arXiv subjects

Martin Setvin

Publications and source records attributed to Martin Setvin.

At least 19 recordsLinked to original sources

arXiv2026

A solid-solution approach for room-temperature bulk plasticity in KTa1-xNbxO3

Dislocations are being engineered into perovskite oxides to harvest versatile functional properties. One major bottleneck, however, persists: perovskite oxides that can be engineered with dislocations, particularly via mechanical deformation at room temperature in bulk scale, have so far been limited to only three materials: SrTiO3 (2001, Brunner et al.), KNbO3 (2016, Mark et al.), and KTaO3 (2024, Fang & Zhang et al.). Here, we propose a simple and effective approach by using solid solution to significantly extend the range of materials. We showcase KTa1-xNbxO3 (0<x<1) perovskite oxides for their bulk plasticity at room temperature by constructing a closed-loop validation workflow that includes crystal growth, Brinell indentation, bulk compression, and transmission electron microscopy characterization. Our findings are expected to unlock the materials toolbox for dislocation-tuned functionality of perovskite oxides.

cond-mat.mtrl-sci↗

arXiv2026

Photoexcited Hole States at the SrTiO3(001) Surface Imaged with Noncontact AFM

The behaviour of excess charges in ionic lattices, such as the formation of polarons and charge trapping at defect sites, influences the physical and chemical properties of materials and translates into applications in electronics, optics, photovoltaics, and catalysis. Here we show that the bulk-terminated SrTiO3(001) surface accumulates photoexcited charges and keeps the associated photovoltage for many days at cryogenic temperatures. A combination of scanning tunneling microscopy, atomic force microscopy (STM/AFM) and Kelvin probe force microscopy (KPFM) was used to measure this photovoltage and to localize the photoexcited charges with atomic precision down to the single-quasiparticle limit. Density functional theory (DFT) shows that holes favor localization at oxygen 2p orbitals adjacent to Sr vacancies, creating long-lived trapped states. The methodology presented here provides guidelines for imaging of charges trapped in the crystal lattice using noncontact AFM.

cond-mat.mtrl-sci↗

arXiv2026

Competition between clustering and dispersion of cobalt atoms on perovskite surfaces: SrTiO3(001) and KTaO3(001)

Perovskite oxides are attractive for reactions in photo/electrocatalytic schemes, and extrinsic doping is a common strategy for tuning their properties. It is widely known that extrinsic dopants impact the structure and stability of perovskite surfaces, but an atomic-scale view is missing. Here, noncontact atomic force microscopy (ncAFM) and photoelectron spectroscopy (XPS/PES) are used to combine microscopic and spectroscopic evidence of cobalt adsorption, incorporation, and clustering at surfaces of two prototypical perovskites SrTiO3 and KTaO3. A number of different sub-ML coverages and temperatures of annealing were investigated. Several common features are observed: cobalt shows a strong preference for ionic nature (+2 and +3 charge states), and remains dispersed as single atoms to a certain extent in both perovskites. Two competing mechanisms are observed upon annealing: coalescence into clusters with a mixed metallic/ionic character, and incorporation into the surface and subsurface regions. The latter is more pronounced in SrTiO3, where a cobalt-stabilized surface reconstruction is identified, whereas for KTaO3 cobalt likely incorporates in the near-surface region.

cond-mat.mtrl-sci↗

arXiv2024

Room-temperature bulk plasticity and tunable dislocation densities in KTaO3

We report room-temperature bulk plasticity mediated by dislocations in single-crystal cubic KTaO3, contrasting the conventional knowledge that single-crystal KTaO3 is susceptible to brittle cleavage. A mechanics-based combinatorial experimental approach using cyclic Brinell indentation, scratching, and uniaxial bulk compression consistently demonstrates room-temperature dislocation plasticity in KTaO3 from the mesoscale to the macroscale. This approach also delivers tunable dislocation densities and plastic zone sizes. Scanning transmission electron microscopy analysis underpins the activated slip system to be <110>{1-10}. Given the growing significance of KTaO3 as an emerging electronic oxide and the increasing interest in dislocations for tuning physical properties of oxides, our findings are expected to trigger synergistic research interest in KTaO3 with dislocations.

cond-mat.mtrl-sci↗

arXiv2024

Machine Learning Based Prediction of Polaron-Vacancy Patterns on the TiO$_2$(110) Surface

The multifaceted physics of oxides is shaped by their composition and the presence of defects, which are often accompanied by the formation of polarons. The simultaneous presence of polarons and defects, and their complex interactions, pose challenges for first-principles simulations and experimental techniques. In this study, we leverage machine learning and a first-principles database to analyze the distribution of surface oxygen vacancies (V$_{\rm O}$) and induced small polarons on rutile TiO$_2$(110), effectively disentangling the interactions between polarons and defects. By combining neural-network supervised learning and simulated annealing, we elucidate the inhomogeneous V$_{\rm O}$ distribution observed in scanning probe microscopy (SPM). Our innovative approach allows us to understand and predict defective surface patterns at previously inaccessible length scales, identifying the specific role of individual types of defects. Specifically, surface-polaron-stabilizing V$_{\rm O}$-configurations are identified, which could have consequences for surface reactivity.

cond-mat.mtrl-sci↗

arXiv2023

A Multi-Technique Study of C2H4 Adsorption on Fe3O4(001)

The adsorption/desorption of ethene (C2H4), also commonly known as ethylene, on Fe3O4(001) was studied under ultrahigh vacuum conditions using temperature programmed desorption (TPD), scanning tunneling microscopy, x-ray photoelectron spectroscopy, and density functional theory (DFT) based computations. To interpret the TPD data, we have employed a new analysis method based on equilibrium thermodynamics. C2H4 adsorbs intact at all coverages and interacts most strongly with surface defects such as antiphase domain boundaries and Fe adatoms. On the regular surface, C2H4 binds atop surface Fe sites up to a coverage of 2 molecules per (rt2xrt2)R45{\deg} unit cell, with every second Fe occupied. A desorption energy of 0.36 eV is determined by analysis of the TPD spectra at this coverage, which is approximately 0.1-0.2 eV lower than the value calculated by DFT + U with van der Waals corrections. Additional molecules are accommodated in between the Fe rows. These are stabilized by attractive interactions with the molecules adsorbed at Fe sites. The total capacity of the surface for C2H4 adsorption is found to be close to 4 molecules per (rt2xrt2)R45{\deg} unit cell.

cond-mat.mtrl-sci↗

arXiv2023

Direct assessment of the proton affinity of individual surface hydroxyls with non-contact atomic force microscopy

The state of protonation/deprotonation of surfaces has far-ranging implications in all areas of chemistry: from acid-base catalysis$^1$ and the electro- and photocatalytic splitting of water$^2$, to the behavior of minerals$^3$ and biochemistry$^4$. The acidity of a molecule or a surface site is described by its proton affinity (PA) and pK$_\mathrm{a}$ value (the negative logarithm of the equilibrium constant of the proton transfer reaction in solution). For solids, in contrast to molecules, the acidity of individual sites is difficult to assess. For mineral surfaces such as oxides they are estimated by semi-empirical concepts such as bond-order valence sums$^5$, and also increasingly modeled with first-principles molecular dynamics simulations$^{6,7}$. Currently such predictions cannot be tested - the experimental measures used for comparison are typically average quantities integrated over the whole surface or, in some cases, individual crystal facets$^8$, such as the point of zero charge (pzc)$^9$. Here we assess individual hydroxyls on In$_2$O$_3$(111), a model oxide with four different types of surface oxygen atoms, and probe the strength of their hydrogen bond with the tip of a non-contact atomic force microscope (AFM). The force curves are in quantitative agreement with density-functional theory (DFT) calculations. By relating the results to known proton affinities and pK$_\mathrm{a}$ values of gas-phase molecules, we provide a direct measure of proton affinity distributions at the atomic scale.

cond-mat.mtrl-sci↗

arXiv2023

Real-space investigation of polarons in hematite Fe2O3

In polarizable materials, electronic charge carriers interact with the surrounding ions, leading to quasiparticle behaviour. The resulting polarons play a central role in many materials properties including electrical transport, optical properties, surface reactivity and magnetoresistance, and polaron properties are typically investigated indirectly through such macroscopic characteristics. Here, noncontact atomic force microscopy (nc-AFM) is used to directly image polarons in Fe2O3 at the single quasiparticle limit. A combination of Kelvin probe force microscopy (KPFM) and kinetic Monte Carlo (KMC) simulations shows that Ti doping dramatically enhances the mobility of electron polarons, and density functional theory (DFT) calculations indicate that a metallic transition state is responsible for the enhancement. In contrast, hole polarons are significantly less mobile and their hopping is hampered further by the introduction of trapping centres.

cond-mat.mtrl-sci↗

arXiv2023

Hematite ${\alpha}-Fe_{2}O_{3}(0001)$ in top and side view: resolving long-standing controversies about its surface structure

Hematite ${\alpha}-Fe_{2}O_{3}(0001)$ is the most-investigated iron oxide model system in photo and electrocatalytic research. The rich chemistry of Fe and O allows for many bulk and surface transformations, but their control is challenging. This has led to controversies regarding the structure of the topmost layers. This comprehensive study combines surface methods (nc-AFM, STM, LEED, and XPS) complemented by structural and chemical analysis of the near-surface bulk (HRTEM and EELS). The results show that a compact 2D layer constitutes the topmost surface of ${\alpha}-Fe_{2}O_{3}(0001)$; it is locally corrugated due to the mismatch with the bulk. Assessing the influence of naturally-occurring impurities shows that these can force the formation of surface phases that are not stable on pure samples. Impurities can also cause the formation of ill-defined inclusions in the subsurface and modify the oxidation phase diagram of hematite. The results provide a significant step forward in determining the hematite surface structure that is crucial for accurately modeling catalytic reactions. Combining surface and cross-sectional imaging provided the full view that is essential for understanding the evolution of the near-surface region of oxide surfaces under oxidative conditions.

cond-mat.mtrl-sci↗

arXiv2022

CO oxidation by Pt2/Fe3O4: metastable dimer and support configurations facilitate lattice oxygen extraction

Heterogeneous catalysts based on sub-nanometer metal clusters often exhibit strongly size-dependent properties, and the addition or removal of a single atom can make all the difference. Identifying the most active species and deciphering the reaction mechanism is extremely difficult, however, because it is often not clear how the catalyst evolves in operando. Here, we utilize a combination of atomically resolved scanning probe microscopies, spectroscopic techniques, and density functional theory (DFT)-based calculations to study CO oxidation by a model Pt/Fe3O4(001) single-atom catalyst. We demonstrate that (PtCO)2 dimers, formed dynamically through the agglomeration of mobile Pt-carbonyl species, catalyse a reaction involving the oxide support to form CO2. Pt2 dimers produce one CO2 molecule before falling apart into two adatoms, releasing the second CO. Interestingly, Olattice extraction only becomes facile when both the Pt-dimer and the Fe3O4 support can access metastable configurations, suggesting that substantial, concerted rearrangements of both cluster and support must be considered for reactions occurring at elevated temperature.

cond-mat.mtrl-sci↗

arXiv2022

Automated Real-Space Lattice Extraction for Atomic Force Microscopy Images

Analyzing atomically resolved images is a time-consuming process requiring solid experience and substantial human intervention. In addition, the acquired images contain a large amount of information such as crystal structure, presence and distribution of defects, and formation of domains, which need to be resolved to understand a material's surface structure. Therefore, machine learning techniques have been applied in scanning probe and electron microscopies during the last years, aiming for automatized and efficient image analysis. This work introduces a free and open source tool (AiSurf: Automated Identification of Surface Images) developed to inspect atomically resolved images via Scale-Invariant Feature Transform (SIFT) and Clustering Algorithms (CA). AiSurf extracts primitive lattice vectors, unit cells, and structural distortions from the original image, with no pre-assumption on the lattice and minimal user intervention. The method is applied to various atomically resolved non-contact atomic force microscopy (AFM) images of selected surfaces with different levels of complexity: anatase TiO2(101), oxygen deficient rutile TiO2(110) with and without CO adsorbates, SrTiO3(001) with Sr vacancies and graphene with C vacancies. The code delivers excellent results and has proved to be robust against atom misclassification and noise, thereby facilitating the interpretation scanning probe microscopy images.

cond-mat.mtrl-sci↗

arXiv2022

Competing electronic states emerging on polar surfaces

Excess charge on polar surfaces of ionic compounds is commonly described by the two-dimensional electron gas (2DEG) model, a homogeneous distribution of charge, spatially-confined in a few atomic layers. Here, by combining scanning probe microscopy with density functional theory calculations, we show that excess charge on the polar TaO$_2$ termination of KTaO$_3$(001) forms more complex electronic states with different degrees of spatial and electronic localization: charge density waves (CDW) coexist with strongly-localized electron polarons and bipolarons. These surface electronic reconstructions, originating from the combined action of electron-lattice interaction and electronic correlation, are energetically more favorable than the 2DEG solution. They exhibit distinct spectroscopy signals and impact on the surface properties, as manifested by a local suppression of ferroelectric distortions. Controlling the degree of charge ordering and the transition from ferroelectric to paraelectric states could be of great benefit for the generation and transport of carriers in electronic applications.

cond-mat.mtrl-sci↗

arXiv2020

Fast low-noise transimpedance amplifier for scanning tunneling microscopy and beyond

A transimpedance amplifier has been designed for scanning tunneling microscopy (STM). The amplifier features low noise (limited by the Johnson noise of the 1 G{\Omega} feedback resistor at low input current and low frequencies), sufficient bandwidth for most STM applications (50 kHz at 35 pF input capacitance), a large dynamic range (0.1 pA--50 nA without range switching), and a low input voltage offset. The amplifier is also suited for placing its first stage into the cryostat of a low-temperature STM, minimizing the input capacitance and reducing the Johnson noise of the feedback resistor. The amplifier may also find applications for specimen current imaging and electron-beam-induced current measurements in scanning electron microscopy and as a photodiode amplifier with a large dynamic range. This paper also discusses the sources of noise including the often neglected effect of non-balanced input impedance of operational amplifiers and describes how to accurately measure and adjust the frequency response of low-current transimpedance amplifiers.

physics.ins-det↗

arXiv2018

Defect chemistry of Eu dopants in NaI scintillators studied by atomically resolved force microscopy

Activator impurities and their distribution in the host lattice play a key role in scintillation phenomena. Here a combination of cross-sectional noncontact atomic force microscopy (nc-AFM), X-ray photoelectron spectroscopy (XPS) and density functional theory (DFT) was used to study the distribution of Eu2+ dopants in a NaI scintillator activated by 3% of EuI2. Two types of precipitate structures were found. First, needle-shaped EuI2 precipitates with a layered structure are likely responsible for scattering the scintillation light. In transparent crystals with good scintillation properties, precipitates with a cubic crystal structure and a size below 4 nm were found. A surprisingly low concentration of point defects was detected in all of the investigated samples. Upon annealing, Eu segregates towards the surface, which results in the formation of an ordered hexagonal overlayer with the EuI2 composition and a pronounced, unidirectional moire pattern.

cond-mat.mtrl-sci↗

arXiv2018

Incipient ferroelectricity: A route towards bulk-terminated SrTiO3

Perovskite oxides attract increasing attention due to their broad potential in many applications. Understanding their surfaces is challenging, though, because the ternary composition of the bulk allows for multiple stable surface terminations. We demonstrate a simple procedure for preparing the bulk-terminated (001) surface of SrTiO3, a prototypical cubic perovskite. Controlled application of strain on a SrTiO3 single crystal results in a flat cleavage with micrometer-size domains of SrO and TiO2. Distribution of these two terminations is dictated by ferroelectric domains induced by strain during the cleavage process. Atomically-resolved scanning tunneling microscopy/atomic force microscopy (STM/AFM) measurements reveal the presence of point defects in a well-defined concentration of (14+-2)%; Sr vacancies form at the SrO termination and complementary Sr adatoms appear at the TiO2 termination. These intrinsic defects are induced by the interplay between ferroelectricity, surface polarity, and surface charge.

cond-mat.mtrl-sci↗

arXiv2018

Interplay between adsorbates and polarons: CO on rutile TiO$_2$(110)

Polaron formation plays a major role in determining the structural, electrical and chemical properties of ionic crystals. Using a combination of first principles calculations and scanning tunneling microscpoy/atomic force microscopy (STM/AFM), we analyze the interaction of polarons with CO molecules adsorbed on the rutile TiO$_2$(110) surface. Adsorbed CO shows attractive coupling with polarons in the surface layer, and repulsive interaction with polarons in the subsurface layer. As a result, CO adsorption depends on the reduction state of the sample. For slightly reduced surfaces, many adsorption configurations with comparable adsorption energies exist and polarons reside in the subsurface layer. At strongly reduced surfaces, two adsorption configurations dominante: either inside an oxygen vacancy, or at surface Ti$_{5c}$ sites, coupled with a surface polaron.

cond-mat.mtrl-sci↗

arXiv2018

Formation and dynamics of small polarons on the rutile TiO$_2$(110) surface

Charge trapping and formation of polarons is a pervasive phenomenon in transition metal oxide compounds, in particular at the surface, affecting fundamental physical properties and functionalities of the hosting materials. Here we investigate via first-principle techniques the formation and dynamics of small polarons on the reduced surface of titanium dioxide, an archetypal system for polarons, for a wide range of oxygen vacancy concentrations. We report how the essential features of polarons can be adequately accounted in terms of few quantities: the local structural and chemical environment, the attractive interaction between negatively charged polarons and positively charged oxygen vacancies, and the spin-dependent polaron-polaron Coulomb repulsion. We combined molecular dynamics simulations on realistic samples derived from experimental observations with simplified static models, aiming to disentangle the various variables at play. We find that depending on the specific trapping site, different types of polarons can be formed, with distinct orbital symmetries and different degree of localization and structural distortion. The energetically most stable polaron site is the subsurface Ti atom below the undercoordinated surface Ti atom, owing to a small energy cost to distort the lattice and a suitable electrostatic potential. Polaron-polaron repulsion and polaron-vacancy attraction determine the spatial distribution of polarons as well as the energy of the polaronic in-gap state. In the range of experimentally reachable oxygen vacancy concentrations the calculated data are in excellent agreement with observations, thus validating the overall interpretation.

cond-mat.mtrl-sci↗

arXiv2018

Charge Trapping at the Step Edges of TiO2 Anatase (101)

A combination of Photoemission, Atomic Force and Scanning Tunneling Microscopy/Spectroscopy measurements shows that excess electrons in TiO2 anatase (101) surface are trapped at step edges. Consequently, steps act as preferred adsorption sites for O2. In Density Functional Theory calculations electrons localize at clean step edges, this tendency is enhanced by O vacancies and hydroxylation. The results show the importance of defects for the wide-ranging applications of titania.

cond-mat.mtrl-sci↗