arXiv subjects

Masaaki Ito

Publications and source records attributed to Masaaki Ito.

12 recordsLinked to original sources

arXiv2025

CUNEC: A Path Loss Model for Urban Cell-Free Massive MIMO Networks

Accurate path loss (PL) modeling is essential for evaluating and optimizing cell-free massive MIMO systems, especially in dense urban environments where traditional models fail to capture the complexity of real-world propagation. This paper introduces CUNEC (Cell-free massive MIMO for Urban Non-stationary Environments with Correlations, a novel PL model that accounts for spatial non-stationarity, inter-access point (AP)/user equipment (UE) correlations, and urban-specific propagation phenomena such as corner diffraction and street canyon waveguiding.bCUNEC segments AP-UE paths by street order, models PL as a stochastic function of urban geometry, and integrates spatially correlated shadowing. The parameters are derived from large-scale ray tracing and validated against both additional ray tracing in New York, NY and real-world channel measurements in Los Angeles, CA. Compared to the conventional alpha-beta model, CUNEC significantly improves accuracy in the considered urban propagation scenarios. An open-source dataset comprising over 30,000 AP locations and 128 UE positions is also released to support reproducible research and future system development.

eess.SP↗

arXiv2025

Crystalline water intercalation into the Kitaev honeycomb cobaltate Na$_2$Co$_2$TeO$_6$

We herein report the successful intercalation of water molecules into the layered honeycomb lattice of Na$_2$Co$_2$TeO$_6$, a Kitaev-candidate compound, to obtain the hydrated phase Na$_2$Co$_2$TeO$_6$$\cdot$$y$H$_2$O ($y \sim$ 2.4). Fourier transform infrared spectroscopy, thermogravimetric analysis, differential scanning calorimetry, and Rietveld refinements indicate that crystalline water resides between the cobalt-based honeycomb layers. This insertion of neutral molecules significantly alters the crystal structure, increasing the interlayer spacing and modifying the local bonding environment. Magnetization measurements reveal an antiferromagnetic transition at $T_N \sim 17.2$ K, accompanied by a discernible weak ferromagnetic component. The application of moderate magnetic fields induces a spin-flop reorientation at $\mu_0H \sim 5.7$ T. The $\lambda$-type anomaly and long-range order persist up to 9 T, showing the reconfiguration of the ground state as opposed to its suppression. Heat-capacity analysis reveals the full $2R\ln2$ magnetic entropy expected for two $J_{\rm eff} = 1/2$ moments per formula unit, confirming the pseudospin description. These findings demonstrate that water intercalation is a robust strategy for tuning the magnetic properties of honeycomb lattice materials. Overall, this study highlights neutral-molecule insertion as a promising route toward the discovery and engineering of quantum magnets based on layered transition metal oxides.

cond-mat.str-el↗

arXiv2024

Cell-free massive MIMO Channels in an Urban Environment -- Measurements and Channel Statistics

Cell-free massive MIMO (CF-mMIMO), where each user equipment (UE) is connected to multiple access points (APs), is emerging as an important component for 5G and 6G cellular systems. Accurate channel models based on measurements are required to optimize their design and deployment. This paper presents an extensive measurement campaign for CF-mMIMO in an urban environment. A new "virtual AP" technique measures channels between 80 UE locations and more than 20,000 possible microcellular AP locations. Measurements are done at 3.5 GHz carrier frequency with 350 MHz bandwidth (BW). The paper describes the measurement setup and data processing, shows sample results and their physical interpretation, and provides statistics for key quantities such as pathloss, shadowing, delay spread (DS), and delay window. We find pathloss coefficients of 2.9 and 10.4 for line-of-sight (LOS) and non line-of-sight (NLOS), respectively, where the high LOS coefficient is mainly because larger distance leads to more grazing angle of incidence and thus lower antenna gain in our setup. Shadowing standard deviations are 5.1/16.6 dB, and root mean squared (RMS) DSs of -80.6/-72.6 dBs. The measurements can also be used for parameterizing a CUNEC-type model, which will be reported in future work.

eess.SP↗

arXiv2024

Large-scale Outdoor Cell-free mMIMO Channel Measurement in an Urban Scenario at 3.5 GHz

The design of cell-free massive MIMO (CF-mMIMO) systems requires accurate, measurement-based channel models. This paper provides the first results from the by far most extensive outdoor measurement campaign for CF-mMIMO channels in an urban environment. We measured impulse responses between over 20,000 potential access point (AP) locations and 80 user equipments (UEs) at 3.5 GHz with 350 MHz bandwidth (BW). Measurements use a "virtual array" approach at the AP and a hybrid switched/virtual approach at the UE. This paper describes the sounder design, measurement environment, data processing, and sample results, particularly the evolution of the power-delay profiles (PDPs) as a function of the AP locations, and its relation to the propagation environment.

eess.SP↗

arXiv2021

Energy Efficiency of Uplink Cell-Free Massive MIMO With Transmit Power Control in Measured Propagation Channel

Cell-free massive MIMO (CF-mMIMO) provides wireless connectivity for a large number of user equipments (UEs) using access points (APs) distributed across a wide area with high spectral efficiency (SE). The energy efficiency (EE) of the uplink is determined by (i) the transmit power control (TPC) algorithms, (ii) the numbers, configurations, and locations of the APs and the UEs, and (iii) the propagation channels between the APs and the UEs. This paper investigates all three aspects, based on extensive (~30,000 possible AP locations and 128 possible UE locations) channel measurement data at 3.5 GHz. We compare three different TPC algorithms, namely maximization of transmit power (max-power), maximization of minimum SE (max-min SE), and maximization of minimum EE (max-min EE) while guaranteeing a target SE. We also compare various antenna arrangements including fully-distributed and semi-distributed systems, where APs can be located on a regular grid or randomly, and the UEs can be placed in clusters or far apart. Overall, we show that the max-min EE TPC is highly effective in improving the uplink EE, especially when no UE within a set of served UEs is in a bad channel condition and when the BS antennas are fully-distributed.

cs.IT↗

arXiv2021

Evaluation on Energy Efficiency of UE in UL Cell-Free Massive MIMO System With Power Control Methods

Cell-free massive multiple-input multiple-output (CF mMIMO) systems are expected to provide faster and more robust connections to user equipments (UEs) by cooperation of a massive number of distributed access points, and to be one of the key technologies for beyond 5G (B5G). In B5G, energy efficiency (EE) is one of the most important key indicators because various kinds of devices connect to the network and communicate with each other. While previously proposed transmit power control methods in CF mMIMO systems have aimed to maximize spectral efficiency or total EE, we evaluate in this paper a different approach for maximizing the minimum EE among all UEs. We show that this algorithm can provide the optimum solution in polynomial time, and demonstrate with simulations the improved minimum EE compared to conventional methods.

eess.SP↗

arXiv2021

Uplink Energy Efficiency of Cell-Free Massive MIMO With Transmit Power Control in Measured Propagation Channels

Cell-free massive MIMO (CF-mMIMO) is expected to provide reliable wireless services for a large number of user equipments (UEs) using access points (APs) distributed across a wide area. When the UEs are battery-powered, uplink energy efficiency (EE) becomes an important performance metric for CF-mMIMO systems. Therefore, if the "target" spectral efficiency (SE) is met, it is important to optimize the uplink EE when setting the transmit powers of the UEs. Also, such transmit power control (TPC) method must be tested on channel data from real-world measurements to prove its effectiveness. In this paper, we compare three different TPC algorithms using zero-forcing reception by applying them to 3.5 GHz channel measurement data featuring ~30,000 possible AP locations and 8 UE locations in a 200mx200m area. We show that the max-min EE algorithm is highly effective in improving the uplink EE at a target SE, especially if the number of single-antenna APs is large, circuit power consumption is low, and the maximum allowed transmit power of the UEs is high.

eess.SP↗

arXiv2021

Using a Drone Sounder to Measure Channels for Cell-Free Massive MIMO Systems

Measurements of the propagation channel form the basis of all realistic system performance evaluations, as foundation of statistical channel models or to verify ray tracing. This is also true for the analysis of cell-free massive multi-input multi-output (CF-mMIMO) systems in real-world environments. However, such experimental data are difficult to obtain, due to the complexity and expense of deploying tens or hundreds of channel sounder nodes across the wide area a CF-mMIMO system is expected to cover, especially when different configurations and number of antennas are to be explored. In this paper, we provide a novel method to measure channels for CF-mMIMO systems using a channel sounder based on a drone, also known as a small unmanned aerial vehicle (UAV). Such a method is efficient, flexible, simple, and low-cost, capturing channel data from thousands of different access point (AP) locations within minutes. In addition, we provide sample 3.5 GHz measurement results analyzing deployment strategies for APs and make the data open source, so they may be used for various other studies.

eess.SP↗

arXiv2020

Data Assimilation Method for Experimental and First-Principles Data: Finite-Temperature Magnetization of (Nd,Pr,La,Ce)$_{2}$(Fe,Co,Ni)$_{14}$B

We propose a data-assimilation method for evaluating the finite-temperature magnetization of a permanent magnet over a high-dimensional composition space. Based on a general framework for constructing a predictor from two data sets including missing values, a practical scheme for magnetic materials is formulated in which a small number of experimental data in limited composition space are integrated with a larger number of first-principles calculation data. We apply the scheme to (Nd$_{1-\alpha-\beta-\gamma}$Pr$_{\alpha}$La$_{\beta}$Ce$_{\gamma}$)$_{2}$(Fe$_{1-\delta-\zeta}$Co$_{\delta}$Ni$_{\zeta}$)$_{14}$B. The magnetization in the whole $(\alpha, \beta, \gamma, \delta, \zeta)$ space at arbitrary temperature is obtained. It is shown that the Co doping does not enhance the magnetization at low temperatures, whereas the magnetization increases with increasing $\delta$ above 320 K.

cond-mat.mtrl-sci↗

arXiv2019

Optimal uni-axial ferromagnetism in (La,Ce)$_2$Fe$_{14}$B for permanent magnets

Prospects for light-rare-earth-based permanent magnet compound R$_{2}$Fe$_{14}$B (R=La$_{1-x}$Ce$_{x}$ with $0 \le x\le 1$) are inspected from first principles referring to the latest experimental data. Ce-rich 2:14:1 compounds come with good structure stability, reasonably good combination of magnetization and magnetic anisotropy, while a drawback lies in the low Curie temperature that is only 120~K above the room temperature at the Ce$_2$Fe$_{14}$B limit. Best compromise is inspected on the basis of ab initio data for (La$_{1-x}$Ce$_{x}$)$_2$Fe$_{14}$B referring to the magnetic properties of the champion magnet compound Nd$_{2}$Fe$_{14}$B and prerequisite conditions imposed by practical utility.

cond-mat.mtrl-sci↗

arXiv2017

Towards understanding of magnetization reversal in Nd$-$Fe$-$B nanocomposites: Analysis by high-throughput micromagnetic simulations

We demonstrate how micromagnetic simulations can be employed in order to characterize and analyze the magnetic microstructure of nanocomposites. For the example of nanocrystalline Nd$-$Fe$-$B, which is a potential material for future permanent-magnet applications, we have compared three different models for the micromagnetic analysis of this material class: (i) a description of the nanocomposite microstructure in terms of Stoner-Wohlfarth particles with and without the magnetodipolar interaction; (ii) a model based on the core-shell representation of the nanograins; (iii) the latter model including a contribution of superparamagnetic clusters. The relevant parameter spaces have been systematically scanned with the aim to establish which micromagnetic approach can most adequately describe experimental data for this material. According to our results, only the last, most sophisticated model is able to provide an excellent agreement with the measured hysteresis loop. The presented methodology is generally applicable to multiphase magnetic nanocomposites and it highligths the complex interrelationship between the microstructure, magnetic interactions, and the macroscopic magnetic properties.

cond-mat.mtrl-sci↗

arXiv2016

Spin structures of textured and isotropic Nd-Fe-B-based nanocomposites: Evidence for correlated crystallographic and spin texture

We report the results of a comparative study of the magnetic microstructure of textured and isotropic $\mathrm{Nd}_2\mathrm{Fe}_{14}\mathrm{B}/\alpha$-$\mathrm{Fe}$ nanocomposites using magnetometry, transmission electron microscopy, synchrotron x-ray diffraction, and, in particular, magnetic small-angle neutron scattering (SANS). Analysis of the magnetic neutron data of the textured specimen and computation of the correlation function of the spin misalignment SANS cross section suggests the existence of inhomogeneously magnetized regions on an intraparticle nanometer length scale, about $40-50 \, \mathrm{nm}$ in the remanent state. Possible origins for this spin disorder are discussed: it may originate in thin grain-boundary layers (where the materials parameters are different than in the $\mathrm{Nd}_2\mathrm{Fe}_{14}\mathrm{B}$ grains), or it may reflect the presence of crystal defects (introduced via hot pressing), or the dispersion in the orientation distribution of the magnetocrystalline anisotropy axes of the $\mathrm{Nd}_2\mathrm{Fe}_{14}\mathrm{B}$ grains. X-ray powder diffraction data reveal a crystallographic texture in the direction perpendicular to the pressing direction -- a finding which might be related to the presence of a texture in the magnetization distribution, as inferred from the magnetic SANS data.

cond-mat.mes-hall↗