arXiv ScienceSearch

arXiv subjects

Martin Magnuson

Publications and source records attributed to Martin Magnuson.

At least 19 recordsLinked to original sources

Local coordination, structural softening, and polarization-switching energetics in Sc-alloyed GaN

Sc-alloyed wurtzite nitrides exhibit strongly tunable electromechanical and ferroelectric properties, yet the relationship between their lattice evolution and local bonding environment remains insufficiently established, particularly in Sc$_x$Ga$_{1-x}$N. Here, we investigate the structural and local bonding evolution of Sc$_x$Ga$_{1-x}$N across the dilute-to-intermediate composition range by combining X-ray diffraction, Sc K-edge X-ray absorption near edge structure (XANES), extended X-ray absorption fine structure (EXAFS) and first-principles calculations. Sc incorporation produces an anisotropic lattice expansion and a progressive reduction in the c/a ratio. XANES and EXAFS reveal a concurrent modification of the local environment around Sc, with the effective Sc-N coordination number increasing from 4.1(4) to 4.5(2) and the average Sc-N bond length increasing from 2.045(7) to 2.081(8){\AA} over x=0.06-0.26. The local response is accompanied by a reduction in the Sc K-edge pre-edge intensity, consistent with a gradual reduction of the local tetrahedral asymmetry. First-principles calculations show that these structural changes are associated with site-selective distortions around Sc and progressive flattening of the structural energy landscape. The calculated intrinsic polarization-switching barrier decreases from 24.2 to 19.0 meV/{\AA}$^3$ with increasing Sc content, while the calculated piezoelectric stress coefficient (e$_{33}$) increases from 0.82 to 1.66~C/m$^2$ and elastic constant (C$_{33}$) decreases from 380 to 227~GPa, resulting in an increase of piezoelectric strain coefficient (d$_{33}$) from 2.99 to 12.46~pC/N. These results show that Sc incorporation progressively modifies the local coordination environment and structural energetics of ScGaN while the long-range wurtzite structure remains preserved over the investigated composition range.

cond-mat.mtrl-sci

Questioning van der Waals Epitaxy of Non-Layered Materials on Mica: The Case of ScN

Growing stress-free epitaxial films by van der Waals epitaxy (vdWE) is of interest for realizing flexible optoelectronics and energy devices from freestanding epilayers. However, vdWE of non-layered materials is often presumed or claimed on layered substrates such as mica with inadequate experimental evidence. Here, we demonstrate that the growth of single-domain rocksalt ScN(111) films by sputter deposition on fluorophlogopite mica(001) occurs by conventional epitaxy. X-ray diffraction and electron microscopy reveal the film/substrate epitaxial relationship to be [-101](111)ScN||[010](001)mica. Our results indicating strain buildup seen from the dependence of (111) interplanar spacings, and strain relaxation by dislocation generation, question prior claims of vdWE of non-layered metal nitrides on mica. Our findings show that conventional epitaxy should be the default assumption for non-layered materials unless conditions for vdWE are explicitly established.

cond-mat.mtrl-sci

Fermiology and Band Structure of Oxygen-Terminated Ti3C2Tx MXene

The class of two-dimensional carbides and nitrides known as MXenes exhibit remarkable electronic properties. Tailoring these properties, however, requires an in-depth understanding of the band structure and Fermi-surface topology. Surface oxidation of MXenes has previously hampered the characterization of their Fermi surface, which is crucial for understanding the topology and anisotropy in the electronic structure and, ultimately, for tailoring electronic properties. Here, we reveal the Fermi surface topology and band structure of purely oxygen-terminated Ti3C2Tx MXene achieved through rigorous thin film sample preparation and ultrahigh vacuum annealing. Polarized synchrotron radiation-based angle-resolved photoemission spectroscopy reveals electron pockets, bulk band gaps, and a Dirac-like feature in the anisotropic electronic band structure. This paves the way for a fundamental understanding of band engineering of electronic transport properties, providing insights of importance for energy storage devices, transparent conductors, and catalysis.

cond-mat.mtrl-sci

Physico-thermal and geochemical behavior and alteration of the Au indicator gangue hydrothermal quartz at the Kubi Gold Ore Deposits

Altered and gangue quartz in hydrothermal veins from the Kubi Gold deposit in Dunkwa on Offin in the central region of Ghana are investigated for possible Au-associated indicator minerals and to provide the understanding and increase the knowledge of the mineral hosting and alteration processes in quartz. X-ray diffraction, air annealing furnace, differential scanning calorimetry, energy dispersive X-ray spectroscopy, and transmission electron microscopy have been applied on different quartz types outcropping from surface and bedrocks at the Kubi Gold Mining to reveal the material properties at different temperatures. From the diffraction results of the fresh and annealed quartz samples, we find that the samples contain indicator and the impurity minerals iron disulfide, biotite, titanium oxide, and magnetite. These minerals, under oxidation process between 574-1400 {\deg}C temperatures experienced hematite alterations and a transformation from {\alpha}-quartz to \b{eta}-quartz and further to cristobalite as observed from the calorimetry scans for hydrothermally exposed materials. The energy dispersive spectroscopy revealed elemental components of Fe, S, Mg, K, Al, Ti, Na, Si, O, and Ca contained in the samples, and these are attributed to the impurity phase minerals observed in the diffraction. The findings also suggest that during the hydrothermal flow regime, impurity minerals and metals can be trapped by voids and faults. Under favorable temperature conditions, the trapped minerals can be altered to change color at different depositional stages by oxidation and reduction processes leading to hematite alteration which is a useful indicator mineral in mineral exploration.

physics.geo-ph

Interaction and kinetics of H2, CO2, and H2O on Ti3C2Tx MXene probed by X-ray photoelectron spectroscopy

One of the most explored MXenes is Ti3C2Tx, where Tx is designated to inherently form termination species. Among many applications, Ti3C2Tx is a promising material for energy storage, energy conversion, and CO2-capturing devices. However, active sites for adsorption and surface reactions on the Ti3C2Tx-surface are still open questions to explore, which have implications for preparation methods when to obtain correct and optimized surface requirements. Here we use X-ray photoelectron spectroscopy (XPS) to study the adsorption of common gas molecules such as H2, CO2, and H2O, which all may be present in energy storage, energy converting, and CO2-capturing devices based on Ti3C2Tx. The study shows that H2O, with a strong bonding to the Ti-Ti bridge-sites, can be considered as a termination species. An O and H2O terminated Ti3C2Tx-surface restricts the CO2 adsorption to the Ti on-top sites and may reduce the ability to store positive ions, such as Li+ and Na+. On the other hand, an O and H2O terminated Ti3C2Tx-surface shows the capability to split water. The results from this study have implications for the correct selection of MXene preparations and the environment around the MXene in different implementations, such as energy storage, CO2-capturing, energy conversion, gas sensing, and catalysts.

cond-mat.mtrl-sci

Electronic structure and thermoelectric properties of epitaxial Sc1-xVxNy thin films grown on MgO(001)

The electronic structure of Sc1-xVxNy epitaxial films with different alloying concentrations of V are investigated with respect to effects on thermoelectric properties. Band structure calculations on Sc0.75V0.25N indicate that V 3d states lie in the band gap of the parent ScN compound in the vicinity of the Fermi level. Thus, theoretically the presence of light (dispersive) bands at the {\Gamma}-point with band multiplicity is expected to lead to lower electrical resistivity while flat (heavy) bands at X-W-K symmetry points are associated with higher Seebeck coefficient than that of ScN. With this aim, epitaxial Sc1-xVxNy thin film samples were deposited on MgO(001) substrates. All the samples showed N substoichiometry and pseudocubic crystal structure. The N-vacancy-induced states were visible in the Sc 2p XAS spectra. The reference ScN and Sc1-xVxNy samples up to x = 0.12 were n type, exhibiting carrier concentration of 1021 cm-3, typical for degenerate semiconductors. For the highest V alloying of x = 0.15, holes became the majority charge carrier as indicated by the positive Seebeck coefficient. The underlying electronic structure and bonding mechanism in Sc1-xVxNy influence the electrical resistivity, Seebeck coefficient, and Hall effect. Thus, the work contributes to the fundamental understanding of the correlated defects and thermoelectric properties to the electronic structure in Sc-N system with V alloying.

cond-mat.mtrl-sci

Thermoelectric properties and electronic structure of Cr(Mo,V)Nx thin films studied by synchrotron and lab-based X-ray spectroscopy

Chromium-based nitrides are used in hard, resilient coatings, and show promise for thermoelectric applications due to their combination of structural, thermal, and electronic properties. Here, we investigated the electronic structures and chemical bonding correlated to the thermoelectric properties of epitaxially grown chromium-based multicomponent nitride Cr(Mo,V)Nx thin films. Due to minuscule N vacancies, finite population of Cr 3d and N 2p states appear at the Fermi level and diminishes the band opening for Cr0.51N0.49. Incorporating holes by alloying V in N deficient CrN matrix results in enhanced thermoelectric power factor with marginal change in the charge transfer of Cr to N compared to Cr0.51N0.49. Further alloying Mo isoelectronic to Cr increases the density of states across the Fermi level due to hybridization of the (Cr, V) 3d and Mo 4d-N 2p states in Cr(Mo,V)Nx. The hybridization effect with reduced N 2p states off from stoichiometry drives the system towards metal like electrical resistivity and reduction in Seebeck coefficient compensating the overall power factor still comparable to Cr0.51N0.49. The N deficiency also depicts a critical role in reduction of the charge transfer from metal to N site. The present work envisages ways for enhancing thermoelectric properties through electronic band engineering by alloying and competing effects of N vacancies.

cond-mat.mtrl-sci

The Origin of Ti 1s XANES Main Edge Shifts and EXAFS Oscillations in the Energy Storage Materials Ti2CTx and Ti3C2Tx MXenes

A potential application of two-dimensional (2D) MXenes, such as Ti2CTx and Ti3C2Tx, is energy storage devices, such as supercapacitors, batteries, and hydride electrochemical cells, where intercalation of ions between the 2D layers is considered as a charge carrier. Electrochemical cycling investigations in combination with Ti 1s X-ray absorption spectroscopy (XAS) have therefore been performed with the objective to study oxidation state changes during potential variations. In some of these studies Ti3C2Tx has shown main edge shifts in the Ti 1s X-ray absorption near-edge structure (XANES). Here we show that these main edge shifts originate from the Ti 4p orbital involvement in the bonding between the surface Ti and the termination species at the fcc-sites. The study further shows that the t2g-eg crystal field splitting (10Dq) observed in the pre-edge absorption region indicate weaker Ti-C bonds in Ti2CTx and Ti3C2Tx compared to TiC and the corresponding MAX phases. The results from this study provide information necessary for improved electronic modeling and subsequently a better description of the materials properties of the MXenes. In general, potential applications, where surface interactions with intercalation elements are important processes, will benefit from the new knowledge presented.

cond-mat.mtrl-sci

Rhombohedral and Turbostratic Boron Nitride Polytypes Investigated by X-ray Absorption Spectroscopy

The electronic structure of rhombohedral sp2 hybridized boron nitride (r-BN) is characterized by X-ray absorption near-edge structure spectroscopy. Measurements are performed at the boron and nitrogen K-edges (1s) and interpreted with first-principles density functional theory calculations, including final state effects by applying a core-hole. We show that it is possible to distinguish between different 2D planar polytypes such as rhombohedral, twinned rhombohedral, hexagonal and turbostratic BN by the difference in chemical shifts. In particular, the chemical shift at the B 1s-edge is shown to be significant for the turbostratic polytype. This implies that the band gap can be tuned by a superposition of different polytypes and stacking of lattice planes.

cond-mat.mtrl-sci

Review of Transition-Metal Diboride Thin Films

We review the thin film growth, chemistry, and physical properties of Group 4-6 transition-metal diboride (TMB2) thin films with AlB2-type crystal structure (Strukturbericht designation C32). Industrial applications are growing rapidly as TMB2 begin competing with conventional refractory ceramics like carbides and nitrides, including pseudo-binaries such as Ti1-xAlxN. The TMB2 crystal structure comprises graphite-like honeycombed atomic sheets of B interleaved by hexagonal close-packed TM layers. From the C32 crystal structure stems unique properties including high melting point, hardness, and corrosion resistance, yet limited oxidation resistance, combined with high electrical conductivity. We correlate the underlying chemical bonding, orbital overlap, and electronic structure to the mechanical properties, resistivity, and high-temperature properties unique to this class of materials. The review highlights the importance of avoiding contamination elements (like oxygen) and boron segregation on both the target and substrate sides during sputter deposition, for better-defined properties, regardless of the boride system investigated. This is a consequence of the strong tendency for B to segregate to TMB2 grain boundaries for boron-rich compositions of the growth flux. It is judged that sputter deposition of TMB2 films is at a tipping point towards a multitude of applications for TMB2 not solely as bulk materials, but also as protective coatings and electrically conducting high-temperature stable thin films.

cond-mat.mtrl-sci

Elucidating Pathfinding Elements from the Kubi Gold Mine in Ghana

X-ray photoelectron spectroscopy (XPS) and energy-dispersive X-ray spectroscopy (EDX) are applied to investigate the properties of fine-grained concentrate on artisanal small-scale gold mining samples from the Kubi Gold Project of the Asante Gold Corporation near Dunwka-on-Offin in the Central Region of Ghana. Both techniques show that the Au-containing residual sediments are dominated by the host elements Fe, Ag, Al, N, O, Si, Hg, and Ti that either form alloys with gold or inherent elements in the sediments. For comparison, a bulk nugget sample mainly consisting of Au forms an electrum i.e., a solid solution with Ag. Untreated (impure) sediments, fine-grained Au concentrate, coarse-grained Au concentrate, and processed ore (Au bulk/nugget) samples were found to contain cluster of O, C, N, and Ag with Au concentrations significantly lower than that of the related elements. This finding can be attributed to primary geochemical dispersion, which evolved from crystallization of magma and hydrothermal liquids as well as migration of metasomatic elements and rapid rate of chemical weathering of lateralization in secondary processes. The results indicate that Si and Ag are strongly concomitants with Au because of their eutectic characteristics N, C, and O follow alongside because of their affinity to Si. These non-noble elements thus act as pathfinders of Au ores in the exploration area. The paper further discusses relationships between gold and sediments of auriferous lodes as key to determine indicator minerals of gold in mining sites

cond-mat.mtrl-sci

Chemical Bonding of Termination Species in 2D Carbides Investigated through Valence Band UPS/XPS of Ti3C2Tx MXene

MXenes are technologically interesting 2D materials that show potential in numerous applications. The properties of the MXenes depend at large extent on the selection of elements that build the 2D MX-layer. Another key parameter for tuning the attractive material properties is the species that terminate the surfaces of the MX-layers. Although being an important parameter, experimental studies on the bonding between the MX-layers and the termination species are few and thus an interesting subject of investigation. Here we show that the termination species fluorine (F) bonds to the Ti3C2-surface mainly through Ti 3p - F 2p hybridization and that oxygen (O) bonds through Ti 3p - O 2p hybridization with a significant contribution of Ti 3d and Ti 4p. The study further shows that the Ti3C2-surface is not only terminated by F and O on the threefold hollow face-centered-cubic (fcc) site. A significant amount of O sits on a bridge site bonded to two Ti surface atoms on the Ti3C2-surface. In addition, the results provide no support for hydroxide (OH) termination on the Ti3C2-surface. On the contrary, the comparison of the valence band intensity distribution obtained through ultraviolet- and x-ray photoelectron spectroscopy with computed spectra by density of states, weighed by matrix elements and sensitivity factors, reveals that OH cannot be considered as an inherent termination species in Ti3C2Tx. The results from this study have implications for correct modeling of the structure of MXenes and the corresponding materials properties. Especially in applications where surface composition and charge are important, such as supercapacitors, Li-ion batteries, electrocatalysis, and fuel- and solar cells, where intercalation processes are essential.

cond-mat.mtrl-sci

Characterization and identification of Au pathfinder minerals from an artisanal mine site using X-ray diffraction

Gold-associated pathfinder minerals have been investigated by identifying host minerals of Au for samples collected from an artisanal mining site near a potential gold mine (Kubi Gold Project) in Dunkwa-On-Offin in the central region of Ghana. We find that for each composition of Au powder (impure) and the residual black hematite/magnetite sand that remains after gold panning, there is a unique set of associated diverse indicator minerals. These indicator minerals are identified as SiO2 (quartz), Fe3O4 (magnetite), and Fe2O3 (hematite), while contributions from pyrite, arsenopyrites, iridosmine, scheelite, tetradymite, garnet, gypsum, and other sulfate materials are insignificant. This constitutes a confirmative identification of Au pathfinding minerals in this particular mineralogical area. The findings suggest that X-ray diffraction could also be applied in other mineralogical sites to aid in identifying indicator minerals of Au and the location of ore bodies at reduced environmental and exploration costs.

cond-mat.mtrl-sci

Local chemical bonding and structural properties in Ti3AlC2 MAX phase and Ti3C2Tx MXene probed by Ti 1s X-ray absorption spectroscopy

The chemical bonding within the transition-metal carbide materials MAX phase Ti3AlC2 and MXene Ti3C2Tx is investigated by X-ray absorption near-edge structure (XANES) and extended X-ray absorption fine structure (EXAFS) spectroscopies. MAX phases are inherently nanolaminated materials that consist of alternating layers of Mn+1Xn and monolayers of an A-element from the IIIA or IVA group in the periodic table, where M is a transition metal and X is either carbon or nitrogen. Replacing the A-element with surface termination species Tx will separate the Mn+1Xn-layers forming two-dimensional (2D) flakes of Mn+1XnTx. For Ti3C2Tx the Tx corresponds to fluorine (F) and oxygen (O) covering both sides of every single 2D Mn+1Xn-flake. The Ti K-edge (1s) XANES of both Ti3AlC2 and Ti3C2Tx exhibit characteristic pre-edge absorption regions of C 2p - Ti 3d hybridization with clear crystal-field splitting's while the main-edge absorption features originate from the Ti 1s -> 4p excitation, where only the latter shows sensitivity towards the fcc-site occupation of the termination species. The coordination numbers obtained from EXAFS show that Ti3AlC2 and Ti3C2Tx are highly anisotropic with a strong in-plane contribution for Ti and with a dynamic out-of-plane contribution from the Al monolayers and termination species, respectively. As shown in the temperature-dependent measurements, the O contribution shifts to shorter bond length while the F diminishes as the temperature is raised from room temperature up to 750 {\deg}C.

cond-mat.mtrl-sci

Interface Bonding of Zr1-xAlxN Nanocomposites Investigated by X-ray Spectroscopies and First Principles Calculations

The electronic structure, chemical bonding and interface component in ZrN-AlN nanocomposites formed by phase separation during thin film deposition of metastable Zr1-xAlxN (x=0.0, 0.12, 0.26, 0.40) is investigated by resonant inelastic X-ray scattering/X-ray emission and X-ray absorption spectroscopy and compared to first-principles calculations including transitions between orbital angular momentum final states. The experimental spectra are compared with different interface-slab model systems using first-principle all electron full-potential calculations where the core states are treated fully relativistic. As shown in this work, the bulk sensitivity and element selectivity of X-ray spectroscopy enables to probe the symmetry and orbital directions at interfaces between cubic and hexagonal crystals. We show how the electronic structure develop from local octahedral bond symmetry of cubic ZrN that distorts for increasing Al content into more complex bonding. This results in three different kinds of bonding originating from semi-coherent interfaces with segregated ZrN and lamellar AlN nanocrystalline precipitates. An increasing chemical shift and charge transfer between the elements takes place with increasing Al content and affects the bond strength and increases resistivity.

cond-mat.mtrl-sci

Magnetic anisotropy in Cr$_2$GeC investigated by X-ray magnetic circular dichroism and \textit{ab initio} calculations

The magnetism in the inherently nanolaminated ternary MAX-phase Cr$_{2}$GeC is investigated by element-selective, polarization and temperature-dependent, soft X-ray absorption spectroscopy and X-ray magnetic circular dichroism. The measurements indicate an antiferro-magnetic Cr-Cr coupling along the $c$-axis of the hexagonal structure modulated by a ferromagnetic ordering in the nanolaminated $ab$-basal planes. The weak chromium magnetic moments are an order of magnitude stronger in the nanolaminated planes than along the vertical axis. Theoretically, a small but notable, non-spin-collinear component explains the existence of a non-perfect spin compensation along the $c$-axis. As shown in this work, this spin distortion generates an overall residual spin moment inside the unit cell resembling that of a ferri-magnet. Due to the different competing magnetic interactions, electron correlations and temperature effects both need to be considered to achieve a correct theoretical description of the Cr$_{2}$GeC magnetic properties.

cond-mat.mtrl-sci

Reactive magnetron sputtering of tungsten target in krypton/trimethylboron atmosphere

W-B-C films were deposited on Si(100) substrates held at elevated temperature by reactive sputtering from a W target in Kr/trimethylboron (TMB) plasmas. Quantitative analysis by X-ray photoelectron spectroscopy (XPS) shows that the films are W-rich between ~ 73 and ~ 93 at.% W. The highest metal content is detected in the film deposited with 1 sccm TMB. The C and B concentrations increase with increasing TMB flow to a maximum of ~18 and ~7 at.%, respectively, while the O content remains nearly constant at 2-3 at.%. Chemical bonding structure analysis performed after samples sputter-cleaning reveals C-W and B-W bonding and no detectable W-O bonds. During film growth with 5 sccm TMB and 500 oC or with 10 sccm TMB and 300-600 oC thin film X-ray diffraction shows the formation of cubic 100-oriented WC1-x with a possible solid solution of B. Lower flows and lower growth temperatures favor growth of W and W2C, respectively. Depositions at 700 and 800 oC result in the formation of WSi2 due to a reaction with the substrate. At 900 oC, XPS analysis shows ~96 at.% Si in the film due to Si interdiffusion. Scanning electron microscopy images reveal a fine-grained microstructure for the deposited WC1-x films. Nanoindentation gives hardness values in the range from ~23 to ~31 GPa and reduced elastic moduli between ~220 and 280 GPa in the films deposited at temperatures lower than 600 oC. At higher growth temperatures the hardness decreases by a factor of 3 to 4 following the formation of WSi2 at 700-800 oC and Si-rich surface at 900 oC.

cond-mat.mtrl-sci

Vibrational Effects in X-ray Absorption Spectra of 2D Layered Materials

With the examples of the C $K$-edge in graphite and the B $K$-edge in hexagonal BN, we demonstrate the impact of vibrational coupling and lattice distortions on the X-ray absorption near-edge structure (XANES) in 2D layered materials. Theoretical XANES spectra are obtained by solving the Bethe-Salpeter equation of many-body perturbation theory, including excitonic effects through the correlated motion of core-hole and excited electron. We show that accounting for zero-point motion is important for the interpretation and understanding of the measured X-ray absorption fine structure in both materials, in particular for describing the $\sigma^*$-peak structure.

cond-mat.mtrl-sci