arXiv subjects

Mathias Ziegler

Publications and source records attributed to Mathias Ziegler.

12 recordsLinked to original sources

arXiv2026

Spectral Geometry and Dispersion-Constrained Projection of Diffusive Fields

Diffusive fields obey operator-imposed relations between spatial structure and temporal decay, yet conventional spectral filtering selects components primarily according to frequency or wavenumber magnitude. Here we show that the diffusion operator defines a spectral geometry in the joint space of spatial wavenumber and modal decay rate, where physically admissible modes occupy the manifold $\eta=\alpha|\mathbf{k}|^2$. This geometry separates spectral scale from physical consistency: high-wavenumber modes can remain diffusion-consistent, whereas lower-wavenumber modes can violate the governing dynamics. We exploit this distinction by introducing an operator residual and a finite-width soft projection that selects spectral components according to their distance from the diffusion manifold rather than their spectral magnitude. Numerical studies demonstrate robust recovery under noise, diffusivity mismatch, and finite acquisition, and reveal a consistency--retention tradeoff governed by the manifold width. Photothermal experiments further confirm that the projection suppresses off-manifold spectral content while retaining the dominant thermal response. These results establish operator consistency as a spectral-selection principle for diffusive fields and provide a geometric framework for physics-informed processing of dissipative systems.

physics.app-ph↗

arXiv2026

Structured Illumination Scanning Thermography (SISTER)

Conventional non-invasive photothermal imaging techniques are fundamentally constrained by the diffusive nature of heat transport, which causes severe energy dissipation during subsurface reconstruction. Although modulation-based approaches partially mitigate this limitation by encoding depth information into phase delay and amplitude attenuation, they remain inherently restricted by repeated temporal excitation, long acquisition times, and stitching artifacts in large-area inspection. In this work, we propose a structured illumination scanning thermography (SISTER) framework that replaces conventional temporal modulation with continuous spatial scanning under static structured illumination. The key theoretical insight is that heat diffusion is governed by a Markov semigroup, while sample motion transforms static spatial illumination into an equivalent temporal excitation through a Galilean coordinate transformation. This formulation enables dynamic-to-static reconstruction without repeated temporal modulation and provides a unified interpretation of spatial scanning and conventional signal modulation. A scanning system is integrated to implement the proposed framework together with a dynamic-to-static reconstruction algorithm for continuous subsurface defect inspection. Both numerical simulations and experimental results demonstrate that the proposed method significantly improves spatial continuity, signal-to-noise ratio, and detection capability while effectively eliminating stitching artifacts and reducing acquisition complexity. The proposed SISTER framework establishes a unified theoretical foundation for scanning photothermal imaging and provides a practical paradigm for high-efficiency, large-scale industrial non-destructive testing.

physics.app-ph↗

arXiv2026

A Unified Framework for Virtual Wave Transform: From Generalized Formulation to Excitation-Specific Projection

We present a unified theoretical framework for the mapping between diffusive and wave-like dynamics, formulated as a spectral integral operator acting on temporal fields. By introducing an analytic continuation in the complex frequency plane, we establish an explicit correspondence between thermal diffusion and a virtual wave field governed by a hyperbolic equation. This mapping is shown to define a causal, compact Fredholm operator that acts as a nonstationary low-pass filter, thereby revealing the intrinsic information loss of diffusive processes and the fundamental ill-posedness of the inverse reconstruction. Within this operator framework, we demonstrate that commonly used excitation schemes-including pulse, lock-in, chirped, and coded excitations-emerge as distinct projections onto subspaces of a single underlying transformation, corresponding to different sampling strategies of its spectral structure. This unifies previously disparate virtual wave formulations and provides a systematic interpretation of excitation design in terms of operator sampling and information encoding. The framework further generalizes to matrix-valued systems and suggests a spectral-geometric interpretation of temporal evolution across diffusive and propagative regimes.

math-ph↗

arXiv2026

Generalized Virtual-Wave Theory for Photothermal Coherence Tomography under Arbitrary Excitation Toward Non-Contact Industrial Inspection of Composite Materials

Photothermal imaging is a powerful noncontact and nondestructive technique for subsurface inspection of composite materials, yet its performance is fundamentally limited by the diffusive and irreversible nature of heat transport, leading to severe image blurring and ambiguous depth interpretation. The concept of virtual waves provides a route to overcome this limitation by linking diffusion fields to propagating wave fields, but existing approaches are largely restricted to idealized impulsive excitation. Here, we propose a generalized virtual-wave photothermal tomography framework that extends the diffusion-to-wave transformation to arbitrary boundary excitations, including pulsed, harmonic, and chirped waveforms. Starting from the heat equation with a general source term, we derive a Fredholm integral mapping between the measured diffusion field and a virtual wave field governed by a wave equation, explicitly enforcing causality and thermodynamic irreversibility. The resulting ill-posed inverse problem is solved using ADMM or truncated SVD, depending on the excitation characteristics. Numerical and experimental results demonstrate that the proposed method converts blurred thermal responses into wave-like fields with clear wavefronts and reflections, enabling improved depth localization and tomographic reconstruction. Experiments on carbon fiber reinforced polymer samples with embedded defects show enhanced contrast, sharper boundaries, and more reliable depth interpretation compared with conventional thermographic techniques. This work establishes a unified and physically grounded framework for wave-based photothermal tomography under realistic excitation conditions.

physics.app-ph↗

arXiv2026

The Spectral Domain Snell Law in Diffusion-Wave Fields

Snell law is traditionally regarded as a hallmark of phase-propagating phenomena such as optical, acoustic, elastic, electromagnetic, and quantum waves. In contrast, purely diffusive processes, such as Fourier heat conduction and chemical diffusion, are generally considered incapable of exhibiting refractive/reflective behavior. In this letter, we demonstrate that although diffusion waves including thermal diffusion, mass diffusion, Lindblad quantum diffusion, and electromagnetic diffusion do not follow Snell law in either time or frequency-domain, nevertheless they obey a spectral form of Snell law which reveals a hidden analog of wave refraction/reflection within the mathematical structure of diffusion dynamics. Remarkably, the spectral refraction ratio is governed not by the diffusion coefficient itself but by the constitutive relations of the media across the interface, establishing a new physical paradigm for diffusion-wave fields. Importantly, while each spectral eigenmode satisfies a rigorous Snell-type refraction relation, the inverse Fourier-Laplace transformation mixes these modes and suppresses any persistent real-space refraction angle, thereby reconciling the modal-level directionality with the long-standing absence of geometric refraction in diffusive systems.

physics.optics↗

arXiv2026

Generalized virtual wave reconstruction for vibrothermography: Overcoming the wavefront-free behavior and quantification challenges in the diffusion-wave field

Wavefront-free behavior and the resulting quantification difficulties are intrinsic limitations of vibrothermography due to the diffusive nature of thermal fields. This work proposes a generalized virtual wave reconstruction framework to address the absence of propagation features in thermal diffusion-wave fields and its impact on quantitative defect characterization. Unlike conventional virtual wave formulations restricted to Dirac-type excitations, the proposed approach establishes a rigorous spatiotemporal mapping between diffusion-wave fields and virtual wave fields under arbitrary heat-generation conditions without simplifying assumptions on thermo-mechanical coupling. The resulting ill-posed inversion problem is solved using truncated singular value decomposition (T-SVD) and the alternating direction method of multipliers (ADMM) to enhance numerical stability and suppress noise amplification. Numerical simulations demonstrate that the reconstructed virtual wave fields recover propagation characteristics absent in temperature distributions, leading to improved defect boundary definition, contrast enhancement, and depth-resolved analysis. Experiments on CFRP laminates validate the robustness of the approach and show significantly improved signal-to-noise ratio, spatial clarity, and defect size estimation compared with conventional thermographic processing methods.

physics.app-ph↗

arXiv2022

Nondestructive thermographic detection of internal defects using pixel-pattern based laser excitation and photothermal super resolution reconstruction

In this work, we present a novel approach to photothermal super resolution based thermographic resolution of internal defects using two-dimensional pixel pattern-based active photothermal laser heating in conjunction with subsequent numerical reconstruction to achieve a high-resolution reconstruction of internal defect structures. With the proposed adoption of pixelated patterns generated using laser coupled high-power DLP projector technology the complexity for achieving true two-dimensional super resolution can be dramatically reduced taking a crucial step forward towards widespread practical viability. Furthermore, based on the latest developments in high-power DLP projectors, we present their first application for structured pulsed thermographic inspection of macroscopic metal samples. In addition, a forward solution to the underlying inverse problem is proposed along with an appropriate heuristic to find the regularization parameters necessary for the numerical inversion in a laboratory setting. This allows the generation of synthetic measurement data, opening the door for the application of machine learning based methods for future improvements towards full automation of the method. Finally, the proposed method is experimentally validated and shown to outperform several established conventional thermographic testing techniques while conservatively improving the required measurement times by a factor of 8 compared to currently available photothermal super resolution techniques.

eess.IV↗

arXiv2022

Thermographic detection of internal defects using 2D photothermal super resolution reconstruction with sequential laser heating

Thermographic photothermal super resolution reconstruction enables the resolution of internal defects/inhomogeneities below the classical limit which is governed by the diffusion properties of thermal wave propagation. Based on a combination of the application of special sampling strategies and a subsequent numerical optimization step in post-processing, thermographic super resolution has already proven to be superior to standard thermographic methods in the detection of one-dimensional defect/inhomogeneity structures. In our work, we report an extension of the capabilities of the method for efficient detection and resolution of defect cross sections with fully two-dimensional structured laser-based heating. The reconstruction is carried out using one of two different algorithms which are proposed within this work. Both algorithms utilize the combination of several coherent measurements using convex optimization and exploit the sparse nature of defects/inhomogeneities as is typical for most nondestructive testing scenarios. Finally, the performance of each algorithm is rated on reconstruction quality and algorithmic complexity. The presented experimental approach is based on repeated spatially structured heating by a high power laser. As a result, a two-dimensional sparse defect/inhomogeneity map can be obtained. In addition, the obtained results are compared with those of conventional thermographic inspection methods which make use of homogeneous illumination. Due to the sparse nature of the reconstructed defect/inhomogeneity map, this comparison is performed qualitatively.

eess.IV↗

arXiv2021

Photothermal-SR-Net: A Customized Deep Unfolding Neural Network for Photothermal Super Resolution Imaging

This paper presents deep unfolding neural networks to handle inverse problems in photothermal radiometry enabling super resolution (SR) imaging. Photothermal imaging is a well-known technique in active thermography for nondestructive inspection of defects in materials such as metals or composites. A grand challenge of active thermography is to overcome the spatial resolution limitation imposed by heat diffusion in order to accurately resolve each defect. The photothermal SR approach enables to extract high-frequency spatial components based on the deconvolution with the thermal point spread function. However, stable deconvolution can only be achieved by using the sparse structure of defect patterns, which often requires tedious, hand-crafted tuning of hyperparameters and results in computationally intensive algorithms. On this account, Photothermal-SR-Net is proposed in this paper, which performs deconvolution by deep unfolding considering the underlying physics. This enables to super resolve 2D thermal images for nondestructive testing with a substantially improved convergence rate. Since defects appear sparsely in materials, Photothermal-SR-Net applies trained block-sparsity thresholding to the acquired thermal images in each convolutional layer. The performance of the proposed approach is evaluated and discussed using various deep unfolding and thresholding approaches applied to 2D thermal images. Subsequently, studies are conducted on how to increase the reconstruction quality and the computational performance of Photothermal-SR-Net is evaluated. Thereby, it was found that the computing time for creating high-resolution images could be significantly reduced without decreasing the reconstruction quality by using pixel binning as a preprocessing step.

cs.CV↗

arXiv2020

Learned Block Iterative Shrinkage Thresholding Algorithm for Photothermal Super Resolution Imaging

Block-sparse regularization is already well-known in active thermal imaging and is used for multiple measurement based inverse problems. The main bottleneck of this method is the choice of regularization parameters which differs for each experiment. To avoid time-consuming manually selected regularization parameter, we propose a learned block-sparse optimization approach using an iterative algorithm unfolded into a deep neural network. More precisely, we show the benefits of using a learned block iterative shrinkage thresholding algorithm that is able to learn the choice of regularization parameters. In addition, this algorithm enables the determination of a suitable weight matrix to solve the underlying inverse problem. Therefore, in this paper we present the algorithm and compare it with state of the art block iterative shrinkage thresholding using synthetically generated test data and experimental test data from active thermography for defect reconstruction. Our results show that the use of the learned block-sparse optimization approach provides smaller normalized mean square errors for a small fixed number of iterations than without learning. Thus, this new approach allows to improve the convergence speed and only needs a few iterations to generate accurate defect reconstruction in photothermal super resolution imaging.

cs.CV↗

arXiv2020

Classification of Spot-welded Joints in Laser Thermography Data using Convolutional Neural Networks

Spot welding is a crucial process step in various industries. However, classification of spot welding quality is still a tedious process due to the complexity and sensitivity of the test material, which drain conventional approaches to its limits. In this paper, we propose an approach for quality inspection of spot weldings using images from laser thermography data.We propose data preparation approaches based on the underlying physics of spot welded joints, heated with pulsed laser thermography by analyzing the intensity over time and derive dedicated data filters to generate training datasets. Subsequently, we utilize convolutional neural networks to classify weld quality and compare the performance of different models against each other. We achieve competitive results in terms of classifying the different welding quality classes compared to traditional approaches, reaching an accuracy of more than 95 percent. Finally, we explore the effect of different augmentation methods.

cs.CV↗

arXiv2020

Laser excited super resolution thermal imaging for nondestructive inspection of internal defects

A photothermal super resolution technique is proposed for an improved inspection of internal defects. To evaluate the potential of the laser-based thermographic technique, an additively manufactured stainless steel specimen with closely spaced internal cavities is used. Four different experimental configurations in transmission, reflection, stepwise and continuous scanning are investigated. The applied image post-processing method is based on compressed sensing and makes use of the block sparsity from multiple measurement events. This concerted approach of experimental measurement strategy and numerical optimization enables the resolution of internal defects and outperforms conventional thermographic inspection techniques.

physics.app-ph↗