arXiv subjects

Matthew Engstrom

Publications and source records attributed to Matthew Engstrom.

6 recordsLinked to original sources

arXiv2026

Commissioning and on-sky performance verification of iLocater

iLocater is a high-resolution near-infrared extreme precision radial velocity (EPRV) spectrograph that was deployed to the Large Binocular Telescope (LBT) in June 2026. iLocater operates over $\lambda=966-1312$ nm with a median resolving power of $R=205,000$ as measured in the laboratory. We present the commissioning and initial on-sky verification program using solar and night-time observations at the LBT. First light was achieved on 27 June 2026, and nearly 150 on-sky spectra have now been recorded. Observations include single stars ranging in spectral type from B5 to M6. iLocater uses the LBT AO system, and we have demonstrated its ability to obtain spatially resolved spectra of close ($\theta < 1''$) binary stars.

astro-ph.IM↗

arXiv2026

Phase Retrieval using Nonlinear Curvature Sensing within Convergent Beams

Path-length diversity methods may be used for adaptive optics (AO) systems to retrieve phase and amplitude information by measuring intensity across multiple planes. Observations that rely on free-space propagation, such as the nonlinear curvature wavefront sensor (WFS), have been shown to offer excellent sensitivity and robustness to scintillation. However, the default design results in a large opto-mechanical footprint due to unavoidable geometric-optics and wave-optics effects. Measurements recorded in a convergent beam would improve instrument compactness, while concentrating light into smaller detector regions of interest, improving signal-to-noise ratio and possibly wavefront reconstruction speed. In this paper, we study path-length diversity wavefront sensing using four planes of contemporaneous intensity measurements made in a convergent beam. We develop a physical optics propagation model and validate the model by performing wavefront reconstructions in both simulations and lab experiments. The manuscripts core contribution is a practical, intensity-domain, Fourier-transform-based recipe to use a conventional multi-plane Gerchberg-Saxton (or comparable) reconstruction pipeline with convergent-beam measurements, enabling a compact optical layout. We find that this approach offers practical benefits over an equivalent free-space wavefront sensor, in particular reducing size, weight, complexity and cost.

physics.optics↗

arXiv2024

Resolving the Young 2 Cygni Run-away Star into a Binary using iLocater

Precision radial velocity (RV) spectrographs that use adaptive optics (AO) show promise to advance telescope observing capabilities beyond those of seeing-limited designs. We are building a spectrograph for the Large Binocular Telescope (LBT) named iLocater that uses AO to inject starlight directly into single mode fibers (SMF). iLocater's first acquisition camera system (the `SX' camera), which receives light from one of the 8.4m diameter primary mirrors of the LBT, was initially installed in summer 2019 and has since been used for several commissioning runs. We present results from first-light observations that include on-sky measurements as part of commissioning activities. Imaging measurements of the bright B3IV star 2 Cygni ($V=4.98$) resulted in the direct detection of a candidate companion star at an angular separation of only $\theta = 70$ mas. Follow-up AO measurements using Keck/NIRC2 recover the candidate companion in multiple filters. An $R\approx1500$ miniature spectrograph recently installed at the LBT named ``Lili'' provides spatially resolved spectra of each binary component, indicating similar spectral types and strengthening the case for companionship. Studying the multiplicity of young runaway star systems like 2 Cygni ($36.6 \pm 0.5$ Myr) can help to understand formation mechanisms for stars that exhibit anomalous velocities through the galaxy. This on-sky demonstration illustrates the spatial resolution of the iLocater SX acquisition camera working in tandem with the LBT AO system; it further derisks a number of technical hurdles involved in combining AO with Doppler spectroscopy.

astro-ph.IM↗

arXiv2024

Performance of the Nonlinear Curvature Wavefront Sensor as a Function of Scintillation Strength

Local amplitude aberrations caused by scintillation can impact the reconstruction process of a wavefront sensor (WFS) by inducing a spatially non-uniform intensity at the pupil plane. This effect is especially relevant for the commonly-used Shack-Hartmann WFS (SHWFS), which can lose slope information for portions of the beam where the signal is faint, leading to reduced reconstruction performance and eventually total failure as the level of scintillation increases. An alternative WFS is needed for such conditions. The nonlinear curvature wavefront sensor (nlCWFS) has been shown to achieve better sensitivity compared to the SHWFS under low light levels. Additionally, the nlCWFS has demonstrated the ability to maintain its sensitivity in the presence of scintillation, using amplitude aberrations to help inform the reconstruction process, rather than hinder. Experiments to date have thus far only shown reconstruction results for a single scintillation value. Building upon previous simulations and laboratory experiments, we have built a testbed to quantify the effects of varying scintillation strength on the wavefront reconstruction performance of the nlCWFS compared to an equivalent SHWFS. In this paper, we present results showing the difference in performance between the nlCWFS and SHWFS as a function of relative flux and scintillation strength.

astro-ph.IM↗

arXiv2022

The iLocater cryostat and thermal control system: enabling extremely precise radial velocity measurements for diffraction-limited spectrographs

Extremely precise radial velocity (EPRV) measurements are critical for characterizing nearby terrestrial worlds. EPRV instrument precisions of $\sigma_{\mathrm{RV}} = 1-10\,\mathrm{cm/s}$ are required to study Earth-analog systems, imposing stringent, sub-mK, thermo-mechanical stability requirements on Doppler spectrograph designs. iLocater is a new, high-resolution ($R=190,500$ median) near infrared (NIR) EPRV spectrograph under construction for the dual 8.4 m diameter Large Binocular Telescope (LBT). The instrument is one of the first to operate in the diffraction-limited regime enabled by the use of adaptive optics and single-mode fibers. This facilitates affordable optomechanical fabrication of the spectrograph using intrinsically stable materials. We present the final design and performance of the iLocater cryostat and thermal control system which houses the instrument spectrograph. The spectrograph is situated inside an actively temperature-controlled radiation shield mounted inside a multi-layer-insulation (MLI) lined vacuum chamber. The radiation shield provides sub-mK thermal stability, building on the existing heritage of the Habitable-zone Planet Finder (HPF) and NEID instruments. The instrument operating temperature ($T=80-100\,\mathrm{K}$) is driven by the requirement to minimize detector background and instantaneous coefficient of thermal expansion (CTE) of the materials used for spectrograph fabrication. This combination allows for a reduced thermomechanical impact on measurement precision, improving the scientific capabilities of the instrument.

astro-ph.IM↗

arXiv2020

Final Design and On-Sky Testing of the iLocater SX Acquisition Camera: Broadband Single-Mode Fiber Coupling

Enabling efficient injection of light into single-mode fibers (SMFs) is a key requirement in realizing diffraction-limited astronomical spectroscopy on ground-based telescopes. SMF-fed spectrographs, facilitated by the use of adaptive optics (AO), offer distinct advantages over comparable seeing-limited designs, including higher spectral resolution within a compact and stable instrument volume, and a telescope independent spectrograph design. iLocater is an extremely precise radial velocity (EPRV) spectrograph being built for the Large Binocular Telescope (LBT). We have designed and built the front-end fiber injection system, or acquisition camera, for the SX (left) primary mirror of the LBT. The instrument was installed in 2019 and underwent on-sky commissioning and performance assessment. In this paper, we present the instrument requirements, acquisition camera design, as well as results from first-light measurements. Broadband single-mode fiber coupling in excess of 35% (absolute) in the near-infrared (0.97-1.31{\mu}m) was achieved across a range of target magnitudes, spectral types, and observing conditions. Successful demonstration of on-sky performance represents both a major milestone in the development of iLocater and in making efficient ground-based SMF-fed astronomical instruments a reality.

astro-ph.IM↗