arXiv subjects

Mate Boban

Publications and source records attributed to Mate Boban.

24 records · Page 2Linked to original sources

arXiv2016

Exploring the Practical Limits of Cooperative Awareness in Vehicular Communications

We perform an extensive study of cooperative awareness in vehicular communication based on periodic message exchange. We start by analyzing measurements collected on four test sites across Europe. To measure cooperative awareness, we use three metrics: 1) neighborhood awareness ratio; 2) ratio of neighbors above range; and 3) packet delivery rate. Using the collected data, we define a simple model for calculating neighborhood awareness given packet delivery ratio for a given environment. Finally, we perform realistic, large-scale simulations to explore the achievable performance of cooperative awareness under realistic transmit power and transmit rate constraints. Our measurements and simulation results show that: i) above a certain threshold, there is little benefit in increasing cooperative message rate to improve the awareness; higher transmit power and fewer messages transmissions are a better approach, since message delivery is dominated by shadowing. ii) the efficacy of cooperative awareness varies greatly in different environments on both large scale (e.g., 90\% awareness is achievable up to 200~m in urban and over 500~m in highway) and small scale (e.g., vehicles in nearby streets can have significantly different awareness); iii) V2V and V2I communication have distinct awareness patterns; iv) each location has a distinct transmit power that achieves high awareness; and v) achieving high awareness levels results in increased reception of potentially unwanted messages; therefore, a balance needs to be found between awareness and interference, depending on the specific context. We hope our results will serve as a starting point for designing more effective periodic message exchange services for cooperative awareness.

cs.NI↗

arXiv2015

Scooter-to-X Communications: Antenna Placement, Human Body Shadowing, and Channel Modeling

In countries such as Taiwan, with a high percentage of scooters, scooter-related accidents are responsible for most injuries and deaths of all traffic accidents. One viable approach to reduce the number of accidents is to utilize short-range wireless communications between the scooter and other vehicles. This would help neighboring vehicles to detect the scooter and vice-versa, thus reducing the probability of a collision. In this paper, we perform extensive measurements to characterize communication links between a scooter and other vehicles. Our results suggest that, when the line-of-sight propagation path is blocked by the body of the scooter driver (and possibly also a passenger), shadowing of the human body results in significant signal attenuation, ranging from 9 to 18 dB on average, presenting challenging channel characteristics unique to scooters. In addition, we perform simulations, which show that it is imperative to incorporate the body shadowing effect to obtain realistic simulation results. We also develop a model to determine whether human body shadowing is in effect, given the relative positions of the transmitter and the receiver.

cs.NI↗

arXiv2015

Vehicular Communications: Survey and Challenges of Channel and Propagation Models

Vehicular communication is characterized by a dynamic environment, high mobility, and comparatively low antenna heights on the communicating entities (vehicles and roadside units). These characteristics make vehicular propagation and channel modeling particularly challenging. In this article, we classify and describe the most relevant vehicular propagation and channel models, with a particular focus on the usability of the models for the evaluation of protocols and applications. We first classify the models based on the propagation mechanisms they employ and their implementation approach. We also classify the models based on the channel properties they implement and pay special attention to the usability of the models, including the complexity of implementation, scalability, and the input requirements (e.g., geographical data input). We also discuss the less-explored aspects in vehicular channel modeling, including modeling specific environments (e.g., tunnels, overpasses, and parking lots) and types of communicating vehicles (e.g., scooters and public transportation vehicles). We conclude by identifying the underresearched aspects of vehicular propagation and channel modeling that require further modeling and measurement studies.

cs.NI↗

arXiv2014

Realistic and Efficient Channel Modeling for Vehicular Networks

To date, VANET research efforts have relied heavily on simulations, due to prohibitive costs of deploying real world testbeds. Existing channel models implemented in discrete-event VANET simulators are by and large simple stochastic radio models, based on the statistical properties of the chosen environment. It was shown that such models are unable to provide satisfactory accuracy for typical VANET scenarios. We performed extensive measurements in different environments (open space, highway, suburban, urban, parking lot) to characterize in detail the impact that vehicles have on communication in terms of received power, packet delivery rate, and effective communication range. Since the impact of vehicles was found to be significant, we developed a model that accounts for vehicles as three-dimensional obstacles and takes into account their impact on the line of sight obstruction, received signal power, packet reception rate, and message reachability. The model is based on the empirically derived vehicle dimensions, accurate vehicle positioning, and realistic mobility patterns. We validate the model against extensive measurements. To enable realistic modeling in urban and suburban environments, we developed a model that incorporates static objects as well. The model requires minimum geographic information: the location and the dimensions of modeled objects (vehicles, buildings, and foliage). We validate the model against measurements and show that it successfully captures both small-scale and large-scale propagation effects in different environments (highway, urban, suburban, open space).

cs.NI↗

arXiv2014

Geometry-Based Vehicle-to-Vehicle Channel Modeling for Large-Scale Simulation

Due to the dynamic nature of vehicular traffic and the road surroundings, vehicle-to-vehicle (V2V) propagation characteristics vary greatly on both small- and large-scale. Recent measurements have shown that both large static objects (e.g., buildings and foliage) as well as mobile objects (surrounding vehicles) have a profound impact on V2V communication. At the same time, system-level Vehicular Ad Hoc Network (VANET) simulators by and large employ simple statistical propagation models, which do not account for surrounding objects explicitly. We designed GEMV$^2$ (Geometry-based Efficient propagation Model for V2V communication), which uses outlines of vehicles, buildings, and foliage to distinguish the following three types of links: line of sight (LOS), non-LOS due to vehicles, and non- LOS due to static objects. For each link, GEMV$^2$ calculates the large-scale signal variations deterministically, whereas the small- scale signal variations are calculated stochastically based on the number and size of surrounding objects. We implement GEMV$^2$ in MATLAB and show that it scales well by using it to simulate radio propagation for city-wide networks with tens of thousands of vehicles on commodity hardware. We make the source code of GEMV$^2$ freely available. Finally, we validate GEMV$^2$ against extensive measurements performed in urban, suburban, highway, and open space environment.

cs.NI↗

arXiv2013

TVR - Tall Vehicle Relaying in Vehicular Networks

Vehicle-to-Vehicle (V2V) communication is a core technology for enabling safety and non-safety applications in next generation Intelligent Transportation Systems. Due to relatively low heights of the antennas, V2V communication is often influenced by topographic features, man-made structures, and other vehicles located between the communicating vehicles. On highways, it was shown experimentally that vehicles can obstruct the line of sight (LOS) communication up to 50 percent of the time; furthermore, a single obstructing vehicle can reduce the power at the receiver by more than 20 dB. Based on both experimental measurements and simulations performed using a validated channel model, we show that the elevated position of antennas on tall vehicles improves communication performance. Tall vehicles can significantly increase the effective communication range, with an improvement of up to 50 percent in certain scenarios. Using these findings, we propose a new V2V relaying scheme called Tall Vehicle Relaying (TVR) that takes advantage of better channel characteristics provided by tall vehicles. TVR distinguishes between tall and short vehicles and, where appropriate, chooses tall vehicles as next hop relays. We investigate TVR's system-level performance through a combination of link-level experiments and system-level simulations and show that it outperforms existing techniques.

cs.NI↗