arXiv subjects

Martin Oettel

Publications and source records attributed to Martin Oettel.

At least 19 recordsLinked to original sources

arXiv2026

Cubic-Equivariant Neural Density Functional Theory for Three-Dimensional Lattice Fluids

We construct a neural classical density functional that acts directly on unrestricted three-dimensional density profiles. As a computationally tractable test bed, we consider parallel hard cubes of side length three on a simple cubic lattice. A fully convolutional network learns the one-body direct-correlation functional $c^{(1)}[\rho]$ from data obtained with grand-canonical Monte Carlo simulations in randomized external potentials. Complete profiles are used during both training and inference; a stochastic Bernoulli mask on the output sites makes full-profile training effective without explicitly extracting and storing overlapping local density windows. Averaging the first-layer kernels over all 48 rotations and reflections of the cubic point group additionally imposes exact cubic equivariance without data augmentation. We compare the learned functional with independent simulation data and with the lattice fundamental-measure functional of Lafuente and Cuesta. The neural functional markedly improves the homogeneous equation of state and the density profile at a planar hard wall. For the anisotropic pair distribution around a fixed particle, both functionals reproduce the principal packing shells, with their relative accuracy depending on crystallographic direction. These results demonstrate neural density-functional calculations on complete three-dimensional profiles while also identifying accurate full-dimensional training data, thermodynamic consistency, and structural correlations as the central challenges for extensions to continuum fluids.

cond-mat.stat-mech↗

arXiv2026

Free-volume origin of diverging direct correlations in hard crystals: insights from an exact one-dimensional model

Second order direct correlation functions in three-dimensional hard-sphere crystals have much larger amplitudes (of the order of $1/n_{\mathrm{vac}}$ where $n_{\mathrm{vac}}$ is the vacancy concentration) and a more strongly structured spatial form of apparent shorter range than their liquid-state counterparts. We separate the two underlying questions---why the correlations are large and why they have the form they do---using the exact one-dimensional Percus functional for hard rods. A periodic crystal-like density is represented by Gaussian peaks with occupation probability $q=1-n_{\mathrm{vac}}$. The relevant thermodynamic quantity is the local insertion free volume $A(x)$. Its minimum can be written as $A_{\mathrm{min}} =\Delta_{\alpha a}+(1-\Delta_{\alpha a})n_{\mathrm{vac}}$, where $\Delta_{\alpha a}$ is the residual free volume at full occupation caused by finite localization (characterized by a width parameter $\alpha$) and lattice spacing $a$. The first and second direct correlations therefore contain the singular dependences $c^{(1)}\sim\ln A_{\mathrm{min}} $ and $c^{(2)} \sim-1/A_{\mathrm{min}} $. The observed $1/n_{\mathrm{vac}}$ dependence is the vacancy-dominated limit $n_{\mathrm{vac}}\gg\Delta_{\alpha a}$, rather than the most general result. The spatial form of $c^{(2)}$ has a separate geometrical origin: the hard-rod weight functions select configurations in which exclusion intervals and their boundaries intersect regions of small free volume. This produces plateaus, edges, and localized ridges tied to the underlying periodic density. A numerical solution of the inhomogeneous Ornstein--Zernike equation shows how these singular direct correlations are redistributed in the total and pair correlations. The model provides a minimal free-volume explanation for both the magnitude and the lattice-specific form of crystalline direct correlation functions.

cond-mat.stat-mech↗

arXiv2026

Structural crossovers of quasi-one-dimensional patchy hard superellipses

We study a quasi-one-dimensional associating fluid composed of hard superellipses carrying two patches interacting through a directional Kern--Frenkel potential. Using the Transfer Operator Method, we show that the selective patch--patch association promotes horizontal alignment and chain formation at low-to-intermediate densities, whereas hard-core interaction favours vertical alignment without bonds at high densities. The competition between these two mechanisms drives a structural crossover upon compression from a horizontally aligned bonded chain structure to a completely unbonded, vertically aligned structure. While patchy ellipses undergo a tilted-to-vertical realignment, patchy rectangle-like superellipses exhibit a horizontal-to-vertical change. These structural changes manifest as a plateau in the equation of state. To capture these properties, we generalise Wertheim's first-order thermodynamic perturbation theory by introducing an orientation-dependent fraction of sites not in a bond. When combined with the Parsons--Lee hard-body theory, the orientationally resolved perturbation theory provides quantitatively reliable results for the structural properties and phase behaviour. Therefore, the generalised Wertheim theory together with Parsons-Lee theory can be suitable in higher dimensions, too.

cond-mat.soft↗

arXiv2026

Density Profiles and Direct Correlation Functions from Density Functional Theory in Binary Hard-Sphere Crystals: Substitutional Solid and Interstitial Solid Solution

We determine the fully resolved equilibrium density profiles for two binary hard-sphere crystal structures using classical density functional theory through the White Bear II functional from fundamental measure theory. While for the substitutional crystal, in which some hard spheres are replaced by spheres of slightly smaller diameter, the density profiles are rather similar to the single-component case (narrow Gaussian peaks centered at fcc lattice sites), we observe a more complex behavior for the case of interstitial solid solutions, where the small species is fairly delocalized in the unit cell. Further, we compute the species-resolved inhomogeneous two-body direct correlation functions, depending on two three-dimensional vectors, for these two types of binary crystals. The large--large components are mainly determined by the vacancy concentration $n_\text{vac}$ and show a characteristic magnitude $\sim 1/n_\text{vac}$. Based on this observation, we propose a simple geometric picture. The components of the direct correlation function involving the small spheres substantially differ in interstitial solid solutions from those of the substitutional crystal.

cond-mat.stat-mech↗

arXiv2026

Non-monotonic roughness evolution in film growth on weakly interacting substrates

Thin film deposition on weakly interacting substrates exhibits a unique growth mode characterized by initially strong island formation and rapidly increasing roughness, which reaches a maximum and subsequently decreases as the film returns to a smooth morphology. Here we show this rough-to-smooth growth mode experimentally for two molecular systems with substantially different geometries, namely, the effectively spherical buckminsterfullerene (C$_{60}$) and the disk-like 1,4,5,8,9,11-hexaazatriphenylenehexacarbonitrile (HATCN). This growth mode is explained by a geometrical model that captures the basic mechanisms of multilayer island growth, island coalescence, and formation of a continuous film. Additionally, kinetic Monte Carlo simulations with minimal ingredients demonstrate that this mode generally occurs for weakly interacting substrates, providing quantitative estimates of parameters that characterize adsorbate-adsorbate and adsorbate-substrate interactions. Both the model and simulations accurately describe the experimental data and highlight the generic nature of the phenomenon, independently of the details of the interactions and the molecular flux, which opens up a path for controlling nanoscale film roughness.

cond-mat.mtrl-sci↗

arXiv2025

(Dis-)appearance of liquid-liquid phase transitions in a heterogeneous activated patchy particle model and experiment

The ion-activated patchy particle model is an important theoretical framework to investigate the phase behaviour of globular proteins in the presence of multivalent ions. In this work, we study and highlight the influence of patch heterogeneity on the extension, appearance and disappearance of the liquid-liquid coexistence region of the phase diagram. We demonstrate that within this model the binding energy between salt ions and patches of different type is a key factor in determining the phase behavior. Specifically, we show under which conditions liquid-liquid phase separation (LLPS) in these systems can appear or disappear for varying binding energy and ion-mediated attraction energy between ion-occupied and unoccupied patches. In particular we address the influence of the patch type dependence of these energies on the (dis)appearance of LLPS. These results rationalize our new results on ion-dependent liquid-liquid phase separation in solutions of bovine serum albumine with trivalent cations. In comparison with models with non-activated patches, where the gas-liquid transition disappears when the number of patches approaches two, we find the complementary mechanism that ions may shift the attractions from stronger to weaker patches (with an accompanying disappearance of the transition), if their binding energy to the patches changes. The results have implications for the understanding of charge-driven LLPS in biological systems and its suppression.

cond-mat.soft↗

arXiv2025

Emergence of mixed orientational ordering in quasi-one-dimensional superdisk and superball fluids

We report the discovery of a mixed orientational structure in the quasi-one-dimensional fluid of hard non-spherical bodies with the exact calculation of the thermodynamic and structural quantities using the transfer operator method. The mixed arrangement, which is spatially uniform, but orientionally ordered, cannot be identified with conventional mesophases such as tetratic, cubatic and nematic. It is found that the particles form a mixed orientational arrangement with preferred parallel and perpendicular orientations in a channel, where the number of parallel and perpendicularly oriented particles is not equal even at the close packing density. The mixed structure can be stabilized with hard bodies having equal side lengths in parallel and perpendicular orientations along the channel. These conditions can be realized with colloidal superdisks (superballs) if the curvature of neighboring sides (faces) are different. We show that even a small stretching of the superparticle destabilizes mixed ordering due to perfect nematic order evolving upon approaching close-packing.

cond-mat.soft↗

arXiv2025

Competition between shape anisotropy and deformation in the ordering and close packing properties of quasi-one-dimensional hard superellipse fluids

We investigate the orientational ordering and close-packing behavior of a quasi-one-dimensional (q1D) system of hard superellipses, where the centers of the particles are confined to a line, but they can rotate freely within a two-dimensional plane. The particle shape is tuned between an ellipse and a rectangle by varying the deformation parameter (n). The elongation of the particle is changed using the aspect ratio (k). The pressure ratio between freely rotating and parallel hard superellipses, which displays a single peak, serves as an effective marker for the continuous structural change from quasi-isotropic to nematic ordering. Our findings reveal a competition between the parameters k and n, with k promoting nematic alignment and n favoring tetratic ordering. Notably, in the close-packing regime, the packing properties become independent of k, as the relevant exponents depend solely on n. Furthermore, certain combinations of these exponents exhibit universality, remaining invariant with respect to particle shape

cond-mat.soft↗

arXiv2025

Neural Density Functional Theory in Higher Dimensions with Convolutional Layers

Based on recent advancements in using machine learning for classical density functional theory for systems with one-dimensional, planar inhomogeneities, we propose a machine learning model for application in two dimensions (2D) akin to density functionals in weighted density forms, as e. g. in fundamental measure theory (FMT). We implement the model with fast convolutional layers only and apply it to a system of hard disks in fully 2D inhomogeneous situations. The model is trained on a combination of smooth and steplike external potentials in the fluid phase. Pair correlation functions from test particle geometry show very satisfactory agreement with simulations although these types of external potentials have not been included in the training. The method should be fully applicable to 3D problems, where the bottleneck at the moment appears to be in obtaining smooth enough 3D histograms as training data from simulations.

cond-mat.stat-mech↗

arXiv2024

Island formation in heteroepitaxial growth

Island formation in strain-free heteroepitaxial deposition of thin films is analyzed using kinetic Monte Carlo simulations of two minimal lattice models and scaling approaches. The transition from layer-by-layer (LBL) to island (ISL) growth is driven by a weaker binding strength of the substrate which, in the kinetic model, is equivalent to an increased diffusivity of particles on the substrate compared to particles on the film. The LBL-ISL transition region is characterized by particle fluxes between layers 1 and 2 significantly exceeding the net flux between them, which sets a quasi-equilibrium condition. Deposition on top of monolayer islands weakly contributes to second layer nucleation, in contrast with the homoepitaxial growth case. A thermodynamic approach for compact islands with one or two layers predicts the minimum size in which the second layer is stable. When this is linked to scaling expressions for submonolayer island deposition, the dependence of the ISL-LBL transition point on the kinetic parameters qualitatively matches the simulation results, with quantitative agreement in some parameter ranges. The transition occurs in the equilibrium regime of partial wetting and the convergence of the transition point upon reducing the deposition rate is very slow and practically unattainable in experiments.

cond-mat.soft↗

arXiv2024

The orientational structure of a model patchy particle fluid: simulations, integral equations, density functional theory and machine learning

We investigate the orientational properties of a homogeneous and inhomogeneous tetrahedral 4-patch fluid (Kern--Frenkel model). Using integral equations, either (i) HNC or (ii) a modified HNC scheme with simulation input, the full orientational dependence of pair and direct correlation functions is determined. Density functionals for the inhomogeneous problem are constructed via two different methods. The first, molecular density functional theory, utilizes the full direct correlation function and an isotropic hard-sphere bridge functional. The second method, a machine learning approach, uses a decomposition of the functional into an isotropic reference part and a mean-field orientational part, where both parts are improved by machine learning techniques. Comparison to simulation data at hard walls and around hard tracers show a similar performance of the two functionals. Machine learning strategies are discussed to eliminate residual differences, with the goal of obtaining machine-learning enhanced functionals for the general anisotropic fluid.

cond-mat.soft↗

arXiv2024

Effective patchiness from critical points of a coarse-grained protein model with explicit shape and charge anisotropy

Colloidal model systems are successful in rationalizing emergent phenomena like aggregation, rheology and phase behaviour of protein solutions. Colloidal theory in conjunction with isotropic interaction models is often employed to estimate the stability of such solutions. In particular, a universal criterion for the reduced second virial coefficient at the critical point $B_2^*$ is frequently invoked which is based on the behavior of short-range attractive fluids (Noro-Frenkel rule, $B_2^*\approx-1.5$). However, if anisotropic models for the protein-protein interaction are considered, e.g. the Kern-Frenkel (KF) patchy particle model, the value of the $B_2^*$ criterion is shifted to lower values and explicitly depends on the number of patches. If an explicit shape anisotropy is considered, as e.g. in a coarse-grained protein model, the normalization of $B_2^*$ becomes ambiguous to some extent, as no unique exclusion volume can be defined anymore. Here, we investigate a low-resolution, coarse-grained model for the globular protein bovine serum albumin (BSA) and study effects of charge-anisotropy on the phase diagram (determined by simulations) at the isoelectric point. We present methods of assigning an ``effective patchiness'' to our protein model by comparing its critical properties to the KF model. We find that doubling the native charges increases the critical temperature $T_c$ by $\approx$ 14 % and that our BSA model can be compared to a 3 to 5 patch KF model. Finally, we argue that applying existing $B_2^*$ criteria from colloidal theory should be done with care, due to multiple, physically plausible ways of how to assign effective diameters to shape-anisotropic models.

cond-mat.soft↗

arXiv2024

Universality of the close packing properties and markers of isotropic-to-tetratic crossover in quasi-one-dimensional superdisk fluid

We study equilibrium states and ordering regimes of a quasi-one-dimensional system of hard superdisks (anisotropic particles interpolating between disks and squares) where the centers of the particles are constrained to move on a line. A continuous change from a quasi-isotropic to a tetratic regime is found upon increasing the density. Somewhat unexpected, for isobaric states, systems with larger and more anisotropic particles in the tetratic regime are denser than systems with smaller and less anisotropic particles in a quasi-isotropic regime. Close packing behaviour is characterised by exponents describing the behaviour of the pressure, the angular fluctuations and the angular correlation length. We obtain two universal, shape-independent relations between them.

cond-mat.soft↗

arXiv2024

Machine Learning approaches to classical density functional theory

In this chapter, we discuss recent advances and new opportunities through methods of machine learning for the field of classical density functional theory, dealing with the equilibrium properties of thermal nano- and micro-particle systems having classical interactions. Machine learning methods offer the great potential to construct and/or improve the free energy functional (the central object of density functional theory) from simulation data and thus they complement traditional physics- or intuition-based approaches to the free energy construction. We also give an outlook to machine learning efforts in related fields, such as liquid state theory, electron density functional theory and power functional theory as a functionally formulated approach to classical nonequilibrium systems.

cond-mat.stat-mech↗

arXiv2023

Machine learning of a density functional for anisotropic patchy particles

Anisotropic patchy particles have become an archetypical statistical model system for associating fluids. Here we formulate an approach to the Kern-Frenkel model via classical density functional theory to describe the positionally and orientationally resolved equilibrium density distributions in flat wall geometries. The density functional is split into a reference part for the orientationally averaged density and an orientational part in mean-field approximation. To bring the orientational part into a kernel form suitable for machine learning techniques, an expansion into orientational invariants and the proper incorporation of single-particle symmetries is formulated. The mean-field kernel is constructed via machine learning on the basis of hard wall simulation data. Results are compared to the well-known random-phase approximation which strongly underestimates the orientational correlations close to the wall. Successes and shortcomings of the mean-field treatment of the orientational part are highlighted and perspectives are given for attaining a full density functional via machine learning.

cond-mat.stat-mech↗

arXiv2023

Lattice Fundamental Measure Theory beyond 0D Cavities: Dimers on Square Lattices

Using classical density functional theory, we study the behavior of dimers, i.e. hard rods of length $L=2$, on a two-dimensional cubic lattice. For deriving a free energy functional, we employ Levy's prescription which is based on the minimization of a microscopic free energy with respect to the many-body probability under the constraint of a fixed density profile. Using that, we recover the functional originally found by Lafuente and Cuesta and derive an extension. With this extension, the free energy functional is exact on cavities that can hold at most two particles simultaneously. The new functional improves the prediction of the free energy in bulk as well as in highly confined systems, especially for high packing fractions, in comparison to that of Lafuente and Cuesta.

cond-mat.stat-mech↗

arXiv2021

Interplay of orientational order and roughness in simulated thin film growth of anisotropically interacting particles

Roughness and orientational order in thin films of anisotropic particles are investigated using kinetic Monte Carlo simulations on a cubic lattice. Anisotropic next-neighbor interactions between the lattice particles were chosen to mimic the effects of shape anisotropy in the interactions of disc- or rod-like molecules with van-der-Waals attractions. Increasing anisotropy leads first to a preferred orientation in the film (which is close to the corresponding equilibrium transition) while the qualitative mode of roughness evolution (known from isotropic systems) does not change. At strong anisotropies, an effective step-edge (Ehrlich-Schwoebel) barrier appears and a non-equilibrium roughening effect is found, accompanied by re-ordering in the film which can be interpreted as the nucleation and growth of domains of lying-down discs or rods. The information on order and roughness is combined into a diagram of dynamic growth modes.

cond-mat.soft↗

arXiv2021

Elasticity in crystals with high density of local defects : insights from ultra-soft colloids

In complex crystals close to melting or at finite temperatures, different types of defects are ubiquitous and their role becomes relevant in the mechanical response of these solids. Conventional elasticity theory fails to provide a microscopic basis to include and account for the motion of point-defects in an otherwise ordered crystalline structure. We study the elastic properties of a point-defect rich crystal within a first-principles theoretical framework derived from microscopic equations of motion. This framework allows us to make specific predictions pertaining to the mechanical properties which we can validate through deformation experiments performed in Molecular Dynamics simulations.

cond-mat.soft↗