arXiv subjects

Matias Turkulainen

Publications and source records attributed to Matias Turkulainen.

10 recordsLinked to original sources

arXiv2026

TileGS: Tile-Local Depth Binning for Gaussian Splatting Rasterization

Real-time 3D Gaussian Splatting (3DGS) achieves high rendering quality, but standard rasterization still traverses a globally sorted tile stream that creates long per-tile ranges and heavy geometry-attribute traffic. We present TileGS, a tile-local reorganization of Gaussian splatting. TileGS turns each long tile range into a sequence of shorter depth-local ranges, rasterizes those ranges in front-to-back order, and applies selective repair where coarse ordering is insufficient to match baseline compositing. Across a 9-scene benchmark on desktop and laptop Ada GPUs, our default No-GW (No Geometry-Write) variant delivers a mean 1.44x raster-kernel speedup on RTX 4090 and mean end-to-end frame speedups of 1.069x on RTX 4090 and 1.094x on RTX 1000 Ada over gsplat--a widely used optimized open-source 3DGS implementation--while matching the gsplat output up to numerical noise (|Delta PSNR| < 0.001 dB, |Delta SSIM| < 0.001, |Delta LPIPS| < 0.001). Full-suite RTX 4090 Nsight Compute profiling reveals TileGS is faster despite lower SM throughput, lower active-warp occupancy, and higher DRAM traffic, while total SASS thread instructions fall by 1.26x. Source-attributed profiling confirms that geometry attributes dominate the remaining memory pressure (85.8% of total raster traffic and 88.6% of excess sectors). Together, these counters support the interpretation that TileGS improves raster performance by reducing effective raster traversal work, rather than by reducing byte volume, improving coalescing, increasing occupancy, or directly reducing measured warp divergence.

cs.GR↗

arXiv2026

Cross-View Splatter: Feed-Forward View Synthesis with Georeferenced Images

We present Cross-View Splatter, a feed-forward method that predicts pixel-aligned Gaussian splats for outdoor scenes captured at ground level AND by satellite. Faithful reconstructions require good camera coverage, but ground imagery is time-consuming and hard to capture at scale for large outdoor scenes. Fortunately, satellite imagery can provide a global geometric prior that is easy to access via public APIs. Cross-View Splatter fuses orthorectified satellite views with GPS-tagged ground photos to predict Gaussian splats in a unified 3D coordinate frame. By aligning ground and bird's-eye feature representations, our model improves scene coverage and novel-view synthesis, compared to ground imagery alone. We train on curated georeferenced datasets and paired satellite-terrain data, mined from open mapping services. We evaluate our method on a new benchmark for novel-view synthesis with georeferenced imagery allowing comparison to prior state-of-the-art methods. Our code and data preparation will be available at https://nianticspatial.github.io/cross-view-splatter/.

cs.CV↗

arXiv2025

3D Gaussian Splatting with Fisheye Images: Field of View Analysis and Depth-Based Initialization

We present the first evaluation of 3D Gaussian Splatting methods on real fisheye imagery with fields of view above 180\textdegree{}. Our study evaluates Fisheye-GS \cite{liao2024fisheyegslightweightextensiblegaussian} and 3DGUT \cite{wu20253dgut} on indoor and outdoor scenes captured with 200\textdegree{} fisheye cameras, with the aim of assessing the practicality of wide-angle reconstruction under severe distortion. By comparing reconstructions at 200\textdegree{}, 160\textdegree{}, and 120\textdegree{} field-of-view, we show that both methods achieve their best results at 160\textdegree{}, which balances scene coverage with image quality, while distortion at 200\textdegree{} degrades performance. To address the common failure of Structure-from-Motion (SfM) initialization at such wide angles, we introduce a depth-based alternative using UniK3D (Universal Camera Monocular 3D Estimation) \cite{piccinelli2025unik3d}. This represents the first application of UniK3D to fisheye imagery beyond 200\textdegree{}, despite the model not being trained on such data. With the number of predicted points controlled to match SfM for fairness, UniK3D produces geometrically accurate reconstructions that rival or surpass SfM, even in challenging scenes with fog, glare, or open sky. These results demonstrate the feasibility of fisheye-based 3D Gaussian Splatting and provides a benchmark for future research on wide-angle reconstruction from sparse and distorted inputs.

cs.CV↗

arXiv2025

FIORD: A Fisheye Indoor-Outdoor Dataset with LIDAR Ground Truth for 3D Scene Reconstruction and Benchmarking

The development of large-scale 3D scene reconstruction and novel view synthesis methods mostly rely on datasets comprising perspective images with narrow fields of view (FoV). While effective for small-scale scenes, these datasets require large image sets and extensive structure-from-motion (SfM) processing, limiting scalability. To address this, we introduce a fisheye image dataset tailored for scene reconstruction tasks. Using dual 200-degree fisheye lenses, our dataset provides full 360-degree coverage of 5 indoor and 5 outdoor scenes. Each scene has sparse SfM point clouds and precise LIDAR-derived dense point clouds that can be used as geometric ground-truth, enabling robust benchmarking under challenging conditions such as occlusions and reflections. While the baseline experiments focus on vanilla Gaussian Splatting and NeRF based Nerfacto methods, the dataset supports diverse approaches for scene reconstruction, novel view synthesis, and image-based rendering.

cs.CV↗

arXiv2024

DeSplat: Decomposed Gaussian Splatting for Distractor-Free Rendering

Gaussian splatting enables fast novel view synthesis in static 3D environments. However, reconstructing real-world environments remains challenging as distractors or occluders break the multi-view consistency assumption required for accurate 3D reconstruction. Most existing methods rely on external semantic information from pre-trained models, introducing additional computational overhead as pre-processing steps or during optimization. In this work, we propose a novel method, DeSplat, that directly separates distractors and static scene elements purely based on volume rendering of Gaussian primitives. We initialize Gaussians within each camera view for reconstructing the view-specific distractors to separately model the static 3D scene and distractors in the alpha compositing stages. DeSplat yields an explicit scene separation of static elements and distractors, achieving comparable results to prior distractor-free approaches without sacrificing rendering speed. We demonstrate DeSplat's effectiveness on three benchmark data sets for distractor-free novel view synthesis. See the project website at https://aaltoml.github.io/desplat/.

cs.CV↗

arXiv2024

AGS-Mesh: Adaptive Gaussian Splatting and Meshing with Geometric Priors for Indoor Room Reconstruction Using Smartphones

Geometric priors are often used to enhance 3D reconstruction. With many smartphones featuring low-resolution depth sensors and the prevalence of off-the-shelf monocular geometry estimators, incorporating geometric priors as regularization signals has become common in 3D vision tasks. However, the accuracy of depth estimates from mobile devices is typically poor for highly detailed geometry, and monocular estimators often suffer from poor multi-view consistency and precision. In this work, we propose an approach for joint surface depth and normal refinement of Gaussian Splatting methods for accurate 3D reconstruction of indoor scenes. We develop supervision strategies that adaptively filters low-quality depth and normal estimates by comparing the consistency of the priors during optimization. We mitigate regularization in regions where prior estimates have high uncertainty or ambiguities. Our filtering strategy and optimization design demonstrate significant improvements in both mesh estimation and novel-view synthesis for both 3D and 2D Gaussian Splatting-based methods on challenging indoor room datasets. Furthermore, we explore the use of alternative meshing strategies for finer geometry extraction. We develop a scale-aware meshing strategy inspired by TSDF and octree-based isosurface extraction, which recovers finer details from Gaussian models compared to other commonly used open-source meshing tools. Our code is released in https://xuqianren.github.io/ags_mesh_website/.

cs.CV↗

arXiv2024

Gaussian Splatting in Mirrors: Reflection-Aware Rendering via Virtual Camera Optimization

Recent advancements in 3D Gaussian Splatting (3D-GS) have revolutionized novel view synthesis, facilitating real-time, high-quality image rendering. However, in scenarios involving reflective surfaces, particularly mirrors, 3D-GS often misinterprets reflections as virtual spaces, resulting in blurred and inconsistent multi-view rendering within mirrors. Our paper presents a novel method aimed at obtaining high-quality multi-view consistent reflection rendering by modelling reflections as physically-based virtual cameras. We estimate mirror planes with depth and normal estimates from 3D-GS and define virtual cameras that are placed symmetrically about the mirror plane. These virtual cameras are then used to explain mirror reflections in the scene. To address imperfections in mirror plane estimates, we propose a straightforward yet effective virtual camera optimization method to enhance reflection quality. We collect a new mirror dataset including three real-world scenarios for more diverse evaluation. Experimental validation on both Mirror-Nerf and our real-world dataset demonstrate the efficacy of our approach. We achieve comparable or superior results while significantly reducing training time compared to previous state-of-the-art.

cs.CV↗

arXiv2024

gsplat: An Open-Source Library for Gaussian Splatting

gsplat is an open-source library designed for training and developing Gaussian Splatting methods. It features a front-end with Python bindings compatible with the PyTorch library and a back-end with highly optimized CUDA kernels. gsplat offers numerous features that enhance the optimization of Gaussian Splatting models, which include optimization improvements for speed, memory, and convergence times. Experimental results demonstrate that gsplat achieves up to 10% less training time and 4x less memory than the original implementation. Utilized in several research projects, gsplat is actively maintained on GitHub. Source code is available at https://github.com/nerfstudio-project/gsplat under Apache License 2.0. We welcome contributions from the open-source community.

cs.CV↗

arXiv2024

DN-Splatter: Depth and Normal Priors for Gaussian Splatting and Meshing

High-fidelity 3D reconstruction of common indoor scenes is crucial for VR and AR applications. 3D Gaussian splatting, a novel differentiable rendering technique, has achieved state-of-the-art novel view synthesis results with high rendering speeds and relatively low training times. However, its performance on scenes commonly seen in indoor datasets is poor due to the lack of geometric constraints during optimization. In this work, we explore the use of readily accessible geometric cues to enhance Gaussian splatting optimization in challenging, ill-posed, and textureless scenes. We extend 3D Gaussian splatting with depth and normal cues to tackle challenging indoor datasets and showcase techniques for efficient mesh extraction. Specifically, we regularize the optimization procedure with depth information, enforce local smoothness of nearby Gaussians, and use off-the-shelf monocular networks to achieve better alignment with the true scene geometry. We propose an adaptive depth loss based on the gradient of color images, improving depth estimation and novel view synthesis results over various baselines. Our simple yet effective regularization technique enables direct mesh extraction from the Gaussian representation, yielding more physically accurate reconstructions of indoor scenes.

cs.CV↗

arXiv2024

Gaussian Splatting on the Move: Blur and Rolling Shutter Compensation for Natural Camera Motion

High-quality scene reconstruction and novel view synthesis based on Gaussian Splatting (3DGS) typically require steady, high-quality photographs, often impractical to capture with handheld cameras. We present a method that adapts to camera motion and allows high-quality scene reconstruction with handheld video data suffering from motion blur and rolling shutter distortion. Our approach is based on detailed modelling of the physical image formation process and utilizes velocities estimated using visual-inertial odometry (VIO). Camera poses are considered non-static during the exposure time of a single image frame and camera poses are further optimized in the reconstruction process. We formulate a differentiable rendering pipeline that leverages screen space approximation to efficiently incorporate rolling-shutter and motion blur effects into the 3DGS framework. Our results with both synthetic and real data demonstrate superior performance in mitigating camera motion over existing methods, thereby advancing 3DGS in naturalistic settings.

cs.CV↗