arXiv subjects

Matteo Calandra

Publications and source records attributed to Matteo Calandra.

At least 109 records · Page 6Linked to original sources

arXiv2015

Dissociation products and structures of solid H2S at strong compression

Hydrogen sulfides have recently received a great deal of interest due to the record high superconducting temperatures of up to 203 K observed on strong compression of dihydrogen sulfide (H2S). A joint theoretical and experimental study is presented in which decomposition products and structures of compressed H2S are characterized, and their superconducting properties are calculated. In addition to the experimentally known H2S and H3S phases, our first-principles structure searches have identified several energetically competitive stoichiometries that have not been reported previously; H2S3, H3S2, and H4S3. In particular, H4S3 is predicted to be thermodynamically stable within a large pressure range of 25-113 GPa. High-pressure room-temperature X-ray diffraction measurements confirm the presence of H3S and H4S3 through decomposition of H2S that emerge at 27 GPa and coexist with residual H2S, at least up to the highest pressure studied in our experiments of 140 GPa. Electron-phonon coupling calculations show that H4S3 has a small Tc of below 2 K, and that H2S is mainly responsible for the observed superconductivity of samples prepared at low temperature (<100K).

cond-mat.supr-con↗

arXiv2015

First-principles theory of field-effect doping in transition-metal dichalcogenides: Structural properties, electronic structure, Hall coefficient, and electrical conductivity

We investigate how field-effect doping affects the structural properties, the electronic structure and the Hall coefficient of few-layers transition metal dichalcogenides by using density-functional theory. We consider mono-, bi-, and trilayers of the H polytype of MoS2, MoSe2, MoTe2, WS2, and WSe2 and provide a full database of electronic structures and Hall coefficients for hole and electron doping. We find that, for both electron and hole doping, the electronic structure depends on the number of layers and cannot be described by a rigid band shift. Furthermore, it is important to relax the structure under the asymmetric electric field. Interestingly, while the width of the conducting channel depends on the doping, the number of occupied bands at each given k point is almost uncorrelated with the thickness of the doping-charge distribution. Finally, we calculate within the constant-relaxation-time approximation the electrical conductivity and the inverse Hall coefficient. We demonstrate that in some cases the charge determined by Hall-effect measurements can deviate from the real charge by up to 50%. For hole-doped MoTe2 the Hall charge has even the wrong polarity at low temperature. We provide the mapping between the doping charge and the Hall coefficient. In the appendix we present more than 250 band structures for all doping levels of the transition-metal dichalcogenides considered within this work.

cond-mat.mes-hall↗

arXiv2015

Density-functional calculation of static screening in 2D materials: the long-wavelength dielectric function of graphene

We calculate the long-wavelength static screening properties of both neutral and doped graphene in the framework of density-functional theory. We use a plane-wave approach with periodic images in the third dimension and truncate the Coulomb interactions to eliminate spurious interlayer screening. We carefully address the issue of extracting two dimensional dielectric properties from simulated three-dimensional potentials. We compare this method with analytical expressions derived for two dimensional massless Dirac fermions in the random phase approximation. We evaluate the contributions of the deviation from conical bands, exchange-correlation and local-fields. For momenta smaller than twice the Fermi wavevector, the static screening of graphene within the density-functional perturbative approach agrees with the results for conical bands within random phase approximation and neglecting local fields. For larger momenta, we find that the analytical model underestimates the static dielectric function by $\approx 10%$, mainly due to the conical band approximation.

cond-mat.mtrl-sci↗

arXiv2015

Electronic and vibrational properties of $\textup{TiSe}_2$ in the charge-density wave phase from first principles

We study the charge-density wave phase in $\textup{TiSe}_2$ by using first principle calculations. We show that, regardless of the local functional used and as long as the cell parameters are in agreement with the experiment, density-functional calculations are able to reproduce not only the structural instability of $\textup{TiSe}_2$, but also the effective distortion observed in the experiments. We study the electronic structure evolution of the system under the charge-density wave deformation. In particular, we show that the energy bands for the distorted superstructure, unfolded into the original Brillouin zone, are in reasonable agreement with angle-resolved photoemission spectroscopy (ARPES) data taken at low temperature. On the contrary, the energy bands for the undistorted structure are not in good agreement with ARPES at high temperature. Motivated by these results, we investigate the effect of the correlation on the electrons of the localized Ti-$d$ orbitals by using the LDA+$U$ method. We show that within this approximation the electronic bands for both the undistorted and distorted structure are in very good agreement with ARPES. On the other hand, the $U$ eliminates the phonon instability of the system. Some possible explanations for this counter intuitive result are proposed. Particularly, the possibility of taking into account the dependence of the parameter $U$ from the atomic positions is suggested.

cond-mat.mes-hall↗

arXiv2015

Hydrogen sulphide at high pressure: a strongly-anharmonic phonon-mediated superconductor

We use first principles calculations to study structural, vibrational and superconducting properties of H$_2$S at pressures $P\ge 200$ GPa. The inclusion of zero point energy leads to two different possible dissociations of H$_2$S, namely 3H$_2$S $\to$ 2H$_3$S + S and 5H$_2$S $\to$ 3H$_3$S + HS$_2$, where both H$_3$S and HS$_2$ are metallic. For H$_3$S, we perform non-perturbative calculations of anharmonic effects within the self-consistent harmonic approximation and show that the harmonic approximation strongly overestimates the electron-phonon interaction ($λ\approx 2.64$ at 200 GPa) and T$_c$. Anharmonicity hardens HS bond-stretching modes and softens H--S bond-bending modes. As a result, the electron-phonon coupling is suppressed by $30\%$ ($λ\approx 1.84$ at 200 GPa). Moreover, while at the harmonic level T$_c$ decreases with increasing pressure, the inclusion of anharmonicity leads to a T$_c$ that is almost independent of pressure. High pressure hydrogen sulfide is a strongly anharmonic superconductor.

cond-mat.supr-con↗

arXiv2015

Universal enhancement of superconductivity in two dimensional semiconductors at low doping by electron-electron interaction

In two-dimensional multivalley semiconductors, at low doping, even a moderate electron-electron interaction enhances the response to any perturbation inducing a valley polarization. If the valley polarization is due to the electron-phonon coupling, the electron-electron interaction results in an enhancement of the superconducting critical temperature. By performing first principles calculations beyond density functional theory, we prove that this effect accounts for the unconventional doping-dependence of the superconducting transition-temperature (T$_c$) and of the magnetic susceptibility measured in Li$_x$ZrNCl. By finding the conditions for a maximal T$_c$ enhancement, we show how weakly-doped two-dimensional semiconductors provide a route towards high T$_c$ superconductivity.

cond-mat.supr-con↗

arXiv2014

First-principles calculations of phonon frequencies, lifetimes and spectral functions from weak to strong anharmonicity: the example of palladium hydrides

The variational stochastic self-consistent harmonic approximation is combined with the calculation of third-order anharmonic coefficients within density-functional perturbation theory and the "$2n+1$" theorem to calculate anharmonic properties of crystals. It is demonstrated that in the perturbative limit the combination of these two methods yields the perturbative phonon linewidth and frequency shift in a very efficient way, avoiding the explicit calculation of fourth-order anharmonic coefficients. Moreover, it also allows calculating phonon lifetimes and inelastic neutron scattering spectra in solids where the harmonic approximation breaks down and a non-perturbative approach is required to deal with anharmonicity. To validate our approach, we calculate the anharmonic phonon linewidth in the strongly anharmonic palladium hydrides. We show that due to the large anharmonicity of hydrogen optical modes the inelastic neutron scattering spectra are not characterized by a Lorentzian line-shape, but by a complex structure including satellite peaks.

cond-mat.mtrl-sci↗

arXiv2014

Two-dimensional analysis of the double-resonant 2D Raman mode in bilayer graphene

By computing the double-resonant Raman scattering cross-section completely from first principles and including electron-electron interaction at the $GW$ level, we unravel the dominant contributions for the double-resonant 2D-mode in bilayer graphene. We show that, in contrast to previous works, the so-called inner processes are dominant and that the 2D-mode lineshape is described by three dominant resonances around the $K$ point. We show that the splitting of the TO phonon branch in $Γ-K$ direction, as large as 12 cm$^{-1}$ in $GW$ approximation, is of great importance for a thorough description of the 2D-mode lineshape. Finally, we present a method to extract the TO phonon splitting and the splitting of the electronic bands from experimental data.

cond-mat.mes-hall↗

arXiv2014

Phonon-limited resistivity of graphene by first-principle calculations: electron-phonon interactions, strain-induced gauge field and Boltzmann equation

Electron-phonon coupling in graphene is extensively modeled and simulated from first principles. We find that using an accurate model for the polarizations of the acoustic phonon modes is crucial to obtain correct numerical results. The interactions between electrons and acoustic phonon modes, the gauge field and deformation potential, are calculated at the DFT level in the framework of linear response. The zero-momentum limit of acoustic phonons is interpreted as a strain pattern, allowing the calculation of the acoustic gauge field parameter in the GW approximation. The role of electronic screening on the electron-phonon matrix elements is investigated. We then solve the Boltzmann equation semi-analytically in graphene, including both acoustic and optical phonon scattering. We show that, in the Bloch-Grüneisen and equipartition regimes, the electronic transport is mainly ruled by the unscreened acoustic gauge field, while the contribution due to the deformation potential is negligible and strongly screened. By comparing with experimental data, we show that the contribution of acoustic phonons to resistivity is doping- and substrate-independent. The DFT+GW approach underestimates this contribution to resistivity by about 30 %. Above 270K, the calculated resistivity underestimates the experimental one more severely, the underestimation being larger at lower doping. We show that, beside remote phonon scattering, a possible explanation for this disagreement is the electron-electron interaction that strongly renormalizes the coupling to intrinsic optical-phonon modes. Finally, after discussing the validity of the Matthiessen rule in graphene, we derive simplified analytical solutions of the Boltzmann equation to extract the coupling to acoustic phonons, related to the strain-induced gauge field, directly from experimental data.

cond-mat.mtrl-sci↗

arXiv2014

Electrochemical doping of few layer ZrNCl from first-principles: electronic and structural properties in field-effect configuration

We develop a first-principles theoretical approach to doping in field-effect devices. The method allows for calculation of the electronic structure as well as complete structural relaxation in field-effect configuration using density-functional theory. We apply our approach to ionic-liquid-based field-effect doping of monolayer, bilayer, and trilayer ZrNCl and analyze in detail the structural changes induced by the electric field. We show that, contrary to what is assumed in previous experimental works, only one ZrNCl layer is electrochemically doped and that this induces large structural changes within the layer. Surprisingly, despite these structural and electronic changes, the density of states at the Fermi energy is independent of the doping. Our findings imply a substantial revision of the phase diagram of electrochemically doped ZrNCl and elucidate crucial differences with superconductivity in Li intercalated bulk ZrNCl.

cond-mat.mes-hall↗

arXiv2014

Electron-Phonon Interactions and the Intrinsic Electrical Resistivity of Graphene

We present a first-principles study of the temperature- and density-dependent intrinsic electrical resistivity of graphene. We use density-functional theory and density-functional perturbation theory together with very accurate Wannier interpolations to compute all electronic and vibrational properties and electron-phonon coupling matrix elements; the phonon-limited resistivity is then calculated within a Boltzmann-transport approach. An effective tight-binding model, validated against first-principles results, is also used to study the role of electron-electron interactions at the level of many-body perturbation theory. The results found are in excellent agreement with recent experimental data on graphene samples at high carrier densities and elucidate the role of the different phonon modes in limiting electron mobility. Moreover, we find that the resistivity arising from scattering with transverse acoustic phonons is 2.5 times higher than that from longitudinal acoustic phonons. Last, high-energy, optical, and zone-boundary phonons contribute as much as acoustic phonons to the intrinsic electrical resistivity even at room temperature and become dominant at higher temperatures.

cond-mat.mtrl-sci↗

arXiv2013

Chemically-exfoliated single-layer MoS$_2$ : stability, lattice dynamics and catalytic adsorption from first principles

Chemically and mechanically exfoliated MoS$_2$ single-layer samples have substantially different properties. While mechanically exfoliated single-layers are mono-phase (1H polytype with Mo in trigonal prismatic coordination), the chemically exfoliated samples show coexistence of three different phases, 1H, 1T (Mo in octahedral coordination) and 1T$^{'}$ (a distorted $2\times 1$ 1T-superstructure). By using first-principles calculations, we investigate the energetics and the dynamical stability of the three phases. We show that the 1H phase is the most stable one, while the metallic 1T phase, strongly unstable, undergoes a phase transition towards a metastable and insulating 1T$^{'}$ structure composed of separated zig-zag chains. We calculate electronic structure, phonon dispersion, Raman frequencies and intensities for the 1T$^{'}$ structure. We provide a microscopical description of the J$_1$, J$_2$ and J$_3$ Raman features first detected more then $20$ years ago, but unexplained up to now. Finally, we show that H adsorbates, that are naturally present at the end of the chemical exfoliation process, stabilize the 1T$^{\prime}$ over the 1H one.

cond-mat.mtrl-sci↗

arXiv2013

Anharmonic free energies and phonon dispersions from the stochastic self-consistent harmonic approximation: application to platinum and palladium hydrides

Harmonic calculations based on density-functional theory are generally the method of choice for the description of phonon spectra of metals and insulators. The inclusion of anharmonic effects is, however, delicate as it relies on perturbation theory requiring a considerable amount of computer time, fast increasing with the cell size. Furthermore, perturbation theory breaks down when the harmonic solution is dynamically unstable or the anharmonic correction of the phonon energies is larger than the harmonic frequencies themselves.We present a stochastic implementation of the self-consistent harmonic approximation valid to treat anharmonicity at any temperature in the non-perturbative regime. The method is based on the minimization of the free energy with respect to a trial density matrix described by an arbitrary harmonic Hamiltonian. The minimization is performed with respect to all the free parameters in the trial harmonic Hamiltonian, namely, equilibrium positions, phonon frequencies and polarization vectors. The gradient of the free energy is calculated following a stochastic procedure. The method can be used to calculate thermodynamic properties, dynamical properties and anharmonic corrections to the Eliashberg function of the electron-phonon coupling. The scaling with the system size is greatly improved with respect to perturbation theory. The validity of the method is demonstrated in the strongly anharmonic palladium and platinum hydrides. In both cases we predict a strong anharmonic correction to the harmonic phonon spectra, far beyond the perturbative limit. In palladium hydrides we calculate thermodynamic properties beyond the quasiharmonic approximation, while in PtH we demonstrate that the high superconducting critical temperatures at 100 GPa predicted in previous calculations based on the harmonic approximation are strongly suppressed when anharmonic effects are included.

cond-mat.mtrl-sci↗

arXiv2013

First-Principles Theory of Anharmonicity and the Inverse Isotope Effect in Superconducting Palladium-Hydride Compounds

Palladium hydrides display the largest isotope effect anomaly known in literature. Replacement of hydrogen with the heavier isotopes leads to higher superconducting temperatures, a behavior inconsistent with harmonic theory. Solving the self-consistent harmonic approximation by a stochastic approach, we obtain the anharmonic free energy, the thermal expansion and the superconducting properties fully ab initio. We find that the phonon spectra are strongly renormalized by anharmonicity far beyond the perturbative regime. Superconductivity is phonon mediated, but the harmonic approximation largely overestimates the superconducting critical temperatures. We explain the inverse isotope effect, obtaining a -0.38 value for the isotope coefficient in good agreement with experiments, hydrogen anharmonicity being the main responsible for the isotope anomaly.

cond-mat.supr-con↗

arXiv2013

Projector augmented wave calculation of x-ray absorption spectra at the L2,3 edges

We develop a technique based on density functional theory and the projector augmented wave method in order to obtain the x-ray absorption cross section at a general edge, both in the electric dipole and quadrupole approximations. The method is a generalization of Taillefumier et al., PRB 66, 195107 (2002). We apply the method to the calculation of the Cu L2,3 edges in fcc copper and cuprite (Cu2O), and to the S L2,3 edges in molybdenite (2H-MoS2). The role of core-hole effects, modeled in a supercell approach, as well as the decomposition of the spectrum into different angular momentum channels are studied in detail. In copper we find that the best agreement with experimental data is obtained when core-hole effects are neglected. On the contrary, core-hole effects need to be included both in Cu2O and 2H-MoS2. Finally we show that a non-negligible component of S L2,3 edges in 2H-MoS2 involves transition to states with s character at all energy scales. The inclusion of this angular momentum channel is mandatory to correctly describe the angular dependence of the measured spectra. We believe that transitions to s character states are quantitatively significant at the L2,3 edges of third row elements from Al to Ar.

cond-mat.mtrl-sci↗

arXiv2013

Anharmonic phonons in few layer MoS$_2$: Raman spectroscopy of ultra low energy compression and shear modes

Molybdenum disulfide (MoS$_2$) is a promising material for making two-dimensional crystals and flexible electronic and optoelectronic devices at the nanoscale. MoS$_2$ flakes can show high mobilities and have even been integrated in nanocircuits . A fundamental requirement for such use is efficient thermal transport. Electronic transport generates heat which needs to be evacuated, more crucially so in nanostructures. Anharmonic phonon-phonon scattering is the dominant intrinsic limitation to thermal transport in insulators. Here, using appropriate samples, ultra-low energy Raman spectroscopy and first principles calculations, we provide a full experimental and theoretical description of compression and shear modes of few-layer (FL) MoS$_2$. We demonstrate that the compression modes are strongly anharmonic with a marked enhancement of phonon-phonon scattering as the number of layers is reduced, most likely a general feature of nanolayered materials with weak interlayer coupling.

cond-mat.mtrl-sci↗

arXiv2012

Anharmonic suppression of Charge density wave in 2H-NbS$_2$

The temperature dependence of the phonon spectrum in the superconducting transition metal dichalcogenide 2H-NbS$_2$ is measured by diffuse and inelastic x-ray scattering. A deep, wide and strongly temperature dependent softening, of the two lowest energy longitudinal phonons bands, appears along the $\mathrm{ΓM}$ symmetry line in reciprocal space. In sharp contrast to the iso-electronic compounds 2H-NbSe$_2$, the soft phonons energies are finite, even at very low temperature, and no charge density wave instability occurs, in disagreement with harmonic ab-initio calculations. We show that 2H-NbS$_2$ is at the verge of the charge density wave transition and its occurrence is only suppressed by the large anharmonic effects. Moreover, the anharmonicity and the electron phonon coupling both show a strong in-plane anisotropy.

cond-mat.supr-con↗

arXiv2012

Local and non-local electron-phonon couplings in K3Picene and the effect of metallic screening

We analyze the properties of electron-phonon couplings in K3Picene by exploiting a molecular orbital representation derived in the maximally localized Wannier function formalism. This allows us to go beyond the analysis done in Phys. Rev. Lett. 107, 137006 (2011), and separate not only the intra- and intermolecular phonon contributions but also the local and non-local electronic states in the electron-phonon matrix elements. Despite the molecular nature of the crystal, we find that the purely molecular contributions (Holstein-like couplings where the local deformation potential is coupled to intramolecular phonons) account for only 20% of the total electron-phonon interaction lambda. In particular, the Holstein-like contributions to lambda in K3Picene are four times smaller than those computed for an isolated neutral molecule, as they are strongly screened by the metallic bands of the doped crystal. Our findings invalidate the use of molecular electron-phonon calculations to estimate the total electron-phonon coupling in metallic picene, and possibly in other doped metallic molecular crystals. The major contribution (80%) to lambda in K3Picene comes from non-local couplings due to phonon modulated hoppings. We show that the crystal geometry together with the molecular picene structure leads to a strong 1D spatial anisotropy of the non-local couplings. Finally, based on the parameters derived from our density functional theory calculations, we propose a lattice modelization of the electron-phonon couplings in K3Picene which gives 90% of ab-initio lambda.

cond-mat.supr-con↗