arXiv Science⌕ Search

arXiv subjects

Matt Luckcuck

Publications and source records attributed to Matt Luckcuck.

At least 19 recordsLinked to original sources

Proceedings Eighth International Workshop on Formal Methods for Autonomous Systems

This EPTCS volume contains the papers from the Eighth International Workshop on Formal Methods for Autonomous Systems (FMAS 2026), which was held on the 17th and 18th of November 2026. FMAS 2026 was co-located with the 27th International Conference on Formal Engineering Methods (ICFEM), and hosted at the Leonardo Royal Grand Harbour Hotel in Southampton.

cs.LO↗

Predictive Varanus: Combining CSP Conformance Monitoring with Predictive LTL Runtime Verification

Runtime Verification is well suited to autonomous and robotic systems because it checks the behaviour that is actually observed during execution. Its main limitation, however, is that it is usually reactive: the monitor detects a violation only after the system has already performed a bad event. This can be too late in domains where failures are costly or unsafe. In this paper we present PREDICTIVE VARANUS, a two-stage verification pipeline that combines VARANUS, a runtime verifier that uses models written in the process algebra Communicating Sequential Processes (CSP), with predictive runtime verification for LTL. A CSP model is first used as a conformance gate over the observed event trace; the same model is then translated into a Buchi automaton that constrains the futures explored by a predictive LTL monitor. In this way, out-of-model behaviour is rejected immediately, while model-consistent prefixes can be classified as already guaranteeing satisfaction, already forcing violation, or still being inconclusive for the monitored temporal property. We formalise the combined monitor, explain its implementation, and illustrate the approach on a robotic rover for nuclear-store inspection. The case study shows how the combination of CSP validation and predictive LTL can provide earlier verdicts than standard runtime monitoring while reusing an existing design-time CSP model.

cs.RO↗

A Compositional Approach to Verifying Modular Robotic Systems

Robotic systems used in safety-critical scenarios often rely on modular software architectures, and increasingly include autonomous components. Verifying that these modular robotic systems behave as expected requires approaches that can cope with, and preferably take advantage of, this inherent modularity. This paper describes a compositional approach to specifying the nodes in robotic systems built using the Robot Operating System (ROS), where each node is specified using First-Order Logic (FOL) Assume-Guarantee contracts that link the specification to the ROS implementation. We introduce inference rules that facilitate the composition of these node-level contracts to derive system-level properties. We also present a novel Domain-Specific Language, the ROS Contract Language (RCL), which captures a node's FOL specification and links this contract to its implementation. RCL contracts can be automatically translated, by our tool Vanda, into executable monitors; which we use to verify the contracts at runtime. We illustrate our approach through the specification and verification of an autonomous rover engaged in the remote inspection of a nuclear site, and finish with smaller examples that illustrate other useful features of our framework.

cs.LO↗

Engineering Reliable Autonomous Systems: Challenges and Solutions

Engineering reliable autonomous systems is an important and growing topic in computer science. As autonomous systems become more prevalent, easy-to-use techniques for building them reliably are increasingly important. This workshop report captures and expands on the discussions at the Lorentz Center Workshop "Engineering Reliable Autonomous Systems" (ERAS), held from 10 to 14 June 2024. The workshop was co-organised by the organisers of the Workshop on Formal Methods for Autonomous Systems (FMAS) and the Workshop on Agents and Robots for reliable Engineered Autonomy (AREA). It brought together members of the FMAS and AREA communities, industry practitioners, and representatives from sectors where autonomous systems pose distinctive engineering challenges. The workshop focused on three main research topics: techniques for verification and validation of autonomous systems; engineering real-world autonomous systems; and software architectures for safe autonomous systems. Its main outcome is a catalogue of challenges in these areas and, most importantly, a pathway to solutions. Some challenges can already be tackled by techniques that are well known in academia but have not yet become regularly used in practice. Other challenges remain unresolved and require further research. This roadmap is intended to support future research and industrial collaboration.

cs.RO↗

An Abstract Architecture for Explainable Autonomy in Hazardous Environments

Autonomous robotic systems are being proposed for use in hazardous environments, often to reduce the risks to human workers. In the immediate future, it is likely that human workers will continue to use and direct these autonomous robots, much like other computerised tools but with more sophisticated decision-making. Therefore, one important area on which to focus engineering effort is ensuring that these users trust the system. Recent literature suggests that explainability is closely related to how trustworthy a system is. Like safety and security properties, explainability should be designed into a system, instead of being added afterwards. This paper presents an abstract architecture that supports an autonomous system explaining its behaviour (explainable autonomy), providing a design template for implementing explainable autonomous systems. We present a worked example of how our architecture could be applied in the civil nuclear industry, where both workers and regulators need to trust the system's decision-making capabilities.

cs.RO↗

Proceedings Seventh International Workshop on Formal Methods for Autonomous Systems

This EPTCS volume contains the papers from the Seventh International Workshop on Formal Methods for Autonomous Systems (FMAS 2025), which was held between the 17th and 19th of November 2025. The goal of the FMAS workshop series is to bring together leading researchers who are using formal methods to tackle the unique challenges that autonomous systems present, so that they can publish and discuss their work with a growing community of researchers. FMAS 2025 was co-located with the 20th International Conference on integrated Formal Methods (iFM'25), hosted by Inria Paris, France at the Inria Paris Center. In total, FMAS 2025 received 16 submissions from researchers at institutions in: Canada, China, France, Germany, Ireland, Italy, Japan, the Netherlands, Portugal, Sweden, the United States of America, and the United Kingdom. Though we received fewer submissions than last year, we are encouraged to see the submissions being sent from a wide range of countries. Submissions come from both past and new FMAS authors, which shows us that the existing community appreciates the network that FMAS has built over the past 7 years, while new authors also show the FMAS community's great potential of growth.

cs.LO↗

Revisiting Formal Methods for Autonomous Robots: A Structured Survey

This paper presents the initial results from our structured literature review on applications of Formal Methods (FM) to Robotic Autonomous Systems (RAS). We describe our structured survey methodology; including database selection and associated search strings, search filters and collaborative review of identified papers. We categorise and enumerate the FM approaches and formalisms that have been used for specification and verification of RAS. We investigate FM in the context of sub-symbolic AI-enabled RAS and examine the evolution of how FM is used over time in this field. This work complements a pre-existing survey in this area and we examine how this research area has matured over time. Specifically, our survey demonstrates that some trends have persisted as observed in a previous survey. Additionally, it recognized new trends that were not considered previously including a noticeable increase in adopting Formal Synthesis approaches as well as Probabilistic Verification Techniques.

cs.RO↗

Varanus: Runtime Verification for CSP

Autonomous systems are often used in changeable and unknown environments, where traditional verification may not be suitable. Runtime Verification (RV) checks events performed by a system against a formal specification of its intended behaviour, making it highly suitable for ensuring that an autonomous system is obeying its specification at runtime. Communicating Sequential Processes (CSP) is a process algebra usually used in static verification, which captures behaviour as a trace of events, making it useful for RV as well. Further, CSP has more recently been used to specify autonomous and robotic systems. Though CSP is supported by two extant model checkers, so far it has no RV tool. This paper presents Varanus, an RV tool that monitors a system against an oracle built from a CSP specification. This approach enables the reuse without modifications of a specification that was built, e.g during the system's design. We describe the tool, apply it to a simulated autonomous robotic rover inspecting a nuclear waste store, empirically comparing its performance to two other RV tools using different languages, and demonstrate how it can detect violations of the specification. Varanus can synthesise a monitor from a CSP process in roughly linear time, with respect to the number of states and transitions in the model; and checks each event in roughly constant time.

cs.LO↗

Adventures in FRET and Specification

This paper gives an overview of previous work in which the authors used NASA's Formal Requirement Elicitation Tool (FRET) to formalise requirements. We discuss four case studies where we used FRET to capture the system's requirements. These formalised requirements subsequently guided the case study specifications in a combination of formal paradigms. For each case study we summarise insights gained during this process, exploring the expressiveness and the potential interoperability of these approaches. Our experience confirms FRET's suitability as a framework for the elicitation and understanding of requirements and for providing traceability from requirements to specification.

cs.SE↗

Proceedings Sixth International Workshop on Formal Methods for Autonomous Systems

This EPTCS volume contains the papers from the Sixth International Workshop on Formal Methods for Autonomous Systems (FMAS 2024), which was held between the 11th and 13th of November 2024. FMAS 2024 was co-located with 19th International Conference on integrated Formal Methods (iFM'24), hosted by the University of Manchester in the United Kingdom, in the University of Manchester's Core Technology Facility.

cs.LO↗

Proceedings Fifth International Workshop on Formal Methods for Autonomous Systems

This EPTCS volume contains the proceedings for the Fifth International Workshop on Formal Methods for Autonomous Systems (FMAS 2023), which was held on the 15th and 16th of November 2023. FMAS 2023 was co-located with 18th International Conference on integrated Formal Methods (iFM) (iFM'22), organised by Leiden Institute of Advanced Computer Science of Leiden University. The workshop itself was held at Scheltema Leiden, a renovated 19th Century blanket factory alongside the canal. FMAS 2023 received 25 submissions. We received 11 regular papers, 3 experience reports, 6 research previews, and 5 vision papers. The researchers who submitted papers to FMAS 2023 were from institutions in: Australia, Canada, Colombia, France, Germany, Ireland, Italy, the Netherlands, Sweden, the United Kingdom, and the United States of America. Increasing our number of submissions for the third year in a row is an encouraging sign that FMAS has established itself as a reputable publication venue for research on the formal modelling and verification of autonomous systems. After each paper was reviewed by three members of our Programme Committee we accepted a total of 15 papers: 8 long papers and 7 short papers.

cs.AI↗

Proceedings Fourth International Workshop on Formal Methods for Autonomous Systems (FMAS) and Fourth International Workshop on Automated and verifiable Software sYstem DEvelopment (ASYDE)

This EPTCS volume contains the joint proceedings for the fourth international workshop on Formal Methods for Autonomous Systems (FMAS 2022) and the fourth international workshop on Automated and verifiable Software sYstem DEvelopment (ASYDE 2022), which were held on the 26th and 27th of September 2022. FMAS 2022 and ASYDE 2022 were held in conjunction with 20th International Conference on Software Engineering and Formal Methods (SEFM'22), at Humboldt University in Berlin. For FMAS, this year's workshop was our return to having in-person attendance after two editions of FMAS that were entirely online because of the restrictions necessitated by COVID-19. We were also keen to ensure that FMAS 2022 remained easily accessible to people who were unable to travel, so the workshop facilitated remote presentation and attendance. The goal of FMAS is to bring together leading researchers who are using formal methods to tackle the unique challenges presented by autonomous systems, to share their recent and ongoing work. Autonomous systems are highly complex and present unique challenges for the application of formal methods. Autonomous systems act without human intervention, and are often embedded in a robotic system, so that they can interact with the real world. As such, they exhibit the properties of safety-critical, cyber-physical, hybrid, and real-time systems. We are interested in work that uses formal methods to specify, model, or verify autonomous and/or robotic systems; in whole or in part. We are also interested in successful industrial applications and potential directions for this emerging application of formal methods.

cs.LO↗

Modelling the Turtle Python library in CSP

Software verification is an important tool in establishing the reliability of critical systems. One potential area of application is in the field of robotics, as robots take on more tasks in both day-to-day areas and highly specialised domains. Robots are usually given a plan to follow, if there are errors in this plan the robot will not perform reliably. The capability to check plans for errors in advance could prevent this. Python is a popular programming language in the robotics domain, through the use of the Robot Operating System (ROS) and various other libraries. Python's Turtle package provides a mobile agent, which we formally model here using Communicating Sequential Processes (CSP). Our interactive toolchain CSP2Turtle with CSP model and Python components, enables Turtle plans to be verified in CSP before being executed in Python. This means that certain classes of errors can be avoided, and provides a starting point for more detailed verification of Turtle programs and more complex robotic systems. We illustrate our approach with examples of robot navigation and obstacle avoidance in a 2D grid-world.

cs.RO↗

Why just FRET when you can Refactor? Retuning FRETISH Requirements

Formal verification of a software system relies on formalising the requirements to which it should adhere, which can be challenging. While formalising requirements from natural-language, we have dependencies that lead to duplication of information across many requirements, meaning that a change to one requirement causes updates in several places. We propose to adapt code refactorings for NASA's Formal Requirements Elicitation Tool (FRET), our tool-of-choice. Refactoring is the process of reorganising software to improve its internal structure without altering its external behaviour; it can also be applied to requirements, to make them more manageable by reducing repetition. FRET automatically translates requirements (written in its input language Fretish) into Temporal Logic, which enables us to formally verify that refactoring has preserved the requirements' underlying meaning. In this paper, we present four refactorings for Fretish requirements and explain their utility. We describe the application of one of these refactorings to the requirements of a civilian aircraft engine software controller, to decouple the dependencies from the duplication, and analyse how this changes the number of requirements and the number of repetitions. We evaluate our approach using Spot, a tool for checking equivalence of Temporal Logic specifications.

cs.SE↗

FRETting about Requirements: Formalised Requirements for an Aircraft Engine Controller

[Context & motivation] Eliciting requirements that are detailed and logical enough to be amenable to formal verification is a difficult task. Multiple tools exist for requirements elicitation and some of these also support formalisation of requirements in a way that is useful for formal methods. [Question/problem] This paper reports on our experience of using the FRET alongside our industrial partner. The use case that we investigate is an aircraft engine controller. In this context, we evaluate the use of FRET to bridge the communication gap between formal methods experts and aerospace industry specialists. [Principal ideas/results] We describe our journey from ambiguous, natural-language requirements to concise, formalised FRET requirements. We include our analysis of the formalised requirements from the perspective of patterns, translation into other formal methods and the relationship between parent-child requirements in this set. We also provide insight into lessons learned throughout this process and identify future improvements to FRET. [Contribution] Previous experience reports have been published by the FRET team, but this is the first such report of an industrial use case that was written by researchers that have not been involved FRET's development.

cs.SE↗

Towards Refactoring FRETish Requirements

Like software, requirements evolve and change frequently during the development process. Refactoring is the process of reorganising software without changing its behaviour, to make it easier to understand and modify. We propose refactoring for formalised requirements to reduce repetition in the requirement set so that they are easier to maintain as the system and requirements evolve. This work-in-progress paper describes our motivation for and initial approach to refactoring requirements in NASA's Formal Requirements Elicitation Tool (FRET). This work was directly triggered by our experience with an industrial aircraft engine software controller use case. In this paper, we reflect on the requirements that were obtained and, with a view to their maintainability, propose and outline functionality for refactoring FRETISH requirements.

cs.SE↗

Proceedings Third Workshop on Formal Methods for Autonomous Systems

Autonomous systems are highly complex and present unique challenges for the application of formal methods. Autonomous systems act without human intervention, and are often embedded in a robotic system, so that they can interact with the real world. As such, they exhibit the properties of safety-critical, cyber-physical, hybrid, and real-time systems. This EPTCS volume contains the proceedings for the third workshop on Formal Methods for Autonomous Systems (FMAS 2021), which was held virtually on the 21st and 22nd of October 2021. Like the previous workshop, FMAS 2021 was an online, stand-alone event, as an adaptation to the ongoing COVID-19 restrictions. Despite the challenges this brought, we were determined to build on the success of the previous two FMAS workshops. The goal of FMAS is to bring together leading researchers who are tackling the unique challenges of autonomous systems using formal methods, to present recent and ongoing work. We are interested in the use of formal methods to specify, model, or verify autonomous and/or robotic systems; in whole or in part. We are also interested in successful industrial applications and potential future directions for this emerging application of formal methods.

cs.LO↗

A Methodology for Developing a Verifiable Aircraft Engine Controller from Formal Requirements

Verification of complex, safety-critical systems is a significant challenge. Manual testing and simulations are often used, but are only capable of exploring a subset of the system's reachable states. Formal methods are mathematically-based techniques for the specification and development of software, which can provide proofs of properties and exhaustive checks over a system's state space. In this paper, we present a formal requirements-driven methodology, applied to a model of an aircraft engine controller that has been provided by our industrial partner. Our methodology begins by formalising the controller's natural-language requirements using the (pre-existing) Formal Requirements Elicitation Tool (FRET), iteratively, in consultation with our industry partner. Once formalised, FRET can automatically translate the requirements to enable their verification alongside a Simulink model of the aircraft engine controller; the requirements can also guide formal verification using other approaches. These two parallel streams in our methodology seek to combine the results from formal requirements elicitation, classical verification approaches, and runtime verification; to support the verification of aerospace systems modelled in Simulink, from the requirements phase through to execution. Our methodology harnesses the power of formal methods in a way that complements existing verification techniques, and supports the traceability of requirements throughout the verification process. This methodology streamlines the process of developing verifiable aircraft engine controllers, by ensuring that the requirements are formalised up-front and useable during development. In this paper we give an overview of (FRET), describe our methodology and work to-date on the formalisation and verification of the requirements, and outline future work using our methodology.

cs.SE↗