arXiv subjects

Martin Falk

Publications and source records attributed to Martin Falk.

7 recordsLinked to original sources

arXiv2026

A single platform with van der Pauw geometry for measurement of Seebeck coefficient, resistivity, and Hall effect of thin films

A modular thermoelectric properties measurement setup in van der Pauw configuration was developed for a straightforward and simultaneous measurement of electrical resistivity and Seebeck coefficient in an extensive temperature range of 25{\deg}C - 600{\deg}C and can also perform Hall measurements at room temperature. The setup is optimized for accurate measurement of voltages and temperatures gradients by minimizing possible errors from offset voltages, wire contributions and thermal contact resistances which helps getting reliable data. The setup is user friendly, and the measurements are fully automated and controlled using a LabVIEW program. The detachable modules make this setup quite versatile and provide an all-in-one (except thermal conductivity) solution for thermoelectric measurements.

physics.ins-det↗

arXiv2025

Topology-Aware Volume Fusion for Spectral Computed Tomography via Histograms and Extremum Graph

Photon-Counting Computed Tomography (PCCT) is a novel imaging modality that simultaneously acquires volumetric data at multiple X-ray energy levels, generating separate volumes that capture energy-dependent attenuation properties. Attenuation refers to the reduction in X-ray intensity as it passes through different tissues or materials. This spectral information enhances tissue and material differentiation, enabling more accurate diagnosis and analysis. However, the resulting multivolume datasets are often complex and redundant, making visualization and interpretation challenging. To address these challenges, we propose a method for fusing spectral PCCT data into a single representative volume that enables direct volume rendering and segmentation by leveraging both shared and complementary information across different channels. Our approach starts by computing 2D histograms between pairs of volumes to identify those that exhibit prominent structural features. These histograms reveal relationships and variations that may be difficult to discern from individual volumes alone. Next, we construct an extremum graph from the 2D histogram of two minimally correlated yet complementary volumes-selected to capture both shared and distinct features-thereby maximizing the information content. The graph captures the topological distribution of histogram extrema. By extracting prominent structure within this graph and projecting each grid point in histogram space onto it, we reduce the dimensionality to one, producing a unified volume. This representative volume retains key structural and material characteristics from the original spectral data while significantly reducing the analysis scope from multiple volumes to one. The result is a topology-aware, information-rich fusion of multi-energy CT datasets that facilitates more effective visualization and segmentation.

cs.HC↗

arXiv2025

The Role of 11B4C Interlayers in Enhancing Fe/Si Multilayer Performance for Polarized Neutron Mirrors

This study investigates the effects of incorporating 11B4C interlayers into Fe/Si multilayers, with a focus on interface quality, reflectivity, polarization, and magnetic properties for polarized neutron optics. It is found that the introduction of 1 {\AA} and 2 {\AA} 11B4C interlayers significantly improves the interface sharpness, reducing interface width and preventing excessive Si diffusion into the Fe layers. X-ray reflectivity and polarized neutron reflectivity measurements show enhanced reflectivity and polarization, with a notable increase in polarization for 30 {\AA} period multilayers. The inclusion of interlayers also helps prevent the formation of iron-silicides, improving both the magnetic properties and neutron optical performance. However, the impact of interlayers is less pronounced in thicker-period multilayers (100 {\AA}), primarily due to the ratio between layer and interface widths. These results suggest that 11B4C interlayers offer a promising route for optimizing Fe/Si multilayer performance in polarized neutron mirrors.

cond-mat.mtrl-sci↗

arXiv2023

Condensed Matter Systems Exposed to Radiation: Multiscale Theory, Simulations, and Experiment

This paper reviews the new highly interdisciplinary research field studying the behavior of condensed matter systems exposed to radiation. The paper highlights several relevant examples of recent advances in the field and provides a roadmap for the development of the field in the next decade. Condensed matter systems exposed to radiation may have very different natures, being inorganic, organic or biological, finite or infinite, be composed of many different molecular species or materials, existing in different phases (solid, liquid, gaseous or plasma) and operating under different thermodynamic conditions. The essential and novel element of this research is that, despite the vast diversity of such systems, many of the key phenomena related to the behavior of irradiated systems (such as radiation-induced damage, mechanisms of damage repair and control, radiation protection, etc.) are very similar and can be understood based on the same fundamental theoretical principles and computational approaches. One of the essential features of the aforementioned phenomena concerns their multiscale nature as the manifestation of the radiation-induced effects occurring at different spatial and temporal scales ranging from the atomic to the macroscopic. The multiscale nature of the effects and similarity of their manifestation in systems of different origins necessarily brings together different disciplines, such as physics, chemistry, biology, materials and nano-science, and biomedical research, demonstrating numerous interlinks and commonalities between them. This research field is highly relevant to many novel and emerging technologies and medical applications.

physics.chem-ph↗

arXiv2020

Structure of a collisionless pair jet in a magnetized electron-proton plasma: Flow-aligned magnetic field

We present the results from a particle-in-cell (PIC) simulation that models the interaction between a spatially localized electron-positron cloud and an electron-ion plasma. The latter is permeated by a magnetic field that is initially spatially uniform and aligned with the mean velocity vector of the pair cloud. The pair cloud expels the magnetic field and piles it up into an electromagnetic piston. Its electromagnetic field is strong enough to separate the pair cloud from the ambient plasma in the direction that is perpendicular to the cloud propagation direction. The piston propagates away from the spine of the injected pair cloud and it accelerates the protons to a high nonrelativistic speed. The accelerated protons form an outer cocoon that will eventually become separated from the unperturbed ambient plasma by a fast magnetosonic shock. No electromagnetic piston forms at the front of the cloud and a shock is mediated here by the filamentation instability. The final plasma distribution resembles that of a hydrodynamic jet. Collisionless plasma jets may form in the coronal plasma of accreting black holes and the interaction between the strong magnetic field of the piston and the hot pair cloud may contribute to radio emissions by such objects.

astro-ph.HE↗

arXiv2018

Inviwo -- A Visualization System with Usage Abstraction Levels

The complexity of today's visualization applications demands specific visualization systems tailored for the development of these applications. Frequently, such systems utilize levels of abstraction to improve the application development process, for instance by providing a data flow network editor. Unfortunately, these abstractions result in several issues, which need to be circumvented through an abstraction-centered system design. Often, a high level of abstraction hides low level details, which makes it difficult to directly access the underlying computing platform, which would be important to achieve an optimal performance. Therefore, we propose a layer structure developed for modern and sustainable visualization systems allowing developers to interact with all contained abstraction levels. We refer to this interaction capabilities as usage abstraction levels, since we target application developers with various levels of experience. We formulate the requirements for such a system, derive the desired architecture, and present how the concepts have been exemplary realized within the Inviwo visualization system. Furthermore, we address several specific challenges that arise during the realization of such a layered architecture, such as communication between different computing platforms, performance centered encapsulation, as well as layer-independent development by supporting cross layer documentation and debugging capabilities.

cs.GR↗

arXiv2015

Mechanical Weyl Modes in Topological Maxwell Lattices

Topological mechanical structures exhibit robust properties protected by topological invariants. In this letter, we study a family of deformed square lattices that display topologically protected zero-energy bulk modes analogous to the massless fermion modes of Weyl semimetals. Our findings apply to sufficiently complex lattices satisfying the Maxwell criterion of equal numbers of constraints and degrees of freedom. We demonstrate that such systems exhibit pairs of oppositely charged Weyl points, corresponding to zero-frequency bulk modes, that can appear at the origin of the Brillouin zone and move away to the zone edge (or return to the origin) where they annihilate. We prove that the existence of these Weyl points leads to a wavenumber-dependent count of topological mechanical states at free surfaces and domain walls.

cond-mat.mes-hall↗