arXiv subjects

Matěj Boxan

Publications and source records attributed to Matěj Boxan.

11 recordsLinked to original sources

arXiv2026

One year in a forest: Analyzing the challenges of autonomous navigation in subarctic environments

Subarctic regions have the potential to see increased deployment of autonomous robots in applications including forestry, mining, and environmental monitoring. In these conditions, an autonomous system's reliance on GNSS or cloud computing is precarious due to dense tree canopies and atmospheric attenuation, necessitating onboard sensing and data processing. However, established exteroceptive modalities, including cameras, lidars, and radars, are typically evaluated in structured urban settings or in environments that lack significant seasonal variations. To address this, we present a field report on a year-long deployment of a mobile robot in a subarctic boreal forest. We evaluate 64 km of data using nine odometry, localization, and mapping methods and assess their performance across seasonal changes. The performed experiments suggest that the environment changes significantly hinder the performance of state-of-the-art techniques, which show increased fragility when subject to conditions characterized by self-similar scenes or tall snowbanks. Additionally, complex Simultaneous Localization and Mapping (SLAM) algorithms offer limited accuracy gains over a proprioceptive baseline while significantly increasing system fragility. Furthermore, by correlating the position drift with features and confidence weight distribution, we show that visual-based SLAM methods are particularly affected by the seasonal changes. Additionally, we investigate the task of cross-season localization in a prior map. While lidar-based methods successfully completed localization runs between seasons, radar and visual methods are prone to failure due to a few matching features between runs, even within the same season. Finally, we detail the challenges and lessons learned from this year-long trial, including a multi-season Teach and Repeat (T&R) evaluation using both radar and lidar-based pipelines.

cs.RO↗

arXiv2026

Leveraging Image Generators to Address Data Scarcity: The Gen4Regen Dataset for Forest Regeneration Mapping

Sustainable forest management relies on precise species composition mapping, yet traditional ground surveys are labour-intensive and geographically constrained. While Uncrewed Aerial Vehicles (UAVs) offer scalable data collection, the transition to deep learning-based interpretation is bottlenecked by the severe scarcity of expert-annotated imagery, particularly in complex, visually heterogeneous regeneration zones. This paper addresses the dual challenges of data scarcity and extreme class imbalance in the fine-grained semantic segmentation of plants by providing a scalable framework that reduces reliance on manual photo-interpretation for high-resolution, millimetre-level aerial imagery. Importantly, we leverage the large-scale Nano Banana Pro model to simultaneously generate high-fidelity images and their corresponding pixel-aligned semantic masks from prompts. We introduce WilDReF-Q-V2, an expansion of a natural forest dataset with 13 977 new unlabelled and 50 hand-labelled real images, as well as the Gen4Regen dataset, featuring 2101 pairs of synthetic images and semantic masks. Our methodology integrates real-world data with AI-generated images, highlighting that AI-generated data is highly complementary to real-world data, with unified training yielding an F1 score improvement of over 15 %pt compared to purely supervised baselines. Furthermore, we demonstrate that even small quantities of prompt-generated data significantly improve performance for underrepresented classes, some of which see per-class F1 score gains of over 30 %pt. We conclude that large-scale vision models can serve as agile data generators, effectively bootstrapping perception tasks for niche AI domains where expert labels are scarce or unavailable. Our datasets, source code, and models will be available at https://norlab-ulaval.github.io/gen4regen.

cs.CV↗

arXiv2026

Radar Odometry Subject to High Tilt Dynamics of Subarctic Environments

Rotating FMCW radar odometry methods often assume flat ground conditions. While this assumption is sufficient in many scenarios, including urban environments or flat mining setups, the highly dynamic terrain of subarctic environments poses a challenge to standard feature extraction and state estimation techniques. This paper benchmarks three existing radar odometry methods under demanding conditions, exhibiting up to 13{\deg} in pitch and 4{\deg} in roll difference between consecutive scans, with absolute pitch and roll reaching 30{\deg} and 8{\deg}, respectively. Furthermore, we propose a novel radar-inertial odometry method utilizing tilt-proximity submap search and a hard threshold for vertical displacement between scan points and the estimated axis of rotation. Experimental results demonstrate a state-of-the-art performance of our method on an urban baseline and a 0.3% improvement over the second-best comparative method on a 2-kilometer-long dynamic trajectory. Finally, we analyze the performance of the four evaluated methods on a complex radar sequence characterized by high lateral slip and a steep ditch traversal.

cs.RO↗

arXiv2026

FoMo: A Multi-Season Dataset for Robot Navigation in For\^et Montmorency

The For\^et Montmorency (FoMo) dataset is a comprehensive multi-season data collection, recorded over the span of one year in a boreal forest. Featuring a unique combination of on- and off-pavement environments with significant environmental changes, the dataset challenges established odometry and SLAM pipelines. Some highlights of the data include the accumulation of snow exceeding 1 m, significant vegetation growth in front of sensors, and operations at the traction limits of the platform. In total, the FoMo dataset includes over 64 km of six diverse trajectories, repeated during 12 deployments throughout the year. The dataset features data from one rotating and one hybrid solid-state lidar, a Frequency Modulated Continuous Wave (FMCW) radar, full-HD images from a stereo camera and a wide lens monocular camera, as well as data from two IMUs. Ground Truth is calculated by post-processing three GNSS receivers mounted on the Uncrewed Ground Vehicle (UGV) and a static GNSS base station. Additional metadata, such as one measurement per minute from an on-site weather station, camera calibration intrinsics, and vehicle power consumption, is available for all sequences. To highlight the relevance of the dataset, we performed a preliminary evaluation of the robustness of a lidar-inertial, radar-gyro, and a visual-inertial localization and mapping techniques to seasonal changes. We show that seasonal changes have serious effects on the re-localization capabilities of the state-of-the-art methods. The dataset and development kit are available at https://fomo.norlab.ulaval.ca.

cs.RO↗

arXiv2025

Reproducible Evaluation of Camera Auto-Exposure Methods in the Field: Platform, Benchmark and Lessons Learned

Standard datasets often present limitations, particularly due to the fixed nature of input data sensors, which makes it difficult to compare methods that actively adjust sensor parameters to suit environmental conditions. This is the case with Automatic-Exposure (AE) methods, which rely on environmental factors to influence the image acquisition process. As a result, AE methods have traditionally been benchmarked in an online manner, rendering experiments non-reproducible. Building on our prior work, we propose a methodology that utilizes an emulator capable of generating images at any exposure time. This approach leverages BorealHDR, a unique multi-exposure stereo dataset, along with its new extension, in which data was acquired along a repeated trajectory at different times of the day to assess the impact of changing illumination. In total, BorealHDR covers 13.4 km over 59 trajectories in challenging lighting conditions. The dataset also includes lidar-inertial-odometry-based maps with pose estimation for each image frame, as well as Global Navigation Satellite System (GNSS) data for comparison. We demonstrate that by using images acquired at various exposure times, we can emulate realistic images with a Root-Mean-Square Error (RMSE) below 1.78% compared to ground truth images. Using this offline approach, we benchmarked eight AE methods, concluding that the classical AE method remains the field's best performer. To further support reproducibility, we provide in-depth details on the development of our backpack acquisition platform, including hardware, electrical components, and performance specifications. Additionally, we share valuable lessons learned from deploying the backpack over more than 25 km across various environments. Our code and dataset are available online at this link: https://github.com/norlab-ulaval/TFR24 BorealHDR

cs.RO↗

arXiv2025

Toward Teach and Repeat Across Seasonal Deep Snow Accumulation

Teach and repeat is a rapid way to achieve autonomy in challenging terrain and off-road environments. A human operator pilots the vehicles to create a network of paths that are mapped and associated with odometry. Immediately after teaching, the system can drive autonomously within its tracks. This precision lets operators remain confident that the robot will follow a traversable route. However, this operational paradigm has rarely been explored in off-road environments that change significantly through seasonal variation. This paper presents preliminary field trials using lidar and radar implementations of teach and repeat. Using a subset of the data from the upcoming FoMo dataset, we attempted to repeat routes that were 4 days, 44 days, and 113 days old. Lidar teach and repeat demonstrated a stronger ability to localize when the ground points were removed. FMCW radar was often able to localize on older maps, but only with small deviations from the taught path. Additionally, we highlight specific cases where radar localization failed with recent maps due to the high pitch or roll of the vehicle. We highlight lessons learned during the field deployment and highlight areas to improve to achieve reliable teach and repeat with seasonal changes in the environment. Please follow the dataset at https://norlab-ulaval.github.io/FoMo-website for updates and information on the data release.

cs.RO↗

arXiv2024

Field Report on a Wearable and Versatile Solution for Field Acquisition and Exploration

This report presents a wearable plug-and-play platform for data acquisition in the field. The platform, extending a waterproof Pelican Case into a 20 kg backpack offers 5.5 hours of power autonomy, while recording data with two cameras, a lidar, an Inertial Measurement Unit (IMU), and a Global Navigation Satellite System (GNSS) receiver. The system only requires a single operator and is readily controlled with a built-in screen and buttons. Due to its small footprint, it offers greater flexibility than large vehicles typically deployed in off-trail environments. We describe the platform's design, detailing the mechanical parts, electrical components, and software stack. We explain the system's limitations, drawing from its extensive deployment spanning over 20 kilometers of trajectories across various seasons, environments, and weather conditions. We derive valuable lessons learned from these deployments and present several possible applications for the system. The possible use cases consider not only academic research but also insights from consultations with our industrial partners. The mechanical design including all CAD files, as well as the software stack, are publicly available at https://github.com/norlab-ulaval/backpack_workspace.

cs.RO↗

arXiv2024

3D Mapping of Glacier Moulins: Challenges and lessons learned

In this paper, we present a field report of the mapping of the Athabasca Glacier, using a custom-made lidar-inertial mapping platform. With the increasing autonomy of robotics, a wider spectrum of applications emerges. Among these, the surveying of environmental areas presents arduous and hazardous challenges for human operators. Leveraging automated platforms for data collection holds the promise of unlocking new applications and a deeper comprehension of the environment. Over the course of a week-long deployment, we collected glacier data using a tailor-made measurement platform and reflected on the inherent challenges associated with such experiments. We focus on the insights gained and the forthcoming challenges that robotics must surmount to effectively map these terrains.

cs.RO↗

arXiv2024

FoMo: A Proposal for a Multi-Season Dataset for Robot Navigation in For\^et Montmorency

In this paper, we propose the FoMo (For\^et Montmorency) dataset: a comprehensive, multi-season data collection. Located in the Montmorency Forest, Quebec, Canada, our dataset will capture a rich variety of sensory data over six distinct trajectories totaling 6 kilometers, repeated through different seasons to accumulate 42 kilometers of recorded data. The boreal forest environment increases the diversity of datasets for mobile robot navigation. This proposed dataset will feature a broad array of sensor modalities, including lidar, radar, and a navigation-grade Inertial Measurement Unit (IMU), against the backdrop of challenging boreal forest conditions. Notably, the FoMo dataset will be distinguished by its inclusion of seasonal variations, such as changes in tree canopy and snow depth up to 2 meters, presenting new challenges for robot navigation algorithms. Alongside, we will offer a centimeter-level accurate ground truth, obtained through Post Processed Kinematic (PPK) Global Navigation Satellite System (GNSS) correction, facilitating precise evaluation of odometry and localization algorithms. This work aims to spur advancements in autonomous navigation, enabling the development of robust algorithms capable of handling the dynamic, unstructured environments characteristic of boreal forests. With a public odometry and localization leaderboard and a dedicated software suite, we invite the robotics community to engage with the FoMo dataset by exploring new frontiers in robot navigation under extreme environmental variations. We seek feedback from the community based on this proposal to make the dataset as useful as possible. For further details and supplementary materials, please visit https://norlab-ulaval.github.io/FoMo-website/.

cs.RO↗

arXiv2023

Saturation-Aware Angular Velocity Estimation: Extending the Robustness of SLAM to Aggressive Motions

We propose a novel angular velocity estimation method to increase the robustness of Simultaneous Localization And Mapping (SLAM) algorithms against gyroscope saturations induced by aggressive motions. Field robotics expose robots to various hazards, including steep terrains, landslides, and staircases, where substantial accelerations and angular velocities can occur if the robot loses stability and tumbles. These extreme motions can saturate sensor measurements, especially gyroscopes, which are the first sensors to become inoperative. While the structural integrity of the robot is at risk, the robustness of the SLAM framework is oftentimes given little consideration. Consequently, even if the robot is physically capable of continuing the mission, its operation will be compromised due to a corrupted representation of the world. Regarding this problem, we propose a method to estimate the angular velocity using accelerometers during extreme rotations caused by tumbling. We show that our method reduces the median localization error by 71.5 % in translation and 65.5 % in rotation and is robust to mapping failures, which occurred in 37.5 % of the experiments without our method. We also propose the Tumbling-Induced Gyroscope Saturation (TIGS) dataset, which consists of outdoor experiments recording the motion of a mechanical lidar subject to angular velocities four times higher than other similar datasets available. The dataset is available online at https://github.com/norlab-ulaval/Norlab_wiki/wiki/TIGS-Dataset.

cs.RO↗

arXiv2023

Exposing the Unseen: Exposure Time Emulation for Offline Benchmarking of Vision Algorithms

Visual Odometry (VO) is one of the fundamental tasks in computer vision for robotics. However, its performance is deeply affected by High Dynamic Range (HDR) scenes, omnipresent outdoor. While new Automatic-Exposure (AE) approaches to mitigate this have appeared, their comparison in a reproducible manner is problematic. This stems from the fact that the behavior of AE depends on the environment, and it affects the image acquisition process. Consequently, AE has traditionally only been benchmarked in an online manner, making the experiments non-reproducible. To solve this, we propose a new methodology based on an emulator that can generate images at any exposure time. It leverages BorealHDR, a unique multi-exposure stereo dataset collected over 10 km, on 55 trajectories with challenging illumination conditions. Moreover, it includes lidar-inertial-based global maps with pose estimation for each image frame as well as Global Navigation Satellite System (GNSS) data, for comparison. We show that using these images acquired at different exposure times, we can emulate realistic images, keeping a Root-Mean-Square Error (RMSE) below 1.78 % compared to ground truth images. To demonstrate the practicality of our approach for offline benchmarking, we compared three state-of-the-art AE algorithms on key elements of Visual Simultaneous Localization And Mapping (VSLAM) pipeline, against four baselines. Consequently, reproducible evaluation of AE is now possible, speeding up the development of future approaches. Our code and dataset are available online at this link: https://github.com/norlab-ulaval/BorealHDR

cs.RO↗