arXiv Science⌕ Search

arXiv subjects

Mats G. Larson

Publications and source records attributed to Mats G. Larson.

At least 37 records · Page 2Linked to original sources

Error Estimates for Finite Element Approximations of Viscoelastic Dynamics: The Generalized Maxwell Model

We prove error estimates for a finite element approximation of viscoelastic dynamics based on continuous Galerkin in space and time, both in energy norm and in $L^2$ norm. The proof is based on an error representation formula using a discrete dual problem and a stability estimate involving the kinetic, elastic, and viscoelastic energies. To set up the dual error analysis and to prove the basic stability estimates, it is natural to formulate the problem as a system involving evolution equations for the viscoelastic stress, the displacements, and the velocities. The equations for the viscoelastic stress can, however, be solved analytically in terms of the deviatoric strain velocity, and therefore, the viscoelastic stress can be eliminated from the system, resulting in a system for displacements and velocities.

math.NA↗

Cut finite element method for divergence free approximation of incompressible flow: a Lagrange multiplier approach

In this note we design a cut finite element method for a low order divergence free element applied to a boundary value problem subject to Stokes' equations. For the imposition of Dirichlet boundary conditions we consider either Nitsche's method or a stabilized Lagrange multiplier method. In both cases the normal component of the velocity is constrained using a multiplier, different from the standard pressure approximation. The divergence of the approximate velocities is pointwise zero over the whole mesh domain, and we derive optimal error estimates for the velocity and pressures, where the error constant is independent of how the physical domain intersects the computational mesh, and of the regularity of the pressure multiplier imposing the divergence free condition.

math.NA↗

The Geometric Structure of Fully-Connected ReLU Layers

We formalize and interpret the geometric structure of $d$-dimensional fully connected ReLU layers in neural networks. The parameters of a ReLU layer induce a natural partition of the input domain, such that the ReLU layer can be significantly simplified in each sector of the partition. This leads to a geometric interpretation of a ReLU layer as a projection onto a polyhedral cone followed by an affine transformation, in line with the description in [doi:10.48550/arXiv.1905.08922] for convolutional networks with ReLU activations. Further, this structure facilitates simplified expressions for preimages of the intersection between partition sectors and hyperplanes, which is useful when describing decision boundaries in a classification setting. We investigate this in detail for a feed-forward network with one hidden ReLU-layer, where we provide results on the geometric complexity of the decision boundary generated by such networks, as well as proving that modulo an affine transformation, such a network can only generate $d$ different decision boundaries. Finally, the effect of adding more layers to the network is discussed.

cs.LG↗

Hybridized Isogeometric Method for Elliptic Problems on CAD Surfaces with Gaps

We develop a method for solving elliptic partial differential equations on surfaces described by CAD patches that may have gaps/overlaps. The method is based on hybridization using a three-dimensional mesh that covers the gap/overlap between patches. Thus, the hybrid variable is defined on a three-dimensional mesh, and we need to add appropriate normal stabilization to obtain an accurate solution, which we show can be done by adding a suitable term to the weak form. In practical applications, the hybrid mesh may be conveniently constructed using an octree to efficiently compute the necessary geometric information. We prove error estimates and present several numerical examples illustrating the application of the method to different problems, including a realistic CAD model.

math.NA↗

Space-Time CutFEM on Overlapping Meshes: Simple Discontinuous Mesh Evolution

We present a cut finite element method for the heat equation on two overlapping meshes: a stationary background mesh and an overlapping mesh that evolves inside/"on top" of it. Here the overlapping mesh is prescribed a simple discontinuous evolution, meaning that its location, size, and shape as functions of time are discontinuous and piecewise constant. For the discrete function space, we use continuous Galerkin in space and discontinuous Galerkin in time, with the addition of a discontinuity on the boundary between the two meshes. The finite element formulation is based on Nitsche's method. The simple discontinuous mesh evolution results in a space-time discretization with a slabwise product structure between space and time which allows for existing analysis methodologies to be applied with only minor modifications. We follow the analysis methodology presented by Eriksson and Johnson in [1, 2]. The greatest modification is the introduction of a Ritzlike "shift operator" that is used to obtain the discrete strong stability needed for the error analysis. The shift operator generalizes the original analysis to some methods for which the discrete subspace at one time does not lie in the space of the stiffness form at the subsequent time. The error analysis consists of an a priori error estimate that is of optimal order with respect to both time step and mesh size. We also present numerical results for a problem in one spatial dimension that verify the analytic error convergence orders.

math.NA↗

Space-Time CutFEM on Overlapping Meshes: Simple Continuous Mesh Motion

We present a cut finite element method for the heat equation on two overlapping meshes: a stationary background mesh and an overlapping mesh that moves around inside/"on top" of it. Here the overlapping mesh is prescribed a simple continuous motion, meaning that its location as a function of time is continuous and piecewise linear. For the discrete function space, we use continuous Galerkin in space and discontinuous Galerkin in time, with the addition of a discontinuity on the boundary between the two meshes. The finite element formulation is based on Nitsche's method and also includes an integral term over the space-time boundary between the two meshes that mimics the standard discontinuous Galerkin time-jump term. The simple continuous mesh motion results in a space-time discretization for which standard analysis methodologies either fail or are unsuitable. We therefore employ what seems to be a relatively new energy analysis framework that is general and robust enough to be applicable to the current setting. The energy analysis consists of a stability estimate that is slightly stronger than the standard basic one and an a priori error estimate that is of optimal order with respect to both time step and mesh size. We also present numerical results for a problem in one spatial dimension that verify the analytic error convergence orders.

math.NA↗

Critical time-step size analysis and mass scaling by ghost-penalty for immersogeometric explicit dynamics

In this article, we study the effect of small-cut elements on the critical time-step size in an immersogeometric context. We analyze different formulations for second-order (membrane) and fourth-order (shell-type) equations, and derive scaling relations between the critical time-step size and the cut-element size for various types of cuts. In particular, we focus on different approaches for the weak imposition of Dirichlet conditions: by penalty enforcement and with Nitsche's method. The stability requirement for Nitsche's method necessitates either a cut-size dependent penalty parameter, or an additional ghost-penalty stabilization term is necessary. Our findings show that both techniques suffer from cut-size dependent critical time-step sizes, but the addition of a ghost-penalty term to the mass matrix serves to mitigate this issue. We confirm that this form of `mass-scaling' does not adversely affect error and convergence characteristics for a transient membrane example, and has the potential to increase the critical time-step size by orders of magnitude. Finally, for a prototypical simulation of a Kirchhoff-Love shell, our stabilized Nitsche formulation reduces the solution error by well over an order of magnitude compared to a penalty formulation at equal time-step size.

math.NA↗

The augmented Lagrangian method as a framework for stabilised methods in computational mechanics

In this paper we will review recent advances in the application of the augmented Lagrange multiplier method as a general approach for generating multiplier--free stabilised methods. We first show how the method generates Galerkin/Least Squares type schemes for equality constraints and then how it can be extended to develop new stabilised methods for inequality constraints. Application to several different problems in computational mechanics is given.

math.NA↗

Extension Operators for Trimmed Spline Spaces

We develop a discrete extension operator for trimmed spline spaces consisting of piecewise polynomial functions of degree $p$ with $k$ continuous derivatives. The construction is based on polynomial extension from neighboring elements together with projection back into the spline space. We prove stability and approximation results for the extension operator. Finally, we illustrate how we can use the extension operator to construct a stable cut isogeometric method for an elliptic model problem.

math.NA↗

A simple nonconforming tetrahedral element for the Stokes equations

In this paper we apply a nonconforming rotated bilinear tetrahedral element to the Stokes problem in $\mathbb{R}^3$. We show that the element is stable in combination with a piecewise linear, continuous, approximation of the pressure. This gives an approximation similar to the well known continuous $P^2-P^1$ Taylor$-$Hood element, but with fewer degrees of freedom. The element is a stable non-conforming low order element which fulfils Korn's inequality, leading to stability also in the case where the Stokes equations are written on stress form for use in the case of free surface flow.

math.NA↗

On the Design of Locking Free Ghost Penalty Stabilization and the Relation to CutFEM with Discrete Extension

In this note, we develop a new stabilization mechanism for cut finite element methods that generalizes previous approaches of ghost penalty type in two ways: (1) The quantity that is stabilized and (2) The choice of elements that are connected in the stabilization. In particular, we can stabilize functionals of the discrete function such as finite element degrees of freedom. We subsequently show that the kernel of our ghost penalty operator defines a finite element space based on discrete extensions in the spirit of those introduced in Burman, E.; Hansbo, P. and Larson, M. G., CutFEM Based on Extended Finite Element Spaces, arXiv2101.10052, 2021.

math.NA↗

Augmented Lagrangian approach to deriving discontinuous Galerkin methods for nonlinear elasticity problems

We use the augmented Lagrangian formalism to derive discontinuous Galerkin formulations for problems in nonlinear elasticity. In elasticity stress is typically a symmetric function of strain, leading to symmetric tangent stiffness matrices in Newtons method when conforming finite elements are used for discretization. By use of the augmented Lagrangian framework, we can also obtain symmetric tangent stiffness matrices in discontinuous Galerkin methods. We suggest two different approaches and give examples from plasticity and from large deformation hyperelasticity.

cs.CE↗

The Finite Cell Method with Least Squares Stabilized Nitsche Boundary Conditions

We apply the recently developed least squares stabilized symmetric Nitsche method for enforcement of Dirichlet boundary conditions to the finite cell method. The least squares stabilized Nitsche method in combination with finite cell stabilization leads to a symmetric positive definite stiffness matrix and relies only on elementwise stabilization, which does not lead to additional fill in. We prove a priori error estimates and bounds on the condition numbers.

math.NA↗

Nitsche's Finite Element Method for Model Coupling in Elasticity

We develop a Nitsche finite element method for a model of Euler--Bernoulli beams with axial stiffness embedded in a two--dimensional elastic bulk domain. The beams have their own displacement fields, and the elastic subdomains created by the beam network are triangulated independently and are coupled to the beams weakly by use of Nitsche's method in the framework of hybridization.

math.NA↗

Conservative Discontinuous Cut Finite Element Methods

We develop a conservative cut finite element method for an elliptic coupled bulk-interface problem. The method is based on a discontinuous Galerkin framework where stabilization is added in such a way that we retain conservation on macro elements containing one element with a large intersection with the domain and possibly a number of elements with small intersections. We derive error estimates and present confirming numerical results

math.NA↗

Error estimates for the Smagorinsky turbulence model: enhanced stability through scale separation and numerical stabilization

In the present work we show some results on the effect of the Smagorinsky model on the stability of the associated perturbation equation. We show that in the presence of a spectral gap, such that the flow can be decomposed in a large scale with moderate gradient and a small amplitude fine scale with arbitratry gradient, the Smagorinsky model admits stability estimates for perturbations, with exponential growth depending only on the large scale gradient. We then show in the context of stabilized finite element methods that the same result carries over to the approximation and that in this context, for suitably chosen finite element spaces the Smagorinsky model acts as a stabilizer yielding close to optimal error estimates in the $L^2$-norm for smooth flows in the pre-asymptotic high Reynolds number regime.

math.NA↗

CutFEM Based on Extended Finite Element Spaces

We develop a general framework for construction and analysis of discrete extension operators with application to unfitted finite element approximation of partial differential equations. In unfitted methods so called cut elements intersected by the boundary occur and these elements must in general by stabilized in some way. Discrete extension operators provides such a stabilization by modification of the finite element space close to the boundary. More precisely, the finite element space is extended from the stable interior elements over the boundary in a stable way which also guarantees optimal approximation properties. Our framework is applicable to all standard nodal based finite elements of various order and regularity. We develop an abstract theory for elliptic problems and associated parabolic time dependent partial differential equations and derive a priori error estimates. We finally apply this to some examples of partial differential equations of different order including the interface problems, the biharmonic operator and the sixth order triharmonic operator.

math.NA↗

Explicit Time Stepping for the Wave Equation using CutFEM with Discrete Extension

In this note we develop a fully explicit cut finite element method for the wave equation. The method is based on using a standard leap frog scheme combined with an extension operator that defines the nodal values outside of the domain in terms of the nodal values inside the domain. We show that the mass matrix associated with the extended finite element space can be lumped leading to a fully explicit scheme. We derive stability estimates for the method and provide optimal order a priori error estimates. Finally, we present some illustrating numerical examples.

math.NA↗