arXiv subjects

Martin Wenderoth

Publications and source records attributed to Martin Wenderoth.

12 recordsLinked to original sources

arXiv2025

Growth dynamics of graphene buffer layer formation on ultra-smooth SiC(0001) surfaces

In this study the growth process of epitaxial graphene on SiC was investigated systematically. The transition from the initial buffer layer growth to the formation of the first monolayer graphene domains was investigated by various techniques: atomic force microscopy, low energy electron diffraction, low energy electron microscopy, Raman spectroscopy, scanning tunneling spectroscopy and scanning electron microscopy. The data show that the buffer layer formation goes along with a simultaneous SiC decomposition which takes place as a rapid step retraction of one specific type of SiC bilayer in good agreement with the step retraction model. Once the buffer layer coverage is completed, the resulting characteristic regular repeating terrace and step height pattern of one and two SiC bilayers turned out to be very stable against further SiC decomposition. The following initial growth of monolayer graphene domains occurs, interestingly, only along the two bilayer high terrace edges. This behavior is explained by a preferential SiC decomposition at the higher step edges and it has some potential for spatial graphene growth control. The corresponding earlier graphene growth on one terrace type can explain the different scanning tunneling spectroscopy nanoscale resistivities on these terraces.

cond-mat.mtrl-sci↗

arXiv2025

Mesoscopic scale study of lateral dynamics of Sn-intercalation of the buffer layer on SiC

The dynamics of Sn intercalation of the buffer layer on SiC was investigated with a frozen-in diffusion front using Kelvin Probe Force Microscopy. The technique allows to laterally distinguish between intercalated regions and the pristine buffer layer. Comparing topography features with the surface potential on the mesoscopic scale confirms that surface steps act as transport barriers. The results show a distinct pin hole mechanism for the material flow from terrace to terrace of the vicinal substrate surface. Nucleation and the formation of tin intercalated phase on terraces happen at steps. This results in a mesoscopic growth against the macroscopic diffusion direction.

cond-mat.mes-hall↗

arXiv2021

Hydrogen related defects in titanium dioxide at the interface to palladium

A metal oxide support and a catalytically active metal are the two main ingredients for complex catalysts used in heterogeneous catalysis. The gas environment can change the catalyst during the reaction, modifying its structural and electronic properties. Here, we use monochromated electron energy loss spectroscopy (EELS) to reveal hydrogen-pressure-dependent changes of the electronic structure at the Pd/rutile-TiO$_2$ interface in an environmental transmission electron microscope (ETEM). Hydrogen-induced changes are observed in rutile-TiO$_2$ within $2$~nm from the interface at $10$~Pa of hydrogen pressure, in the Ti $L_{3,2}$ EEL spectra. Lower pressures such as $1$~Pa show no changes in the EEL spectra. We attribute the observed changes in the EEL spectra to hydrogen-induced defects accumulating in the vicinity of the interface. Based on DFT calculations, we developed a thermodynamic multistate defect (TMD) model of the interface and the bulk of the rutile-TiO$_2$. This TMD model predicts high concentrations of positively charged defects accumulating at the interface. The presence of the Schottky barrier stabilizes these defects by significantly lowering their formation energy. Our findings provide important new insights into catalytic processes taking place at metal/metal oxide interfaces in hydrogen gas environments.

cond-mat.mtrl-sci↗

arXiv2021

Scanning Tunneling Spectroscopy of Subsurface Ag and Ge Impurities in Copper

We investigate single Ge and Ag impurities buried below a Cu(100) surface using low temperature scanning tunneling microscopy. The interference patterns in the local density of states are surface scattering signatures of the bulk impurities, which result from 3D Friedel oscillations and the electron focusing effect. Comparing the isoelectronic d scatterer Ag and the sp scatterer Ge allows to distinguish contributions from impurity scattering and the host. Energy-independent effective scattering phase shifts are extracted using a plane wave tight-binding model and reveal similar values for both species. A comparison with ab-initio calculations suggests incoherent sp scattering processes at the Ge impurity. As both scatterers are spectrally homogeneous, scanning tunneling spectroscopy of the interference patterns yields real-space signatures of the bulk electronic structure. We find a kink around zero bias for both species that we assign to a renormalization of the band structure due to many-body effects, which can be described with a Debye self-energy and a surprisingly high electron-phonon coupling parameter $\lambda$. We propose that this might originate from bulk propagation in the vicinity of the surface.

cond-mat.mes-hall↗

arXiv2020

Structure and Non-Equilibrium Heat-Transfer of a Physisorbed Molecular Layer on Graphene

The structure of a physisorbed sub-monolayer of 1,2-bis(4-pyridyl)ethylene (bpe) on epitaxial graphene is investigated by Low-Energy Electron Diffraction and Scanning Tunneling Microscopy. Additionally, non-equilibrium heat-transfer between bpe and the surface is studied by Ultrafast Low-Energy Electron Diffraction. Bpe arranges in an oblique unit cell which is not commensurate with the substrate. Six different rotational and/or mirror domains, in which the molecular unit cell is rotated by 28{\pm}0.1{\deg} with respect to the graphene surface, are identified. The molecules are weakly physisorbed, as evidenced by the fact that they readily desorb at room temperature. At liquid nitrogen temperature, however, the layers are stable and time-resolved experiments can be performed. The temperature changes of the molecules and the surface can be measured independently through the Debye-Waller factor of their individual diffraction features. Thus, the heat flow between bpe and the surface can be monitored on a picosecond timescale. The time-resolved measurements, in combination with model simulations, show the existence of three relevant thermal barriers between the different layers. The thermal boundary resistance between the molecular layer and graphene was found to be 2{\pm}1{\cdot}10-8 K m2 W-1.

cond-mat.mtrl-sci↗

arXiv2019

Substrate induced nanoscale resistance variation in epitaxial graphene

Graphene, the first true two-dimensional material still reveals the most remarkable transport properties among the growing class of two-dimensional materials. Although many studies have investigated fundamental scattering processes, the surprisingly large variation in the experimentally determined resistances associated with a localized defect is still an open issue. Here, we quantitatively investigate the local transport properties of graphene prepared by polymer assisted sublimation growth (PASG) using scanning tunneling potentiometry. PASG graphene is characterized by a spatially homogeneous current density, which allows to analyze variations in the local electrochemical potential with high precision. We utilize this possibility by examining the local sheet resistance finding a significant variation of up to 270% at low temperatures. We identify a correlation of the sheet resistance with the stacking sequence of the 6H-SiC substrate as well as with the distance between the graphene sheet and the substrate. Our results experimentally quantify the strong impact of the graphene-substrate interaction on the local transport properties of graphene.

cond-mat.mes-hall↗

arXiv2019

Conductivity of Dirac-like surface states in correlated honeycomb transition metal oxide Mott insulators

The search for materials with novel and unusual electronic properties is at the heart of condensed matter physics as well as the basis to develop conceptual new technologies. In this context, the correlated honeycomb transition metal oxides attract large attention for both, being a possible experimental realization of the theoretically predicted magnetic Kitaev exchange and the theoretical prospect of topological nontriviality. The Mott insulating sodium iridate is prototypical among these materials with the promising prospect to bridge the field of strongly correlated systems with topology, finally opening a path to a wide band gap material with exotic surface properties. Here, we report a profound study of the electronic properties of ultra-high-vacuum cleaved surfaces combining transport measurements with scanning tunneling techniques, showing that multiple conductive channels with differing nature are simultaneously apparent in this material. Most importantly, a V-shaped density of states and a low sheet resistance, in spite of a large defect concentration, point towards a topologically protected surface conductivity contribution. By incorporating the issue of the addressability of electronic states in the tunneling process, we develop a framework connecting previous experimental results as well as theoretical considerations.

cond-mat.str-el↗

arXiv2014

Interplay between Kondo effect and Ruderman-Kittel-Kasuya-Yosida interaction

The interplay between the Ruderman-Kittel-Kasuya-Yosida (RKKY) interaction and the Kondo effect is expected to provide the driving force for the emergence of many phenomena in strongly correlated electron materials. Two magnetic impurities in a metal are the smallest possible system containing all these ingredients and define a bottom up approach towards a long term understanding of concentrated / dense systems. Here we report on the experimental and theoretical investigation of iron dimers buried below a Cu(100) surface by means of low temperature scanning tunnelling spectroscopy (STS) combined with density functional theory (DFT) and numerical renormalization group (NRG) calculations. The Kondo effect, in particular the width of the Abrikosov-Suhl resonance, is strongly altered or even suppressed due to magnetic coupling between the impurities. It oscillates as function of dimer separation revealing that it is related to the RKKY interaction mediated by the conduction electrons. Simulations based on density functional theory support this concept showing the same oscillation period and trends in the coupling strength as found in the experiment.

cond-mat.str-el↗

arXiv2013

Fixing the Energy Scale in Scanning Tunneling Microscopy on Semiconductor Surfaces

In scanning tunneling experiments on semiconductor surfaces, the energy scale within the tunneling junction is usually unknown due to tip-induced band bending. Here, we experimentally recover the zero point of the energy scale by combining scanning tunneling microscopy with Kelvin probe force spectroscopy. With this technique, we revisit shallow acceptors buried in GaAs. Enhanced acceptor-related conductance is observed in negative, zero, and positive band-bending regimes. An Anderson-Hubbard model is used to rationalize our findings, capturing the crossover between the acceptor state being part of an impurity band for zero band bending, and the acceptor state being split off and localized for strong negative or positive band bending, respectively.

cond-mat.mes-hall↗

arXiv2012

Mapping Itinerant Electrons around Kondo Impurities

We investigate single Fe and Co atoms buried below a Cu(100) surface using low temperature scanning tunneling spectroscopy. By mapping the local density of states of the itinerant electrons at the surface, the Kondo resonance near the Fermi energy is analyzed. Probing bulk impurities in this well-defined scattering geometry allows separating the physics of the Kondo system and the measuring process. The line shape of the Kondo signature shows an oscillatory behavior as a function of depth of the impurity as well as a function of lateral distance. The oscillation period along the different directions reveals that the spectral function of the itinerant electrons is anisotropic.

cond-mat.mes-hall↗

arXiv2011

Long-range Kondo signature of a single magnetic impurity

The Kondo effect, one of the oldest correlation phenomena known in condensed matter physics, has regained attention due to scanning tunneling spectroscopy (STS) experiments performed on single magnetic impurities. Despite the sub-nanometer resolution capability of local probe techniques one of the fundamental aspects of Kondo physics, its spatial extension, is still subject to discussion. Up to now all STS studies on single adsorbed atoms have shown that observable Kondo features rapidly vanish with increasing distance from the impurity. Here we report on a hitherto unobserved long range Kondo signature for single magnetic atoms of Fe and Co buried under a Cu(100) surface. We present a theoretical interpretation of the measured signatures using a combined approach of band structure and many-body numerical renormalization group (NRG) calculations. These are in excellent agreement with the rich spatially and spectroscopically resolved experimental data.

cond-mat.str-el↗

arXiv2010

Theory of real space imaging of Fermi surfaces

A scanning tunneling microscope can be used to visualize in real space Fermi surfaces with buried impurities far below substrates acting as local probes. A theory describing this feature is developed based on the stationary phase approximation. It is demonstrated how a Fermi surface of a material acts as a mirror focusing electrons that scatter at hidden impurities.

cond-mat.mes-hall↗