arXiv subjects

Matteo Fasano

Publications and source records attributed to Matteo Fasano.

10 recordsLinked to original sources

arXiv2026

High-Throughput Bayesian Optimization of Cement-Salt Hydrates Composites for Seasonal Thermochemical Energy Storage

Thermochemical energy storage (TCES) based on salt hydrates is a promising route for seasonal heat storage; however, the design of practical sorbent materials remains challenging due to a non-trivial coupling between composition, synthesis feasibility, performance, and cost. Here, focusing on salt-into-matrix cement-based composites, we demonstrate that a high-throughput experimental framework based on Bayesian optimization (BO) can be used to orchestrate the optimization process of composite materials for low-temperature TCES. The explored design space is defined by salt type, salt concentration, water-to-cement ratio, and additive-to-cement ratio, while two competing objectives are pursued in parallel, namely the specific energy and the specific energy cost. The BO-guided campaign identified Pareto-optimal composites based on CaCl$_2$, Zn(NO$_3$)$_2$, and LiCl, highlighting the promise of cement-salt combinations that have been only marginally explored, or not previously reported, in cement-based TCES systems. The best-performing formulation (LiCl-based), achieved an average specific energy of about $\SI{458}{\kilo\joule\per\kilo\gram}$, whereas CaCl$_2$- and Zn(NO$_3$)$_2$-based composites showed lower but still competitive specific energy values combined with more favorable specific energy cost. Overall, the optimized formulations improved the specific energy of previously developed cement-based materials by up to a factor of five, although it remains below that of state-of-the-art composites based on silica gel and expanded vermiculite. Nonetheless, the present materials, notably CaCl$_2$- and Zn(NO$_3$)$_2$-based composites, offer an attractive cost-to-performance balance, highlighting BO as an effective strategy for accelerated TCES materials discovery.

cond-mat.mtrl-sci↗

arXiv2025

Notes on Quantum Computing for Thermal Science

This document explores the potential of quantum computing in Thermal Science. Conceived as a living document, it will be continuously updated with experimental findings and insights for the research community in Thermal Science. By experiments, we refer both to the search for the most effective algorithms and to the performance of real quantum hardware. Those are fields that are evolving rapidly, driving a technological race to define the best architectures. The development of novel algorithms for engineering problems aims at harnessing the unique strengths of quantum computing. Expectations are high, as users seek concrete evidence of quantum supremacy - a true game changer for engineering applications. Among all heat transfer mechanisms (conduction, convection, radiation), we start with conduction as a paradigmatic test case in the field being characterized by a rich mathematical foundation for our investigations.

physics.comp-ph↗

arXiv2024

Mesoscopic modelling of bio-compatible PLGA polymers with coarse-grained molecular dynamics simulations

A challenging topic in materials engineering is the development of numerical models that can accurately predict material properties with atomistic accuracy, matching the scale and level of detail achieved by experiments. In this regard, coarse-grained (CG) molecular dynamics (MD) simulations are a popular method for achieving this goal. Despite the efforts of the scientific community, a reliable CG model with quasi-atomistic accuracy has not yet been proposed for the design and prototyping of materials, especially polymers. In this paper we describe a CG model for polymers, focusing on the bio-compatible poly(lactic-co-glycolic acid) (PLGA), based on a general parametrization strategy with a potentially broader field of applications. In this model, polymers are represented with finite-size ellipsoids, short-range interactions are accounted for with the generalized Gay-Berne potential, while electrostatic and long-range interactions are accounted for with point charges within the ellipsoids. The model was validated against its atomistic counterpart, obtained through a back-mapping process, by comparing physical properties such as glass transition temperature, thermal conductivity, and elastic moduli. We observed quantitative agreement between the atomistic and CG representations, thus opening up the possibility of adopting the proposed model to expand the domain size of typical MD simulations to dimensions comparable to those of experimental setups.

cond-mat.soft↗

arXiv2024

Pore-level Quantitative Structure-Activity Relationship (QSAR) for Water Permeation Rate in Aquaporins

Aquaporins (AQPs) and aquaglyceroporins (AQGPs) play a crucial role in regulating water transport and solute selectivity across biological membranes. Besides their biological relevance, AQPs have at-tracted growing interest as models for the design of next-generation biomimetic membranes for water filtration. In this work, we present a pore-level Quantitative Structure-Activity Relationship (QSAR) approach that relates structural and physicochemical pore descriptors with experimentally reported water permeation rates across a set of AQ(G)Ps with high-resolution 3D structures. This data-driven methodology, presented here as a proof of concept, introduces a multi-feature framework for determining pore descriptors associated with water transport efficiency in AQ(G)Ps. Applied to two compiled permeation rate datasets, this framework recapitulates determinants previously reported in single-feature studies, while also highlighting additional pore descriptors that emerge as relevant in a multi-variable context. The insights gained through this approach may, in perspective, contribute to advancing the rational design of AQP-based filtration devices and to deepening the molecular understanding of the function of these valuable macromolecules in health and disease.

q-bio.BM↗

arXiv2024

Ultrafast nano generation of acoustic waves in water via a single carbon nanotube

Generation of ultra high frequency acoustic waves in water is key to nano resolution sensing, acoustic imaging and theranostics. In this context water immersed carbon nanotubes (CNTs) may act as an ideal optoacoustic source, due to their nanometric radial dimensions, peculiar thermal properties and broad band optical absorption. The generation mechanism of acoustic waves in water, upon excitation of both a single-wall (SW) and a multi-wall (MW) CNT with laser pulses of temporal width ranging from 5 ns down to ps, is theoretically investigated via a multi-scale approach. We show that, depending on the combination of CNT size and laser pulse duration, the CNT can act as a thermophone or a mechanophone. As a thermophone, the CNT acts as a nanoheater for the surrounding water, which, upon thermal expansion, launches the pressure wave. As a mechanophone, the CNT acts as a nanopiston, its thermal expansion directly triggering the pressure wave in water. Activation of the mechanophone effect is sought to trigger few nanometers wavelength sound waves in water, matching the CNT acoustic frequencies. This is at variance with respect to the commonly addressed case of water-immersed single metallic nano-objects excited with ns laser pulses, where only the thermophone effect significantly contributes. The present findings might be of impact in fields ranging from nanoscale non-destructive testing to water dynamics at the meso- to nano-scale.

cond-mat.mes-hall↗

arXiv2023

Enhancing ReaxFF for Molecular Dynamics Simulations of Lithium-Ion Batteries: An interactive reparameterization protocol

Lithium-ion batteries (LIBs) are crucial for the green economy, powering portable electronics, electric vehicles, and renewable energy systems. The solid-electrolyte interphase (SEI) is vital for LIB operation, performance, and safety. SEI forms due to thermal instability at the anode-electrolyte interface, with electrolyte reduction products stabilizing it as an electrochemical buffer. This article aims to enhance the parametrization of the ReaxFF force field for accurate molecular dynamics (MD) simulations of SEI in LIBs. Focus is on Lithium Fluoride (LiF), an inorganic salt with favorable properties in the passivation layer. The protocol heavily relies on Python libraries for atomistic simulations, enabling robust automation of reparameterization steps. The proposed configurations and dataset enable the new ReaxFF to accurately represent the solid nature of LiF and improve mass transport property prediction in MD simulations. Optimized ReaxFF surpasses previous force fields by adjusting lithium diffusivity, resulting in a significant improvement in room temperature prediction by two orders of magnitude. However, our comprehensive investigation reveals ReaxFF's strong sensitivity to the training set, challenging its ability to interpolate the potential energy surface. Consequently, the current ReaxFF formulation is suitable for modeling specific phenomena by utilizing the proposed interactive reparameterization protocol and constructing a dataset. This work is an important step towards refining ReaxFF for precise reactive MD simulations, shedding light on challenges and limitations in force field parametrization. The demonstrated limitations underscore the potential for developing more advanced force fields through our interactive reparameterization protocol, enabling accurate and comprehensive MD simulations in the future.

cond-mat.mtrl-sci↗

arXiv2022

Mesoscopic modeling and experimental validation of thermal and mechanical properties of polypropylene nanocomposites reinforced by graphene-based fillers

The development of nanocomposites relies on structure-property relations, which necessitate multiscale modeling approaches. This study presents a modelling framework that exploits mesoscopic models to predict the thermal and mechanical properties of nanocomposites starting from their molecular structure. In detail, mesoscopic models of polypropylene (PP) and graphene based nanofillers (Graphene (Gr), Graphene Oxide (GO), and reduced Graphene Oxide (rGO)) are considered. The newly developed mesoscopic model for the PP/Gr nanocomposite provides mechanistic information on the thermal and mechanical properties at the filler-matrix interface, which can be then exploited to enhance the prediction accuracy of traditional continuum simulations by calibrating the thermal and mechanical properties of the filler-matrix interface. Once validated through a dedicated experimental campaign, this multiscale model demonstrates that with the modest addition of nanofillers (up to 2 wt.%), the Young's modulus and thermal conductivity show up to 35% and 25% enhancement, respectively, while the Poisson's ratio slightly decreases. Among the different combinations tested, PP/Gr nanocomposite shows the best mechanical properties, whereas PP/rGO demonstrates the best thermal conductivity. This validated mesoscopic model can contribute to the development of smart materials with enhanced mechanical and thermal properties based on polypropylene, especially for mechanical, energy storage, and sensing applications.

cond-mat.mtrl-sci↗

arXiv2022

The impact of physicochemical features of carbon electrodes on the capacitive performance of supercapacitors: A machine learning approach

Hybrid electric vehicles and portable electronic systems use supercapacitors for energy storage owing to their fast charging discharging rates, long life cycle, and low maintenance. Specific capacitance is regarded as one of the most important performance-related characteristics of a supercapacitor's electrode. In the current study, Machine Learning (ML) algorithms were used to determine the impact of various physicochemical properties of carbon-based materials on the capacitive performance of electric double-layer capacitors. Published experimental datasets from 147 references (4899 data entries) were extracted and then used to train and test the ML models, to determine the relative importance of electrode material features on specific capacitance. These features include current density, pore volume, pore size, presence of defects, potential window, specific surface area, oxygen, and nitrogen content of the carbon-based electrode material. Additionally, categorical variables as the testing method, electrolyte, and carbon structure of the electrodes are considered as well. Among five applied regression models, an extreme gradient boosting model was found to best correlate those features with the capacitive performance, highlighting that the specific surface area, the presence of nitrogen doping, and the potential window are the most significant descriptors for the specific capacitance. These findings are summarized in a modular and open-source application for estimating the capacitance of supercapacitors given, as only inputs, the features of their carbon-based electrodes, the electrolyte and testing method. In perspective, this work introduces a new wide dataset of carbon electrodes for supercapacitors extracted from the experimental literature, also giving an instance of how electrochemical technology can benefit from ML models.

cond-mat.mtrl-sci↗

arXiv2021

Minimal set of crystallographic descriptors for sorption properties in hypothetical Metal Organic Frameworks: Role in sequential learning optimization

Several studies have been recently reported in the literature on sorption properties of MOFs with a number of organic sorbates, such as ethanol and methanol. Surprisingly, still few studies have been reported on water sorbate despite its large availability, low cost and environmental sustainability, and the screening of a large number of hypothetical MOFs-water working pairs for engineering applications is still challenging. Based on a recently reported database of over 5000 hypothetical MOFs, a first contribution of this study is the identification of the minimal set of crystallographic descriptors underpinning the most important sorption properties of MOFs for \ch{CO2} and, importantly, for \ch{H2O}. Furthermore, a comprehensive comparison of several Sequential Learning (SL) algorithms for MOFs properties optimization is carried out and the role played by the above minimal set of crystallographic descriptors clarified. In sorption-based energy transformations, thermodynamic limits of important figures of merit (e.g. maximum specific energy) depend both on operating conditions and equilibrium sorption properties in a wide range of sorbate coverage values. The access to the latter properties is often incomplete, with essential quantities such as equilibrium adsorption isotherms spanning over the full sorbate coverage range and values of the isosteric heat being only partially available. As a result, this may prevent the computation of objective functions during the optimization procedure. We propose a fast procedure for optimizing specific energy in a closed sorption energy storage system with the only access to the water Henry coefficient at a fixed temperature value and to the specific surface area.

cond-mat.other↗

arXiv2017

Passive high-yield seawater desalination at below one sun by modular and low-cost distillation

Although seawater is abundant, desalination is energy-intensive and expensive. Using the sun as an energy source is attractive for desalinating seawater; however, the performance of state-of-the-art passive devices is unsatisfactory when operated at less than one sun ($<$ $1$ $kW$ $m^{-2}$). Here, we present a completely passive, modular, and low-cost solar thermal distiller for seawater desalination. Each distillation stage is made of two opposed hydrophilic layers separated by a hydrophobic microporous membrane, and it does not require further mechanical ancillaries. Under realistic laboratory and outdoor conditions, we obtained a distillate flow rate of almost $3$ $L$ $m^{-2}$ $h^{-1}$ from seawater at less than one sun - twice the yield of recent passive device reported in the literature. In perspective, theoretical modelling suggests that the distiller has the potential to further doubling the peak flow rate observed in the current experiments. This layout can satisfy freshwater needs in isolated and impoverished communities, as well as realize self-sufficient floating installations or provide freshwater in emergency conditions.

cond-mat.other↗