arXiv subjects

Masato Okada

Publications and source records attributed to Masato Okada.

At least 19 recordsLinked to original sources

arXiv2026

Computed Tomography Reconstruction Algorithm Using Markov Random Field Model

X-ray computed tomography (CT) reveals the materials' internal structures non-destructively from a tilt series of projected images. Filtered back projection (FBP) is a widely-adopted reconstruction algorithm in CT owing to its small computational cost. Under low-dose or sparse-view conditions, however, FBP often amplifies noise, severely degrading the reconstructed images. In this study, we evaluated the performance of a Bayesian CT reconstruction algorithm based on the Markov random field model under such adverse conditions. Through simulations, we demonstrated that the proposed algorithm shows higher reconstruction performance than FBP under both low-dose and sparse-view conditions. The hyperparameters are estimated by minimizing the Bayesian free energy, enabling adaptive reconstruction that reflects the noise characteristics of the observed projection data. These results suggest that the proposed algorithm can broaden the applicability of CT to dose-sensitive applications and time-constrained measurements, where only limited observed projection data are available.

physics.med-ph↗

arXiv2026

Uncertainty-Aware Sparse Identification of Dynamical Systems via Bayesian Model Averaging

In many problems of data-driven modeling for dynamical systems, the governing equations are not known a priori and must be selected phenomenologically from a large set of candidate interactions and basis functions. In such situations, point estimates alone can be misleading, because multiple model components may explain the observed data comparably well, especially when the data are limited or the dynamics exhibit poor identifiability. Quantifying the uncertainty associated with model selection is therefore essential for constructing reliable dynamical models from data. In this work, we develop a Bayesian sparse identification framework for dynamical systems with coupled components, aimed at inferring both interaction structure and functional form together with principled uncertainty quantification. The proposed method combines sparse modeling with Bayesian model averaging, yielding posterior inclusion probabilities that quantify the credibility of each candidate interaction and basis component. Through numerical experiments on oscillator networks, we show that the framework accurately recovers sparse interaction structures with quantified uncertainty, including higher-order harmonic components, phase-lag effects, and multi-body interactions. We also demonstrate that, even in a phenomenological setting where the true governing equations are not contained in the assumed model class, the method can identify effective functional components with quantified uncertainty. These results highlight the importance of Bayesian uncertainty quantification in data-driven discovery of dynamical models.

stat.AP↗

arXiv2026

GPU-Accelerated Sequential Monte Carlo for Bayesian Spectral Analysis

Bayesian spectral deconvolution provides a data-driven framework for mathematical model selection and parameter estimation from spectral data. Although highly versatile, it becomes computationally expensive as the number of model parameters, data points, and candidate models increases, often rendering practical applications infeasible. We propose a GPU-accelerated approach in which a sequential Monte Carlo sampler (SMCS) is run in parallel on a GPU to perform Bayesian model selection of the number of spectral peaks and Bayesian estimation of peak-function parameters. Numerical experiments demonstrate that the GPU-parallelized SMCS achieves speedups exceeding 500x over CPU-parallelized replica exchange Monte Carlo (REMC). The method is validated on artificial data designed to emulate X-ray photoelectron spectroscopy (XPS) and X-ray diffraction (XRD) measurements, as well as on real experimental spectra. As measurement techniques such as microscopic spectroscopy and in-situ methods continue to drive rapid growth in the volume of spectral data, the proposed approach offers a practical computational foundation for advanced analysis of individual datasets.

stat.CO↗

arXiv2026

Automatic Termination Strategy of Inelastic Neutron-scattering Measurement Using Bayesian Optimization for Bin-width Selection

Currently, an excessive amount of event data is being obtained in four-dimensional inelastic neutron-scattering experiments. A method for automatic bin-width optimization of multidimensional histograms has been developed and recently validated on real inelastic neutron-scattering data. However, measuring beyond the equipment resolution leads to inefficient use of valuable beam time. To improve experimental efficiency, an automatic termination strategy is essential. We propose a Bayesian-optimization-based method to compute a stopping criterion that can support online decisions on whether to continue or terminate an experiment. In the proposed method, the bin-width optimization is performed using Bayesian optimization to efficiently compute the optimal bin widths. The experiment is terminated when the optimal bin widths become smaller than the target resolutions. In numerical experiments using real inelastic neutron-scattering data, the optimal bin widths decrease as the number of events increases. Even the optimal bin widths for data downsampled to 1/5 are comparable with the resolutions limited by the sample size, choppers, and so on. This implies excessive measurement of the inelastic neutron experiments for the moment. Moreover, we found that Bayesian optimization can reduce the search cost to approximately 10% of an exhaustive search in our numerical experiments.

physics.data-an↗

arXiv2025

A Message-Passing Perspective on Ptychographic Phase Retrieval

We introduce a probabilistic approach to ptychographic reconstruction in computational imaging. Ptychography is an imaging method where the complex amplitude of an object is estimated from a sequence of diffraction measurements. We formulate this reconstruction as a Bayesian inverse problem and derive an inference algorithm, termed "Ptycho-EP," based on belief propagation and Vector Approximate Message Passing from information theory. Prior knowledge about the unknown object can be integrated into the probabilistic model, and the Bayesian framework inherently provides uncertainty quantification of the reconstruction. Numerical experiments demonstrate that, when the probe's illumination function is known, our algorithm accurately retrieves the object image at a sampling ratio approaching the information theoretic limit. In scenarios where the illumination function is unknown, both the object and the probe can be jointly reconstructed via an Expectation-Maximization algorithm. We evaluate the performance of our algorithm against conventional methods, highlighting its superior convergence speed.

stat.AP↗

arXiv2025

Sequential Exchange Monte Carlo: A Sampling Method for Bayesian Data Analysis without Parameter Tuning

Bayesian data analysis is widely used across many disciplines, and representative examples in materials science include spectral analysis and sparse modeling. In such applications, the underlying models often become complex and yield multimodal posterior distributions, making efficient sampling from multimodal distributions essential. Replica exchange Monte Carlo has been commonly employed for this purpose; however, its performance strongly depends on difficult parameter tuning, such as the design of the inverse temperature. In this study, we comparatively investigate sampling algorithms that require fewer tuning parameters for Bayesian data analysis in materials science. Specifically, we compare three approaches: non-reversible parallel tempering (NRPT), sequential Monte Carlo samplers (SMCS), and a newly proposed method, sequential exchange Monte Carlo (SEMC). Our results indicate that NRPT can require computational time for parameter tuning, while SMCS requires careful adjustment of the number of MCMC steps at each temperature level. In contrast, SEMC achieves robust convergence across a range of problem settings without additional tuning, demonstrating its practicality for Bayesian inference.

cs.IT↗

arXiv2025

Bayesian estimation of coupling strength and heterogeneity in a coupled oscillator model from macroscopic quantities

Various macroscopic oscillations, such as the heartbeat and the flashing of fireflies, are created by synchronizing oscillatory units (oscillators). To elucidate the mechanism of synchronization, several coupled oscillator models have been devised and extensively analyzed. Although parameter estimation of these models has also been actively investigated, most of the proposed methods are based on the data from individual oscillators, not from macroscopic quantities. In the present study, we propose a Bayesian framework to estimate the model parameters of coupled oscillator models, using the time series data of the Kuramoto order parameter as the only given data. We adopt the exchange Monte Carlo method for the efficient estimation of the posterior distribution and marginal likelihood. Numerical experiments are performed to confirm the validity of our method and examine the dependence of the estimation error on the observational noise and system size.

physics.data-an↗

arXiv2024

Stochastic Vector Approximate Message Passing with applications to phase retrieval

Phase retrieval refers to the problem of recovering a high-dimensional vector $\boldsymbol{x} \in \mathbb{C}^N$ from the magnitude of its linear transform $\boldsymbol{z} = A \boldsymbol{x}$, observed through a noisy channel. To improve the ill-posed nature of the inverse problem, it is a common practice to observe the magnitude of linear measurements $\boldsymbol{z}^{(1)} = A^{(1)} \boldsymbol{x},..., \boldsymbol{z}^{(L)} = A^{(L)}\boldsymbol{x}$ using multiple sensing matrices $A^{(1)},..., A^{(L)}$, with ptychographic imaging being a remarkable example of such strategies. Inspired by existing algorithms for ptychographic reconstruction, we introduce stochasticity to Vector Approximate Message Passing (VAMP), a computationally efficient algorithm applicable to a wide range of Bayesian inverse problems. By testing our approach in the setup of phase retrieval, we show the superior convergence speed of the proposed algorithm.

stat.CO↗

arXiv2024

Highly Versatile FPGA-Implemented Cyber Coherent Ising Machine

In recent years, quantum Ising machines have drawn a lot of attention, but due to physical implementation constraints, it has been difficult to achieve dense coupling, such as full coupling with sufficient spins to handle practical large-scale applications. Consequently, classically computable equations have been derived from quantum master equations for these quantum Ising machines. Parallel implementations of these algorithms using FPGAs have been used to rapidly find solutions to these problems on a scale that is difficult to achieve in physical systems. We have developed an FPGA implemented cyber coherent Ising machine (cyber CIM) that is much more versatile than previous implementations using FPGAs. Our architecture is versatile since it can be applied to the open-loop CIM, which was proposed when CIM research began, to the closed-loop CIM, which has been used recently, as well as to Jacobi successive over-relaxation method. By modifying the sequence control code for the calculation control module, other algorithms such as Simulated Bifurcation (SB) can also be implemented. Earlier research on large-scale FPGA implementations of SB and CIM used binary or ternary discrete values for connections, whereas the cyber CIM used FP32 values. Also, the cyber CIM utilized Zeeman terms that were represented as FP32, which were not present in other large-scale FPGA systems. Our implementation with continuous interaction realizes N=4096 on a single FPGA, comparable to the single-FPGA implementation of SB with binary interactions, with N=4096. The cyber CIM enables applications such as CDMA multi-user detector and L0 compressed sensing which were not possible with earlier FPGA systems, while enabling superior calculation speeds, more than ten times faster than a GPU implementation. The calculation speed can be further improved by increasing parallelism, such as through clustering.

cs.AR↗

arXiv2024

Mesoscopic Bayesian Inference by Solvable Models

The rapid advancement of data science and artificial intelligence has affected physics in numerous ways, including the application of Bayesian inference, setting the stage for a revolution in research methodology. Our group has proposed Bayesian measurement, a framework that applies Bayesian inference to measurement science with broad applicability across various natural sciences. This framework enables the determination of posterior probability distributions of system parameters, model selection, and the integration of multiple measurement datasets. However, applying Bayesian measurement to real data analysis requires a more sophisticated approach than traditional statistical methods like Akaike information criterion (AIC) and Bayesian information criterion (BIC), which are designed for an infinite number of measurements $N$. Therefore, in this paper, we propose an analytical theory that explicitly addresses the case where $N$ is finite in the linear regression model. We introduce $O(1)$ mesoscopic variables for $N$ observation noises. Using this mesoscopic theory, we analyze the three core principles of Bayesian measurement: parameter estimation, model selection, and measurement integration. Furthermore, by introducing these mesoscopic variables, we demonstrate that the difference in free energies, critical for both model selection and measurement integration, can be analytically reduced by two mesoscopic variables of $N$ observation noises. This provides a deeper qualitative understanding of model selection and measurement integration and further provides deeper insights into actual measurements for nonlinear models. Our framework presents a novel approach to understanding Bayesian measurement results.

physics.data-an↗

arXiv2024

Bayesian Inference for Small-Angle Scattering Data II: Core-Shell Samples

Small-angle scattering (SAS) techniques, which utilize neutrons and X-rays, are employed in various scientific fields, including materials science, biochemistry, and polymer physics. During the analysis of SAS data, model parameters that contain information about the sample are estimated by fitting the observational data to a model of sample. Previous research has demonstrated the effectiveness of Bayesian inference in analyzing SAS data using a sphere model. However, compared with the sphere model, the core-shell model, which represents functional nanoparticles, offers higher application potential and greater analytical value. Therefore, in this study, we propose an analytical method for the more complex and practical core-shell model based on Bayesian inference. Through numerical experiments, we evaluated the performance of this method under different conditions, including measurement times, number of data points, and differences in scattering length density. As a result, we clarify the conditions under which accurate estimations are possible.

physics.app-ph↗

arXiv2024

L0-regularized compressed sensing with Mean-field Coherent Ising Machines

Coherent Ising Machine (CIM) is a network of optical parametric oscillators that solves combinatorial optimization problems by finding the ground state of an Ising Hamiltonian. As a practical application of CIM, Aonishi et al. proposed a quantum-classical hybrid system to solve optimization problems of L0-regularization-based compressed sensing (L0RBCS). Gunathilaka et al. has further enhanced the accuracy of the system. However, the computationally expensive CIM's stochastic differential equations (SDEs) limit the use of digital hardware implementations. As an alternative to Gunathilaka et al.'s CIM SDEs used previously, we propose using the mean-field CIM (MF-CIM) model, which is a physics-inspired heuristic solver without quantum noise. MF-CIM surmounts the high computational cost due to the simple nature of the differential equations (DEs). Furthermore, our results indicate that the proposed model has similar performance to physically accurate SDEs in both artificial and magnetic resonance imaging data, paving the way for implementing CIM-based L0RBCS on digital hardware such as Field Programmable Gate Arrays (FPGAs).

cs.ET↗

arXiv2024

Basis Function Dependence of Estimation Precision for Synchrotron-Radiation-Based M\"ossbauer Spectroscopy

M\"ossbauer spectroscopy is a technique employed to investigate the microscopic properties of materials using transitions between energy levels in the nuclei. Conventionally, in synchrotron-radiation-based M\"ossbauer spectroscopy, the measurement window is decided by the researcher heuristically, although this decision has a significant impact on the shape of the measurement spectra. In this paper, we propose a method for evaluating the precision of the spectral position by introducing Bayesian estimation. The proposed method makes it possible to select the best measurement window by calculating the precision of M\"ossbauer spectroscopy from the data. Based on the results, the precision of the M\"ossbauer center shifts improved by more than three times compared with the results achieved with the conventional simple fitting method using the Lorentzian function.

physics.comp-ph↗

arXiv2024

Quantitative Selection of Sample Structures in Small-Angle Scattering Using Bayesian Methods

Small-angle scattering (SAS) is a key experimental technique for analyzing nano-scale structures in various materials.In SAS data analysis, selecting an appropriate mathematical model for the scattering intensity is critical, as it generates a hypothesis of the structure of the experimental sample. Traditional model selection methods either rely on qualitative approaches or are prone to overfitting.This paper introduces an analytical method that applies Bayesian model selection to SAS measurement data, enabling a quantitative evaluation of the validity of mathematical models.We assess the performance of our method through numerical experiments using artificial data for multicomponent spherical materials, demonstrating that our proposed method analysis approach yields highly accurate and interpretable results.We also discuss the ability of our method to analyze a range of mixing ratios and particle size ratios for mixed components, along with its precision in model evaluation by the degree of fitting.Our proposed method effectively facilitates quantitative analysis of nano-scale sample structures in SAS, which has traditionally been challenging, and is expected to significantly contribute to advancements in a wide range of fields.

physics.data-an↗

arXiv2023

Quantifying physical insights cooperatively with exhaustive search for Bayesian spectroscopy of X-ray photoelectron spectra

We analyzed the X-ray photoemission spectra (XPS) of carbon 1s states in graphene and oxygen-intercalated graphene grown on SiC(0001) using Bayesian spectroscopy. To realize highly accurate spectral decomposition of the XPS spectra, we proposed a framework for discovering physical constraints from the absence of prior quantified physical knowledge, in which we designed the prior probabilities based on the found constraints and the physically required conditions. This suppresses the exchange of peak components during replica exchange Monte Carlo iterations and makes possible to decompose XPS in the case where a reliable structure model or a presumable number of components is not known. As a result, we have successfully decomposed XPS of one monolayer (1ML), two monolayers (2ML), and quasi-freestanding 2ML (qfs-2ML) graphene samples deposited on SiC substrates with the meV order precision of the binding energy, in which the posterior probability distributions of the binding energies were obtained distinguishably between the different components of buffer layer even though they are observed as hump and shoulder structures because of their overlapping.

cond-mat.mtrl-sci↗

arXiv2023

Sequential Experimental Design for Spectral Measurement: Active Learning Using a Parametric Model

In this study, we demonstrate a sequential experimental design for spectral measurements by active learning using parametric models as predictors. In spectral measurements, it is necessary to reduce the measurement time because of sample fragility and high energy costs. To improve the efficiency of experiments, sequential experimental designs are proposed, in which the subsequent measurement is designed by active learning using the data obtained before the measurement. Conventionally, parametric models are employed in data analysis; when employed for active learning, they are expected to afford a sequential experimental design that improves the accuracy of data analysis. However, due to the complexity of the formulas, a sequential experimental design using general parametric models has not been realized. Therefore, we applied Bayesian inference-based data analysis using the exchange Monte Carlo method to realize a sequential experimental design with general parametric models. In this study, we evaluated the effectiveness of the proposed method by applying it to Bayesian spectral deconvolution and Bayesian Hamiltonian selection in X-ray photoelectron spectroscopy. Using numerical experiments with artificial data, we demonstrated that the proposed method improves the accuracy of model selection and parameter estimation while reducing the measurement time compared with the results achieved without active learning or with active learning using the Gaussian process regression.

cs.LG↗

arXiv2023

Bayesian Inference for Small-Angle Scattering Data

In this paper, we propose a method for estimating model parameters using Small-Angle Scattering (SAS) data based on the Bayesian inference. Conventional SAS data analyses involve processes of manual parameter adjustment by analysts or optimization using gradient methods. These analysis processes tend to involve heuristic approaches and may lead to local solutions.Furthermore, it is difficult to evaluate the reliability of the results obtained by conventional analysis methods. Our method solves these problems by estimating model parameters as probability distributions from SAS data using the framework of the Bayesian inference. We evaluate the performance of our method through numerical experiments using artificial data of representative measurement target models.From the results of the numerical experiments, we show that our method provides not only high accuracy and reliability of estimation, but also perspectives on the transition point of estimability with respect to the measurement time and the lower bound of the angular domain of the measured data.

stat.ME↗

arXiv2023

Effective implementation of $l_0$-Regularised Compressed Sensing with Chaotic-Amplitude-Controlled Coherent Ising Machines

Coherent Ising Machine (CIM) is a network of optical parametric oscillators that can solve large-scale combinatorial optimisation problems by finding the ground state of an Ising Hamiltonian. As a practical application of CIM, Aonishi et al., proposed a quantum-classical hybrid system to solve optimisation problems of $l_0$-regularisation-based compressed sensing. In the hybrid system, the CIM was an open-loop system without an amplitude control feedback loop. In this case, the hybrid system is enhanced by using a closed-loop CIM to achieve chaotic behaviour around the target amplitude, which would enable escaping from local minima in the energy landscape. Both artificial and magnetic resonance image data were used for the testing of our proposed closed-loop system. Compared with the open-loop system, the results of this study demonstrate an improved degree of accuracy and a wider range of effectiveness.

quant-ph↗