arXiv subjects

Matteo Moscheni

Publications and source records attributed to Matteo Moscheni.

3 recordsLinked to original sources

arXiv2026

The fixed boundary plasma equilibrium basis for a one Gigawatt electric stellarator power plant

A fixed boundary stellarator equilibrium capable of producing 3 GW of fusion power (1 GW-electric) is presented as the design basis for the GIGA fusion power plant being developed by Gauss Fusion GmbH. The stellarator concept provides a steady-state, transient free, low recirculating power approach to a fusion power plant, which builds on 50 years of progress in plasma physics. A set of requirements for a fixed boundary equilibrium were determined through application of 0.5 D modeling. Optimization of a modified Wendelstein 7-X (W7-X) equilibrium was performed to achieve these requirements including alpha power confinement greater than $85\%$, neoclassical effective ripple below 0.01, bootstrap current below 50 kA, and reduced turbulent heat fluxes. In order to fix the plasma volume of $1500~m^3$ during optimization, the VMEC code was modified to renormalize the boundary coefficient to the desired plasma volume. The STELLOPT stellarator optimization code was modified as well to include new bootstrap current targets, a new target for the radial electric field, and the capability to hold the magnetic field on axis at a fixed value. An intermediary conceptual design plasma and final evolved fixed boundary equilibria are compared to the original modified W7-X equilibrium. The final evolved equilibrium is shown to achieve all the necessary requirements for the GIGA fusion power plant through more detailed modeling of stability, fast ion confinement, and transport.

physics.plasm-ph↗

arXiv2026

On the Relationship Between Plasma and Tritium Fuel Cycle Through Matter Injection and Particle Exhaust

This work identifies an inconsistency between plasma operating scenarios and tritium fuel cycle (TFC) requirements, calling for a re-examination of the traditional reactor-led design approach. The key point is simple: in current TFC architectures, fuel puffing must contain tritium. Moscheni et al. (2026 Nucl. Fusion 66 026008) investigated fuel puffing rates in detached operation. Expanding that database, puffing is shown to exceed core fuelling by about an order of magnitude, from present-day tokamaks to next-step stellarators. Though not unknown in the plasma community, TFC models instead assumed core fuelling to dominate. The implications are severe. In recent TFC architectures, direct internal recycling (DIR) is intended to minimise tritium inventory, but assumes near-50:50 D:T composition. This assumption may become self-defeating: a substantial fraction of the puffed fuel must be tritium. Tritium inventory, doubling time, required breeding ratio, and pump sizing therefore become critical once puffing is properly accounted for. Mitigation is assessed by extending the models of Meschini et al. (2023 Nucl. Fusion 63 126005). For a notional plant, realistic TFC requirements can be met with D-rich, T-lean puffing, at the cost of about 10% lower fusion power. Alternatively, for near-50:50 D:T puffing, reduced fuel puffing with stronger impurity seeding can maintain detachment while alleviating TFC constraints, albeit with higher core contamination. Combined use of these strategies enables scenarios that minimise tritium inventory and throughput while balancing competing requirements. Ultimately, these results place renewed emphasis on the TFC as a central element of reactor design. A viable fusion reactor requires joint optimisation of core plasma, edge plasma, and TFC, implying unavoidable trade-offs across all three.

physics.plasm-ph↗

arXiv2024

Infra-red thermographic inversion in ST40

Infra-red (IR) thermography is an essential diagnostic tool for understanding the edge plasma behavior in fusion devices. In this work, we present a new in-house numerical tool, Functional Analysis of Heat Flux (FAHF), for IR thermographic inversion on Tokamak Energy's spherical tokamak (ST40). FAHF, written in Python, is designed for multi-2D thermographic inversions by solving the heat conduction equation within the divertor tiles using the finite difference method, and an explicit time stepping scheme. Utilising IR camera data with the highest available effective spatial resolution, FAHF calculates the plasma perpendicular heat flux density on the divertor tile surfaces -- a crucial quantity for edge plasma analysis. The tool's internal numerics is first verified through formal time and space convergence analyses, and further corroborated by an energy balance assessment. Although FAHF demonstrates significant sensitivity to user-selected spatial resolution, precise heat flux values are recoverable by ensuring a sufficiently high resolution. Implications for the optimal resolution of both the code and the diagnostic system are discussed. Finally, FAHF's model and geometry simplifications are confirmed to be accurate within 10%, based on comparison with COMSOL Multiphysics simulations. As such, FAHF is proven to be a precise and accurate tool for IR thermographic inversions in ST40.

physics.plasm-ph↗