arXiv subjects

Mathis Schmieder

Publications and source records attributed to Mathis Schmieder.

5 recordsLinked to original sources

arXiv2026

Characterization of Helicopter Rotor Blade Modulation in UHF and Microwave Bands

This paper presents metrics and measurement methods for the experimental characterization of helicopter rotor blade modulation of the wireless propagation channel. Broadband bistatic channel measurements were conducted at three widely separated carrier frequencies (302 MHz in the UHF band, 4.9 GHz in the C-band, and 27.1 GHz in the Ka-band) for three military helicopters (CH-53, Tiger, and UMAT) at the Bundeswehr Technical and Airworthiness Center for Aircraft in Manching, Germany. The time-variant channel was analyzed in terms of the Doppler Power Spectrum and the RMS Doppler spread, the Doppler spectrogram, and the Power Time Profile. The RMS Doppler spread values were found to be moderate (up to 106 Hz), which is attributable to the predominantly lateral blade motion relative to the line-of-sight path. The Power Time Profiles revealed periodic blockage attenuations of up to 15 dB at Ka-band, increasing significantly with the carrier frequency; at 302 MHz, the blockage attenuation does not exceed 2.3 dB and the RMS Doppler spread stays below 10 Hz. The measured blockage attenuation was modeled using the double knife-edge diffraction model, showing good agreement with the measurements. The distinct micro-Doppler signatures visible in the spectrograms are identified as a potential resource for helicopter classification and passive radar applications.

eess.SP↗

arXiv2024

Advancements in UWB: Paving the Way for Sovereign Data Networks in Healthcare Facilities

Ultra-Wideband (UWB) technology re-emerges as a groundbreaking ranging technology with its precise micro-location capabilities and robustness. This paper highlights the security dimensions of UWB technology, focusing in particular on the intricacies of device fingerprinting for authentication, examined through the lens of state-of-the-art deep learning techniques. Furthermore, we explore various potential enhancements to the UWB standard that could realize a sovereign UWB data network. We argue that UWB data communication holds significant potential in healthcare and ultra-secure environments, where the use of the common unlicensed 2.4~GHz band-centric wireless technology is limited or prohibited. A sovereign UWB network could serve as an alternative, providing secure localization and short-range data communication in such environments.

cs.NI↗

arXiv2020

Measurement and Characterization of an Indoor Industrial Environment at 3.7 and 28 GHz

Fifth generation (5G) mobile networks are expected to play an increasing role in industrial communication with private mobile communication networks deployed on company premises. For planning, standardization and product development, it is crucial to to thoroughly understand the radio channel characteristics of such environments. Frequencies around 3.7 GHz were already reserved by regulation authorities and to meet the increasing demand for higher bandwidths, spectrum in the millimeter wave range around 28 GHz is targeted. This paper presents a wideband channel measurement campaign at both 3.7 and 28 GHz with direction-of-arrival information at 28 GHz. The results are compared to the 3GPP TR 38.901 Indoor Factory model and to two other recent papers. Evaluation of path loss and RMS delay and angle spread show the unique nature of industrial indoor environments.

eess.SP↗

arXiv2020

THz Channel Sounding: Design and Validation of a High Performance Channel Sounder at 300 GHz

In this paper, a novel instrument-based time-domain THz channel sounder for the 300 GHz band is introduced. The performance is characterized by conducted measurements and verified by over-the-air measurements, which confirm the sensitivity and highlight the temporal resolution of the setup. Dynamic range, maximum measurable path loss and phase stability are evaluated. The results show that the performance in terms of dynamic range and maximum measurable path loss is, to the best knowledge of the authors, unprecedented in this frequency range.

eess.SP↗

arXiv2019

Directional Wideband Channel Measurements at 28 GHz in an Industrial Environment

With the expected adoption of millimeter wave technologies for industrial communication, it is fundamentally important to properly understand the radio channel characteristics of such environments. This paper presents the setup, scenario and results of a measurement campaign at 28 GHz in a machine hall. The radio channel was measured with a bandwidth of 2 GHz and both large scale parameters and directional information were extracted. Evaluation of the power delay profiles shows that the channel contains dense multipath components. A path loss model is parameterized and blockage losses, RMS delay and angle spreads are evaluated. Comparison with the 3GPP TR 38.901 channel model shows that none of the currently defined scenarios is a fit for industrial settings. This emphasizes the need for a newly defined scenario with an industry specific parameter set.

eess.SP↗