-case scenario of full instrument deployment, completed measurement campaign, and a well-modelled surface configuration. The prospects for detecting long-term climate perturbations via spacecraft heat-flow experiments remain challenging.

astro-ph.EP↗

arXiv2018

Asteroid Ryugu Before the Hayabusa2 Encounter

Asteroid (162173) Ryugu is the target object of Hayabusa2, an asteroid exploration and sample return mission led by Japan Aerospace Exploration Agency (JAXA). Ground-based observations indicate that Ryugu is a C-type near-Earth asteroid with a diameter of less than 1 km, but the knowledge of its detailed properties is still very limited. This paper summarizes our best understanding of the physical and dynamical properties of Ryugu based on remote sensing and theoretical modeling. This information is used to construct a design reference model of the asteroid that is used for formulation of mission operations plans in advance of asteroid arrival. Particular attention is given to the surface properties of Ryugu that are relevant to sample acquisition. This reference model helps readers to appropriately interpret the data that will be directly obtained by Hayabusa2 and promotes scientific studies not only for Ryugu itself and other small bodies but also for the Solar System evolution that small bodies shed light on.

astro-ph.EP↗