arXiv subjects

Marvin Edelmann

Publications and source records attributed to Marvin Edelmann.

7 recordsLinked to original sources

arXiv2023

Performance Enhancement via XPM Suppression in a Linear all-PM NPE Mode-locked Fiber Oscillator

We demonstrate strong performance enhancement of an all polarization-maintaining fiber oscillator mode-locked using NPE in a linear self-stabilized fiber interferometer via suppression of cross-phase modulation (XPM). Numerical simulations reveal that XPM significantly affects the saturable absorber dynamics resulting in distortions of mode-locked steady-states. In the experiment, we construct an oscillator with XPM suppression, employing an intra-cavity YVO4 crystal, and compare its characteristics with a reference oscillator in standard configuration. It is shown, that XPM suppression not only lowers the mode-locking threshold by more than 40%, but further results in improved spectral pulse quality at the output ports and reduced nonlinear loss of the artificial saturable absorber.

physics.optics↗

arXiv2023

Watt-class CMOS-compatible power amplifier

Power amplifier is becoming a critical component for integrated photonics as the integrated devices try to carve out a niche in the world of real-world applications of photonics. That is because the signal generated from an integrated device severely lacks in power which is due mainly to the small size which, although gives size and weight advantage, limits the energy storage capacity of an integrated device due to the small volume, causing it to rely on its bench-top counterpart for signal amplification downstream. Therefore, an integrated high-power signal booster can play a major role by replacing these large solid-state and fiber-based benchtop systems. For decades, large mode area (LMA) technology has played a disruptive role by increasing the signal power and energy by orders of magnitude in the fiber-based lasers and amplifiers. Thanks to the capability of LMA fiber to support significantly larger optical modes the energy storage and handling capability has significantly increased. Such an LMA device on an integrated platform can play an important role for high power applications. In this work, we demonstrate LMA waveguide based CMOS compatible watt-class power amplifier with an on-chip output power reaching ~ 1W within a footprint of ~4mm2.The power achieved is comparable and even surpasses many fiber-based amplifiers. We believe this work opens up opportunities for integrated photonics to find real world application on-par with its benchtop counterpart.

physics.optics↗

arXiv2023

Intra-Pulse Intensity Noise Shaping by Saturable Absorbers

In this work, we identify and characterize intra-pulse intensity noise shaping by saturable absorbers applied in mode-locked lasers and ultra-low noise nonlinear fiber amplifiers. Reshaped intra-pulse intensity noise distributions are shown to be inevitably interconnected with self-amplitude modulation, the fundamental physical mechanism for initiation and stabilization of ultra-short pulses in the steady-state of a mode-locked laser. A theoretical model is used to describe the ultrafast saturation dynamics by an intra-pulse noise transfer function for widely-applied slow and fast saturable absorbers. For experimental verification of the theoretical results, spectrally-resolved relative intensity noise measurements are applied on chirped input pulses to enable the direct measurement of intra-pulse noise transfer functions using a versatile experimental platform. It is further demonstrated, how the characterized intra-pulse intensity noise distribution of ultrafast laser systems can be utilized for quantum-limited intensity noise suppression via tailored optical bandpass filtering.

physics.optics↗

arXiv2022

Large-mode-area Soliton Fiber Oscillator Mode-locked with Linear Self-stabilized Interferometer

In this work, we investigate an approach to scale up the output pulse energy in an all polarization-maintaining 17 MHz Yb-doped fiber oscillator via implementation of 25 um core-diameter large-mode-area fibers. The artificial saturable absorber in form of a Kerr-type self-stabilized fiber-interferometer enables highly stable mode-locked steady-states in the soliton-like operation regime with 170 mW average output power and a total output pulse energy of ~10 nJ distributed between two output ports. An experimental parameter comparison with a reference oscillator made of 5.5 um core-sized standard fiber-components reveals an increase of pulse energy by a factor of 36 with simultaneously reduced intensity-noise in the high frequency range > 100 kHz.

physics.optics↗

arXiv2021

All-PM Divided Pulse Fiber Oscillator Mode-locked with the Optical Kerr-effect

In this letter, we investigate a Yb-doped mode-locked fiber oscillator that uses coherent pulse division and recombination to avoid excessive nonlinear phase shifts. The mode-locking mechanism of the laser is based on the accumulation of a differential nonlinear phase between orthogonal polarization modes in the polarization-maintaining fiber segment. The inserted coherent pulse divider, based on YVO4-crystals rotated successively by 45°, enables stable and undistorted mode-locked steady-states. The output pulse energy is increased from 89 pJ in the non-divided operation by ~6.5 dB to more than 400 pJ with three divisions. Measurements of the amplitude-fluctuations reveal a simultaneous broadband reduction of up to ~9 dB in the frequency range from 10 kHz to 2MHz.

physics.optics↗

arXiv2021

Nonlinear Fiber System for Shot-noise Limited Intensity Noise Suppression and Amplification

We propose a nonlinear fiber system for shot-noise limited, all-optical intensity-noise reduction and signal amplification. The mechanism is based on the accumulation of different nonlinear phase shifts between orthogonal polarization modes in a polarization-maintaining fiber amplifier in combination with an implemented sinusoidal transmission-function. The resulting correlation between the input intensity-fluctuations and the system transmission enables tunable intensity noise reduction of the input pulse train. In the experiment, the noise spectral density of a mode-locked oscillator is suppressed by up to ~20 dB to the theoretical shot-noise limit of the measurement at -151.3 dBc/Hz with simultaneous pulse amplification of 13.5dB.

physics.optics↗

arXiv2020

Intrinsic Amplitude-Noise Suppression in Fiber Lasers Mode-locked with Nonlinear Amplifying Loop Mirrors

In this work, we investigate the steady-states of a fiber lasers mode-locked with a nonlinear amplifying loop-mirror that has an inherent amplitude noise-suppression mechanism. Due to the interaction of the sinusoidal transmission function with the fluctuating intracavity pulse amplitude we show that this mechanism may lead to a detectable difference in relative intensity noise at the reflected and transmitted output port under specific preconditions. We present systematic intensity noise measurements with a nonlinear fiber-based system that replicates a single roundtrip in the laser cavity. Experimental results and simulations clearly show a reduction of the intracavity amplitude fluctuations up to 4 dB for certain steady-states.

physics.optics↗