arXiv subjects

Mathis Bode

Publications and source records attributed to Mathis Bode.

At least 37 records · Page 2Linked to original sources

arXiv2025

Analysis of In-cylinder Flow Structures and Turbulence in a Laboratory Scale Engine using Direct Numerical Simulations

In-cylinder flow structures and turbulence characteristics are investigated using direct numerical simulations (DNS) in a laboratory-scale engine at technically relevant engine speeds (1500 and 2500 rpm at full load). The data is computed for 12 compression-expansion cycles at each engine speed with initial conditions derived from precursor large eddy simulations (LES) validated against experimental data. Analysis of the tumble ratio indicates significant cycle-to-cycle variation, with lower variability found at higher engine speed. The process of tumble breakdown, quantified by the evolution of mean and turbulent kinetic energy, reveals distinct features between operating conditions, with delayed turbulence peaks observed at lower engine speed. Analysis of the Reynolds stress tensor demonstrates higher stress values at higher engine speed, with pronounced anisotropy near the walls and higher values around the tumble vortex core. Examination of the anisotropic Reynolds stress invariants through Lumley triangles reveals predominantly isotropic turbulence during mid-compression, transitioning to distinct anisotropic states near top dead center (TDC). The lower engine speed exhibits a stronger tendency toward one-component turbulence due to partial tumble dissipation, while the higher speed maintains a more balanced anisotropy. These findings extend previous numerical and experimental studies on turbulence development and in-cylinder flow structures during the compression stroke, providing insights for improving turbulence modeling in practical engine simulations.

physics.flu-dyn↗

arXiv2025

Direct Numerical Simulation of Hydrogen Combustion in a Real-Size IC Engine

This study presents the first Direct Numerical Simulation (DNS) of hydrogen combustion in a real-size internal combustion engine, investigating the complex dynamics of ignition, flame propagation, and flame-wall interaction under engine-relevant conditions. The simulation focuses on ultra-lean hydrogen operation at equivalence ratio $ϕ=0.4$ and 800 rpm, utilizing a state-of-the-art spectral element solver optimized for GPU architectures. The computational domain encompasses the full engine geometry. Results highlight the strong coupling between the flame dynamics and the coherent flow structures during early flame kernel development, while differential diffusion effects lead to increased reactivity at positive flame curvatures, a phenomenon that has only been studied in canonical configurations of freely propagating hydrogen/air flames. As the flame approaches the walls, distinct behavior is observed during head-on and side-wall quenching scenarios, characterized by different spatial distributions of wall heat flux. The findings provide insights into hydrogen combustion in real engines, essential for the development of clean and efficient hydrogen-fueled powertrains.

physics.flu-dyn↗

arXiv2025

Deciphering boundary layer dynamics in high-Rayleigh-number convection using 3360 GPUs and a high-scaling in-situ workflow

Turbulent heat and momentum transfer processes due to thermal convection cover many scales and are of great importance for several natural and technical flows. One consequence is that a fully resolved three-dimensional analysis of these turbulent transfers at high Rayleigh numbers, which includes the boundary layers, is possible only using supercomputers. The visualization of these dynamics poses an additional hurdle since the thermal and viscous boundary layers in thermal convection fluctuate strongly. In order to track these fluctuations continuously, data must be tapped at high frequency for visualization, which is difficult to achieve using conventional methods. This paper makes two main contributions in this context. First, it discusses the simulations of turbulent Rayleigh-Bénard convection up to Rayleigh numbers of $Ra=10^{12}$ computed with NekRS on GPUs. The largest simulation was run on 840 nodes with 3360 GPU on the JUWELS Booster supercomputer. Secondly, an in-situ workflow using ASCENT is presented, which was successfully used to visualize the high-frequency turbulent fluctuations.

physics.flu-dyn↗

arXiv2024

No sustained mean velocity in the boundary region of plane thermal convection

We study the dynamics of thermal and momentum boundary regions in three-dimensional direct numerical simulations of Rayleigh-Bénard convection for the Rayleigh number range $10^5 \le Ra \le 10^{11}$ and $Pr=0.7$. Using a Cartesian slab with horizontal periodic boundary conditions and an aspect ratio of 4, we obtain statistical homogeneity in the horizontal $x$- and $y$-directions, thus approximating best an extended convection layer relevant for most geo- and astrophysical flow applications. We observe upon canonical use of combined long-time and area averages, with averaging periods of at least 100 free-fall times, that a global coherent mean flow is practically absent and that the magnitude of the velocity fluctuations is larger than the mean by up to 2 orders of magnitude. The velocity field close to the wall is a collection of differently oriented local shear-dominated flow patches interspersed by extensive shear-free incoherent regions which can be as large as the whole cross section, unlike for a closed cylindrical convection cell of aspect ratio of the order 1. The incoherent regions occupy a $60\%$ area fraction for all Rayleigh numbers investigated here. Rather than resulting in a pronounced mean with small fluctuations about such a mean, as found in small-aspect-ratio convection, the velocity field is dominated by strong fluctuations of all three components around a non-existent or weak mean. We discuss the consequences of these observations for convection layers with larger aspect ratios, including boundary layer instabilities and the resulting turbulent heat transport.

physics.flu-dyn↗

arXiv2024

nekCRF: A next generation high-order reactive low Mach flow solver for direct numerical simulations

Exascale computing enables high-fidelity simulations of chemically reactive flows in practical geometries and conditions, and paves the way for valuable insights that can optimize combustion processes, ultimately reducing emissions and improving fuel combustion efficiency. However, this requires software that can fully leverage the capabilities of current high performance computing systems. The paper introduces nekCRF, a high-order reactive low Mach flow solver specifically designed for this purpose. Its capabilities and efficiency are showcased on the pre-exascale system JUWELS Booster, a GPU-based supercomputer at the Jülich Supercomputing Centre including a validation across diverse cases of varying complexity.

physics.comp-ph↗

arXiv2024

Application-Driven Exascale: The JUPITER Benchmark Suite

Benchmarks are essential in the design of modern HPC installations, as they define key aspects of system components. Beyond synthetic workloads, it is crucial to include real applications that represent user requirements into benchmark suites, to guarantee high usability and widespread adoption of a new system. Given the significant investments in leadership-class supercomputers of the exascale era, this is even more important and necessitates alignment with a vision of Open Science and reproducibility. In this work, we present the JUPITER Benchmark Suite, which incorporates 16 applications from various domains. It was designed for and used in the procurement of JUPITER, the first European exascale supercomputer. We identify requirements and challenges and outline the project and software infrastructure setup. We provide descriptions and scalability studies of selected applications and a set of key takeaways. The JUPITER Benchmark Suite is released as open source software with this work at https://github.com/FZJ-JSC/jubench.

cs.DC↗

arXiv2024

Influence of adversarial training on super-resolution turbulence reconstruction

Supervised super-resolution deep convolutional neural networks (CNNs) have gained significant attention for their potential in reconstructing velocity and scalar fields in turbulent flows. Despite their popularity, CNNs currently lack the ability to accurately produce high-frequency and small-scale features, and tests of their generalizability to out-of-sample flows are not widespread. Generative adversarial networks (GANs), which consist of two distinct neural networks (NNs), a generator and discriminator, are a promising alternative, allowing for both semi-supervised and unsupervised training. The difference in the flow fields produced by these two NN architectures has not been thoroughly investigated, and a comprehensive understanding of the discriminator's role has yet to be developed. This study assesses the effectiveness of the unsupervised adversarial training in GANs for turbulence reconstruction in forced homogeneous isotropic turbulence. GAN-based architectures are found to outperform supervised CNNs for turbulent flow reconstruction for in-sample cases. The reconstruction accuracy of both architectures diminishes for out-of-sample cases, though the GAN's discriminator network significantly improves the generator's out-of-sample robustness using either an additional unsupervised training step with large eddy simulation input fields and a dynamic selection of the most suitable upsampling factor. These enhance the generator's ability to reconstruct small-scale gradients, turbulence intermittency, and velocity-gradient probability density functions. The extrapolation capability of the GAN-based model is demonstrated for out-of-sample flows at higher Reynolds numbers. Based on these findings, incorporating discriminator-based training is recommended to enhance the reconstruction capability of super-resolution CNNs.

physics.flu-dyn↗

arXiv2023

Scaling Computational Fluid Dynamics: In Situ Visualization of NekRS using SENSEI

In the realm of Computational Fluid Dynamics (CFD), the demand for memory and computation resources is extreme, necessitating the use of leadership-scale computing platforms for practical domain sizes. This intensive requirement renders traditional checkpointing methods ineffective due to the significant slowdown in simulations while saving state data to disk. As we progress towards exascale and GPU-driven High-Performance Computing (HPC) and confront larger problem sizes, the choice becomes increasingly stark: to compromise data fidelity or to reduce resolution. To navigate this challenge, this study advocates for the use of in situ analysis and visualization techniques. These allow more frequent data "snapshots" to be taken directly from memory, thus avoiding the need for disruptive checkpointing. We detail our approach of instrumenting NekRS, a GPU-focused thermal-fluid simulation code employing the spectral element method (SEM), and describe varied in situ and in transit strategies for data rendering. Additionally, we provide concrete scientific use-cases and report on runs performed on Polaris, Argonne Leadership Computing Facility's (ALCF) 44 Petaflop supercomputer and Jülich Wizard for European Leadership Science (JUWELS) Booster, Jülich Supercomputing Centre's (JSC) 71 Petaflop High Performance Computing (HPC) system, offering practical insight into the implications of our methodology.

cs.DC↗

arXiv2022

Applying Physics-Informed Enhanced Super-Resolution Generative Adversarial Networks to Turbulent Premixed Combustion and Engine-like Flame Kernel Direct Numerical Simulation Data

Models for finite-rate-chemistry in underresolved flows still pose one of the main challenges for predictive simulations of complex configurations. The problem gets even more challenging if turbulence is involved. This work advances the recently developed PIESRGAN modeling approach to turbulent premixed combustion. For that, the physical information processed by the network and considered in the loss function are adjusted, the training process is smoothed, and especially effects from density changes are considered. The resulting model provides good results for a priori and a posteriori tests on direct numerical simulation data of a fully turbulent premixed flame kernel. The limits of the modeling approach are discussed. Finally, the model is employed to compute further realizations of the premixed flame kernel, which are analyzed with a scale-sensitive framework regarding their cycle-to-cycle variations. The work shows that the data-driven PIESRGAN subfilter model can very accurately reproduce direct numerical simulation data on much coarser meshes, which is hardly possible with classical subfilter models, and enables studying statistical processes more efficiently due to the smaller computing cost.

physics.flu-dyn↗

arXiv2022

Applying Physics-Informed Enhanced Super-Resolution Generative Adversarial Networks to Finite-Rate-Chemistry Flows and Predicting Lean Premixed Gas Turbine Combustors

The accurate prediction of small scales in underresolved flows is still one of the main challenges in predictive simulations of complex configurations. Over the last few years, data-driven modeling has become popular in many fields as large, often extensively labeled datasets are now available and training of large neural networks has become possible on graphics processing units (GPUs) that speed up the learning process tremendously. In fact, the successful application of deep neural networks in fluid dynamics, such as for underresolved reactive flows, is still challenging. This work advances the recently introduced PIESRGAN to reactive finite-rate-chemistry flows. However, since combustion chemistry typically acts on the smallest scales, the original approach needs to be extended. Therefore, the modeling approach of PIESRGAN is modified to accurately account for the challenges in the context of laminar finite-rate-chemistry flows. The modified PIESRGAN-based model gives good agreement in a priori and a posteriori tests in a laminar lean premixed combustion setup. Furthermore, a reduced PIESRGAN-based model is presented that solves only the major species on a reconstructed field and employs PIERSGAN lookup for the remaining species, utilizing staggering in time. The advantages of the discriminator-supported training are shown, and the usability of the new model demonstrated in the context of a model gas turbine combustor.

physics.flu-dyn↗

arXiv2022

Applying Physics-Informed Enhanced Super-Resolution Generative Adversarial Networks to Turbulent Non-Premixed Combustion on Non-Uniform Meshes and Demonstration of an Accelerated Simulation Workflow

This paper extends the methodology to use physics-informed enhanced super-resolution generative adversarial networks (PIESRGANs) for LES subfilter modeling in turbulent flows with finite-rate chemistry and shows a successful application to a non-premixed temporal jet case. This is an important topic considering the need for more efficient and carbon-neutral energy devices to fight the climate change. Multiple a priori and a posteriori results are presented and discussed. As part of this, the impact of the underlying mesh on the prediction quality is emphasized, and a multi-mesh approach is developed. It is demonstrated how LES based on PIESRGAN can be employed to predict cases at Reynolds numbers which were not used for training. Finally, the amount of data needed for a successful prediction is elaborated.

physics.flu-dyn↗

arXiv2022

Towards prediction of turbulent flows at high Reynolds numbers using high performance computing data and deep learning

In this paper, deep learning (DL) methods are evaluated in the context of turbulent flows. Various generative adversarial networks (GANs) are discussed with respect to their suitability for understanding and modeling turbulence. Wasserstein GANs (WGANs) are then chosen to generate small-scale turbulence. Highly resolved direct numerical simulation (DNS) turbulent data is used for training the WGANs and the effect of network parameters, such as learning rate and loss function, is studied. Qualitatively good agreement between DNS input data and generated turbulent structures is shown. A quantitative statistical assessment of the predicted turbulent fields is performed.

physics.flu-dyn↗

arXiv2021

Pandemic Drugs at Pandemic Speed: Infrastructure for Accelerating COVID-19 Drug Discovery with Hybrid Machine Learning- and Physics-based Simulations on High Performance Computers

The race to meet the challenges of the global pandemic has served as a reminder that the existing drug discovery process is expensive, inefficient and slow. There is a major bottleneck screening the vast number of potential small molecules to shortlist lead compounds for antiviral drug development. New opportunities to accelerate drug discovery lie at the interface between machine learning methods, in this case developed for linear accelerators, and physics-based methods. The two in silico methods, each have their own advantages and limitations which, interestingly, complement each other. Here, we present an innovative infrastructural development that combines both approaches to accelerate drug discovery. The scale of the potential resulting workflow is such that it is dependent on supercomputing to achieve extremely high throughput. We have demonstrated the viability of this workflow for the study of inhibitors for four COVID-19 target proteins and our ability to perform the required large-scale calculations to identify lead antiviral compounds through repurposing on a variety of supercomputers.

cs.DC↗

arXiv2020

The Role of Differential Diffusion during Early Flame Kernel Development under Engine Conditions -- Part II: Effect of Flame Structure and Geometry

From experimental spark ignition (SI) engine studies, it is known that the slow-down of early flame kernel development caused by the ($\mathrm{Le}>1$)-property of common transportation-fuel/air mixtures tends to increase cycle-to-cycle variations (CCV). To improve the fundamental understanding of the complex phenomena inside the flame structure of developing flame kernels, an engine-relevant DNS database is investigated in this work. Conclusive analyses are enabled by considering equivalent flame kernels and turbulent planar flames computed with $\mathrm{Le}>1$ and $\mathrm{Le}=1$. In Part I of the present study (Falkenstein et al., Combust. Flame, 2019), a reduced representation of the local mixture state based on the parameters local enthalpy, local equivalence ratio, and H-radical mass fraction was proposed for the purpose of this analysis. Here, a coupling relation for the diffusion-controlled mixture parameter local enthalpy with local flame geometry and structure is derived, characterized by the key parameters $κ$ and ${\ |\nabla c \ t|/\ |\nabla c \ |_{\mathrm{lam}}}$. The analysis shows that the large positive global mean curvature intrinsic to the flame kernel configuration may detrimentally affect the local mixture state inside the reaction zone, particularly during the initial kernel development phase. External energy supply by spark ignition may effectively bridge over this critical stage, which causes the impact of global mean flame kernel curvature to be small under the present conditions compared to the overall effect of $\mathrm{Le}\neq1$. Once ignition effects have decayed, the mixture state inside the reaction zone locally exhibits an identical dependence on $\ |\nabla c \ |$ as in a strained laminar flame. This implies that differential diffusion effects under engine-typical Karlovitz numbers are not weakened by small-scale turbulent mixing.

physics.flu-dyn↗

arXiv2020

The Role of Differential Diffusion during Early Flame Kernel Development under Engine Conditions -- Part I: Analysis of the Heat-Release-Rate Response

Although experimental evidence for the correlation between early flame kernel development and cycle-to-cycle variations (CCV) in spark ignition (SI) engines was provided long ago, there is still a lack of fundamental understanding of early flame/turbulence interactions, and accurate models for full engine simulations do not exist. Since the flame kernel is initiated with small size, i.e. with large positive curvature, differential diffusion is expected to severely alter early flame growth in non-unity-Lewis-number (${\mathrm{Le}\neq1}$) mixtures as typically used in engines. In this work, a DNS database of developing iso-octane/air flame kernels and planar flames has been established with flame conditions representative for stoichiometric engine part-load operation. Differential diffusion effects on the global heat release rate are analyzed by relating the present findings to equivalent flames computed in the ${\mathrm{Le}=1}$ limit. It is shown that in the early kernel development phase, the normal propagation velocity is significantly reduced with detrimental consequences on the global burning rate of the flame kernel. Besides this impact on the overall mass burning rate, the initial production of flame surface area by the normal propagation term in the flame area balance equation is noticeably reduced. By using the optimal estimator concept, it is shown that strong fluctuations in local heat release rate inherent to ${\mathrm{Le}\neq1}$ flames in the thin reaction zones regime are mainly contained in the parameters local equivalence ratio, enthalpy, and H-radical mass fraction. Differential diffusion couples the evolution of these parameters to the unsteady flame geometry and structure, which is analyzed in Part II of the present study (Falkenstein et al., Combust. Flame, 2019).

physics.flu-dyn↗

arXiv2019

DNS Study of the Global Heat Release Rate During Early Flame Kernel Development under Engine Conditions

Despite the high technical relevance of early flame kernel development for the reduction of cycle-to-cycle variations in spark ignition engines, there is still a need for a better fundamental understanding of the governing in-cylinder phenomena in order to enable resilient early flame growth. To isolate the effects of small- and large-scale turbulent flow motion on the young flame kernel, a three-dimensional DNS database has been designed to be representative for engine part load conditions. The analysis is focussed on flame displacement speed and flame area in order to investigate effects of flame structure and flame geometry on the global burning rate evolution. It is shown that despite a Karlovitz number of up to 13, which is at the upper range of conventional engine operation, thickening of the averaged flame structure by small-scale turbulent mixing is not observed. After ignition effects have decayed, the flame normal displacement speed recovers the behavior of a laminar unstretched premixed flame under the considered unity-Lewis-number conditions. Run-to-run variations in the global heat release rate are shown to be primarily caused by flame kernel area dynamics. The analysis of the flame area balance equation shows that turbulence causes stochastic flame kernel area growth by affecting the curvature evolution, rather than by inducing variations in total flame area production by strain. Further, it is shown that in local segments of a fully-developed planar flame with similar surface area as the investigated flame kernels, temporal variations in flame area rate-of-change occur. Contrasting to early flame kernels, these effects can be exclusively attributed to curvature variations in negatively curved flame regions.

physics.flu-dyn↗

arXiv2019

Using Physics-Informed Super-Resolution Generative Adversarial Networks for Subgrid Modeling in Turbulent Reactive Flows

Turbulence is still one of the main challenges for accurately predicting reactive flows. Therefore, the development of new turbulence closures which can be applied to combustion problems is essential. Data-driven modeling has become very popular in many fields over the last years as large, often extensively labeled, datasets became available and training of large neural networks became possible on GPUs speeding up the learning process tremendously. However, the successful application of deep neural networks in fluid dynamics, for example for subgrid modeling in the context of large-eddy simulations (LESs), is still challenging. Reasons for this are the large amount of degrees of freedom in realistic flows, the high requirements with respect to accuracy and error robustness, as well as open questions, such as the generalization capability of trained neural networks in such high-dimensional, physics-constrained scenarios. This work presents a novel subgrid modeling approach based on a generative adversarial network (GAN), which is trained with unsupervised deep learning (DL) using adversarial and physics-informed losses. A two-step training method is used to improve the generalization capability, especially extrapolation, of the network. The novel approach gives good results in a priori as well as a posteriori tests with decaying turbulence including turbulent mixing. The applicability of the network in complex combustion scenarios is furthermore discussed by employing it to a reactive LES of the Spray A case defined by the Engine Combustion Network (ECN).

cs.LG↗

arXiv2019

Deep learning at scale for subgrid modeling in turbulent flows

Modeling of turbulent flows is still challenging. One way to deal with the large scale separation due to turbulence is to simulate only the large scales and model the unresolved contributions as done in large-eddy simulation (LES). This paper focuses on two deep learning (DL) strategies, regression and reconstruction, which are data-driven and promising alternatives to classical modeling concepts. Using three-dimensional (3-D) forced turbulence direct numerical simulation (DNS) data, subgrid models are evaluated, which predict the unresolved part of quantities based on the resolved solution. For regression, it is shown that feedforward artificial neural networks (ANNs) are able to predict the fully-resolved scalar dissipation rate using filtered input data. It was found that a combination of a large-scale quantity, such as the filtered passive scalar itself, and a small-scale quantity, such as the filtered energy dissipation rate, gives the best agreement with the actual DNS data. Furthermore, a DL network motivated by enhanced super-resolution generative adversarial networks (ESRGANs) was used to reconstruct fully-resolved 3-D velocity fields from filtered velocity fields. The energy spectrum shows very good agreement. As size of scientific data is often in the order of terabytes or more, DL needs to be combined with high performance computing (HPC). Necessary code improvements for HPC-DL are discussed with respect to the supercomputer JURECA. After optimizing the training code, 396.2 TFLOPS were achieved.

physics.comp-ph↗